Simultaneous Tolerance Limits and a Unified Approach to some Nonparametric Theory

In this paper nonparametric simultaneous tolerance limits are developed using rectangle probabilities for uniform order statistics. Consideration is given to the handling of censored data, and some comparisons are made with the parametric normal theory. The nonparametric regional estimation techniques of (i) confidence bands for a distribution function, (ii) simultaneous confidence intervals for quantiles and (iii) simultaneous tolerance limits are unified. A Bayesian approach is also discussed.     

Autocorrelation and tolerance limits

Tolerance limits are limits that include a specified proportion of the population at a given confidence level. They are used to make sure that the production will not be outside specifications. Tolerance limits are either designed based on the normality assumption, or nonparametric tolerance limits are established. In either case, no provision for autocorrelated processes is made in the available design tables of tolerance limits. It is shown how to construct tolerance limits to cover a specified proportion of the population when autocorrelation is present in the process. A comparison of four different tolerance limits is provided, and recommendations are given for choosing the "best" estimator of the process variability for the construction of tolerance limits.     

One-sided tolerance limits for a normal population based on censored samples

A procedure for constructing one-sided tolerance limits for a normal distribution which are based on a censored sample is given. The factors necessary for the calculation of such limits are also given for several different sample sizes     

Tolerance limits under Poisson regression based on small-sample asymptotic methodology

This article explores the calculation of tolerance limits for the Poisson regression model based on the profile likelihood methodology and small-sample asymptotic corrections to improve the coverage probability performance. The data consist of n counts, where the mean or expected rate depends upon covariates via the log regression function. This article evaluated upper tolerance limits as a function of covariates. The upper tolerance limits are obtained from upper confidence limits of the mean. To compute upper confidence limits the following methodologies were considered: likelihood based asymptotic methods, small-sample asymptotic methods to improve the likelihood based methodology, and the delta method. Two applications are discussed: one application relating to defects in semiconductor wafers due to plasma etching and the other examining the number of surface faults in upper seams of coal mines. All three methodologies are illustrated for the two applications.     

One-sided tolerance limits for unbalanced one-way anova andomc effects model

In this article, we investigate techniques for constructing tolerance limits such that the probability is γ that at least _p proportion of the population would exceed that limit. We consider the unbalanced case and study the behavior of the limit as a function of n_i 's (where n_i is the number of observations in the ith batch), as well as that of the variance ratio. To construct the tolerance limits we use the approximation given in Thomas and Hultquist (1978). We also discuss the procedure for constructing the tolerance limits when the variance ratio is unknown. An example is given to illustrate the results.     

The probabilistic tolerance design for a subsystem using taguchi's quadratic loss function

Taguchi (1984,1987) has derived tolerances for subsystems, subcomponents, parts and materials. However, he assumed that the relationship between a higher rank and a lower rank quality characteristic is deterministic. The basic structure of the above tolerance design problem is very similar to that of the screening problem. Tang (1987) proposed three cost models and derived an economic design for the screening problem of “the-bigger-the-better” quality characteristic in which the optimal specification limit ( or tolerance ) for a screening variable ( or a lower rank quality characteristic ) was obtained by minimizing the expected total cost function.Tang considered that the quality cost incurred only when the quality characteristic is out of specification while Taguchi considered that the quality cost incurred whenever the quality characteristic deviates from its nominal value. In this paper, a probabilistic relationship, namely, a bivariate normal distribution between the above two qualy characteristics as in a screening problem as well as Taguchi's quadratic loss function are considered together to develop a closed form solution of the tolerance design for a subsystem.     

One-sided Continuous Tolerance Limits and their Accompanying Sample Size Problem

Tolerance limits are those limits that contain a certain proportion of the distribution of a characteristic with a given probability. 'They are used to make sure that the production will not be outside of specifications' (Amin & Lee, 1999). Usually, tolerance limits are constructed at the beginning of the monitoring of the process. Since they are calculated just one time, these tolerance limits cannot reflect changes of tolerance level over the lifetime of the process. This research proposes an algorithm to construct tolerance limits continuously over time for any given distribution. This algorithm makes use of the exponentially weighted moving average (EWMA) technique. It can be observed that the sample size required by this method is reduced over time.     

应用Bootstrap模拟技术的VaR计算与分析研究

比较估计VaR的方差一协方差方法、历史模拟法和MonteCarlo模拟方法，提出估计VaR的新模型和新方法。新模型把随机收益率分解成刻画收益率二阶矩特征的部分和刻画随机均值的正态部分。新方法使用Bootstrap模拟技术和MonteCarlo模拟技术计算VaR。实证分析表明，新方法计算的VaR在传统方法计算的VaR参考范围内。     

Optimal Estimator for Logistic Model with Distribution‐free Random Intercept

Logistic models with a random intercept are prevalent in medical and social research where clustered and longitudinal data are often collected. Traditionally, the random intercept in these models is assumed to follow some parametric distribution such as the normal distribution. However, such an assumption inevitably raises concerns about model misspecification and misleading inference conclusions, especially when there is dependence between the random intercept and model covariates. To protect against such issues, we use a semiparametric approach to develop a computationally simple and consistent estimator where the random intercept is distribution‐free. The estimator is revealed to be optimal and achieve the efficiency bound without the need to postulate or estimate any latent variable distributions. We further characterize other general mixed models where such an optimal estimator exists.     

An error-bounded polynomial approximation for bivariate normal probabilities

Although the bivariate normal distribution is frequently employed in the development of screening models, the formulae for computing bivariate normal probabilities are quite complicated. A simple and accurate error-bounded, noniterative approximation for bivariate normal probabilities based on a simple univariate normal quadratic or cubic approximation is developed for use in screening applications. The approximation, which is most accurate for large absolute correlation coefficients, is especially suitable for screening applications (e.g., in quality control), where large absolute correlations between performance and screening variables are desired. A special approximation for conditional bivariate normal probabilities is also provided which in quality control screening applications improves the accuracy of estimating the average outgoing product quality. Some anomalies in computing conditional bivariate normal probabilities using BNRDF and NORDF in IMSL are also discussed.     

The effect of autocorrelation on the ewma maxmin tolerance limits

Amin et al. (1999) developed an exponentially weighted moving average (EWMA) control chart, based on the smallest and largest observations in each sample. The resulting plot of the extremes suggests that the MaxMin EWMA may also be viewed as smoothed tolerance limits. Tolerance limits are limits that include a specific proportion of the population at a given confidence level. In the context of process control, they are used to make sure that production will not be outside specifications. Amin and Li (2000) provided the coverages of the MaxMin EWMA tolerance limits for independent data. In this article, it is shown how autocorrelation affects the confidence level of MaxMin tolerance limits, for a specified level of coverage of the population, and modified smoothed tolerance limits are suggested for autocorrelated processes.     

On the assessment of tolerance limits under inverse gaussian distribution

Inverse Gaussian distribution has been used in a wide range of applications in modeling duration and failure phenomena. In these applications, one-sided lower tolerance limits are employed, for instance, for designing safety limits of medical devices. Tang and Chang (1994) proposed lowersided tolerance limits via Bonferroni inequality when parameters in the inverse Gaussian distribution are unknown. However, their simulation results showed conservative coverage probabilities, and consequently larger interval width. In their paper, they also proposed an alternative to construct lesser conservative limits. But simulation results yielded unsatisfactory coverage probabilities in many cases. In this article, the exact lower-sided tolerance limit is proposed. The proposed limit has a similar form to that of the confidence interval for mean under inverse Gaussian. The comparison between the proposed limit and Tang and Chang's method is compared via extensive Monte Carlo simulations. Simulation results suggest that the proposed limit is superior to Tang and Chang's method in terms of narrower interval width and approximate to nominal level of coverage probability. Similar argument can be applied to the formulation of two-sided tolerance limits. A summary and conclusion of the proposed limits is included.     

Simultaneous one-sided tolerance intervals for sets of contrasts from normal populations

This paper considers the problem of constructing simultaneous prediction and tolerance intervals for sets of contrasts of normal variables in situations where simultaneous intervals are available. Tables are given with critical values used in simultaneous tolerance bounds for two classes of contrasts: pairwise many-one and profile type.     

Nonparametric bayes estimates of estimable parameters with a dirichlet invarant process and inveriant u-statistics

Tne Bayes estimates of estimable parameters of arbitrary degree in the one sample case are obtained against a Dirichlet invariant. process prior and the squared error loss. We also oive the limits of Bayes estimates, which are related to the in- a- variant U-statistics. For a fixed distribution, the limits of Bayes estimates have the asymptotic normal distribution under certain conditjons.     

Bayesian X̄ control limits for exponentially distributed measurements

This article deals with the construction of an X? control chart using the Bayesian perspective. We obtain new control limits for the X? chart for exponentially distributed data-generating processes through the sequential use of Bayes’ theorem and credible intervals. Construction of the control chart is illustrated using a simulated data example. The performance of the proposed, standard, tolerance interval, exponential cumulative sum (CUSUM) and exponential exponentially weighted moving average (EWMA) control limits are examined and compared via a Monte Carlo simulation study. The proposed Bayesian control limits are found to perform better than standard, tolerance interval, exponential EWMA and exponential CUSUM control limits for exponentially distributed processes.     

Percentile bounds and tolerance limits for the birnbaum-saunders distribution

In this paper, a confidence interval for the lOOpth percentile of the Birnbaum-Saunders distribution is constructed. Conservative two-sided tolerance limits are then obtained from the confidence limits. These results are useful for reliability evaluation when using the Birnbaum-Saunders model. A simple scheme for generating Birnbaum-Saunders random variates is derived. This is used for a simulation study on investigating the effectiveness of the proposed confidence interval in terms of its coverage probability.     

Computing factors for exact two-sided tolerance limits for a normal distribution

A self-contained FORTRAN subroutine is provided which computes factors for Wald-Wolfowitz type tolerance limits allowing arbitrary combinations of sample size n and degrees of freedom ν. The exact calculations from our program reveal inadequacies of two existing approximations, especially when ν ? n. Numerous applications where ν ≠ n ? 1 are cited; two of these are discussed and illustrated.     

Inference for a Linear Functional of Cumulative Hazard Function Via Empirical Likelihood

This article discusses sampling plans, that is, the allocation of sampling units, for computing tolerance limits in a balanced one--way random-effects model. The expected width of the tolerance interval is derived and used as the basis for comparing different sampling plans. A well-known cost function and examples are used to facilitate the discussion.     

Tables of confidence limits on the tail area of the normal distribution

Tables are given of confidence limits on tail areas, γ, of the normal distribution, where γ = P{Y ≥ L}, and where L is a given number, and Y is normally distributed with unknown mean, μ, and unknown variance, σ².