Asymptotics of the run lengths of two control charts

The CUSUM control chart proposed by Page is a widely used in monitoring the quality of manufacturing processes. The Shiryayev-Roberts (S-R) control chart due to Shiryayev (1963) and Roberts (1988) is one of its competitors, This paper is concerned with the distribution properties of the run lengths of these two control charts. In context of continuous time, we first give the expansions of the higher moments of these run lengths. Then, we show that the asymptotic distributions of these run lengths are either some exponential distributions, or the distribution of the suprema of a standard Brownian motion, or some normal distributions, according to whether the μ<δ/2,μ =δ/2 and μ>δ/2. Here δ is the reference value of the above charts. Some similar results are also obtained in the context of discrete time.     

A mixed GWMA–CUSUM control chart for monitoring the process mean

The memory-type control charts are widely used in the process and service industries for monitoring the production processes. The reason is their sensitivity to quickly react against the small process disturbances. Recently, a new cumulative sum (CUSUM) chart has been proposed that uses the exponentially weighted moving average (EWMA) statistic, called the EWMA–CUSUM chart. Similarly, in order to further enhance the sensitivity of the EWMA–CUSUM chart, we propose a new CUSUM chart using the generally weighted moving average (GWMA) statistic, called the GWMA–CUSUM chart, for efficiently monitoring the process mean. The GWMA–CUSUM chart encompasses the existing CUSUM and EWMA–CUSUM charts. Extensive Monte Carlo simulations are used to explore the run length profiles of the GWMA–CUSUM chart. Based on comprehensive run length comparisons, it turns out that the GWMA–CUSUM chart performs substantially better than the CUSUM, EWMA, GWMA, and EWMA–CUSUM charts when detecting small shifts in the process mean. An illustrative example is also presented to explain the implementation and working of the EWMA–CUSUM and GWMA–CUSUM charts.     

An optimal design of CUSUM control charts for binomial counts

The Shewhart p-chart or np-chart is commonly used for monitoring the counts of non-conforming items which are usually well modelled by a binomial distribution with parameters n and p where n is the number of items inspected each time and p is the process fraction of non-conforming items produced. It is well known that the Shewhart chart is not sensitive to small shifts in p. The cumulative sum (CUSUM) chart is a far more powerful charting procedure for detecting small shifts in p and only marginally less powerful in detecting large shifts in p. The choice of chart parameters of a Shewhart chart is well documented in the quality control literature. On the other hand, very little has been done for the more powerful CUSUM chart, possibly due to the fact that the run length distribution of a CUSUM chart is much harder to compute. An optimal design strategy is given here which allows the chart parameters of an optimal CUSUM chart to be determined easily. Optimal choice of n and the relationship between the CUSUM chart and the sequential probability ratio test are also investigated.     

A Combination of CUSUM Charts for Monitoring a Zero-Inflated Poisson Process

The Zero-inflated Poisson distribution (ZIP) is used to model the defects in processes with a large number of zeros. We propose a control charting procedure using a combination of two cumulative sum (CUSUM) charts to detect increases in the parameters of ZIP process, one is a conforming run length (CRL) CUSUM chart and another is a zero truncated Poisson (ZTP) CUSUM chart. The control limits of the control charts are obtained using both Markov chain-based methods and simulations. Simulation experiments show that the proposed method outperforms an existing method. Finally, a real example is presented.     

Conditional design of the CUSUM median chart for the process position when process parameters are unknown

In practice, different practitioners will use different Phase I samples to estimate the process parameters, which will lead to different Phase II control chart's performance. Researches refer to this variability as between-practitioners-variability of control charts. Since between-practitioners-variability is important in the design of the CUSUM median chart with estimated process parameters, the standard deviation of average run length (SDARL) will be used to study its properties. It is shown that the CUSUM median chart requires a larger amount of Phase I samples to sufficiently reduce the variation in the in-control ARL of the CUSUM median chart. Considering the limitation of the amount of the Phase I samples, a bootstrap approach is also used here to adjust the control limits of the CUSUM median chart. Comparisons are made for the CUSUM and Shewhart median charts with estimated parameters when using the adjusted- and unadjusted control limits and some conclusions are made.     

A CUSUM control chart for monitoring the variance when parameters are estimated

CUSUM control chart has been widely used for monitoring the process variance. It is usually used assuming that the nominal process variance is known. However, several researchers have shown that the ability of control charts to signal when a process is out of control is seriously affected unless process parameters are estimated from a large in-control Phase I data set. In this paper we derive the run length properties of a CUSUM chart for monitoring dispersion with estimated process variance and we evaluate the performance of this chart by comparing it with the same chart but with assumed known process parameters.     

Measurement error effect on the CUSUM control chart

The performance of the cumulative sum (CUSUM) control chart for the mean when measurement error exists is investigated. It is shown that the CUSUM chart is greatly affected by the measurement error. A similar result holds for the case of the CUSUM chart for the mean with linearly increasing variance. In this paper, we consider multiple measurements to reduce the effect of measurement error on the charts performance. Finally, a comparison of the CUSUM and EWMA charts is presented and certain recommendations are given.     

The Continuous Run Sum Chart

The run sum chart is an effective two-sided chart that can be used to monitor for process changes. It is known that it is more sensible than the Shewhart chart with runs rules and its performance improves as the number of regions increases. However, as the number of regions increses the resulting chart has more parameters to be defined and its design becomes more involved. In this article, we introduce a one-parameter run sum chart. This chart accumulates scores equal to the subgroup means and signals when the cummulative sum exceeds a limit value. A fast initial response feature is proposed and its run length distribution function is found by a set of recursive relations. We compare this chart with other charts suggested in the literature and find it competitive with the CUSUM, the FIR CUSUM, and the combined Shewhart FIR CUSUM schemes.     

On increasing the sensitivity of mixed EWMA–CUSUM control charts for location parameter

Control chart is an important statistical technique that is used to monitor the quality of a process. Shewhart control charts are used to detect larger disturbances in the process parameters, whereas cumulative sum (CUSUM) and exponential weighted moving average (EWMA) are meant for smaller and moderate changes. In this study, we enhanced mixed EWMA–CUSUM control charts with varying fast initial response (FIR) features and also with a runs rule of two out of three successive points that fall above the upper control limit. We investigate their run-length properties. The proposed control charting schemes are compared with the existing counterparts including classical CUSUM, classical EWMA, FIR CUSUM, FIR EWMA, mixed EWMA–CUSUM, 2/3 modified EWMA, and 2/3 CUSUM control charting schemes. A case study is presented for practical considerations using a real data set.     

A HEWMA-CUSUM control chart for the Weibull distribution

The Weibull distribution is one of the most popular distributions for lifetime modeling. However, there has not been much research on control charts for a Weibull distribution. Shewhart control is known to be inefficient to detect a small shift in the process, while exponentially weighted moving average (EWMA) and cumulative sum control chart (CUSUM) charts have the ability to detect small changes in the process. To enhance the performance of a control chart for a Weibull distribution, we introduce a new control chart based on hybrid EWMA and CUSUM statistic, called the HEWMA-CUSUM chart. The performance of the proposed chart is compared with the existing chart in terms of the average run length (ARL). The proposed chart is found to be more sensitive than the existing chart in ARL. A simulation study is provided for illustration purposes. A real data is also applied to the proposed chart for practical use.     

Comparison of different control charts for a Weibull process with type-I censoring

Some control charts have been proposed to monitor the mean of a Weibull process with type-I censoring. One type of control charts is to monitor changes in the scale parameter because it indicates changes in the mean. With this approach, we compare different control charts such as Shewhart-type and exponentially weighted moving average (EWMA) charts based on conditional expected value (CEV) and cumulative sum (CUSUM) chart based on likelihood-ratio. A simulation approach is employed to compute control limits and average run lengths. The results show that the CUSUM chart has the best performance. However, the EWMA-CEV chart is recommendable for practitioners with its competitive performance and ease of use advantage. An illustrative example is also provided.     

Bayesian X̄ control limits for exponentially distributed measurements

This article deals with the construction of an X? control chart using the Bayesian perspective. We obtain new control limits for the X? chart for exponentially distributed data-generating processes through the sequential use of Bayes’ theorem and credible intervals. Construction of the control chart is illustrated using a simulated data example. The performance of the proposed, standard, tolerance interval, exponential cumulative sum (CUSUM) and exponential exponentially weighted moving average (EWMA) control limits are examined and compared via a Monte Carlo simulation study. The proposed Bayesian control limits are found to perform better than standard, tolerance interval, exponential EWMA and exponential CUSUM control limits for exponentially distributed processes.     

The effect of serial correlation on the in-control average run length of cumulative score charts

The cumulative sum (CUSUM) technique is well-established in theory and practice of process control. For a variant of the CUSUM technique, the cumulative score chart, we investigate the effect of serial correlation on the in-control average run length (ARL). The Shewhart chart is a special case of the cumulative score chart. Using the fact that the cumulative score statistic is a correlated random walk with a reflecting and an absorbing barrier, we derive an approximate but closed-form expression for the ARL of a control variable that follows a first-order autoregressive process with normally distributed disturbances. We also give an expression for the asymptotic (large in-control ARL) case. Our method of approximation gives ARL values that are in good agreement with Monte Carlo estimates of the true values. For positive serial correlation the ARL decreases with increasing value of the correlation coefficient. For increasing negative serial correlation, the ARL may decrease or increase depending on the choice of the parameters of the chart; parameterizations can be found which are rather insensitive for negative serial correlation. We use our results to give recommendations on how to modify the control chart procedure in the presence of serial correlation.     

Dynamic sampling plans in on-line control charts

Three simple dynamic sampling plans for detecting the change point are investigated in the discrete-time case. The first is a two-rate sampling CUSUM procedure. The second is a two-rate sampling Shiryayev-Roberts procedure. The third is a periodic sequential testing procedure. Two problems are discussed. First, simple design methods are provided for practical use. Second, a comparison between the three plans is made in the continuous-time case, which shows that by properly choosing the design parameters, the three plans can be made equally efficient in certain senses.     

Distribution-Free Exceedance CUSUM Control Charts for Location

Distribution-free (nonparametric) control charts can be useful to the quality practitioner when the underlying distribution is not known. A Phase II nonparametric cumulative sum (CUSUM) chart based on the exceedance statistics, called the exceedance CUSUM chart, is proposed here for detecting a shift in the unknown location parameter of a continuous distribution. The exceedance statistics can be more efficient than rank-based methods when the underlying distribution is heavy-tailed and/or right-skewed, which may be the case in some applications, particularly with certain lifetime data. Moreover, exceedance statistics can save testing time and resources as they can be applied as soon as a certain order statistic of the reference sample is available. Guidelines and recommendations are provided for the chart's design parameters along with an illustrative example. The in- and out-of-control performances of the chart are studied through extensive simulations on the basis of the average run-length (ARL), the standard deviation of run-length (SDRL), the median run-length (MDRL), and some percentiles of run-length. Further, a comparison with a number of existing control charts, including the parametric CUSUM chart and a recent nonparametric CUSUM chart based on the Wilcoxon rank-sum statistic, called the rank-sum CUSUM chart, is made. It is seen that the exceedance CUSUM chart performs well in many cases and thus can be a useful alternative chart in practice. A summary and some concluding remarks are given.     

Evaluation of control charts under linear trend

The performance of several control charting schemes is studied when the process mean changes as a linear trend. The control charts considered include the Shewhart chart, the Shewhart chart supplemented with runs rules, the cumulative sum (CUSUM) chart, the exponentially weighted moving average (EWMA) chart, and a generalized control chart.     

Enhanced adaptive CUSUM charts for process mean

A statistical quality control chart is an important tool of the statistical process control, which is widely used to control and monitor a production process. The CUSUM chart is designed to detect a specific shift, provided that the shift size is known in advance. In practice, however, shift sizes are rarely known. It is then customary to use an adaptive CUSUM chart, which can effectively detect a range of shift sizes. In this paper, we enhance the sensitivities of the improved adaptive CUSUM mean charts using an auxiliary-information-based (AIB) mean estimator. The run length performances of the proposed charts are compared with those of the AIB adaptive and non-adaptive CUSUM charts in terms of the average run length (ARL), extra quadratic loss, and integral relative ARL. These run length comparisons reveal that the proposed charts are more sensitive than the existing charts when detecting different kinds of shift in the process mean. An example is given to demonstrate the implementation of existing and proposed charts.     

A new adaptive EWMA control chart using auxiliary information for monitoring the process mean

The adaptive memory-type control charts, including the adaptive exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) charts, have gained considerable attention because of their excellent speed in providing overall good detection over a range of mean shift sizes. In this paper, we propose a new adaptive EWMA (AEWMA) chart using the auxiliary information for efficiently monitoring the infrequent changes in the process mean. The idea is to first estimate the unknown process mean shift using an auxiliary information based mean estimator, and then adaptively update the smoothing constant of the EWMA chart. Using extensive Monte Carlo simulations, the run length profiles of the AEWMA chart are computed and explored. The AEWMA chart is compared with the existing control charts, including the classical EWMA, CUSUM, synthetic EWMA and synthetic CUSUM charts, in terms of the run length characteristics. It turns out that the AEWMA chart performs uniformly better than these control charts when detecting a range of mean shift sizes. An illustrative example is also presented to demonstrate the working and implementation of the proposed and existing control charts.     

Early warning CUSUM plans for surveillance of negative binomial daily disease counts

Automated public health surveillance of disease counts for rapid outbreak, epidemic or bioterrorism detection using conventional control chart methods can be hampered by over-dispersion and background (‘in-control’) mean counts that vary over time. An adaptive cumulative sum (CUSUM) plan is developed for signalling unusually high incidence in prospectively monitored time series of over-dispersed daily disease counts with a non-homogeneous mean. Negative binomial transitional regression is used to prospectively model background counts and provide ‘one-step-ahead’ forecasts of the next day's count. A CUSUM plan then accumulates departures of observed counts from an offset (reference value) that is dynamically updated using the modelled forecasts. The CUSUM signals whenever the accumulated departures exceed a threshold. The amount of memory of past observations retained by the CUSUM plan is determined by the offset value; a smaller offset retains more memory and is efficient at detecting smaller shifts. Our approach optimises early outbreak detection by dynamically adjusting the offset value. We demonstrate the practical application of the ‘optimal’ CUSUM plans to daily counts of laboratory-notified influenza and Ross River virus diagnoses, with particular emphasis on the steady-state situation (i.e. changes that occur after the CUSUM statistic has run through several in-control counts).