A new sampling method for estimating the population mean

A double L ranked set sampling (DLRSS) method is suggested for estimating the population mean. The DLRSS is compared with the simple random sampling (SRS), ranked set sampling (RSS) and L ranked set sampling (LRSS) methods based on the same number of measured units. The conditions for which the suggested estimator performs better than the other estimators are derived. It is found that, the suggested DLRSS estimator is an unbiased of the population mean, and is more efficient than its counterparts using SRS, RSS, and LRSS methods. Real data sets are used for illustration.     

On the Kaplan–Meier estimator based on ranked set samples

When quantification of all sampling units is expensive but a set of units can be ranked, without formal measurement, ranked set sampling (RSS) is a cost-efficient alternate to simple random sampling (SRS). In this paper, we study the Kaplan–Meier estimator of survival probability based on RSS under random censoring time setup, and propose nonparametric estimators of the population mean. We present a simulation study to compare the performance of the suggested estimators. It turns out that RSS design can yield a substantial improvement in efficiency over the SRS design. Additionally, we apply the proposed methods to a real data set from an environmental study.     

Estimation of mean based on modified robust extreme ranked set sampling

In this paper, double robust extreme ranked set sampling (DRERSS) and its properties for estimating the population mean are considered. It turns out that, when the underlying distribution is symmetric, DRERSS gives unbiased estimators of the population mean. Also, it is found that DRERSS is more efficient than the simple random sampling (SRS), ranked set sampling (RSS), and extreme ranked set sampling (ERSS) methods. For asymmetric distributions considered in this study, the DRERSS has a small bias and it is more efficient than SRS, RSS, and ERSS. A real data set is used to illustrate the DRERSS method.     

Efficiency of ranked set sampling in entropy estimation and goodness-of-fit testing for the inverse Gaussian law

When measuring units are expensive or time consuming, while ranking them is relatively easy and inexpensive, it is known that ranked set sampling (RSS) is preferable to simple random sampling (SRS). Many authors have suggested several extensions of RSS. As a variation, Al-Saleh and Al-Kadiri [Double ranked set sampling, Statist. Probab. Lett. 48 (2000), pp. 205–212] introduced double ranked set sampling (DRSS) and it was extended by Al-Saleh and Al-Omari [Multistage ranked set sampling, J. Statist. Plann. Inference 102 (2002), pp. 273–286] to multistage ranked set sampling (MSRSS). The entropy of a random variable (r.v.) is a measure of its uncertainty. It is a measure of the amount of information required on the average to determine the value of a (discrete) r.v.. In this work, we discuss entropy estimation in RSS design and aforementioned extensions and compare the results with those in SRS design in terms of bias and root mean square error (RMSE). Motivated by the above observed efficiency, we continue to investigate entropy-based goodness-of-fit test for the inverse Gaussian distribution using RSS. Critical values for some sample sizes determined by means of Monte Carlo simulations are presented for each design. A Monte Carlo power analysis is performed under various alternative hypotheses in order to compare the proposed testing procedure with the existing methods. The results indicate that tests based on RSS and its extensions are superior alternatives to the entropy test based on SRS.     

New two-stage sampling designs based on neoteric ranked set sampling

Neoteric ranked set sampling (NRSS) is a recently developed sampling plan, derived from the well-known ranked set sampling (RSS) scheme. It has already been proved that NRSS provides more efficient estimators for population mean and variance compared to RSS and other sampling designs based on ranked sets. In this work, we propose and evaluate the performance of some two-stage sampling designs based on NRSS. Five different sampling schemes are proposed. Through an extensive Monte Carlo simulation study, we verified that all proposed sampling designs outperform RSS, NRSS, and the original double RSS design, producing estimators for the population mean with a lower mean square error. Furthermore, as with NRSS, two-stage NRSS estimators present some bias for asymmetric distributions. We complement the study with a discussion on the relative performance of the proposed estimators. Moreover, an additional simulation based on data of the diameter and height of pine trees is presented.     

Two-stage cluster sampling with hybrid ranked set sampling in the secondary sampling frame

In surveys of natural resources in agriculture, ecology, fisheries, forestry, environmental management, etc., cost-effective sampling methods are of major concern. In this paper, we propose a two-stage cluster sampling (TSCS) in integration with the hybrid ranked set sampling (HRSS)—named TSCS-HRSS—in the second stage of sampling for estimating the population mean. The TSCS-HRSS scheme encompasses several existing ranked set sampling (RSS) schemes and may help in selecting a smaller number of units to rank. It is shown both theoretically and numerically that the TSCS-HRSS provides an unbiased estimator of the population mean and it is more precise than the mean estimators based on TSCS with SRS and RSS schemes. An unbiased estimator of the variance of the proposed mean estimator is also derived. A similar trend is observed when studying the impact of imperfect rankings on the performance of the TSCS-HRSS based mean estimator.     

Efficiency bounds for a generalization of ranked-set sampling

Abstract

Partially rank-ordered set sampling (PROSS) is a generalization of ranked-set sampling (RSS) in which the ranker is not required to give a full ranking in each set. In this paper, we compare the efficiency of the sample mean as an estimator of the population mean under PROSS, RSS, and simple random sampling (SRS). We find that for fixed set size and total sample size, the efficiency of PROSS falls between that of SRS and that of RSS. We also develop a method for finding a sharp upper bound on the efficiency of PROSS relative to SRS for a particular design.     

Estimation of the population mean and median using truncation-based ranked set samples

In this paper, a new sampling method is suggested, namely truncation-based ranked set samples (TBRSS) for estimating the population mean and median. The suggested method is compared with the simple random sampling (SRS), ranked set sampling (RSS), extreme ranked set sampling (ERSS) and median-ranked set sampling (MRSS) methods. It is shown that for estimating the population mean when the underlying distribution is symmetric, TBRSS estimator is unbiased and it is more efficient than the SRS estimator based on the same number of measured units. For asymmetric distributions considered in this study, TBRSS estimator is more efficient than the SRS for all considered distributions except for exponential distribution when the selection coefficient gets large. When compared with ERSS and MRSS methods, TBRSS performs well with respect to ERSS for all considered distributions except for U(0, 1) distribution, while TBRSS efficiency is higher than that of MRSS for U(0, 1) distribution. For estimating the population median, the TBRSS estimators have higher efficiencies when compared with SRS and ERSS. A real data set is used to illustrate the suggested method.     

Estimation of bivariate characteristics using ranked set sampling

The superiority of ranked set sampling (RSS) over simple random sampling (SRS) for estimating the mean of a population is well known. This paper introduces and investigates a bivariate version of RSS for estimating the means of two characteristics simultaneously. It turns out that this technique is always superior to SRS and the usual univariate RSS of the same size. The performance of this procedure for a specific distribution can be evaluated using simulation or numerical computation. For the bivariate normal distribution, the efficiency of the procedure with respect to that of SRS is evaluated exactly for set size m = 2 and 3. The paper shows that the proposed estimator is more efficient than the regression RSS estimators proposed by Yu & Lam (1997) and Chen (2001). Real data that consist of heights and diameters of 399 trees are used to illustrate the procedure. The procedure can be generalized to the case of multiple characteristics.     

Mixed ranked set sampling design

The main focus of agricultural, ecological and environmental studies is to develop well designed, cost-effective and efficient sampling designs. Ranked set sampling (RSS) is one method that leads to accomplish such objectives by incorporating expert knowledge to its advantage. In this paper, we propose an efficient sampling scheme, named mixed RSS (MxRSS), for estimation of the population mean and median. The MxRSS scheme is a suitable mixture of both simple random sampling (SRS) and RSS schemes. The MxRSS scheme provides an unbiased estimator of the population mean, and its variance is always less than the variance of sample mean based on SRS. For both symmetric and asymmetric populations, the mean and median estimators based on SRS, partial RSS (PRSS) and MxRSS schemes are compared. It turns out that the mean and median estimates under MxRSS scheme are more precise than those based on SRS scheme. Moreover, when estimating the mean of symmetric and some asymmetric populations, the mean estimates under MxRSS scheme are found to be more efficient than the mean estimates with PRSS scheme. An application to real data is also provided to illustrate the implementation of the proposed sampling scheme.     

On extropy properties of ranked set sampling

Ranked set sampling is a sampling design that allows the experimenter to span the full range values in the population and it can be used widely in industrial, environmental and ecological studies. In this paper, we consider the information content of ranked set sampling in terms of extropy measure. It is shown that the ranked set sampling performs better than its simple random sample counterpart of the same size. Monotone properties and stochastic orders are investigated. Sharp bounds on the extropy of RSS data based on the projection method in the non-parametric set-up as well as Steffensen inequalities in the parametric context are established. The extropy measure can also be used as a discrimination tool between RSS and SRS data.     

Robust extreme ranked set sampling

In this paper, a robust extreme ranked set sampling (RERSS) procedure for estimating the population mean is introduced. It is shown that the proposed method gives an unbiased estimator with smaller variance, provided the underlying distribution is symmetric. However, for asymmetric distributions a weighted mean is given, where the optimal weights are computed by using Shannon's entropy. The performance of the population mean estimator is discussed along with its properties. Monte Carlo simulations are used to demonstrate the performance of the RERSS estimator relative to the simple random sample (SRS), ranked set sampling (RSS) and extreme ranked set sampling (ERSS) estimators. The results indicate that the proposed estimator is more efficient than the estimators based on the traditional sampling methods.     

Efficient estimators with categorical ranked set samples: estimation procedures for osteoporosis

Ranked set sampling (RSS) design as a cost-effective sampling is a powerful tool in situations where measuring the variable of interest is costly and time-consuming; however, ranking information about sampling units can be obtained easily through inexpensive and easy to measure characteristics at little or no cost. In this paper, we study RSS data for analysis of an ordinal population. First, we compare the problem of non-representative extreme samples under RSS and commonly-used simple random sampling. Using RSS data with tie information, we propose non-parametric and maximum likelihood estimators for population parameters. Through extensive numerical studies, we investigate the effect of various factors including ranking ability, tie generating mechanisms, the number of categories and population setting on the performance of the estimators. Finally, we apply the proposed methods to the bone disorder data to estimate the proportions of patients with osteopenia and osteoporosis status.     

Estimation of the distribution function under hybrid ranked set sampling

Recently, a hybrid ranked set sampling (HRSS) scheme has been proposed in the literature. The HRSS scheme encompasses several existing ranked set sampling (RSS) schemes, and it is a cost-effective alternative to the classical RSS and double RSS schemes. In this paper, we propose an improved estimator for estimating the cumulative distribution function (CDF) using HRSS. It is shown, both theoretically and numerically, that the CDF estimator under HRSS scheme is unbiased and its variance is always less than the variance of the CDF estimator with simple random sampling (SRS). An unbiased estimator of the variance of CDF estimator using HRSS is also derived. Using Monte Carlo simulations, we also study the performances of the proposed and existing CDF estimators under both perfect and imperfect rankings. It turns out that the proposed CDF estimator is by far a superior alternative to the existing CDF estimators with SRS, RSS and L-RSS schemes. For a practical application, a real data set is considered on the bilirubin level of babies in neonatal intensive care.     

More powerful permutation test based on multistage ranked set sampling

Many researches have used ranked set sampling (RSS) method instead of simple random sampling (SRS) to improve power of some nonparametric tests. In this study, the two-sample permutation test within multistage ranked set sampling (MSRSS) is proposed and investigated. The power of this test is compared with the SRS permutation test for some symmetric and asymmetric distributions through Monte Carlo simulations. It has been found that this test is more powerful than the SRS permutation test; its power increased by set size and/or number of cycles and/or number of stages. Symmetric distributions power increased better than asymmetric distributions power.     

Quality Control Chart for the Mean using Double Ranked Set Sampling

In this paper, an attempt is made to develop Quality Control Charts for monitoring the process mean based on Double Ranked Set Sampling (DRSS) rather than the traditional Simple Random Sampling (SRS). Considering a normal population and several shift values, the performance of the Average Run Length (ARL) of these new charts was compared with the control charts based on Ranked Set Sampling (RSS) and SRS with the same number of observations. It is shown that the new charts do a better job of detecting changes in process mean compared with SRS and RSS.     

Effect of measurement error on exponentially weighted moving average control charts under ranked set sampling schemes

Control charts are a powerful statistical process monitoring tool often used to monitor the stability of manufacturing processes. In quality control applications, measurement errors adversely affect the performance of control charts. In this paper, we study the effect of measurement error on the detection abilities of the exponentially weighted moving average (EWMA) control charts for monitoring process mean based on ranked set sampling (RSS), median RSS (MRSS), imperfect RSS (IRSS) and imperfect MRSS (IMRSS) schemes. We also study the effect of multiple measurements and non-constant error variance on the performances of the EWMA control charts. The EWMA control chart based on simple random sampling is compared with the EWMA control charts based on RSS, MRSS, IRSS and IMRSS schemes. The performances of the EWMA control charts are evaluated in terms of out-of-control average run length and standard deviation of run lengths. It turns out that the EWMA control charts based on MRSS and IMRSS schemes are better than their counterparts for all measurement error cases considered here.     

New cumulative sum control charts for monitoring process variability

In this article, we propose new cumulative sum (CUSUM) control charts using the ordered ranked set sampling (RSS) and ordered double RSS schemes, with the perfect and imperfect rankings, for monitoring the variability of a normally distributed process. The run length characteristics of the proposed CUSUM charts are computed using the Monte Carlo simulations. The proposed CUSUM charts are compared in terms of the average and standard deviation of run lengths with their existing competitor CUSUM charts based on simple random sampling. It turns out that the proposed CUSUM charts with the perfect and imperfect rankings are more sensitive than the existing CUSUM charts based on the sample range and standard deviation. A similar trend is present when these CUSUM charts are compared with the fast initial response features. An example is also used to demonstrate the implementation and working of the proposed CUSUM charts.     

Selected Ranked Set Sampling

This paper proposes a sampling procedure called selected ranked set sampling (SRSS), in which only selected observations from a ranked set sample (RSS) are measured. This paper describes the optimal linear estimation of location and scale parameters based on SRSS, and for some distributions it presents the required tables for optimal selections. For these distributions, the optimal SRSS estimators are compared with the other popular simple random sample (SRS) and RSS estimators. In every situation the estimators based on SRSS are found advantageous at least in some respect, compared to those obtained from SRS or RSS. The SRSS method with errors in ranking is also described. The relative precision of the estimator of the population mean is investigated for different degrees of correlations between the actual and erroneous ranking. The paper reports the minimum value of the correlation coefficient between the actual and the erroneous ranking required for achieving better precision with respect to the usual SRS estimator and with respect to the RSS estimator.     

Paired double-ranked set sampling

Abstract

In environmental monitoring and assessment, the main focus is to achieve observational economy and to collect data with unbiased, efficient and cost-effective sampling methods. Ranked set sampling (RSS) is one traditional method that is mostly used for accomplishing observational economy. In this article, we propose an unbiased sampling scheme, named paired double RSS (PDRSS) for estimating the population mean. We study the performance of the mean estimators under PDRSS based on perfect and imperfect rankings. It is shown that, for perfect ranking, the variance of the mean estimator under PDRSS is always less than the variance of mean estimator based on simple random sampling, paired RSS and RSS. The mean estimators under RSS, median RSS, PDRSS, and double RSS are also compared with the regression estimator of population mean based on SRS. The procedure is also illustrated with a case study using a real data set.