CUSUM charts for monitoring the mean of a multivariate Gaussian process

In this paper control charts for the mean of a multivariate Gaussian process are considered. Using the generalized likelihood ratio approach and the sequential probability ratio test under an additional constraint on the magnitude of the change various types of CUSUM control charts are derived. It is analyzed under which conditions these schemes are directionally invariant. These charts are compared with several other control schemes proposed in literature. The performance of the charts is studied based on the maximum average delay.     

A new distribution-free control scheme based on order statistics

We establish a class of nonparametric Shewhart-type control charts based on a reference sample drawn from the process. The proposed nonparametric control chart takes advantage of the location of two different order statistics of the reference and test sample respectively. The decision rule of the new monitoring scheme is filled out by the number of test observations that are located between the control limits. The general setup of the new class of control charts is presented in detail, while the operating characteristic function is studied for both in- and out-of-control processes. Closed formulae for the evaluation of the alarm rate and the average run length are concluded for plausible shift in the underlying distribution to Lehmann alternatives. Several numerical results, displayed for the new family of nonparametric control charts, depict that the proposed control scheme attains competitive performance.     

Progressive Variance Control Charts for Monitoring Process Dispersion

In a process, the deviation from location or scale parameters affects the quality of the process and waste resources. So it is essential to monitor such processes for possible changes due to any assignable causes. Control charts are the most famous tool used to meet this intention. It is useless to monitor process location until the assurance that process dispersion is in-control. This study proposes some new two-sided memory control charts named as progressive variance (PV) control charts which are based on sample variance to monitor changes in process dispersion assuming normality of quality characteristic to be monitored. Simulation studies are made, and an example is discussed to evaluate the performance of the proposed charts. The comparison of the proposed chart is made with exponentially weighted moving average- and cumulative sum-type charts for process dispersion. The study shows that performance of the proposed charts are uniformly better than its competitors for detecting positive shifts while for detecting negative shift in the variance their performance is better for small shifts and reasonably good for moderated shifts.     

Monitoring simple linear profiles using variable sample size schemes

ABSTRACT

Profile monitoring is one of the new research areas in statistical process control. Most of the control charts in this area are designed with fixed sampling rate which makes the control chart slow in detecting small to moderate shifts. In order to improve the performance of the conventional fixed control charts, adaptive features are proposed in which, one or more design parameters vary during the process. In this paper the variable sample size feature of EWMA₃ and MEWMA schemes are proposed for monitoring simple linear profiles. The EWMA₃ method is based on the combination of three exponentially weighted moving average (EWMA) charts for monitoring three parameters of a simple linear profile separately and the Multivariate EWMA (MEWMA) chart is based on the using a single chart to monitor the coefficients and variance of a general linear profile. Also a two-sided control chart is proposed for monitoring the standard deviation in the EWMA₃ method. The performance of the proposed charts is compared in terms of the average time to signal. Numerical examples show that using adaptive features increase the power of control charts in detecting the parameter shifts. Finally, the performance of the proposed variable sample size schemes is illustrated through a real case in the leather industry.     

A robust R control chart based on a two-step estimator of the process dispersion

ABSTRACT

Control charts are the frequently used tools for monitoring and controlling the processes. Classical control charts are sensitive to existing contaminated data which may be presented in the data collected from the processes. Thus, these charts are not able to control the processes precisely when the data are contaminated. Robust control charts are those which are less sensitive to contamination. Some robust control charts for monitoring the process variability were proposed in the past which are robust to some sorts of contamination. In this paper a new robust R control chart is proposed which is less sensitive to wide range of contaminations, i.e. general and local contaminations. Simulation studies are performed to compare the performance of the proposed control chart with some classical and robust control charts, using ARL and MSD as criteria for comparisons purposes. The simulation results show a very good performance of the proposed chart when both types of contaminations exist.     

ARL-unbiased control charts for the monitoring of exponentially distributed characteristics based on type-II censored samples

In this paper, the problem of monitoring process data that can be modelled by exponential distribution is considered when observations are from type-II censoring. Such data are common in many practical inspection environment. An average run length unbiased (ARL-unbiased) control scheme is developed when the in-control scale parameter is known. The performance of the proposed control charts are investigated in terms of the ARL and standard deviation of the run length. The effects of parameter estimation on the proposed control charts are also evaluated. Then, we consider the design of the ARL-unbiased control charts when the in-control scale parameter is estimated. Finally, an example is used to illustrate the implementation of the proposed control charts.     

Comparison of different control charts for a Weibull process with type-I censoring

Some control charts have been proposed to monitor the mean of a Weibull process with type-I censoring. One type of control charts is to monitor changes in the scale parameter because it indicates changes in the mean. With this approach, we compare different control charts such as Shewhart-type and exponentially weighted moving average (EWMA) charts based on conditional expected value (CEV) and cumulative sum (CUSUM) chart based on likelihood-ratio. A simulation approach is employed to compute control limits and average run lengths. The results show that the CUSUM chart has the best performance. However, the EWMA-CEV chart is recommendable for practitioners with its competitive performance and ease of use advantage. An illustrative example is also provided.     

Improving the performance of the zone control chart

A general model for the zone control chart is presented. Using this model, it is shown that there are score vectors for zone control charts which result in superior average run length performance in comparison to Shewhart charts with common runs rules.

A fast initial response (FIR) feature for the zone control chart is also proposed. Average run lengths of the zone control chart with this feature are calculated. It is shown that the FIR feature improves zone control chart performance by providing significantly earlier signals when the process is out of control.     

Multivariate Quality Control Chart for Autocorrelated Processes

Traditional multivariate statistical process control (SPC) techniques are based on the assumption that the successive observation vectors are independent. In recent years, due to automation of measurement and data collection systems, a process can be sampled at higher rates, which ultimately leads to autocorrelation. Consequently, when the autocorrelation is present in the data, it can have a serious impact on the performance of classical control charts. This paper considers the problem of monitoring the mean vector of a process in which observations can be modelled as a first-order vector autoregressive VAR (1) process. We propose a control chart called Z-chart which is based on the single step finite intersection test (Timm, 1996). An important feature of the proposed method is that it not only detects an out of control status but also helps in identifying variable(s) responsible for the out of control situation. The proposed method is illustrated with the help of suitable illustrations.     

Zone control charts with estimated parameters for detecting prespecified changes in linear profiles

ABSTRACT

In profile monitoring, control charts are proposed to detect unanticipated changes, and it is usually assumed that the in-control parameters are known. However, due to the characteristics of a system or process, the prespecified changes would appear in the process. Moreover, in most applications, the in-control parameters are usually unknown. To overcome these issues, we develop the zone control charts with estimated parameters to detect small shifts of these prespecified changes. The effects of estimation error have been investigated on the performance of the proposed charts. To account for the practitioner-to-practitioner variability, the expected average run length (ARL) and the standard deviation of the average run length (SDARL) is used as the performance metrics. Our results show that the estimation error results in the significant variation in the ARL distribution. Furthermore, in order to adequately reduce the variability, more phase I samples are required in terms of the SDARL metric than that in terms of the expected ARL metric. In addition, more observations on each sampled profile are suggested to improve the charts' performance, especially for small phase I sample sizes. Finally, an illustrative example is given to show the performance of the proposed zone control charts.     

A new approach for monitoring process variance

ABSTRACT

Control charts are effective tools for signal detection in both manufacturing processes and service processes. Much service data come from a process with variables having non-normal or unknown distributions. The commonly used Shewhart variable control charts, which depend heavily on the normality assumption, should not be properly used in such circumstances. In this paper, we propose a new variance chart based on a simple statistic to monitor process variance shifts. We explore the sampling properties of the new monitoring statistic and calculate the average run lengths (ARLs) of the proposed variance chart. Furthermore, an arcsine transformed exponentially weighted moving average (EWMA) chart is proposed because the ARLs of this modified chart are more intuitive and reasonable than those of the variance chart. We compare the out-of-control variance detection performance of the proposed variance chart with that of the non-parametric Mood variance (NP-M) chart with runs rules, developed by Zombade and Ghute [Nonparametric control chart for variability using runs rules. Experiment. 2014;24(4):1683–1691], and the nonparametric likelihood ratio-based distribution-free exponential weighted moving average (NLE) chart and the combination of traditional exponential weighted moving average (EWMA) mean and EWMA variance (CEW) control chart proposed by Zou and Tsung [Likelihood ratio-based distribution-free EWMA control charts. J Qual Technol. 2010;42(2):174–196] by considering cases in which the critical quality characteristic has a normal, a double exponential or a uniform distribution. Comparison results showed that the proposed chart performs better than the NP-M with runs rules, and the NLE and CEW control charts. A numerical example of service times with a right-skewed distribution from a service system of a bank branch in Taiwan is used to illustrate the application of the proposed variance chart and of the arcsine transformed EWMA chart and to compare them with three existing variance (or standard deviation) charts. The proposed charts show better detection performance than those three existing variance charts in monitoring and detecting shifts in the process variance.     

Multivariate Control Chart Based on Multivariate Smirnov Test

Robust control charts are useful in statistical process control (SPC) when there is limited knowledge about the underlying process distribution, especially for multivariate observations. This article develops a new robust and self-starting multivariate procedure based on multivariate Smirnov test (MST), which integrates a multivariate two-sample goodness-of-fit (GOF) test based on multivariate empirical distribution function (MEDF) and the change-point model. As expected, simulation results show that our proposed control chart is robust to nonnormally distributed data, and moreover, it is efficient in detecting process shifts, especially large shifts, which is one of the main drawbacks of most robust control charts in the literature. As it avoids the need for a lengthy data-gathering step, the proposed chart is particularly useful in start-up or short-run situations. Comparison results and a real data example show that our proposed chart has great potential for application.     

A New Adaptive Variable Sample Size Approach in EWMA Control Chart

Adaptive control charts have been developed for improving the capability of control charts in detecting small shifts. In this article, we propose a new exponential weighted moving average control chart with variable sample size, in which the sample size is determined as an integer linear function by EWMA statistic value. The performance of the proposed VSS EWMA control chart is compared with FSS EWMA as well as traditional VSS EWMA control charts. The results show the better performance of the proposed VSS strategy respect to the traditional one and fixed sample size.     

A Class of Markov Chain Models for Average Run Length Computations for Autocorrelated Processes

The average run length (ARL) of conventional control charts is typically computed assuming temporal independence. However, this assumption is frequently violated in practical applications. Alternative ARL computations have often been conducted via time consuming and yet not necessarily very accurate simulations. In this article, we develop a class of Markov chain models for evaluating the run length performance of traditional control charts for autocorrelated processes. We show extensions from the univariate AR(1) model to the general multivariate VARMA(p, q) time series. The results of the proposed method are highly comparable to those of simulations and with significantly less computational overhead.     

Integration of classification algorithms and control chart techniques for monitoring multivariate processes

We propose new multivariate control charts that can effectively deal with massive amounts of complex data through their integration with classification algorithms. We call the proposed control chart the ‘Probability of Class (PoC) chart’ because the values of PoC, obtained from classification algorithms, are used as monitoring statistics. The control limits of PoC charts are established and adjusted by the bootstrap method. Experimental results with simulated and real data showed that PoC charts outperform Hotelling's T ² control charts. Further, a simulation study revealed that a small proportion of out-of-control observations are sufficient for PoC charts to achieve the desired performance.     

Change Point Estimation of Multivariate Linear Profiles Under Linear Drift

In this paper, maximum likelihood estimators (MLE) for both step and linear drift changes in the regression parameters of multivariate linear profiles are developed. Performance of the proposed estimators is compared under linear drift changes in the regression parameters when a combined MEWMA and Chi-square control charts method signals an out-of-control condition. The effect of smoothing parameter of MEWMA control charts, missing data, and multiple drift changes on the performance of the both estimators is also evaluated. The application of the proposed estimators is also investigated thorough a numerical example resulted from a real case.     

ARL-unbiased control charts with alarm and warning lines for monitoring Weibull percentiles using the first-order statistic

This article discusses methodology for constructing control charts to monitor the percentiles of a Weibull process with known shape parameter. Periodic samples are censored at the smallest observed value. Charts with alarm and warning limits are studied, and these limits are derived using theoretical results based on the first-order statistic. The performance of the proposed charts is evaluated and compared using average run lengths. A numerical application concerning life tests of an electronic product is presented to illustrate the methods.     

Weighted adaptive multivariate CUSUM charts with variable sampling intervals

The adaptive multivariate CUSUM (AMCUSUM) chart has received considerable attention because of its superior sensitivity against a range of mean shift sizes than that of the conventional non-adaptive multivariate CUSUM (MCUSUM) chart. Recently, weighted AMCUSUM (WAMCUSUM) charts with a fixed sampling interval (FSI) have been proposed, called the WAMCUSUM-FSI charts, which provide more sensitivity than the AMCUSUM-FSI charts. In this paper, we extend this work and propose WAMCUSUM charts with variable sampling interval (VSI), named the WAMCUSUM-VSI charts, for efficiently monitoring the mean of a multivariate normally distributed process. The Monte Carlo simulation method is used to compute the average time to signal (ATS) and the adjusted ATS (AATS) profiles of the existing and proposed charts. It is found that the WAMCUSUM-VSI charts perform substantially and nearly uniformly better than the WAMCUSUM-FSI charts in terms of the ATS and AATS performance criterion. An example is given to explain the implementation of the WAMCUSUM charts with fixed and VSIs.     

Improved CUSUM charts for monitoring process mean

In this paper, we propose new cumulative sum (CUSUM) and Shewhart-CUSUM (SCUSUM) control charts for monitoring the process mean using ranked-set sampling (RSS) and ordered RSS (ORSS) schemes. The proposed CUSUM charts include the Crosier's CUSUM (CCUSUM) and Shewhart-CCUSUM (SCCUSUM) charts using RSS, and the CUSUM, CCUSUM, SCUSUM and SCCUSUM charts using ORSS. Moreover, fast initial response features are also attached with these CUSUM charts to improve their sensitivities for an initial out-of-control situation. Monte Carlo simulations are used to compute the run length characteristics of the proposed CUSUM charts. Upon comparing the run length performances of the CUSUM charts, it turns out that the proposed CUSUM charts are more sensitive than their existing counterparts. A real dataset is used to explain the implementation of the proposed CUSUM charts.     

Transition probabilities and ARL performance of Six Sigma zone control charts

In this article, Six Sigma zone control charts (SSZCCs) are proposed for world class organizations. The transition probabilities are obtained using the Markov chain approach. The Average Run Length (ARL) values are then presented. The ARL performance of the proposed SSZCCs and the standard Six Sigma control chart (SSCC) without zones or run rules is studied. The ARL performance of these charts is then compared with those of the other standard zone control charts (ZCCs), the modified ZCC and the traditional Shewhart control chart (SCC) with common run rules. As expected, it is shown that the proposed SSZCC outperforms the standard SSCC without zones or run rules for process shifts of any magnitude. When compared to the other standard ZCCs and the Shewhart chart with common run rules, it is observed that the proposed SSZCCs have much higher false alarm rates for smaller shifts and hence they prevent unwanted process disturbances. The application of the proposed SSZCC is illustrated using a real time example.