Take‐Back Legislation: Consequences for Remanufacturing and Environment

In the last two decades, many countries have enacted product take‐back legislation that holds manufacturers responsible for the collection and environmentally sound treatment of end‐of‐use products. In an industry regulated by such legislation, we consider a manufacturer that also sells remanufactured products under its brand name. Using a stylized model, we consider three levels of legislation: no take‐back legislation, legislation with collection targets, and legislation with collection and reuse targets. We characterize the optimal solution for the manufacturer and analyze how various levels of legislation affect manufacturing, remanufacturing, and collection decisions. First, we explore whether legislation with only collection targets causes an increase in remanufacturing levels, which is argued to be an environmentally friendlier option for end‐of‐use treatment than other options such as recycling. While increased remanufacturing alone is usually perceived as a favorable environmental outcome, if one considers the overall environmental impact of new and remanufactured products, this might not be the case. To study this issue, we model the environmental impact of the product following a life cycle analysis–based approach. We characterize the conditions under which increased remanufacturing due to take‐back legislation causes an increase in total environmental impact. Finally, we model the impact of legislation on consumer surplus and manufacturer profits and identify when total welfare goes down because of legislation.     

Design of the Reverse Channel for Remanufacturing: Must Profit‐Maximization Harm the Environment?

A key attribute of a remanufacturing strategy is the division of labor in the reverse channel, especially whether remanufacturing is performed in‐house or outsourced. We investigate this decision for a retailer who accepts returns of a remanufacturable product. Our formulation considers the cost structures of the two strategies, uncertainty in the input quality of the collected/returned used products, consumer willingness‐to‐pay for remanufactured product, the extent to which the remanufactured product cannibalizes demand for a new product, and the power structure in the channel. For the profit‐maximizing retailer, the differentials in variable remanufacturing costs drive strategy choice, and higher fixed costs of in‐house remanufacturing favors outsourcing. The variable remanufacturing costs and the balance of power in the prospective outsourced reverse channel are the key drivers of environmental impact, as measured by the retailer's propensity to remanufacture. While profitability and environmental goals often conflict, they align under certain conditions. These include (a) the third party has less bargaining power; or (b) the fixed cost for in‐house remanufacturing is relatively high. All else equal, when remanufacturing is outsourced, the environment fares better if the third party has leadership power. We generalize to the cases when remanufacturing achieves a quality level less than “good‐as‐new" and when used items have non‐zero salvage value. Analysis of these extensions illuminates how relative power in the reverse channel drives the firms’ preferences, as well as the end customers’ consumption experience.     

Cost Allocation in Manufacturing–Remanufacturing Operations

For firms remanufacturing their products, the total life‐cycle costs and revenues from new and remanufactured products determine their profitability. In many firms, manufacturing/sales and remanufacturing/remarketing operations are carried out in different divisions. Each division is responsible for only part of the product's life cycle. Practices regarding transfer pricing across divisions vary significantly among companies, affecting the life‐cycle profit performance of the product. In this research, we identify characteristics of transfer prices that achieve the firm‐wide optimal solution. To this end, we consider a manufacturer who also undertakes remanufacturing operations and we focus on price (quantity) decisions. We determine that a cost allocation mechanism that allocates a portion of the initial production cost to each of the two stages of the product life cycle should be used. We also conclude that cost allocation should be implemented as a fixed cost allocation, where charges to the remanufacturing division should be determined independently of the actual quantity of units remanufactured.     

考虑法律约束的两周期电子产品回收再制造决策研究

研究电子产品制造商面临政府回收法律约束时的再制造决策问题。第一个周期开始时,制造商生产并决定新产品的价格。当产品的生命周期到达时,面对政府制定的回收法律约束,制造商回收市场中的旧产品用于再制造。第二个周期开始时,制造商同时决策新产品和再造品的价格。研究发现：根据逆向运营成本(即回收成本与再制造成本之和)与新产品生产成本的不同组合,制造商对应五个不同的回收再制造策略;当逆向运营成本低于一定阈值时,法律强制回收不会影响企业的利润;而高于该阈值时,法律强制回收会减少企业的利润,因为较高的逆向运营成本使得企业没有意愿回收旧产品。此外,研究收集了实际数据并进行了案例分析,结果表明研究模型具有较强的稳健性。     

Effects of Random Yield in Remanufacturing with Price‐Sensitive Supply and Demand

In this study, we investigate the effects of recovery yield rate on pricing decisions in reverse supply chains. Motivated by the automotive parts remanufacturing industry, we consider an end‐of‐life product from which a particular part can be recovered and remanufactured for reuse, and the remainder of the product can be recycled for material recovery. Both the supply of end‐of‐life products and demand for remanufactured parts are price‐sensitive. Yield of the recovery process is random and depends on the acquisition price offered for the end‐of‐life products. In this setting, we develop models to determine the optimal acquisition price for the end‐of‐life products and the selling price for remanufactured parts. We also analyze the effects of yield variation to the profitability of remanufacturing, benefits of delaying pricing decisions until after yield realization, and value of perfect yield rate information.     

Lot Sizing for Optimal Collection and Use of Remanufacturable Returns over a Finite Life‐Cycle

Reverse supply chains process used product returns to recover value by re‐processing them via remanufacturing operations. When remanufacturing is feasible, the longer the return flows are delayed during the active (primary) market demand period of the product, the lower the value that can be recovered through these operations. In fact, in order to recover the highest value from remanufactured products, the collection rates, return timings, and reusability rates should be matched with the active market demand and supply. With these motivations, this paper is aimed at developing analytical models for the efficient use of returns in making production, inventory, and remanufacturing decisions during the active market. More specifically, we consider a stylistic setting where a collector collects used product returns and ships them to the manufacturer who, in turn, recovers value by remanufacturing and supplies products during the active market demand. Naturally, the manufacturer's production, inventory and remanufacturing decisions and costs are influenced by the timing and quantity of the collector's shipments of used product returns. Hence, we investigate the impact of the timing of returns on the profitability of the manufacturer‐collector pair by developing system‐wide cost optimization models. Analyzing the properties of the optimal shipment frequency, we observe that the fastest reverse supply chain may not always be the most efficient one.     

The Effect of Competition on Recovery Strategies

Manufacturers often face a choice of whether to recover the value in their end‐of‐life products through remanufacturing. In many cases, firms choose not to remanufacture, as they are (rightly) concerned that the remanufactured product will cannibalize sales of the higher‐margin new product. However, such a strategy may backfire for manufacturers operating in industries where their end‐of‐life products (cell phones, tires, computers, automotive parts, etc.) are attractive to third‐party remanufacturers, who may seriously cannibalize sales of the original manufacturer. In this paper, we develop models to support a manufacturer's recovery strategy in the face of a competitive threat on the remanufactured product market. We first analyze the competition between new and remanufactured products produced by a monopolist manufacturer and identify conditions under which the firm would choose not to remanufacture its products. We then characterize the potential profit loss due to external remanufacturing competition and analyze two entry‐deterrent strategies: remanufacturing and preemptive collection. We find that a firm may choose to remanufacture or preemptively collect its used products to deter entry, even when the firm would not have chosen to do so under a pure monopoly environment. Finally, we discuss conditions under which each strategy is more beneficial.     

Revenue and Cost Management for Remanufactured Products

This paper considers pricing and remanufacturing strategy of a firm that decides to offer both new and remanufactured versions of its product in the market and is concerned with demand cannibalization. We present a model of demand cannibalization and a behavioral study that estimates a key modeling parameter: a fraction of consumers who switch from new to remanufactured product. As we show, this fraction has an inverted‐U shape, and, thus, the underlying consumer behavior cannot be modeled using the standard methodologies that rely on consumers' willingness to pay (WTP). We find that by incorporating the inverted‐U‐shaped consumer behavior, the firm remanufactures under broader conditions, charges a much lower price, and typically remanufactures more units—leading to an increase of profits from remanufacturing by up to a factor of two as compared with making decisions based on the WTP only. Lastly, we find that the behavior of the low‐price market segment plays an important role because the firm reacts to it differently than the WTP‐based logic would suggest.     

An Analysis of the Eco‐Efficiency of Remanufactured Personal Computers and Mobile Phones

Remanufacturing, long perceived as an environmentally friendly initiative, is supported by a number of governments. Yet, the assumption that remanufacturing is desirable to society has never been systematically investigated. In this paper, we examine the effectiveness and eco‐efficiency of remanufacturing in the personal computer and mobile phone industries. We investigate whether remanufacturing substantially reduces the environmental impact, as measured by cumulative energy demand (CED), generated over the life cycles (LCs) of these products, and the size of any reduction. We also examine the relative eco‐efficiency of remanufacturing compared with virgin manufacturing for these two products, where eco‐efficiency includes both willingness‐to‐pay (WTP) for the products as well as the energy consumed in producing the products. Our main findings are the following. One, remanufacturing is an effective way to reduce the total energy consumed during the LCs of personal computers and mobile phones, with one notable exception, when the life spans of remanufactured products are substantially shorter than the life spans of their new counterparts. Two, a remanufactured personal computer or mobile phone is not always more eco‐efficient than a corresponding new product. Three, the WTP for remanufactured personal computers and mobile phones, and consequently, their eco‐efficiencies, are a function of the prices of the correspondent new products at launch and years elapsed between launch and remanufacturing. Four, remanufactured units are sold at a discount relative to the price of new personal computers and mobile phones. Five, on the whole, the market for remanufactured mobile phones is more eco‐efficient than the market for new mobile phones. Six, the market for remanufactured computers is more eco‐efficient than the market for new computers. Lastly, because the group of remanufactured products is heterogeneous, not all remanufactured units are more eco‐efficient than the average new computer and mobile phone. We conclude with a discussion of the impact of our findings on European WEEE and WEEE‐like legislation.     

考虑奢侈与环保偏好的再制造品最优定价策略

把奢侈、环保偏好消费者考虑到再制造品市场需求中,研究了奢侈与环保消费者构成市场的再制造品最优定价策略,发现奢侈与环保偏好消费者比例不同的市场再制造品最优定价存在差异,并且差异价格随着消费者比例不同有所不同;同时发现在价格歧视的边界上,即奢侈消费者与绿色消费者比例存在某种特定关系时,差异价格可以获得相同的利润,却可以得到不同再制造品数量,这为制造商在利润不受损下,实现社会环保目标、提升绿色形象创造了一条路径。然后根据上述的不同的市场结构特征,建议制造商采取相应价格歧视策略,并通过算例验证了上述的结论。     

Models to explore remanufacturing as a competitive strategy under duopoly

Remanufacturing is a product recovery option that upgrades the quality of returns to “as-good-as-new” conditions. Remanufactured products cost less, and are sold with the same or better warranty as for new products. In this paper, we consider a duopoly environment with two manufacturers in direct competition selling their respective new products on the primary market. Specifically, we address the question: In case one manufacturer decides to remanufacture and sell remanufactured products on the price-sensitive secondary market, will it get a competitive advantage over the other manufacturer? We develop theoretical models for a single period and two periods, and show that under the stated assumptions, remanufacturing is almost always more profitable than when there is no remanufacturing. Although remanufacturing may cannibalize new product sales, the combined profitability and market share of the (re)manufacturer on account of new and remanufactured product sales improve over new product sales only. For the competitor, we get mixed results. In some situations, its profitability improves; in some others, it worsens. We also conduct sensitivity analyses with respect to the substitution parameters, price-sensitivity of the secondary market, rate of return of used products (cores), relative market shares of the manufacturers, and relative sizes of the primary and secondary markets. We conclude the paper with managerial implications and directions for future research.     

混合需求下考虑专利保护因素的闭环供应链定价与协调

在新产品需求为随机需求,再制造产品需求受销售价格影响的混合需求条件下,以博弈论为主要工具,研究了受专利保护的再制造闭环供应链的定价与协调问题,分析了集中决策和分散决策两种情形下的新产品最优订购量、废旧产品最优回收价格、最优专利许可费用、再制造品最优零售价格以及供应链的最优利润,并通过收益分享一费用分担契约对闭环供应链系统进行了协调,并通过数值算例验证了集中决策和分散决策情形下再制造成本节约对供应链成员的最优决策和利润的影响,以及收益分享.费用分担契约对闭环供应链的协调效果。研究表明再制造受专利保护的情况下,原制造商能通过专利许可费来影响第三方再制造商回收的废旧产品的回收价格和回收量,进而去影响原制造商和第三方再制造商的收益。     

Joint Life‐Cycle Dynamics of New and Remanufactured Products

Many products considered for remanufacturing are durables that exhibit a well‐pronounced product life cycle—they diffuse gradually through the market. The remanufactured product, which is a cheaper substitute for the new product, is often put on the market during the life cycle of the new product and affects its sales dynamics. In this paper, we study the integrated dynamic management of a portfolio of new and remanufactured products that progressively penetrate a potential market over the product life cycle. To this end, we extend the Bass diffusion model in a way that maintains the two essential features of remanufacturing settings: (a) substitution between new and remanufactured products, and (b) a constraint on the diffusion of remanufactured products due to the limited supply of used products that can be remanufactured. We identify characteristics of the diffusion paths of new and remanufactured products. Finally, we analyze the impact of levers such as remanufacturability level, capacity profile and reverse channel speed on profitability.     

Channel Strategies for Durable Goods: Coexistence of Selling and Leasing to Individual and Corporate Consumers

In durable goods markets, such as those for automobiles or computers, the coexistence of selling and leasing is common as is the existence of both corporate and individual consumers. Leases to corporate consumers affect the price of used goods on the second‐hand market which in turn affect the buying and leasing behavior of individual consumers. The setting of prices (or volumes) for sale and lease to individual and corporate consumers is a complicated problem for manufacturers. We consider a manufacturer who concurrently sells and leases a finitely durable good to both individual and corporate consumers. The interaction between the manufacturer and consumers is modeled as a dynamic sequential game, where each player seeks to maximize its own payoff over an infinite horizon. We study how the corporate channel substitutability of new goods and used goods and transaction costs in the second‐hand market affect the manufacturer's pricing decisions, consumer behavior, and social welfare in the retail market. Making a number of simplifying assumptions, including two‐period lifetime for the finitely durable goods, we consider Markov Perfect Equilibrium as the solution concept. We show that the manufacturer can maximize her profit by segmenting consumers according to their willingness to pay. Selling and leasing are the mechanisms used for price discrimination in the retail market. We show that as she leases a larger share of her production to the corporate consumer, (1) the manufacturer does not necessarily have to adjust the optimal selling price of new goods to individual consumers, and the volume of sales of new goods to individual consumers can stay the same; (2) the manufacturer does increase the retail lease price, and the number of individual leases decreases; (3) the net supply of used goods on the market increases, leading to a lower market price for used goods; and (4) more individual consumers are able to participate in the market, and their collective welfare or net utility improves. We also show that as production costs increase the manufacturer increases prices, reducing volumes across all channels. When transaction costs increase, the manufacturer reduces leasing in both corporate and retail channels.     

Optimal Policies for Selling New and Remanufactured Products

Because of environmental and economic reasons, an increasing number of original equipment manufacturers (OEMs) nowadays sell both new and remanufactured products. When both products are available, customers will buy the one that gives them a higher (and non‐negative) utility. Thus, if the firm does not price the products properly, then product cannibalization may arise and its revenue may be adversely impacted. In this paper, we study the pricing problem of a firm that sells both new and remanufactured products over a finite planning horizon. Customer demand processes for both new and remanufactured products are random and price‐sensitive, and product returns (also called cores) are random and remanufactured upon receipt. We characterize the optimal pricing and manufacturing policies that maximize the expected total discounted profit. If new products are made‐to‐order (MTO), we show that when the inventory level of remanufactured product increases, the optimal price of remanufactured product decreases while the price difference between new and remanufactured products increases; however, the optimal selling price of new product may increase or decrease. If new products are made to stock (MTS), then the optimal manufacturing policy is of a base‐stock policy with the base‐stock level decreasing in the remanufactured product inventory level. To understand the potential benefit in implementing an MTO system, we study the difference between the value functions of the MTO and MTS systems, and develop lower and upper bounds for it. Finally, we study several extensions of the base model and show that most of our results extend to those more general settings.     

基于产品寿命次数的闭环供应链生产优化问题研究

本文研究了单一厂商制造/再制造集成系统的多期生产优化问题.首先,基于闭环供应链的全生命周期思想,通过引入产品寿命次数的概念构造了不超过产品寿命次数而能够进行再制造的回收产品与新制造产品之间的数量关系;接着,验证了将可再制造产品全部用于再制造时能够实现利润最大化的目标;然后,给出了几个有关解的性质;最后,通过算例对本文模型的性质和规律作进一步分析.     

Does the Entry of Third‐Party Remanufacturers Always Hurt Original Equipment Manufacturers?

Researchers and managers broadly agree that the entry of third‐party remanufacturers (TPRs) hurts original equipment manufacturers (OEMs) because of the cannibalization problem. Thus, OEMs should always try to deter the entry of TPRs. In this article, we present a contrasting view: Competing OEMs without remanufacturing capacities sometimes benefit from the entry of TPRs. The key feature of our model is that there exists a group of newness‐conscious consumers in the market who do not buy the remanufactured product regardless of the price, whereas a group of functionality‐oriented consumers (FOCs) may buy a remanufactured one at a low price. In a steady‐state‐period setting, we investigate how the number of TPRs affects the OEMs’ profits. We find that, from the perspective of two competing OEMs: (i) The entry of one or many TPRs may lead to a higher profit; (ii) The entry of many TPRs may be better than the entry of one TPR; and (iii) The impact of the entry of one or many TPRs may be reversed as FOCs’ willingness‐to‐pay for the remanufactured product increases.     

基于异质性消费群体的再制造产品的定价策略研究

消费者对新产品和再制造产品具有不同支付意愿。在此基础上,对再制造产品具有不同接受度的异质性消费群体分别建立了再制造产品差异化定价模型和单一定价策略模型。研究了制造商对新产品和再制造产品进行差异化定价时,新产品和再制造产品的最优定价和与之相对应的产品回收率,并与单一定价策略进行了比较分析。通过数值仿真,讨论了不同参数对单一定价策略和差异化定价策略的利润和产品回收率的影响,并给出了相关结论。     

Lifecycle Pricing for Installed Base Management with Constrained Capacity and Remanufacturing

Installed base management is the policy in which the manufacturer leases the product to consumers, and bundles repair and maintenance services along with the product. In this article, we investigate for the optimal leasing price and leasing duration decisions by a monopolist when the production and servicing capacity are constrained. The effect of diffusion of consumers in the installed base is considered, with the ownership of the product resting with the monopolist during the product lifecycle. The monopolist operating the installed base jointly optimizes the profits from leasing the product/service bundle along with maintenance revenues and remanufacturing savings. We formulate the manufacturer's problem as an optimal control problem and show that the optimal pricing strategy of the firm should be a skimming strategy. We also find that the effect of remanufacturing savings on the pricing decision and the length of the leasing duration changes significantly depending on the duration of the product's lifecycle. If the product lifecycle is long and remanufacturing savings are low, the firm should offer a shorter leasing duration, whereas if the remanufacturing savings are high, the firm should optimally offer a higher leasing duration. In contrast, if the time duration of the product lifecycle is low and remanufacturing savings are low, the firm prefers to offer a shorter leasing duration, whereas if the remanufacturing savings are high, the firm should optimally have a longer leasing duration. The article also shows that if the production capacity is small, the manufacturer increases the leasing duration. If the production capacity is very small, the manufacturer sets the leasing duration to be equal to the product lifecycle and does not use remanufacturing.     

考虑产品可替换的再制造产品选择决策

再制造是处理回收产品的一种重要方式.本文研究了一种简单的产品可替换的再制造决策模型,再制造商生产的产品有高质量和低质量两种,高质量的再制造产品数量超过需求量时,可以作为低质量产品的替换品销售.最后通过仿真算例说明了产品可替换策略比不可替换具有优势.