Equineighboured balanced nested row-column designs

This paper presents equineighboured balanced nested row-column designs for v treatments arranged in b blocks each comprising pq units further grouped into p rows and q columns. These are two-dimensional designs with the property that all pairs of treatments are neighbours equally frequently at all levels in both rows and columns. Methods of construction are given both for designs based on Latin squares and those where pq≤v. Cyclic equineighboured designs are defined and tabulated for 5≤v≤10, p≤3, q≤5, where r=bpq/v is the number of replications of each treatment.     

Comparisons of search designs using search probabilities

Search designs are considered for searching and estimating one nonzero interaction from the two and three factor interactions under the search linear model. We compare three 12-run search designs D1, D2, and D3, and three 11-run search designs D4, D5, and D6, for a 2⁴ factorial experiment. Designs D2 and D3 are orthogonal arrays of strength 2, D1 and D4 are balanced arrays of full strength, D5 is a balanced array of strength 2, and D6 is obtained from D3 by deleting the duplicate run. Designs D4 and D5 are also obtained by deleting a run from D1 and D2, respectively. Balanced arrays and orthogonal arrays are commonly used factorial designs in scientific experiments. “Search probabilities” are calculated for the comparison of search designs. Three criteria based on search probabilities are presented to determine the design which is most likely to identify the nonzero interaction. The calculation of these search probabilities depends on an unknown parameter ρ which has a signal-to-noise ratio form. For a given value of ρ, Criteria I and II are newly proposed in this paper and Criteria III is given in Shirakura et al. (Ann. Statist. 24 (6) (1996) 2560). We generalize Criteria I–III for all values of ρ so that the comparison of search designs can be made without requiring a specific value of ρ. We have developed simplified methods for comparing designs under these three criteria for all values of ρ. We demonstrate, under all three criteria, that the balanced array D1 is more likely to identify the nonzero interaction than the orthogonal arrays D2 and D3, and the design D4 is more likely to identify the nonzero interaction than the designs D5 and D6.The methods of comparing designs developed in this paper are applicable to other factorial experiments for searching one nonzero interaction of any order.     

Non-binary neighbor balance circular designs for v=2n and λ=2

Neighbor balance designs were first introduced by Rees (1967) in circular blocks for the use in serological research. Subsequently several researchers have defined the neighbor designs in different ways. In this paper, neighbor balance circular designs for (k≤v) block size are constructed for even number of treatments i.e. v=2n. No such series of designs is known in literature. Two theorems are developed for circular designs. Theorem 1 gives the non-binary circular blocks, whereas Theorem 2 generates binary circular blocks when n≤4 and non-binary blocks for n>4. In suggested designs no treatment is ever a neighbor of itself. Blocks are constructed in such a way that each treatment is a right and left neighbor of every other treatment for a fixed number of times say λ. Sizes of initial circular blocks are not same. One main guiding principle for such designs is to ensure economy in material use.     

Tabu search for covering arrays using permutation vectors

A covering array  CA(N;t,k,v)$\mathsf{CA}(N;t,k,v)$ is an N×k$N\times k$ array, in which in every N×t$N\times t$ subarray, each of the v^t$v^t$ possible t  -tuples over v$v$ symbols occurs at least once. The parameter t is the strength   of the array. Covering arrays have a wide range of applications for experimental screening designs, particularly for software interaction testing. A compact representation of certain covering arrays employs “permutation vectors” to encode v^t×1$v^t\times 1$ subarrays of the covering array so that a covering perfect hash family whose entries correspond to permutation vectors yields a covering array. We introduce a method for effective search for covering arrays of this type using tabu search. Using this technique, improved covering arrays of strength 3, 4 and 5 have been found, as well as the first arrays of strength 6 and 7 found by computational search.     

Comparing more than one treatment to more than one control in incomplete blocks

The class of balanced treatment incomplete block designs is generalized to allow for comparison of v₁ test treatments and v₂ control treatments. The generalized class is equivalent to the class of balanced bipartite block designs considered by Jaggi, Gupta, and Parsad. Some results on design construction and A-optimality are given for small values of v₁ and v₂. Algorithms are developed for computing simultaneous confidence bounds for all test treatment versus control contrasts.     

Computer-Generated Neighbor Designs

Neighbor designs are useful to remove the neighbor effects. In this article, an algorithm is developed and is coded in Visual C + +to generate the initial block for possible first, second,…, and all order neighbor designs. To get the required design, a block (0, 1, 2,…, k ? 1) is then augmented with (v ? 1) blocks obtained by developing the initial block cyclically mod (v ? 1).     

Weighted A-optimality for fractional 2m factorial designs of resolution V

A weighted A-optimality (WA-optimality) criterion is discussed for selecting a fractional 2^m factorial design of resolution V. A WA-optimality criterion having one weight may be considered for designs. It is shown that designs derived from orthogonal arrays are WA-optimal for any weight. From a WA-optimal design, a procedure for finding WA-optimal designs for various weights is given. WA-optimal balanced designs are presented for 4 ⩽ m ⩽ 7 and for the values of n assemblies in certain ranges. It is pointed out that designs for m = 7 and for n = 41, 42 given in Chopra and Srivastava (1973a) or in the corrected paper by Chopra et al. (1986), are not A-optimal.     

Non binary partially neighbor balanced designs for circular blocks

ABSTRACT

Neighbor designs are recommended for the cases where the performance of treatment is affected by the neighboring treatments as in biometrics and agriculture. In this paper we have constructed two new series of non binary partially neighbor balanced designs for v = 2n and v = 2n+1 number of treatments, respectively. The blocks in the design are non binary and circular but no treatment is ever a neighbor to itself. The designs proposed here are partially balanced in terms of nearest neighbors. No such series are known in the literature.     

Weakly resolvable IV.3 search designs for the pn factorial experiment

A series of weakly resolvable search designs for the pⁿ factorial experiment is given for which the mean and all main effects are estimable in the presence of any number of two-factor interactions and for which any combination of three or fewer pairs of factors that interact may be detected. The designs have N = p(p–1)n+p runs except in one case where additional runs are required for detection and one case where $\text{(p?1)}\text{2}$ additional runs are needed to estimate all (p–1)² degrees of freedom for each pair of detected interactions. The detection procedure is simple enough that computations can be carried out with hand calculations.     

Generalized Bhaskar Rao designs

Generalized Bhaskar Rao designs with non-zero elements from an abelian group G are constructed. In particular this paper shows that the necessary conditions are sufficient for the existence of generalized Bhaskar Rao designs with k=3 for the following groups: ?G? is odd, G=Z^r₂, and G=Z^r₂×H where 3? ?H? and r?1. It also constructs generalized Bhaskar Rao designs with υ=k, which is equivalent to υ rows of a generalized Hadamard matrix of order n where υ?n.     

D-optimal block designs with at most six varieties

For given positive integers v, b, and k (all of them ≥2) a block design is a k × b array of the variety labels 1,…,v with blocks as columns. For the usual one-way heterogeneity model in standard form the problem is studied of finding a D-optimal block design for estimating the variety contrasts, when no balanced block design (BBD) exists. The paper presents solutions to this problem for v≤6. The results on D-optimality are derived from a graph-theoretic context. Block designs can be considered as multigraphs, and a block design is D-optimal iff its multigraph has greatest complexity (=number of spanning trees).     

Some important classes of generalized neighbor designs for linear blocks

In this paper, some infinite series of generalized neighbor designs are constructed for the linear blocks which are useful to balance out the neighbor effects for the cases where (a) one of the v treatments has some neighbor effects with other treatments, while remaining (v – 1) treatments have half of that neighbor effect among selves, (b) some of the v treatments have some neighbor effect with other treatments, while remaining treatments have half of that neighbor effect among themselves, (c) one of the v treatments has some neighbor effect with other treatments, while remaining (v – 1) treatments have double of that effect among themselves, and (d) some of the v treatments have some neighbor effect with other, while remaining treatments have double of it among themselves.     

Balanced and partially balanced incomplete block designs with autocorrelation errors

The paper aims to find variance balanced and variance partially balanced incomplete block designs when observations within blocks are autocorrelated and we call them BIBAC and PBIBAC designs. Orthogonal arrays of type I and type II when used as BIBAC designs have smaller average variance of elementary contrasts of treatment effects compared to the corresponding Balanced Incomplete Block (BIB) designs with homoscedastic, uncorrelated errors. The relative efficiency of BIB designs compared to BIBAC designs depends on the block size k and the autocorrelation ρ and is independent of the number of treatments. Further this relative efficiency increases with increasing k. Partially balanced incomplete block designs with autocorrelated errors are introduced using partially balanced incomplete block designs and orthogonal arrays of type I and type II.     

On some joint distributions in fluctuation theory

For non-negative integral valued interchangeable random variables v₁, v₂,…,v_n, Takács (1967, 70) has derived the distributions of the statistics ?_n' ?¹_n' ?^(c)_n and ?^(-c)_n concerning the partial sums N_r = v₁ + v₂ + ··· + v_rr = 1,…,n. This paper deals with the joint distributions of some other statistics viz., (α^(c)_n, δ^(c)_n, Z_n), (β^(c)_n, Z_n) and (β^(-c)_n, Z_n) concerning the partial sums N_r = ε₁ + ··· + ε_rr = 1,2,…,n, of geometric random variables ε₁, ε₂,…,ε_n.     

Bounds for permutation arrays

A permutation array (P.A.) defined on an r-set of symbols V is a v×r array of rows each of which is a permutation of the symbols of V and such that any two distinct rows have at most (at least) λ common column entries. We list all known bounds for such arrays and make improvements in certain cases. We consider, at length, the case when every pair of distinct rows of the P.A. have precisely λ common column entries.     

Some d-optimal weighing designs for n≡ (mod 4)

A number of D-optimal weighing designs are constructed with the help of block matrices. The D-optimal designs (n,k,s)=(19,13,10), (19,14,7), (19,14,8), (19,15,7), (19,15,8), (19,17,6), (19,18,6), (23,16,8), (23,17,8), (23,18,8), (4n?1,2n+3,(3n+4)/2), (4n?1,2n+4,n+3), (4n?1,2n+4,n+2) where n≡0 mod 4 and a skew H_n exists, (31,24,8), (31,25,8) and many others are constructed. A computer routine leading to locally D-optimal designs is presented.     

Some determinant optimality aspects of main effect fold-over designs

Saha and Mohanty (1970) presented a main effect fold-over design consisting of 14 treatment combinations of the 24×33 factorial, which had the nice property of being even balanced. Calling this design DSM, this paper establishes the following specific results: (i) DSM is not d-optimal in the subclass Δe of all 14 point even balanced main effect fold-over designs of the 24×33 factorial; (ii) DSM is not d-optimal in the subclass $\text{Δ}{}^1\text{?Δ}{}^{\mathrm{e}}$ of all 14 point even and odd balanced main effect fold-over designs of the 24×33 factorial; (iii) DSM is even optimal in $\text{Δ}{}^1$ and Δe. In addition to these results two 14 point designs in $\text{Δ}{}^1$ are presented which are d-optimal and via a counter example it is shown that these designs are not odd optimal. Finally, several general matrix algebra results are given which should be useful in resolving d-optimality problems of fold-over designs of the kn11×kn22 factorial.     

Orthogonal sets of balanced incomplete block designs with nested rows and column

Known series of balanced incomplete block designs with nested rows and columns are used to find orthogonal sets of these designs, producing main effects plans in nested rows and columns. Two infinite series are so constructed and shown to be universally optimum for the analysis with recovery of row and column information, a benefit produced by the additional higher strata orthogonality they enjoy. One of these series achieves orthogonality with just v − 1 replicates of v treatments, fewer than required by Latin squares.     

Optimal regular graph designs

A typical problem in optimal design theory is finding an experimental design that is optimal with respect to some criteria in a class of designs. The most popular criteria include the A- and D-criteria. Regular graph designs occur in many optimality results, and if the number of blocks is large enough, an A-optimal (or D-optimal) design is among them (if any exist). To explore the landscape of designs with a large number of blocks, we introduce extensions of regular graph designs. These are constructed by adding the blocks of a balanced incomplete block design repeatedly to the original design. We present the results of an exact computer search for the best regular graph designs and the best extended regular graph designs with up to 20 treatments v, block size \(k \le 10\) and replication r \(\le 10\) and \(r(k-1)-(v-1)\lfloor r(k-1)/(v-1)\rfloor \le 9\).     

Complete designs with blocks of maximal multiplicity

The set of distinct blocks of a block design is known as its support. We construct complete designs with parameters v(?7), k=3, λ=v ? 2 which contain a block of maximal multiplicity and with support size $\text{b}{}^1\text{= (}{}^{\mathrm{v}}{}_3\text{) ? 4(v ? 2)}$. Any complete design which contains such a block, and has parameters v, k, λ as above, must be supported on at most (^v₃) ? 4(v ? 2) blocks. Attention is given to complete designs because of their direct relationship to simple random sampling.