Time truncated attribute control chart for the Weibull distribution using multiple dependent state sampling

In this article, an attribute control chart is proposed for time truncated tests using the Weibull distribution. The design of proposed control chart is presented using the multiple dependent state (MDS) sampling. The control chart coefficients are determined for various specified average run length. The efficiency of the proposed control chart is elaborated with the help of a simulation data and a real data. The proposed control chart perform better than the existing control chart in terms of average run length.     

Design of an attribute np control chart for process monitoring based on repetitive group sampling under truncated life tests

In this paper, an attribute control chart under repetitive group sampling is designed for monitoring the production process where the lifetime of the product is considered as quality of the product. We assume that the lifetime follows the Pareto distribution of second kind with known shape parameter. The performance of the proposed chart is evaluated by average run length. The control limits coefficients as well as the repetitive group sampling parameter such as sample size are determined such that the in-control average run length is as close as to the specified average run length. Out-of-control average run length is also reported for different shift constants with corresponding optimal parameters. In addition, performance of proposed control chart is compared with the performance of existing chart. An economical designing of proposed control chart is also discussed.     

Improving the performance of the zone control chart

A general model for the zone control chart is presented. Using this model, it is shown that there are score vectors for zone control charts which result in superior average run length performance in comparison to Shewhart charts with common runs rules.

A fast initial response (FIR) feature for the zone control chart is also proposed. Average run lengths of the zone control chart with this feature are calculated. It is shown that the FIR feature improves zone control chart performance by providing significantly earlier signals when the process is out of control.     

The extended GWMA control chart

This study extends the generally weighted moving average (GWMA) control chart by imitating the double exponentially weighted moving average (DEWMA) technique. The proposed chart is called the double generally weighted moving average (DGWMA) control chart. Simulation is employed to evaluate the average run length characteristics of the GWMA, DEWMA and DGWMA control charts. An extensive comparison of these control charts reveals that the DGWMA control chart with time-varying control limits is more sensitive than the GWMA and the DEWMA control charts for detecting medium shifts in the mean of a process when the shifts are between 0.5 and 1.5 standard deviations. Additionally, the GWMA control chart performs better when the mean shifts are below the 0.5 standard deviation, and the DEWMA control performs better when the mean shifts are above the 1.5 standard deviation. The design of the DGWMA control chart is also discussed.     

New V control chart for the Maxwell distribution

Control charts have been popularly used as a user-friendly yet technically sophisticated tool to monitor whether a process is in statistical control or not. These charts are basically constructed under the normality assumption. But in many practical situations in real life this normality assumption may be violated. One such non-normal situation is to monitor the process variability from a skewed parent distribution where we propose the use of a Maxwell control chart. We introduce a pivotal quantity for the scale parameter of the Maxwell distribution which follows a gamma distribution. Probability limits and L-sigma limits are studied along with performance measure based on average run length and power curve. To avoid the complexity of future calculations for practitioners, factors for constructing control chart for monitoring the Maxwell parameter are given for different sample sizes and for different false alarm rate. We also provide simulated data to illustrate the Maxwell control chart. Finally, a real life example has been given to show the importance of such a control chart.     

Performance of the zone control chart

Average run lengths of the zone control chart are presented, The performance of this chart is compared with that of several Shewhart charts with and without runs rules, It is shown that the standard zone control chart has performance similar to some even simpler charts and a much higher false alarm rate than the Shewhart chart with all of the common runs rules. It is also shown that a slightly modified zone control chart outperforms the Shewhart chart with the common runs rules.     

The economic design of multivariate binomial EWMA VSSI control charts

Since multi-attribute control charts have received little attention compared with multivariate variable control charts, this research is concerned with developing a new methodology to employ the multivariate exponentially weighted moving average (MEWMA) charts for m-attribute binomial processes; the attributes being the number of nonconforming items. Moreover, since the variable sample size and sampling interval (VSSI) MEWMA charts detect small process mean shifts faster than the traditional MEWMA, an economic design of the VSSI MEWMA chart is proposed to obtain the optimum design parameters of the chart. The sample size, the sampling interval, and the warning/action limit coefficients are obtained using a genetic algorithm such that the expected total cost per hour is minimized. At the end, a sensitivity analysis has been carried out to investigate the effects of the cost and the model parameters on the solution of the economic design of the VSSI MEWMA chart.     

A synthetic control chart for monitoring the small shifts in a process mean based on an attribute inspection

Abstract

In this paper, a synthetic control chart is proposed by integrating the salient features of the np_x chart and the CRL chart. The synthetic chart achieves higher detection effectiveness on both small and large mean shifts while retaining the operational simplicity of the attribute charts owing to only using attribute inspection. Both statistical and economic design of the synthetic chart are considered and numerical tests have indicated that the synthetic chart has a higher power for detecting mean shifts than the np_x chart, MON chart and CUSUM chart. In addition, sensitivity analyses are also performed under both the statistical and economic design model.     

A control chart for multivariate Poisson distribution using repetitive sampling

Control charts using repetitive group sampling have attracted a great deal of attention during the last few years. In the present article, we attempt to develop a control chart for the multivariate Poisson distribution using the repetitive group sampling scheme. In the proposed control chart, the monitoring statistic from the multivariate Poisson distribution has been used for the quick detection of the deteriorated process to avoid losses. The control coefficients have been estimated using the specified in-control average run lengths. The procedure of the proposed control chart has been explained by using the real-world example and a simulated data set. It has been observed that the proposed control chart is an efficient development for the quick detection of the nonrandom change in the manufacturing process.     

The effect of Phase I sample size on the run length performance of control charts for autocorrelated data

Traditional control charts assume independence of observations obtained from the monitored process. However, if the observations are autocorrelated, these charts often do not perform as intended by the design requirements. Recently, several control charts have been proposed to deal with autocorrelated observations. The residual chart, modified Shewhart chart, EWMAST chart, and ARMA chart are such charts widely used for monitoring the occurrence of assignable causes in a process when the process exhibits inherent autocorrelation. Besides autocorrelation, one other issue is the unknown values of true process parameters to be used in the control chart design, which are often estimated from a reference sample of in-control observations. Performances of the above-mentioned control charts for autocorrelated processes are significantly affected by the sample size used in a Phase I study to estimate the control chart parameters. In this study, we investigate the effect of Phase I sample size on the run length performance of these four charts for monitoring the changes in the mean of an autocorrelated process, namely an AR(1) process. A discussion of the practical implications of the results and suggestions on the sample size requirements for effective process monitoring are provided.     

The double sampling S2 chart with estimated process variance

This paper proposes useful exact bounds for the parameters of the double sampling S² chart with known process variance and it also investigates the properties of the double sampling S² chart with estimated process variance, in terms of the average run length, the standard deviation of the run length and the average sample size, providing a numerical comparison with the known process variance case. It also provides guidelines to systematically design the double sampling S² chart both with known and estimated process variance and proposes two optimal design procedures with estimated process variance, for (a) minimizing the out-of-control average run length and (b) minimizing the out-of-control average sample size.     

Ewma control chart under linear drift

An accurate numerical procedure is presented for computing the average run length (ARL) of an exponentially weighted moving average (EWMA) chart under a linear drift in the process mean. The performance of an EWMA chart is then evaluated under a linear drift in the mean. In processes where gradual linear drifts rather than abrupt changes in the mean model the shifts in the mean more accurately, an evaluation of the performance of an EWMA chart under a linear drift is more appropriate. Tables of optimal smoothing parameters and control chart limits are given which make the design of EWMA charts easy.     

Economic and economic statistical design of T 2 control chart with two adaptive sample sizes

The Hotelling's T ² control chart, a direct analogue of the univariate Shewhart X¯ chart, is perhaps the most commonly used tool in industry for simultaneous monitoring of several quality characteristics. Recent studies have shown that using variable sampling size (VSS) schemes results in charts with more statistical power when detecting small to moderate shifts in the process mean vector. In this paper, we build a cost model of a VSS T ² control chart for the economic and economic statistical design using the general model of Lorenzen and Vance [The economic design of control charts: A unified approach, Technometrics 28 (1986), pp. 3–11]. We optimize this model using a genetic algorithm approach. We also study the effects of the costs and operating parameters on the VSS T ² parameters, and show, through an example, the advantage of economic design over statistical design for VSS T ² charts, and measure the economic advantage of VSS sampling versus fixed sample size sampling.     

Effects of autocorrelation on control chart performance

In this article, we study the capability of the standard control chart for individual observations with fixed control limits to identify special causes reflected as isolated extreme points in the presence of autocorrelation. We consider both the application of standard Shewhart limits and moving-range limits and derive the risks of false positive and false negative when the control chart observations follow a general ARMA(p,q) process.     

A side sensitive modified group runs control chart to detect shifts in the process mean

Gadre and Rattihalli [5 Gadre, M. P. and Rattihalli, R. N. 2006. Modified group runs control charts to detect increases in fraction non-conforming and shifts in the process mean. Commun. Stat. Simul. Comput., 35: 225–240. [Taylor & Francis Online], [Web of Science ®] [Google Scholar]] have introduced the Modified Group Runs (MGR) control chart to identify the increases in fraction non-conforming and to detect shifts in the process mean. The MGR chart reduces the out-of-control average time-to-signal (ATS), as compared with most of the well-known control charts. In this article, we develop the Side Sensitive Modified Group Runs (SSMGR) chart to detect shifts in the process mean. With the help of numerical examples, it is illustrated that the SSMGR chart performs better than the Shewhart's X¯ chart, the synthetic chart [12 Wu, Z. and Spedding, T. A. 2000. A synthetic control chart for detecting small shifts in the process mean. J. Qual. Technol., 32: 32–38. [Taylor & Francis Online], [Web of Science ®] [Google Scholar]], the Group Runs chart [4 Gadre, M. P. and Rattihalli, R. N. 2004. A group runs control chart for detecting shifts in the process mean. Econ. Qual. Control, 19: 29–43. [Crossref] [Google Scholar]], the Side Sensitive Group Runs chart [6 Gadre, M. P. and Rattihalli, R. N. 2007. A side sensitive group runs control chart for detecting shifts in the process mean. Stat. Methods Appl., 16: 27–37. [Crossref], [Web of Science ®] [Google Scholar]], as well as the MGR chart [5 Gadre, M. P. and Rattihalli, R. N. 2006. Modified group runs control charts to detect increases in fraction non-conforming and shifts in the process mean. Commun. Stat. Simul. Comput., 35: 225–240. [Taylor & Francis Online], [Web of Science ®] [Google Scholar]]. In some situations it is also superior to the Cumulative Sum chart p9 Page, E. S. 1954. Continuous inspection schemes. Biometrika, 41: 100–114. [Crossref], [Web of Science ®] [Google Scholar]] and the exponentially weighed moving average chart [10 Roberts, S. W. 1959. Control chart tests based on geometric moving averages. Technometrics, 1: 239–250. [Taylor & Francis Online] [Google Scholar]]. In the steady state also, its performance is better than the above charts.     

Monitoring the coefficient of variation using a variable sample size and sampling interval control chart

This article proposes a CV chart by using the variable sample size and sampling interval (VSSI) feature to improve the performance of the basic CV chart, for detecting small and moderate shifts in the CV. The proposed VSSI CV chart is designed by allowing the sample size and the sampling interval to vary. The VSSI CV chart's statistical performance is measured by using the average time to signal (ATS) and expected average time to signal (EATS) criteria and is compared with that of existing CV charts. The Markov chain approach is employed in the design of the chart.     

Monitoring of zero-inflated binomial processes with a DEWMA control chart

Control charts are widely used for monitoring quality characteristics of high-yield processes. In such processes where a large number of zero observations exists in count data, the zero-inflated binomial (ZIB) models are more appropriate than the ordinary binomial models. In ZIB models, random shocks occur with probability θ, and upon the occurrence of random shocks, the number of non-conforming items in a sample of size n follows the binomial distribution with proportion p. In the present article, we study in more detail the exponentially weighted moving average control chart based on ZIB distribution (ZIB-EWMA) and we also propose a new control chart based on the double exponentially weighted moving average statistic for monitoring ZIB data (ZIB-DEWMA). The two control charts are studied in detecting upward shifts in θ or p individually, as well as in both parameters simultaneously. Through a simulation study, we compare the performance of the proposed chart with the ZIB-Shewhart, ZIB-EWMA and ZIB-CUSUM charts. Finally, an illustrative example is also presented to display the practical application of the ZIB charts.