A new sampling method for estimating the population mean

A double L ranked set sampling (DLRSS) method is suggested for estimating the population mean. The DLRSS is compared with the simple random sampling (SRS), ranked set sampling (RSS) and L ranked set sampling (LRSS) methods based on the same number of measured units. The conditions for which the suggested estimator performs better than the other estimators are derived. It is found that, the suggested DLRSS estimator is an unbiased of the population mean, and is more efficient than its counterparts using SRS, RSS, and LRSS methods. Real data sets are used for illustration.     

Estimation of the population mean and median using truncation-based ranked set samples

In this paper, a new sampling method is suggested, namely truncation-based ranked set samples (TBRSS) for estimating the population mean and median. The suggested method is compared with the simple random sampling (SRS), ranked set sampling (RSS), extreme ranked set sampling (ERSS) and median-ranked set sampling (MRSS) methods. It is shown that for estimating the population mean when the underlying distribution is symmetric, TBRSS estimator is unbiased and it is more efficient than the SRS estimator based on the same number of measured units. For asymmetric distributions considered in this study, TBRSS estimator is more efficient than the SRS for all considered distributions except for exponential distribution when the selection coefficient gets large. When compared with ERSS and MRSS methods, TBRSS performs well with respect to ERSS for all considered distributions except for U(0, 1) distribution, while TBRSS efficiency is higher than that of MRSS for U(0, 1) distribution. For estimating the population median, the TBRSS estimators have higher efficiencies when compared with SRS and ERSS. A real data set is used to illustrate the suggested method.     

Robust extreme ranked set sampling

In this paper, a robust extreme ranked set sampling (RERSS) procedure for estimating the population mean is introduced. It is shown that the proposed method gives an unbiased estimator with smaller variance, provided the underlying distribution is symmetric. However, for asymmetric distributions a weighted mean is given, where the optimal weights are computed by using Shannon's entropy. The performance of the population mean estimator is discussed along with its properties. Monte Carlo simulations are used to demonstrate the performance of the RERSS estimator relative to the simple random sample (SRS), ranked set sampling (RSS) and extreme ranked set sampling (ERSS) estimators. The results indicate that the proposed estimator is more efficient than the estimators based on the traditional sampling methods.     

Estimation of mean based on modified robust extreme ranked set sampling

In this paper, double robust extreme ranked set sampling (DRERSS) and its properties for estimating the population mean are considered. It turns out that, when the underlying distribution is symmetric, DRERSS gives unbiased estimators of the population mean. Also, it is found that DRERSS is more efficient than the simple random sampling (SRS), ranked set sampling (RSS), and extreme ranked set sampling (ERSS) methods. For asymmetric distributions considered in this study, the DRERSS has a small bias and it is more efficient than SRS, RSS, and ERSS. A real data set is used to illustrate the DRERSS method.     

L Ranked Set Sampling: A Generalization Procedure for Robust Visual Sampling

In this article, a robust ranked set sampling (LRSS) scheme for estimating population mean is introduced. The proposed method is a generalization for many types of ranked set sampling that introduced in the literature for estimating the population mean. It is shown that the LRSS method gives unbiased estimator for the population mean with minimum variance providing that the underlying distribution is symmetric. However, for skewed distributions a weighted mean is given, where the optimal weights is computed by using Shannon's entropy. The performance of the population mean estimator is discussed along with its properties. Monte Carlo comparisons for detecting outliers are made with the traditional simple random sample and the ranked set sampling for some distributions. The results indicate that the LRSS estimator is superior alternative to the existing methods.     

General procedure for estimating the population mean using ranked set sampling

In this paper, we suggest a class of estimators for estimating the population mean ? of the study variable Y using information on X?, the population mean of the auxiliary variable X using ranked set sampling envisaged by McIntyre [A method of unbiased selective sampling using ranked sets, Aust. J. Agric. Res. 3 (1952), pp. 385–390] and developed by Takahasi and Wakimoto [On unbiased estimates of the population mean based on the sample stratified by means of ordering, Ann. Inst. Statist. Math. 20 (1968), pp. 1–31]. The estimator reported by Kadilar et al. [Ratio estimator for the population mean using ranked set sampling, Statist. Papers 50 (2009), pp. 301–309] is identified as a member of the proposed class of estimators. The bias and the mean-squared error (MSE) of the proposed class of estimators are obtained. An asymptotically optimum estimator in the class is identified with its MSE formulae. To judge the merits of the suggested class of estimators over others, an empirical study is carried out.     

Two-stage cluster sampling with hybrid ranked set sampling in the secondary sampling frame

In surveys of natural resources in agriculture, ecology, fisheries, forestry, environmental management, etc., cost-effective sampling methods are of major concern. In this paper, we propose a two-stage cluster sampling (TSCS) in integration with the hybrid ranked set sampling (HRSS)—named TSCS-HRSS—in the second stage of sampling for estimating the population mean. The TSCS-HRSS scheme encompasses several existing ranked set sampling (RSS) schemes and may help in selecting a smaller number of units to rank. It is shown both theoretically and numerically that the TSCS-HRSS provides an unbiased estimator of the population mean and it is more precise than the mean estimators based on TSCS with SRS and RSS schemes. An unbiased estimator of the variance of the proposed mean estimator is also derived. A similar trend is observed when studying the impact of imperfect rankings on the performance of the TSCS-HRSS based mean estimator.     

On stratified bivariate ranked set sampling with optimal allocation for naïve and ratio estimators

The purpose of the current work is to introduce stratified bivariate ranked set sampling (SBVRSS) and investigate its performance for estimating the population mean using both naïve and ratio methods. The properties of the proposed estimator are derived along with the optimal allocation with respect to stratification. We conduct a simulation study to demonstrate the relative efficiency of SBVRSS as compared to stratified bivariate simple random sampling (SBVSRS) for ratio estimation. Data that consist of weights and bilirubin levels in the blood of 120 babies are used to illustrate the procedure on a real data set. Based on our simulation, SBVRSS for ratio estimation is more efficient than using SBVSRS in all cases.     

On the Kaplan–Meier estimator based on ranked set samples

When quantification of all sampling units is expensive but a set of units can be ranked, without formal measurement, ranked set sampling (RSS) is a cost-efficient alternate to simple random sampling (SRS). In this paper, we study the Kaplan–Meier estimator of survival probability based on RSS under random censoring time setup, and propose nonparametric estimators of the population mean. We present a simulation study to compare the performance of the suggested estimators. It turns out that RSS design can yield a substantial improvement in efficiency over the SRS design. Additionally, we apply the proposed methods to a real data set from an environmental study.     

Estimating the population proportion in modified ranked set sampling methods

In this paper, proportion estimators and associated variance estimators are proposed for a binary variable with a concomitant variable based on modified ranked set sampling methods, which are extreme ranked set sampling (ERSS), median ranked set sampling (MRSS), percentile ranked set sampling (Per-RSS) and L ranked set sampling (LRSS) methods. The Monte Carlo simulation study is performed to compare the performance of the estimators based on bias, mean squared error, and relative efficiency for different levels of correlation coefficient, set and cycle sizes under normal and log-normal distributions. Moreover, the study is supported with real data application.     

Calibration estimator of population mean under stratified ranked set sampling design

Calibration method adjusts the original design weights to improve the estimates by using auxiliary information. In this article we have proposed new calibration estimators under stratified ranked set sampling design and derive the estimator of variance of calibration estimator. A simulation study is carried out to see the performance of proposed estimators.     

Partial groups ranked set sampling and mean estimation

Ranked set sampling (RSS) is an advanced sampling method which is very effective for estimating mean of the population when exact measurement of observation is difficult and/or expensive. Balanced Groups RSS (BGRSS) is one of the modification of RSS where only the lowest, the median and the largest ranked units are taken into account. Although BGRSS is advantageous and useful for some specific cases, it has strict restrictions regarding the set size which could be problematic for sampling plans. In this study, we make an improvement on BGRSS and propose a new design called Partial Groups RSS which offers a more flexible sampling plan providing the independence of the set size and sample size. Partial Groups RSS also has a cost advantage over BGRSS. We construct a Monte Carlo simulation study comparing the performance of the mean estimators of the proposed sampling design and BGRSS according to their sampling costs and mean squared errors for various type of distributions. In addition, we give a biometric data application for investigating the efficiency of Partial Groups RSS in real life applications.     

基于排序集样本和辅助变量中位数的均值比率估计方法

排序集抽样下利用辅助变量中位数构建了总体均值的改进比率估计模型,分析了该比率估计量的偏差和均方误差,并与简单随机抽样下的比率估计比较,证明了改进后的比率估计均方误差更小。以农作物播种面积和产量为研究对象进行实例分析,研究表明,基于排序集样本和辅助变量中位数的比率估计方法可以有效提高估计精度,验证了该构造方法的可行性。     

Estimation of bivariate characteristics using ranked set sampling

The superiority of ranked set sampling (RSS) over simple random sampling (SRS) for estimating the mean of a population is well known. This paper introduces and investigates a bivariate version of RSS for estimating the means of two characteristics simultaneously. It turns out that this technique is always superior to SRS and the usual univariate RSS of the same size. The performance of this procedure for a specific distribution can be evaluated using simulation or numerical computation. For the bivariate normal distribution, the efficiency of the procedure with respect to that of SRS is evaluated exactly for set size m = 2 and 3. The paper shows that the proposed estimator is more efficient than the regression RSS estimators proposed by Yu & Lam (1997) and Chen (2001). Real data that consist of heights and diameters of 399 trees are used to illustrate the procedure. The procedure can be generalized to the case of multiple characteristics.     

Estimation of the distribution function under hybrid ranked set sampling

Recently, a hybrid ranked set sampling (HRSS) scheme has been proposed in the literature. The HRSS scheme encompasses several existing ranked set sampling (RSS) schemes, and it is a cost-effective alternative to the classical RSS and double RSS schemes. In this paper, we propose an improved estimator for estimating the cumulative distribution function (CDF) using HRSS. It is shown, both theoretically and numerically, that the CDF estimator under HRSS scheme is unbiased and its variance is always less than the variance of the CDF estimator with simple random sampling (SRS). An unbiased estimator of the variance of CDF estimator using HRSS is also derived. Using Monte Carlo simulations, we also study the performances of the proposed and existing CDF estimators under both perfect and imperfect rankings. It turns out that the proposed CDF estimator is by far a superior alternative to the existing CDF estimators with SRS, RSS and L-RSS schemes. For a practical application, a real data set is considered on the bilirubin level of babies in neonatal intensive care.     

Estimation of Population Variance from Multi-ranker Ranked Set Sampling Designs

In this article, we develop an estimator for a population variance based on a multi-ranker ranked set sampling design. In a multi-ranker design, the units are ranked by more than one ranker allowing ties whenever the confidence level of the rankers is low. The ranking information of all rankers is then combined in a meaningful way to create a single measure. This measure is used to construct the sampling design and a new estimator for the population variance. The article investigates the bias and relative efficiency of the proposed variance estimator. It is shown that the new estimator performs as good as or better than its competitors in the literature.     

A Horvitz-Thompson Estimator of the Population Mean Using Inclusion Probabilities of Ranked Set Sampling

In this study, we define the Horvitz-Thompson estimator of the population mean using the inclusion probabilities of a ranked set sample in a finite population setting. The second-order inclusion probabilities that are required to calculate the variance of the Horvitz-Thompson estimator were obtained. The Horvitz-Thompson estimator, using the inclusion probabilities of ranked set sample, tends to be more efficient than the classical ranked set sampling estimator especially in a positively skewed population with small sizes. Also, we present a real data example with the volatility of gasoline to illustrate the Horvitz-Thompson estimator based on ranked set sampling.     

On stratified bivariate ranked set sampling for regression estimators

We investigate the relative performance of stratified bivariate ranked set sampling (SBVRSS), with respect to stratified simple random sampling (SSRS) for estimating the population mean with regression methods. The mean and variance of the proposed estimators are derived with the mean being shown to be unbiased. We perform a simulation study to compare the relative efficiency of SBVRSS to SSRS under various data-generating scenarios. We also compare the two sampling schemes on a real data set from trauma victims in a hospital setting. The results of our simulation study and the real data illustration indicate that using SBVRSS for regression estimation provides more efficiency than SSRS in most cases.     

Modified Maximum Likelihood Estimator of Scale Parameter Using Moving Extremes Ranked Set Sampling

A modified maximum likelihood estimator (MMLE) of scale parameter is considered under moving extremes ranked set sampling (MERSS), and its properties are obtained. For some usual scale distributions, we obtain explicit form of the MMLE and prove the MMLE is an unbiased estimator under MERSS. The simulation results show that the MMLE using MERSS is always more efficient than the MLE using simple random sampling, when the same sample size is used. The simulation results also show that the loss of efficiency in using the MMLE instead of the MLE is very small for small sample.     

On kernel density estimation based on different stratified sampling with optimal allocation

Kernel density estimation is probably the most widely used non parametric statistical method for estimating probability densities. In this paper, we investigate the performance of kernel density estimator based on stratified simple and ranked set sampling. Some asymptotic properties of kernel estimator are established under both sampling schemes. Simulation studies are designed to examine the performance of the proposed estimators under varying distributional assumptions. These findings are also illustrated with the help of a dataset on bilirubin levels in babies in a neonatal intensive care unit.