Non-resumable scheduling on a single bounded parallel-batch machine with periodic maintenance

We consider the problem of scheduling a set of jobs with different processing times and sizes on a single bounded parallel-batch machine with periodic maintenance. Because the machine is in batch-processing model and the capacity is fixed, several jobs can be processed simultaneously in a batch provided that the total size of the jobs in the batch doesn’t exceed the machine capacity. And the processing time of a batch is the largest processing time of the jobs contained in the batch. Meanwhile, the production of each batch is non-resumable, that is, if a batch cannot be completed processing before some maintenance, that batch needs to be processed anew once the machine returns available. Our goal is to minimize the makespan. We first consider two special cases where the jobs have the same sizes or the same processing times, both of which are strongly NP-hard. We present two different approximation algorithms for them and show that these two algorithms have the same tight worst-case ratio of 2. We then consider the general case where the jobs have the arbitrary processing times and arbitrary sizes, for which we propose a 17/5-approximation algorithm.

     

A memetic differential evolution algorithm for energy-efficient parallel machine scheduling

This paper considers an energy-efficient bi-objective unrelated parallel machine scheduling problem to minimize both makespan and total energy consumption. The parallel machines are speed-scaling. To solve the problem, we propose a memetic differential evolution (MDE) algorithm. Since the problem involves assigning jobs to machines and selecting an appropriate processing speed level for each job, we characterize each individual by two vectors: a job-machine assignment vector and a speed vector. To accelerate the convergence of the algorithm, only the speed vector of each individual evolves and a list scheduling heuristic is applied to derive its job-machine assignment vector based on its speed vector. To further enhance the algorithm, we propose efficient speed adjusting and job-machine swap heuristics and integrate them into the algorithm as a local search approach by an adaptive meta-Lamarckian learning strategy. Computational results reveal that the incorporation of list scheduling heuristic and local search greatly strengthens the algorithm. Computational experiments also show that the proposed MDE algorithm outperforms SPEA-II and NSGA-II significantly.     

Single-machine scheduling with production and rejection costs to minimize the maximum earliness

In this paper, we consider the single-machine scheduling problem with production and rejection costs to minimize the maximum earliness. If a job is accepted, then this job must be processed on the machine and a corresponding production cost needs be paid. If the job is rejected, then a corresponding rejection cost has to be paid. The objective is to minimize the sum of the maximum earliness of the accepted jobs, the total production cost of the accepted jobs and the total rejection cost of the rejected jobs. We show that this problem is equivalent to a single-machine scheduling problem to minimize the maximum earliness with two distinct rejection modes. In the latter problem, rejection cost might be negative in the rejection-award mode which is different from the traditional rejection-penalty mode in the previous literatures. We show that both of two problems are NP-hard in the ordinary sense and then provide two pseudo-polynomial-time algorithms to solve them. Finally, we also show that three special cases can be solved in polynomial time.     

基于改进遗传算法的置换装配线调度问题研究

企业的置换装配线调度问题（Permutation Assembly-line Scheduling Problem,PASP）是一类典型的NP-hard型生产调度问题,是现代集成制造系统CIMS极为关心的问题。该问题可以具体描述为n个工件要在m台机器上加工,每个工件需要经过m道工序,每道工序要求不同的机器,这n个工件通过m台机器的顺序相同,它们在每台机器上的加工顺序也相同,问题的主要目标是找到n个工件在每台机器上的最优加工顺序,使得最大完工时间最小。由于PASP问题的NP-hard性质,本文使用遗传算法对其进行求解。尽管遗传算法常用以求解调度问题,但其选择与交叉机制易导致局部最优及收敛慢。因此,本文提出基于区块挖掘与重组的改进遗传算法用于求解置换装配线调度问题。首先通过关联规则挖掘出不同的优秀基因,然后将具有较优结果的基因组合为优势区块,产生具优势的人工解,并引入高收敛性的局部搜索方法,提高搜索到最优解的机会与收敛效率。本文以OR-Library中Taillard标准测试例来验证改进遗传算法的求解质量与效率,结果证明：本文所提算法与其它求解调度问题的现有5种知名算法相比,不仅收敛速度较快,同时求解质量优于它们。     

Scheduling two job families on a single machine with two competitive agents

We consider the scheduling problems arising when two agents, each with a family of jobs, compete to perform their respective jobs on a single machine. A setup time is needed for a job if it is the first job to be processed on the machine or its processing on the machine follows a job that belongs to another family. Each agent wants to minimize a certain cost function, which depends on the completion times of its jobs only. The aim is to find a schedule for all the jobs of the two agents that minimizes the objective of one agent while keeping the objective of the other agent being bounded by a fixed value \(Q\). Polynomial-time and pseudo-polynomial-time algorithms are designed to solve the problem involving various combinations of regular scheduling objective functions.     

A Multi-Exchange Neighborhood for Minimum Makespan Parallel Machine Scheduling Problems

We propose new local search algorithms for minimum makespan parallel machine scheduling problems, which perform multiple exchanges of jobs among machines. Inspired by the work of Thompson and Orlin (1989) on cyclic transfer neighborhood structures, we model multiple exchanges of jobs as special disjoint cycles and paths in a suitably defined improvement graph, by extending definitions and properties introduced in the context of vehicle routing problems (Thompson and Psaraftis, 1993) and of the capacitated minimum spanning tree problem (Ahuja et al., 2001). Several algorithms for searching the neighborhood are suggested.We report the results of a wide computational experimentation, on different families of benchmark instances, performed for the case of identical machines. This problem has been selected as a case study to perform a comparison among the alternative algorithms, and to discover families of instances for which the proposed neighborhood may be promising in practice. Based on the results of the experiments, we can suggest which among the many possible variants of the proposed approaches may be more promising for developing local search algorithms based on multi-exchange moves for related problems. Also, on some families of instances, which are very hard to solve exactly, the most promising multi-exchange algorithms were observed to dominate, in solution quality and in computational time, competitive benchmark heuristics.     

A bicriteria approach to scheduling a single machine with job rejection and positional penalties

Single machine scheduling problems have been extensively studied in the literature under the assumption that all jobs have to be processed. However, in many practical cases, one may wish to reject the processing of some jobs in the shop, which results in a rejection cost. A solution for a scheduling problem with rejection is given by partitioning the jobs into a set of accepted and a set of rejected jobs, and by scheduling the set of accepted jobs among the machines. The quality of a solution is measured by two criteria: a scheduling criterion, F1, which is dependent on the completion times of the accepted jobs, and the total rejection cost, F2. Problems of scheduling with rejection have been previously studied, but usually within a narrow framework—focusing on one scheduling criterion at a time. This paper provides a robust unified bicriteria analysis of a large set of single machine problems sharing a common property, namely, all problems can be represented by or reduced to a scheduling problem with a scheduling criterion which includes positional penalties. Among these problems are the minimization of the makespan, the sum of completion times, the sum and variation of completion times, and the total earliness plus tardiness costs where the due dates are assignable. Four different problem variations for dealing with the two criteria are studied. The variation of minimizing F1+F2 is shown to be solvable in polynomial time, while all other three variations are shown to be $\mathcal{NP}$ -hard. For those hard problems we provide a pseudo polynomial time algorithm. An FPTAS for obtaining an approximate efficient schedule is provided as well. In addition, we present some interesting special cases which are solvable in polynomial time.     

考虑分时电价的多目标批调度问题蚁群算法求解

对同时优化电力成本和制造跨度的多目标批处理机调度问题进行了研究,设计了两种多目标蚁群算法,基于工件序的多目标蚁群算法(J-PACO,Job-based Pareto Ant Colony Optimization)和基于成批的多目标蚁群算法(B-PACO,Batch-based Pareto Ant Colony Optimization)对问题进行求解分析。由于分时电价中电价是时间的函数,因而在传统批调度进行批排序的基础上,需要进一步确定批加工时间点以测定电力成本。提出的两种蚁群算法分别将工件和批与时间线相结合进行调度对此类问题进行求解。通过仿真实验将两种算法对问题的求解进行了比较,仿真实验表明B-PACO算法通过结合FFLPT(First Fit Longest Processing Time)启发式算法先将工件成批再生成最终方案,提高了算法搜索效率,并且在衡量算法搜索非支配解数量的Q指标和衡量非支配集与Pareto边界接近程度的HV指标上,均优于J-PACO算法。     

On single machine scheduling with resource constraint

The single machine scheduling with resource constraint is a nonlinear combinatorial optimization problem in cloud computing applications. Given a set of jobs and certain resource, the problem is to find a permutation of jobs and a distribution of resource to optimize certain objective function. The processing time of each job is a nonlinear function with respect to the resource assigned to it. In this paper, we propose a naive algorithm and study a subproblem in the algorithm that suppose the permutation of jobs is also given, how to find a resource distribution to minimize the total weighted flow time. We found a polynomial-time optimal solution for a special case and an approximation solution in general case.     

Scheduling a single semi-continuous batching machine

This paper addresses a new problem, called semi-continuous batch scheduling, which arises in the heating-operation of tube-billets in the steel industry. Each heating furnace can be regarded as a semi-continuous batching machine, which can handle up to C jobs simultaneously. The jobs in the same batch enter and leave the machine semi-continuously, which differs from the traditional batching machine scheduling where the jobs in same batch have a starting time and a finishing time. In this paper the processing time of a batch depends on the capacity of the semi-continuous batching machine, the longest processing time of jobs in the batch and its size. The objectives are to schedule jobs on the machine so that the makespan and the total completion time are minimized. A schedule for a semi-continuous batching machine consists of a batching and sequencing for the batches. We propose the optimal properties of two different objective functions and present the different dynamic programming algorithms with a running time of O(n²), respectively.     

A HEURISTIC ALGORITHM FOR THE FLOWSHOP PROBLEM WITH A COMMON JOB SEQUENCE ON ALL MACHINES*

This paper presents a scheduling algorithm to solve flowshop problems with a common job sequence on all machines. This algorithm uses makespan as its criterion. Initially, it chooses a preferred sequence by scanning the processing times matrix and making a few calculations. The makespan time of the preferred job-sequence is further reduced by using an improvement routine that allows interchanges between adjacent jobs. Solutions of 1200 problems are compared with the best solutions previously reported for corresponding size problems in the Campbell-Dudek-Smith (C-D-S) paper [1]. This algorithm offers up to 1% average improvement in reducing the makespan of nearly 50% of the problem sets over the results of the existing algorithms, and its computational time requirements are about one-fifth of that of the C-D-S algorithm.     

Semi-online scheduling on two identical machines with rejection

In this paper we consider two semi-online scheduling problems with rejection on two identical machines. A sequence of independent jobs are given and each job is characterized by its size (processing time) and its penalty, in the sense that, jobs arrive one by one and can be either rejected by paying a certain penalty or assigned to some machine. No preemption is allowed. The objective is to minimize the sum of the makespan of schedule, which is yielded by all accepted jobs and the total penalties of all rejected ones. In the first problem one can reassign several scheduled jobs in rejection tache, in the second a buffer with length k is available in rejection tache. Two optimal algorithms both with competitive ratio $\frac{3}{2}$ are presented.     

Exact algorithms for scheduling programs with shared tasks

We study a scheduling problem where the jobs we have to perform are composed of one or more tasks. If two jobs sharing a non-empty subset of tasks are scheduled on the same machine, then these shared tasks have to be performed only once. This kind of problem is known in the literature under the names of VM-PACKING or PAGINATION. Our objective is to schedule a set of these objects on two parallel identical machines, with the aim of minimizing the makespan. This problem is NP-complete as an extension of the PARTITION problem. In this paper we present three exact algorithms with worst-case time-complexity guarantees, by exploring different branching techniques. Our first algorithm focuses on the relation between jobs sharing one or more symbols in common, whereas the two other algorithms branches on the shared symbols.

     

Competitive analysis of online machine rental and online parallel machine scheduling problems with workload fence

In this paper, we introduce the concept of “workload fence" into online machine rental and machine scheduling problems. With the knowledge of workload fence, online algorithms acquire the information of a finite number of first released jobs in advance. The concept originates from the frozen time fence in the domain of master scheduling in materials management. The total processing time of the jobs foreseen, corresponding to a finite number of jobs, is called workload fence, which is irrelevant to the job sequence. The remaining jobs in the sequence, however, can only become known on their arrival. This work aims to reveal whether the knowledge of workload fence helps to boost the competitive performance of deterministic online algorithms. For the online machine rental problem, we prove that the competitiveness of online algorithms can be improved with a sufficiently large workload fence. We further propose a best online algorithm for the corresponding scenario. For online parallel machine scheduling with workload fence, we give a positive answer to the above question for the case where the workload fence is equal to the length of the longest job. We also show that the competitiveness of online algorithms may not be improved even with a workload fence strictly larger than the largest length of a job. The results help one manager to make a better decision regarding the tradeoff between the performance improvement of online algorithms and the cost caused to acquire the knowledge of workload fence.

     

Optimal semi-online algorithm for scheduling with rejection on two uniform machines

In this paper we consider a semi-online scheduling problem with rejection on two uniform machines with speed 1 and s≥1, respectively. A sequence of independent jobs are given and each job is characterized by its size (processing time) and its penalty, in the sense that, jobs arrive one by one and can be either rejected by paying a certain penalty or assigned to some machine. No preemption is allowed. The objective is to minimize the sum of the makespan of schedule, which is yielded by all accepted jobs and the total penalties of all rejected ones. Further, two rejection strategies are permitted thus an algorithm can propose two different schemes, from which the better solution is chosen. For the above version, we present an optimal semi-online algorithm H that achieves a competitive ratio ρ _H (s) as a piecewise function in terms of the speed ratio s.     

New Methods for Resolving Conflicting Requests with Examples from Medical Residency Scheduling

In scheduling medical residents, the objective is often to maximize resident satisfaction across the space of feasible schedules, relative to the many hard constraints that ensure appropriate patient coverage, adequate training opportunities, etc. A common metric of resident satisfaction is the number of time‐off requests that are granted. Simply maximizing this total, however, may lead to undesirable schedules since some requests have higher priority than others. For example, it might be better to grant one resident's request for a family member's wedding in place of two residents’ requests to attend a rugby game. Another approach is to assign a weight to each request and maximize the total weight of granted requests, but determining weights that accurately represent residents’ and schedulers’ preferences can be quite challenging. Instead, we propose to identify the exhaustive collection of maximally feasible and minimally infeasible sets of requests which can then be used by schedulers to select their preferred solution. Specifically, we have developed two algorithms, which we call Sequential Request Selection Via Cuts (Sequential RSVC) and Simultaneous Request Selection Via Cuts (Simultaneous RSVC), to identify these sets by solving two sequences of optimization problems. We present these algorithms along with computational results based on a real‐world problem of scheduling residents at the University of Michigan C.S. Mott Pediatric Emergency Department. Although we focus our exposition on the problem of resident scheduling, our approach is applicable to a broad class of problems with soft constraints.     

混合离散差分进化算法在单机批处理调度中的应用

本文研究单机批处理调度问题,批处理机有批次容量限制,批处理时间由每个批次所含作业中的最长作业处理时间决定。每个作业具有不同的大小、处理时间、提前拖期惩罚权重,所有作业具有公共交货期,且交货期无限晚。目标函数为最小化所有作业的加权提前拖期惩罚之和。该问题已被证明为NP难题,本研究找到了其最优解具有的一些性质,在此基础上利用它们提出了一种动态规划(DP)与差分进化(DE)算法相结合的混合离散差分进化(HDDE)算法来求解该问题,通过与传统的遗传算法、模拟退火算法和迭代贪婪算法进行对比,HDDE算法显示了更加强大的全局搜索能力。     

Two-agent scheduling problems on a single-machine to minimize the total weighted late work

In this paper, two-agent scheduling problems are presented. The different agents share a common processing resource, and each agent wants to minimize a cost function depending on its jobs only. The objective functions we consider are the total weighted late work and the maximum cost. The problem is to find a schedule that minimizes the objective function of agent A, while keeping the objective function of agent B cannot exceed a given bound U. Some different scenarios are presented by depending on the objective function of each agent. We address the complexity of those problems, and present the optimal polynomial time algorithms or pseudo-polynomial time algorithm to solve the scheduling problems, respectively.     

New results on two-machine flow-shop scheduling with rejection

In this paper, we consider the off-line and on-line two-machine flow-shop scheduling problems with rejection. The objective is to minimize the sum of the makespan of accepted jobs and the total rejection penalty of rejected jobs. For the off-line version, Shabtay and Gasper (Comput Oper Res 39:1087–1096, 2012) showed that this problem is NP-hard and then provided a pseudo-polynomial-time algorithm, two 2-approximation algorithms and a fully polynomial-time approximation scheme. We further study some special cases in this paper. We show that this problem is still NP-hard even when all jobs have the same processing time on one of the machines or all jobs have the same rejection penalty. Furthermore, we also showed that this problem can be solved in polynomialtime algorithm when all jobs satisfy the agreeable condition on their processing times and rejection penalties. For the on-line version without rejection, Chen and Woeginger [in: Du DZ, Pardalos PM (eds.) Minimax and Applications, 1995] showed that the competitive ratio of any determined on-line algorithm is at least 2. We further show that the competitive ratio of any determined on-line algorithm is at least 2 even when all jobs have the same processing time on the first machine. Finally, for the on-line version with rejection, we present a class of on-line algorithms with the best-possible competitive ratio 2.     

Discrete parallel machine makespan ScheLoc problem

Scheduling–Location (ScheLoc) problems integrate the separate fields of scheduling and location problems. In ScheLoc problems the objective is to find locations for the machines and a schedule for each machine subject to some production and location constraints such that some scheduling objective is minimized. In this paper we consider the discrete parallel machine makespan ScheLoc problem where the set of possible machine locations is discrete and a set of n jobs has to be taken to the machines and processed such that the makespan is minimized. Since the separate location and scheduling problem are both \(\mathcal {NP}\)-hard, so is the corresponding ScheLoc problem. Therefore, we propose an integer programming formulation and different versions of clustering heuristics, where jobs are split into clusters and each cluster is assigned to one of the possible machine locations. Since the IP formulation can only be solved for small scale instances we propose several lower bounds to measure the quality of the clustering heuristics. Extensive computational tests show the efficiency of the heuristics.