Designs balanced for circular residual effects

Magda (1980) introduced a model for repeated measurements designs with a circular structure of the residual effects. He proved the universal optimality of circular balanced uniform designs over a subclass of the possible designs. We strengthen his result to optimality over the set of all designs with the same number of experimental units, periods and treatments.     

Efficient crossover designs in the presence of interactions between direct and carry-over treatment effects

Crossover designs, or repeated measurements designs, are used for experiments in which t treatments are applied to each of n experimental units successively over p time periods. Such experiments are widely used in areas such as clinical trials, experimental psychology and agricultural field trials. In addition to the direct effect on the response of the treatment in the period of application, there is also the possible presence of a residual, or carry-over, effect of a treatment from one or more previous periods. We use a model in which the residual effect from a treatment depends upon the treatment applied in the succeeding period; that is, a model which includes interactions between the treatment direct and residual effects. We assume that residual effects do not persist further than one succeeding period.A particular class of strongly balanced repeated measurements designs with n=t² units and which are uniform on the periods is examined. A lower bound for the A-efficiency of the designs for estimating the direct effects is derived and it is shown that such designs are highly efficient for any number of periods p=2,…,2t.     

TABLES OF SMALL OPTIMAL REPEATED MEASUREMENTS DESIGNS

This paper presents tables of the optimal repeated measurements designs for the estimation of direct effects and of residual effects for a model with independent errors, for up to n = 10 experimental units, for t= 2 treatments and p= 2, 3 or 4 periods, and for t= 3 treatments and p= 2 or 3 periods.     

A Class of Experimental Designs Balanced for First Residuals

In this paper a new class of designs involving sequences of treatments balanced for first residual effects has been introduced. These designs require only t experimental units for 2t periods, t being the number of treatments to be tested. A unified method of constructing these designs for all values of t (≥2) along with an appropriate method of analysis is presented. Besides, their efficiency relative to some well known designs is investigated.     

Designs with Repeated Measurements on Any Number of Units over Varying Periods

In the usual repeated measurements designs (RMDs), the subjects are all observed for the same number of periods and the optimum RMDs require specified numbers of subjects, usually depending on the number of treatments to be used. In practice, it is sometimes not feasible to meet these requirements. To overcome this problem, alternative designs are suggested where any number of available subjects may be used and they may be observed for different periods. These designs are based on suitable serially balanced sequences which are shown to be optimal. Moreover, besides the usual direct and residual effects, the model considered has an extra term due to the interaction effect between them. The recommended designs are universally optimal in a very general class.     

Repeated measurements designs with unequal period sizes

Summary This paper is concerned with the designs in which each experimental unit is assigned more than once to a treatment, either different or identical. An easy method of constructing balanced minimal repeated measurements designs with unequal period sizes is presented whenever the number of periods is less than the number of treatments. Strongly balanced minimal repeated measurements designs with unequal period sizes are also constructed whenever the number of periods is less than the number of treatments.     

Construction of circular partially balanced-Repeated measurement designs using cyclic shifts

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. These designs balance out the residual effects. The situations where balanced repeated measurements designs require a large number of the subjects, partially-balanced repeated measurements designs should be used. In this paper some infinite series are developed which provide circular partially-balanced repeated measurement designs for p (periods) even. Catalogues of circular partially-balanced repeated measurement designs are also presented for v (treatments) ≤ 100 with p = 5, 7 & 9.     

Minimal circular balanced repeated measurement designs in unequal period sizes

Abstract

Repeated measurement designs (RMDs) are widely used in medicine, pharmacology, animal sciences and psychology. In these fields, there are several situations where these designs should be used in periods of different sizes. With the use of RMD, residual effects or carry over effects may arise and balanced RMDs are solution to this problem. In this article, therefore, some infinite series are developed through method of cyclic shifts to obtain circular balanced repeated measurements designs in periods of two different sizes.     

Constructions of Residual Treatment Effects Designs for Comparing Test Treatments with a Control

This article deals with residual treatment effects designs for the purpose of comparing v test treatments with a control treatment when the number of periods is no larger than v + 1. Control balanced residual treatment effects designs, which are Schur-optimal, are considered. Some methods of their construction are given.     

Construction of repeated measurements designs strongly balanced for residual effects

Abstract

Repeated Measurements Designs have been widely used in agriculture, animal husbandry, education, biology, botany and engineering. Balanced or strongly balanced repeated measurements designs are useful to balance out the residual effects. In this article, some new generators and construction procedures are proposed to obtain circular strongly balanced repeated measurements designs in periods of (a) equal sizes, (b) two different sizes, and (c) three different sizes.     

A review of uniform cross-over designs

Uniform cross-over designs form an important family of experimental designs. They have been applied in many scientific disciplines including clinical trials, agricultural studies and psychological experiments. In this paper we consider the four types of uniform cross-over design, as given by Williams [1949. Experimental designs balanced for the estimation of residual effects of treatments. Aust. J. Sci. Res. 2, 149–168], Cheng and Wu [1980. Balanced repeated measurements designs. Ann. Statist. 8, 1272–1283. Corrigendum 11 (1983) 349], Bate and Jones [2006. The construction of nearly balanced and nearly strongly balanced uniform cross-over designs. J. Statist. Plann. Inference 136, 3248–3267] and Kunert [1983. Optimal design and refinement of the linear model with applications to repeated measurements designs. Ann. Statist. 11, 247–257]. The efficiency of these designs, existence criteria and methods of construction are described.     

Some new construction of circular weakly balanced repeated measurements designs in periods of two different sizes

Abstract

Balanced repeated measurements designs (RMDs) balance out the residual effects. Williams Latin square designs work as minimal combinatorial balanced as well as variance balanced for RMDs for p (period sizes) = v (number of treatments). If minimal balanced RMDs cannot be constructed for the situations where p must be less than v then weakly balanced RMDs should be preferred. In this article, some generators are developed to generate circular weakly balanced RMDs in periods of two different sizes. To obtain the proposed designs, some construction procedures are also described for some of the cases where we could not develop generators.     

A construction of repeated measurements designs with balance for residual effects

Families of Repeated Measurements Designs balanced for residual effects are constructed (whenever the divisibility conditions allow), under the assumption that the number of periods is less than the number of treatments and that each treatment precedes each other treatment once. These designs are then shown to be connected for both residual and direct treatment effects.     

Optimal Circular Block Designs for Neighbouring Competition Effects

Competition or interference occurs when the responses to treatments in experimental units are affected by the treatments in neighbouring units. This may contribute to variability in experimental results and lead to substantial losses in efficiency. The study of a competing situation needs designs in which the competing units appear in a predetermined pattern. This paper deals with optimality aspects of circular block designs for studying the competition among treatments applied to neighbouring experimental units. The model considered is a four-way classified model consisting of direct effect of the treatment applied to a particular plot, the effect of those treatments applied to the immediate left and right neighbouring units and the block effect. Conditions have been obtained for the block design to be universally optimal for estimating direct and neighbour effects. Some classes of balanced and strongly balanced complete block designs have been identified to be universally optimal for the estimation of direct, left and right neighbour effects and a list of universally optimal designs for v<20 and r<100 has been prepared.     

Randomization of neighbour balanced generalized Youden designs

If a crossover design with more than two treatments is carryover balanced, then the usual randomization of experimental units and periods would destroy the neighbour structure of the design. As an alternative, Bailey [1985. Restricted randomization for neighbour-balanced designs. Statist. Decisions Suppl. 2, 237–248] considered randomization of experimental units and of treatment labels, which leaves the neighbour structure intact. She has shown that, if there are no carryover effects, this randomization validates the row–column model, provided the starting design is a generalized Latin square. We extend this result to generalized Youden designs where either the number of experimental units is a multiple of the number of treatments or the number of periods is equal to the number of treatments. For the situation when there are carryover effects we show for so-called totally balanced designs that the variance of the estimates of treatment differences does not change in the presence of carryover effects, while the estimated variance of this estimate becomes conservative.     

Some New Residual Treatment Effects Designs for Comparing Test Treatments with a Control

Pigeon & Raghavarao (1987) introduced control balanced residual treatment effects designs for the situation where one treatment is a control or standard and is to be compared with the v test treatments, and they have also given methods of construction of control balanced residual treatment effects designs and have investigated their efficiencies. In this paper we have developed some new families of control balanced residual treatment effects designs, which are Schur-optimal.     

Optimal block designs with non additive mixed effects interference

This paper deals with optimality aspects of block designs balanced for interference effects from neighboring units on both sides under a general non additive model along with random block effects. Here, a class of complete, circular block designs strongly balanced for interference effects has been shown to be universally optimal for the estimation of direct effects and interference effects (left and right) of treatments under a non additive mixed effects model.     

Change-over designs with complete balance for first and second residual effects

This paper presents a unified method of constructing change-over designs that permit the estimation of direct effects orthogonal to all other effects when the residual effects of treatments last for two consecutive periods. Explicit methods of analysis of these designs have been obtained for the situations where the first period observations are omitted from the analysis and where the first period observations are included.     

AN ALGORITHM FOR THE CONSTRUCTION OF OPTIMAL OR NEAR-OPTIMAL CHANGE-OVER DESIGNS

This paper presents an algorithm for the construction of optimal or near optimal change-over designs for arbitrary numbers of treatments, periods and units. Previous research on optimality has been either theoretical or has resulted in limited tabulations of small optimal designs. The algorithm consists of a number of steps:first find an optimal direct treatment effects design, ignoring residual effects, and then optimise this class of designs with respect to residual effects. Poor designs are avoided by judicious application of the (M, S)-optimality criterion, and modifications of it, to appropriate matrices. The performance of the algorithm is illustrated by examples.     

Circular balanced repeated measurement designs in periods of three different sizes

Abstract

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. If there is a restriction on the total number of treatments, some experimental units can receive on the total length of time while some experimental units can remain in the trial, then repeated measurements designs with unequal period sizes should be used. In this article, some infinite series are developed to generate the minimal balanced repeated measurement designs in periods of three different sizes p₁, p₂ and p₃, where 2?≤?p₃?<?p₂ ≤ 10 and p₂?<?p₁.