Economic statistical design of a multivariate control chart under a Burr XII shock model with multiple assignable causes

Control charts show the distinction between the random and assignable causes of variation in a process. The real process may be affected by many characteristics and several assignable causes. Therefore, the economic statistical design of multiple control chart under Burr XII shock model with multiple assignable causes can be an appropriate candidate model. In this paper, we develop a cost model based on the optimization of the average cost per unit of time. Indeed, the cost model under the influence of a single match case assignable cause and multiple assignable causes under a same cost and time parameters were compared. Besides, a sensitivity analysis was also presented in which the changeability of loss-cost and design parameters were evaluated based on the changes in cost, time and Burr XII distribution parameters.     

An extension of Banerjee and Rahim model in economic and economic statistical designs for multivariate quality characteristics under Burr XII distribution

The design parameters of the economic and economic statistical designs of control charts depend on the distribution of process failure mechanism or shock model. So far, only a small number of failure distributions, such as exponential, gamma, and Weibull with fixed or increasing hazard rates, have been used as a shock model in the economic and economic statistical designs of the Hotelling T² control charts. Due to both theoretical and practical aspects, the lifetime of the process under study may not follow a distribution with fixed or increasing hazard rate. A proper alternative for this situation may be the Burr distribution, in which the hazard rate can be fixed, increasing, decreasing, single mode, or even U-shaped. In this research article, economic and economic statistical designs of the Hotelling T² control charts under the Burr XII shock models under two uniform and non uniform sampling schemes were proposed, constructed, and compared. The obtained design models were implemented by a numerical example, and a sensitivity analysis was conducted to evaluate the effect of changing parameters of shock model distribution on the optimum values of the proposed design models. The results showed that first the proposed designs under non uniform sampling scheme perform better and second the optimum values of the designs are not significantly sensitive to changing of the Burr XII distribution parameters. We showed that the obtained design models are also true for the beta Burr XII shock model.     

Optimization of design parameters for control charts with multiple assignable causes

Duncan's economic model of Shewhart's original x¯ chart has established its optimal and economic application for processes with the Markovian failure characteristic. As the sample statistics show some indications of process variations, the variable-sampling-interval (VSI) control charts perform more effectively than the fixed sampling interval (FSI) ones due to a higher frequency in the sampling rate. Regarding the economic design of control charts, most studies have been dedicated to the FSI scheme. In 1998, Bai & Lee considered the production process with a single assignable cause and proposed an economic VSI design for a general x¯ control chart. However, in real cases, there are multiple assignable causes in the production process. Therefore, concerning the operation characteristics of the real industry, this research develops an economic model for the VSI control chart with multiple assignable causes based on stochastic and statistics theory and determines the optimal design parameters of the chart. A numerical example is also provided to demonstrate the effectiveness of the proposed model and the result indicates that VSI performs more effectively than a FSI control chart.     

Economic design of VSI X̄ control chart with correlated non-normal data under multiple assignable causes

It has been recently revealed that the Shewhart control charts with variable sampling interval (VSI) perform better than the traditional Shewhart chart with the fixed sampling interval in detecting shifts in the process. In most of these research works, the normality and independency of the process data or measurements are assumed and that the process is subjected to only one assignable cause. While, in practice, these assumptions usually do not hold, some recent studies are focused on working with only one or two of these violations. In this paper, the situation in which the process data are correlated and follow a non-normal distribution and that there is multiplicity of assignable causes in the process is considered. For this case, a cost model for the economic design of the VSI X? control chart is developed, where the Burr distribution is employed to represent the non-normal distribution of the process data. To obtain the optimal values of the design parameters, a genetic algorithm is employed in which the response surface methodology is applied. A numerical example is presented to show the applicability and effectiveness of the proposed methodology. Sensitivity analysis is also carried out to evaluate the effects of cost and input parameters on the performance of the chart.     

A modified economic-statistical design of the T2 control chart with variable sample sizes and control limits

Recent studies have shown that using variable sampling size and control limits (VSSC) schemes result in charts with more statistical power than variable sampling size (VSS) when detecting small to moderate shifts in the process mean vector. This paper presents an economic-statistical design (ESD) of the VSSC T² control chart using the general model of Lorenzen and Vance [22]. The genetic algorithm approach is then employed to search for the optimal values of the six test parameters of the chart. We then compare the expected cost per unit of time of the optimally designed VSSC chart with optimally designed VSS and FRS (fixed ratio sampling) T² charts as well as MEWMA charts.     

Economic design of non parametric sign control chart

An economic design of sign chart to control the median is proposed. Since the sign chart is distribution free, it can easily be applied to any process without prior knowledge of process quality distribution. The effect on loss cost observed for different shifts in location shows that the sign chart performs better for large shifts. The economic statistical performance study reveals that statistical performance of sign chart can be improved sufficiently for moderate shifts in the process. Sensitivity study shows that design is more sensitive for change in values of penalty loss cost and time required for search and repair of an assignable cause.     

Economic design of &Xmacron; charts with variable parameters: the Markov chain approach

This paper presents an economic design of &Xmacron; control charts with variable sample sizes, variable sampling intervals, and variable control limits. The sample size n, the sampling interval h, and the control limit coefficient k vary between minimum and maximum values, tightening or relaxing the control. The control is relaxed when an &Xmacron; value falls close to the target and is tightened when an &Xmacron; value falls far from the target. A cost model is constructed that involves the cost of false alarms, the cost of finding and eliminating the assignable cause, the cost associated with production in an out-of-control state, and the cost of sampling and testing. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A comprehensive study is performed to examine the economic advantages of varying the &Xmacron; chart parameters.     

The effect of Phase I sample size on the run length performance of control charts for autocorrelated data

Traditional control charts assume independence of observations obtained from the monitored process. However, if the observations are autocorrelated, these charts often do not perform as intended by the design requirements. Recently, several control charts have been proposed to deal with autocorrelated observations. The residual chart, modified Shewhart chart, EWMAST chart, and ARMA chart are such charts widely used for monitoring the occurrence of assignable causes in a process when the process exhibits inherent autocorrelation. Besides autocorrelation, one other issue is the unknown values of true process parameters to be used in the control chart design, which are often estimated from a reference sample of in-control observations. Performances of the above-mentioned control charts for autocorrelated processes are significantly affected by the sample size used in a Phase I study to estimate the control chart parameters. In this study, we investigate the effect of Phase I sample size on the run length performance of these four charts for monitoring the changes in the mean of an autocorrelated process, namely an AR(1) process. A discussion of the practical implications of the results and suggestions on the sample size requirements for effective process monitoring are provided.     

A weibull process failure mechanism for the economic design of mewma control charts

The design parameters of the multivariate exponentially weighted moving average (MEWMA) control chart may be chosen according to economic and/or statistical considerations. The economic model proposed for the design of the'MEWMA chart assumes a Markovian process failure mechanism following an exponential distribution. We'assess the sensitivity of the resulting economic design for the MEWMA to deviations from this assumption. In particular, the generalization, from an exponential to a Weibull distribution of process failure, is used to study the selection of MEWMA chart parameters given process cost and time information. We conclude that the quality of the resulting design (in terms of expected cost) is not substantially affected by mis-specification of the distribution of process failure.     

A control chart for monitoring process variation using multiple dependent state sampling

A control chart for monitoring process variation by using multiple dependent state (MDS) sampling is constructed in the present article. The operational formulas for in-control and out-of-control average run lengths (ARLs) are derived. Control constants are established by considering the target in-control ARL at a normal process. The extensive ARL tables are reported for various parameters and shifted values of process parameters. The performance of the proposed control chart has been evaluated with several existing charts in regard of ARLs, which empowered the presented chart and proved far better for timely detection of assignable causes. The application of the proposed concept is illustrated with a real-life industrial example and a simulation-based study to elaborate strength of the proposed chart over the existing concepts.     

A mixed control chart for monitoring failure times under accelerated hybrid censoring

In an accelerated hybrid censoring scheme several stress factors can be accelerated to make the products to respond to fail more quickly than under normal operating conditions. In such situations, the control charts available in the literature cover the attribute characteristics only to monitor the performance of the process over time. This study extends the idea by proposing an optimal mixed attribute-variable control chart for Weibull distribution under an accelerated hybrid censoring scheme keeping the advantages of both attribute and variable control charts. It first monitors the number of defectives under accelerated conditions and switches to the variable control chart to investigate the mean failure times when the process stability is dubious. The performance of the proposed chart is evaluated by using run-length characteristics, and the optimality of the design parameter is achieved by minimizing the out-of-control average run length. The simulation study depicted better performance of the proposed control chart than the traditional charts in detecting shifts in the process. A real-life application is also included.KEYWORDS: Mixed control chart, attribute chart, variable chart, Weibull distribution, accelerated hybrid censoring     

Economic and economic statistical design of T 2 control chart with two adaptive sample sizes

The Hotelling's T ² control chart, a direct analogue of the univariate Shewhart X¯ chart, is perhaps the most commonly used tool in industry for simultaneous monitoring of several quality characteristics. Recent studies have shown that using variable sampling size (VSS) schemes results in charts with more statistical power when detecting small to moderate shifts in the process mean vector. In this paper, we build a cost model of a VSS T ² control chart for the economic and economic statistical design using the general model of Lorenzen and Vance [The economic design of control charts: A unified approach, Technometrics 28 (1986), pp. 3–11]. We optimize this model using a genetic algorithm approach. We also study the effects of the costs and operating parameters on the VSS T ² parameters, and show, through an example, the advantage of economic design over statistical design for VSS T ² charts, and measure the economic advantage of VSS sampling versus fixed sample size sampling.     

Shewhart control charts for the scale parameter of a Weibull control variable with fixed and variable sampling intervals

In this paper, we are concerned with pure statistical Shewhart control charts for the scale parameter of the three-parameter Weibull control variable, where, and are the location, the scale and the shape parameters, respectively, with fixed (FSI) and variable (VSI) sampling intervals. The parameters and are assumed to be known. We consider two-sided, and lower and upper one-sided Shewhart control charts and their FSI and VSI versions . They jointly control the mean and the variance of the Weibull control variable X. The pivotal statistic of those control charts is the maximum-likelihood estimator of for the Nth random sample XN=(X1N,X2N,...,XnN) of the Weibull control variable X. The design and performance of these control charts are studied. Two criteria, i.e. 'comparability criterion' (or 'matched criterion') under control and 'primordial criterion', are imposed on their design. The performance of these control charts is measured using the function average time to signal. For the VSI versions, the constant which defines the partition of the 'continuation region' is obtained through the 'comparability criterion' under control. The monotonic behaviour of the function average time to signal in terms of the parameters (magnitude of the shift suff ered by the target value 0), and is studied. We show that the function average time to signal of all the control charts studied in this paper does not depend on the value of the parameter or on 0, and, under control, does not depend on the parameter, when Delta (the probability of a false alarm) and n (sample size) are fixed. All control charts satisfy the 'primordial criterion' and, for fixed, on average, they all (except the two-sided VSI, for which we were not able to ascertain proof) are quicker in detecting the shift as increases. We conjecture - and we are not contradicted by the numerical example considered - that the same is true for the two-sided VSI control chart. We prove that, under the average time to signal criterion, the VSI versions are always preferable to their FSI versions. In the case of one-sided control charts, under the 'comparability criterion', the VSI version is always preferable to the FSI version, and this advantage increases with and the extent of the shift. Our one-sided control charts perform better and have more powerful statistical properties than does our two-sided control chart. The numerical example where n=5,0=1,=0.5, 1.0, 2.0, and Delta=1/370.4 is presented for the two-sided, and the lower and upper one-sided control charts. These numerical results are presented in tables and in figures. The joint influence of the parameters and in the function average time to signal is illustrated.     

Economic-statistical design of X ¥ charts for non-normal data by considering quality loss

When the X ¥ control chart is used to monitor a process, three parameters should be determined: the sample size, the sampling interval between successive samples, and the control limits of the chart. Duncan presented a cost model to determine the three parameters for an X ¥ chart. Alexander et al. combined Duncan's cost model with the Taguchi loss function to present a loss model for determining the three parameters. In this paper, the Burr distribution is employed to conduct the economic-statistical design of X ¥ charts for non-normal data. Alexander's loss model is used as the objective function, and the cumulative function of the Burr distribution is applied to derive the statistical constraints of the design. An example is presented to illustrate the solution procedure. From the results of the sensitivity analyses, we find that small values of the skewness coefficient have no significant effect on the optimal design; however, a larger value of skewness coefficient leads to a slightly larger sample size and sampling interval, as well as wider control limits. Meanwhile, an increase on the kurtosis coefficient results in an increase on the sample size and wider control limits.     

Control chart for monitoring the Weibull shape parameter under two competing risks

ABSTRACT

In this paper, we propose a control chart to monitor the Weibull shape parameter where the observations are censored due to competing risks. We assume that the failure occurs due to two competing risks that are independent and follow Weibull distribution with different shape and scale parameters. The control charts are proposed to monitor one or both of the shape parameters of competing risk distributions and established based on the conditional expected values. The proposed control chart for both shape parameters is used in certain situations and allows to monitor both shape parameters in only one chart. The control limits depend on the sample size, number of failures due to each risk and the desired stable average run length (ARL). We also consider the estimation problem of the target parameters when the Phase I sample is incomplete. We assumed that some of the products that fail during the life testing have a cause of failure that is only known to belong to a certain subset of all possible failures. This case is known as masking. In the presence of masking, the expectation-maximization (EM) algorithm is proposed to estimate the parameters. For both cases, with and without masking, the behaviour of ARLs of charts is studied through the numerical methods. The influence of masking on the performance of proposed charts is also studied through a simulation study. An example illustrates the applicability of the proposed charts.     

Identifying the time of a step change with multivariate single control charts

Change point estimation procedures simplify the efforts to search for and identify special causes in multivariate statistical process monitoring. After a signal is generated by the simultaneously used control charts or a single control chart, add-on change point procedure estimates the time of the change. In this study, multivariate joint change point estimation performance for simultaneous monitoring of both location and dispersion is compared under the assumption that various single charts are used to monitor the process. The change detection performance for several structural changes for the mean vector and covariance matrix is also discussed. It is concluded that choice of the control chart to obtain a signal may affect the change point detection performance.     

An Extension of Economic Design of x-Bar Control Charts for Non Normally Distributed Data Under Weibull Shock Models

Three parameters—sample size, sampling intervals, and the control limits—must be determined when the x bar chart to monitor a manufacturing process. The constant sampling intervals were widely employed because of its administrative simplicity. However, the variable sampling interval (VSI) has recently been shown to give substantially faster detection of most process shifts than fixed-sampling-interval (FSI) for x-bar charts. In addition, these measurements in the subgroup are assumed to be normally distributed. That assumption may not be tenable. This investigation compares the economic design of x-bar control charts for non normal data under Weibull shock models with various sampling avenues.