Using the chinese remainder theorem in constructing confounded designs for mixed factorial experiments

A procedure for constructing confounded designs for mixed factorial experiments derived from the Chinese Remainder Theorem is presented. The present procedure as well as others, all through use of modular arithmetic, are compared.     

A simple method for constructing confounded designs for mixed factorial experiments

This paper presents the sinplesr procedure that uses wodular aryithmetic for constructing confounded designs for mixed factorial experiments. The present procedure and the classical one for confounding in symmetrical factorial experiments are both at the same mathema.tical level. The present procedure is written for

practitioners and is lllustrared with several examples.     

Balanced factorial experiments.II

Pun and Nigam(1976) have developed the theory of Balanced Factorial Experiments (BFE) in varying replicates and varying block sizes. The present work gives some further results on BFE. It is established that any BFE with merged treatments (or collapsed levels in the sense of Addleman, 1962) is again a BFE, It is shown that BFE implies and is implied by a Partially Efficiency Balanced (PEB) design. Interestingly, the results of Pearce (1971) on merging of two treatments can also be obtained as particular cases.     

Efficiency of bailey's trigonometric levels in factorial experiments

Bailey has shown that choice of certain trigonometlk levels for factors in a symmetrical confounded factorial design is more efficient for quantitative treatments. This paper introduces certain incidence matrices associated with the flats of different pencils of such designs to obtain an explicit expression for the efficiency and also gives a simpler derivation of Bailey's results.     

Optimal design results for 2n factorial paired comparison experiments

Four general classes of partially balanced designs for 2ⁿ factorials, corresponding to four different forms of a general null hypothesis H on factorial effects, are presented. For the typical design in each class, the simplified form of the non-centrality parameter λ² of the asymptotic chi-square distribution of the likelihood ratio statistic for testing the corresponding form of H₀ is derived under defined local alternatives. Optimal designs d₁ maximizing λ² in the i-th class and minimizing the trace, determinant and largest eigenvalue of a defined covariance matrix, i =1,…,4, are determined.     

Optimal designs for asymmetrical factorial paired comparison experiments

Three forms of a general null hypothesis Ho on the factorial parameters of a general asymmetrical factorial paired comparison experiment are considered. A class of partially balanced designscorresponding to each form of H₀ is constructed and the A,D and ioptimal design, minimizing the trace, determinant and largest eigenvalue of a defined covariance matrix of related maximumlikelihoodestimators, in that class is determined. Moreover, the optimal design in each class maximizes the noncentrality parameter λ² of the asymptotic noncentral chi-square distribution of the likelihood ratiostatistic -2 log λ for testing H_o under defined local alternatives. These results apply directly to symmetrical factorial paired comparison experiments as special casesExamples are given forillustrating applications of the developed results     

A lower bound to the measure of optimality for main effect plans in the general asymmetric factorial experiments

A design d is called D-optimal if it maximizes det(M _d ) and is called MS-optimal if it maximizes tr(M _d ) and minimizes tr[(M _d )²] among those which maximize tr(M _d ), where M _d stands for the information matrix produced from d under a given model. In this paper, we establish a lower bound for tr[(M _d )²] with respect to a main effects model, where d is an s ₁×s ₂×···×s _m levels asymmetric orthogonal array of strength at least 1. Nonisomorphic asymmetrical MS-optimal orthogonal arrays of strength 1 with N=6, 8 and 12 runs are also presented.     

Saturated main-effect designs for factorial experiments

The results of a computer search for saturated designs for 2ⁿ factorial experiments with n runs is reported, (where n = 2 mod 4). A complete search of the design space is avoided by focussing on designs constructed from cyclic generators. A method of searching quickly for the best generators is given. The resulting designs are as good as, and sometimes better than, designs obtained via search algorithms reported in the literature. The addition of a further factor having three levels is also considered. Here, too, a complete search is avoided by restricting attention to the most efficient part of the design space under p-efficiency.     

On sum composition of fractional factorial designs

Combinatorial extension and composition methods have been extensively used in the construction of block designs. One of the composition methods, namely the direct product or Kronecker product method was utilized by Chakravarti [1956] to produce certain types of fractional factorial designs. The present paper shows how the direct sum operation can be utilized in obtaining from initial fractional factorial designs for two separate symmetrical factorials a fractional factorial design for the corresponding asymmetrical factorial. Specifically, we provide some results which are useful in the construction of non-singular fractional factorial designs via the direct sum composition method. In addition a modified direct sum method is discussed and the consequences of imposing orthogonality are explored.     

Design two-level factorial experiments in blocks of size four

Recently, many researchers have devoted themselves to the investigation on the number of replicates needed for experiments in blocks of size two. In practice, experiments in blocks of size four might be more useful than those in blocks of size two. To estimate the main effects and two-factor interactions from a two-level factorial experiment in blocks, we might need many replicates. This article investigates designs with the least number of replicates for factorial experiments in blocks of size four. The methods to obtain such designs are presented.     

Chain pooling model selection for two-level fixed effects factorial experiments

As many as three iterated statistical model deletion procedures are considered for an experiment.Population model coeff cients were chosen to simulate a saturated 2⁴experiment having an unfavorable distribution of parameter values.Using random number studies, three model selection strategies were developed, namely, (1) a strategy to be used in anticipation of large coefficients of variation (neighborhood of 65 percent), (2) strategy to be used in anticipation of small coefficients of variation (4 percent or less), and (3) a security regret strategy to be used in the absence of such prior knowledge     

Minimum cost linear trend-free 12-run fractional factorial designs

Time trend resistant fractional factorial experiments have often been based on regular fractionated designs where several algorithms exist for sequencing their runs in minimum number of factor-level changes (i.e. minimum cost) such that main effects and/or two-factor interactions are orthogonal to and free from aliasing with the time trend, which may be present in the sequentially generated responses. On the other hand, only one algorithm exists for sequencing runs of the more economical non-regular fractional factorial experiments, namely Angelopoulos et al. [1 P. Angelopoulos, H. Evangelaras, and C. Koukouvinos, Run orders for efficient two-level experimental plans with minimum factor level changes robust to time trends, J. Statist. Plann. Inference 139 (2009), pp. 3718–3724. doi: 10.1016/j.jspi.2009.05.002[Crossref], [Web of Science ®] , [Google Scholar]]. This research studies sequential factorial experimentation under non-regular fractionated designs and constructs a catalog of 8 minimum cost linear trend-free 12-run designs (of resolution III) in 4 up to 11 two-level factors by applying the interactions-main effects assignment technique of Cheng and Jacroux [3 C.S. Cheng and M. Jacroux, The construction of trend-free run orders of two-level factorial designs, J. Amer. Statist. Assoc. 83 (1988), pp. 1152–1158. doi: 10.1080/01621459.1988.10478713[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]] on the standard 12-run Plackett–Burman design, where factor-level changes between runs are minimal and where main effects are orthogonal to the linear time trend. These eight 12-run designs are non-orthogonal but are more economical than the linear trend-free designs of Angelopoulos et al. [1 P. Angelopoulos, H. Evangelaras, and C. Koukouvinos, Run orders for efficient two-level experimental plans with minimum factor level changes robust to time trends, J. Statist. Plann. Inference 139 (2009), pp. 3718–3724. doi: 10.1016/j.jspi.2009.05.002[Crossref], [Web of Science ®] , [Google Scholar]], where they can accommodate larger number of two-level factors in smaller number of experimental runs. These non-regular designs are also more economical than many regular trend-free designs. The following will be provided for each proposed systematic design:

• (1) The run order in minimum number of factor-level changes.

• (2) The total number of factor-level changes between the 12 runs (i.e. the cost).

• (3) The closed-form least-squares contrast estimates for all main effects as well as their closed-form variance–covariance structure.

In addition, combined designs of each of these 8 designs that can be generated by either complete or partial foldover allow for the estimation of two-factor interactions involving one of the factors (i.e. the most influential).     

On Kronecker block designs for factorial experiments

In this paper the use of Kronecker designs for factorial experiments is considered. The two-factor Kronecker design is considered in some detail and the efficiency factors of the main effects and interaction in such a design are derived. It is shown that the efficiency factor of the interaction is at least as large as the product of the efficiency factors of the two main effects and when both the component designs are totally balanced then its efficiency factor will be higher than the efficiency factor of either of the two main effects. If the component designs are nearly balanced then its efficiency factor will be approximately at least as large as the efficiency factor of either of the two main effects. It is argued that these designs are particularly useful for factorial experiments.Extensions to the multi-factor design are given and it is proved that the two-factor Kronecker design will be connected if the component designs are connected.     

A cusum control chart approach for screening active effects in orthogonal-saturated experiments

The analysis of designs based on saturated orthogonal arrays poses a very difficult challenge since there are no degrees of freedom left to estimate the error variance. In this paper we propose a heuristic approach for the use of cumulative sum control chart for screening active effects in orthogonal-saturated experiments. A comparative simulation study establishes the powerfulness of the proposed method.     

Minimax designs for 2k factorial experiments for generalized linear models

ABSTRACT

Formulas for A- and C-optimal allocations for binary factorial experiments in the context of generalized linear models are derived. Since the optimal allocations depend on GLM weights, which often are unknown, a minimax strategy is considered. This is shown to be simple to apply to factorial experiments. Efficiency is used to evaluate the resulting design. In some cases, the minimax design equals the optimal design. For other cases no general conclusion can be drawn. An example of a two-factor logit model suggests that the minimax design performs well, and often better than a uniform allocation.     

Small orthogonal main effect plans with four factors

In this paper we study orthogonal main effect plans with four factors, A table of such designs, where each factor has at most 10 levels, and there are at most 40 runs, is generated. We determine the spectrum of the degrees of freedom of pure error for these designs.     

Determining the effects of intraclass correlation on factorial experiments

This paper considers the effects of the presence of eqmi-correlation between observations in a k-way factorial experiment, A technique to provide unbiased F-tests is also constructed.     

(M,S)-optimality in selecting factorial designs

Use of the (M,S) criterion to select and classify factorial designs is proposed and studied. The criterion is easy to deal with computationally and it is independent of the choice of treatment contrasts. It can be applied to two-level designs as well as multi-level symmetrical and asymmetrical designs. An important connection between the (M,S) and minimum aberration criteria is derived for regular fractional factorial designs. Relations between the (M,S) criterion and generalized minimum aberration criteria on nonregular designs are also discussed. The (M,S) criterion is then applied to study the projective properties of some nonregular designs.     

On the problem of augmented fractional factorial designs

Let D be a saturated fractional factorial design of the general K₁ x K₂ ...x K_t factorial such that it consists of m distinct treatment combinations and it is capable of providing an unbiased estimator of a subvector of m factorial parameters under the assumption that the remaining k-m,t (k = H it ) factorial parameters are negligible. Such a design will not provide an unbiased estimator of the varianceσ² Suppose that D is an optimal design with respect to some optimality criterion (e.g. d-optimality, a-optimality or e-optimality) and it is desirable to augment D with c treatmentcombinations with the aim to estimate ² Suppose that D is an optimal design with respect to some optimality criterion (e.g. d-optimality, a-optimality or e-optimality) and it is desirable to augment D with c treatment combinations with the aim to estimate σ² unbiasedly. The problem then is how to select the c treatment combinations such that the augmented design D retains its optimality property. This problem, in all its generality is extremely complex. The objective of this paper is to provide some insight in the problem by providing a partial answer in the case of the 2^tfactorial, using the d-optimality criterion.