Improved robust ridge M-estimation

It is developed that non-sample prior information about regression vector-parameter, usually in the form of constraints, improves the risk performance of the ordinary least squares estimator (OLSE) when it is shrunken. However, in practice, it may happen that both multicollinearity and outliers exist simultaneously in the data. In such a situation, the use of robust ridge estimator is suggested to overcome the undesirable effects of the OLSE. In this article, some prior information in the form of constraints is employed to improve the performance of this estimator in the multiple regression model. In this regard, shrinkage ridge robust estimators are defined. Advantages of the proposed estimators over the usual robust ridge estimator are also investigated using Monte-Carlo simulation as well as a real data example.     

Good ridge estimators based on prior information

Ridge regression is re-examined and ridge estimators based on prior information are introduced. A necessary and sufficient condition is given for such ridge estimators to yield estimators of every nonnull linear combination of the regression coefficients with smaller mean square error than that of the Gauss-Markov best linear unbiased estimator.     

Bayesian Tobit quantile regression using g-prior distribution with ridge parameter

A Bayesian approach is proposed for coefficient estimation in the Tobit quantile regression model. The proposed approach is based on placing a g-prior distribution depends on the quantile level on the regression coefficients. The prior is generalized by introducing a ridge parameter to address important challenges that may arise with censored data, such as multicollinearity and overfitting problems. Then, a stochastic search variable selection approach is proposed for Tobit quantile regression model based on g-prior. An expression for the hyperparameter g is proposed to calibrate the modified g-prior with a ridge parameter to the corresponding g-prior. Some possible extensions of the proposed approach are discussed, including the continuous and binary responses in quantile regression. The methods are illustrated using several simulation studies and a microarray study. The simulation studies and the microarray study indicate that the proposed approach performs well.     

Two methods of evaluating hoerl and kennard's ridge regression

We formulate a modified version of the Hoerl-Kennard ridge regression method to solve the problem of estimating coefficients in economic relationships. We investigate two approaches for determining the biasing parameter One approach utilizes prior information in choosing jr, the other approach estimates y from the sample data. Monte Carlo experiments are used to evaluate the relative efficiencies of alternative ridge estimators.     

Adaptation of the jackknifed ridge methods to the linear mixed models

The purpose of this article is to obtain the jackknifed ridge predictors in the linear mixed models and to examine the superiorities, the linear combinations of the jackknifed ridge predictors over the ridge, principal components regression, r?k class and Henderson's predictors in terms of bias, covariance matrix and mean square error criteria. Numerical analyses are considered to illustrate the findings and a simulation study is conducted to see the performance of the jackknifed ridge predictors.     

Robust two parameter ridge M-estimator for linear regression

The problem of multicollinearity and outliers in the data set produce undesirable effects on the ordinary least squares estimator. Therefore, robust two parameter ridge estimation based on M-estimator (ME) is introduced to deal with multicollinearity and outliers in the y-direction. The proposed estimator outperforms ME, two parameter ridge estimator and robust ridge M-estimator according to mean square error criterion. Moreover, a numerical example and a Monte Carlo simulation experiment are presented.     

Generalized ridge regression and a generalization of the CP statistic

We consider a generalization of ridge regression and demonstrate advantages over ridge regression. We provide an empirical Bayes method for determining the ridge constants, using the Bayesian interpretation of ridge estimators, and show that this coincides with a method based on a generalization of the C_P statistic and the non-negative garrote. These provide an automatic variable selection procedure for the canonical variables.     

Some finite sample properties of generalized ridge regression estimators

In this paper we study the mean square error properties of the generalized ridge estimator. We obtain the exact and the approximate bias and the mean square error of the operational generalized ridge estimator in terms of G( ) functions. We show, among other things, that the operational generalized ridge estimator does not dominate the ordinary least squares estimator up to a certain order of approximation. Finally, we note that the iterative procedures to obtain coverging ridge estimators should be used with caution.     

Collinearity: revisiting the variance inflation factor in ridge regression

Ridge regression has been widely applied to estimate under collinearity by defining a class of estimators that are dependent on the parameter k. The variance inflation factor (VIF) is applied to detect the presence of collinearity and also as an objective method to obtain the value of k in ridge regression. Contrarily to the definition of the VIF, the expressions traditionally applied in ridge regression do not necessarily lead to values of VIFs equal to or greater than 1. This work presents an alternative expression to calculate the VIF in ridge regression that satisfies the aforementioned condition and also presents other interesting properties.     

Robust ridge and robust Liu estimator for regression based on the LTS estimator

In the multiple linear regression analysis, the ridge regression estimator and the Liu estimator are often used to address multicollinearity. Besides multicollinearity, outliers are also a problem in the multiple linear regression analysis. We propose new biased estimators based on the least trimmed squares (LTS) ridge estimator and the LTS Liu estimator in the case of the presence of both outliers and multicollinearity. For this purpose, a simulation study is conducted in order to see the difference between the robust ridge estimator and the robust Liu estimator in terms of their effectiveness; the mean square error. In our simulations, the behavior of the new biased estimators is examined for types of outliers: X-space outlier, Y-space outlier, and X-and Y-space outlier. The results for a number of different illustrative cases are presented. This paper also provides the results for the robust ridge regression and robust Liu estimators based on a real-life data set combining the problem of multicollinearity and outliers.     

Positive-rule stein-type almost unbiased ridge estimator in linear regression model

Abstract

In this article, when it is suspected that regression coefficients may be restricted to a subspace, we discuss the parameter estimation of regression coefficients in a multiple regression model. Then, in order to improve the preliminary test almost ridge estimator, we study the positive-rule Stein-type almost unbiased ridge estimator based on the positive-rule stein-type shrinkage estimator and almost unbiased ridge estimator. After that, quadratic bias and quadratic risk values of the new estimator are derived and compared with some relative estimators. And we also discuss the option of parameter k. Finally, we perform a real data example and a Monte Carlo study to illustrate theoretical results.     

Tests of regression coefficients under ridge regression models

This paper investigates two “non-exact” t-type tests, t( k₂) and t(k₂), of the individual coefficients of a linear regression model, based on two ordinary ridge estimators. The reported results are built on a simulation study covering 84 different models. For models with large standard errors, the ridge-based t-tests have correct levels with considerable gain in powers over those of the least squares t-test, t(0). For models with small standard errors, t(k₁) is found to be liberal and is not safe to use while, t(k₂) is found to slightly exceed the nominal level in few cases. When tie two ridge tests art: not winners, the results indicate that they don't loose much against t(0).     

Implementation of ridge analysis on quadratic response surfaces

A computer program that performs ridge analysis on quadratic response surfaces is presented in this paper, the primary goal of which is to seek the estimated optimum operating conditions inside a spherical region of experimentation during the stage of process optimization. The computational algorithm is developed based upon the trust-region methods in nonlinear optimization and guarantees the resulting operating conditions to be globally optimal without any priori assumption on the structure of response functions. Under a particular condition termed the "hard case" arising from the trust region literature, the conventional ridge analysis procedure fails to provide a set of acceptable optimum operating settings, yet the proposed algorithm has the capability of locating a pair of non-unique global solutions achieved on an identical estimated response value. Two illustrative examples taken from the response surface methodology (RSM) literature are given to demonstrate the effectiveness and efficiency of the method addressed in the paper.     

Some ridge regression estimators for the zero-inflated Poisson model

The zero-inflated Poisson regression model is commonly used when analyzing economic data that come in the form of non-negative integers since it accounts for excess zeros and overdispersion of the dependent variable. However, a problem often encountered when analyzing economic data that has not been addressed for this model is multicollinearity. This paper proposes ridge regression (RR) estimators and some methods for estimating the ridge parameter k for a non-negative model. A simulation study has been conducted to compare the performance of the estimators. Both mean squared error and mean absolute error are considered as the performance criteria. The simulation study shows that some estimators are better than the commonly used maximum-likelihood estimator and some other RR estimators. Based on the simulation study and an empirical application, some useful estimators are recommended for practitioners.     

Difference-based ridge estimator of parameters in partial linear model

The paper introduces a new difference-based ridge regression estimator [^(b)](k){\hat{\beta}(k)} of the regression parameters β in the partial linear model. Its mean-squared error is compared analytically with the non-ridge version [^(b)](0){\hat{\beta}(0)} . Finally, the performance of the new estimator is evaluated for a real data set.     

Simulation study of new estimators combining the SUR ridge regression and the restricted least squares methodologies

In this paper, we propose two SUR type estimators based on combining the SUR ridge regression and the restricted least squares methods. In the sequel these estimators are designated as the restricted ridge Liu estimator and the restricted ridge HK estimator (see Liu in Commun Statist Thoery Methods 22(2):393–402, 1993; Sarkar in Commun Statist A 21:1987–2000, 1992). The study has been made using Monte Carlo techniques, (1,000 replications), under certain conditions where a number of factors that may effect their performance have been varied. The performance of the proposed and some of the existing estimators are evaluated by means of the TMSE and the PR criteria. Our results indicate that the proposed SUR restricted ridge estimators based on K _SUR, K _Sratio, K _Mratio and [(K)\ddot]{\ddot{K}} produced smaller TMSE and/or PR values than the remaining estimators. In contrast with other ridge estimators, components of [(K)\ddot]{\ddot{K}} are defined in terms of the eigenvalues of X^*￠ X^*{X^{{\ast^{\prime}}} X^{\rm \ast}} and all lie in the open interval (0, 1).     

Inverse regression for ridge recovery: a data-driven approach for parameter reduction in computer experiments

Parameter reduction can enable otherwise infeasible design and uncertainty studies with modern computational science models that contain several input parameters. In statistical regression, techniques for sufficient dimension reduction (SDR) use data to reduce the predictor dimension of a regression problem. A computational scientist hoping to use SDR for parameter reduction encounters a problem: a computer prediction is best represented by a deterministic function of the inputs, so data comprised of computer simulation queries fail to satisfy the SDR assumptions. To address this problem, we interpret SDR methods sliced inverse regression (SIR) and sliced average variance estimation (SAVE) as estimating the directions of a ridge function, which is a composition of a low-dimensional linear transformation with a nonlinear function. Within this interpretation, SIR and SAVE estimate matrices of integrals whose column spaces are contained in the ridge directions’ span; we analyze and numerically verify convergence of these column spaces as the number of computer model queries increases. Moreover, we show example functions that are not ridge functions but whose inverse conditional moment matrices are low-rank. Consequently, the computational scientist should beware when using SIR and SAVE for parameter reduction, since SIR and SAVE may mistakenly suggest that truly important directions are unimportant.

     

Variable selection in linear regression based on ridge estimator

In this article, we consider the problem of variable selection in linear regression when multicollinearity is present in the data. It is well known that in the presence of multicollinearity, performance of least square (LS) estimator of regression parameters is not satisfactory. Consequently, subset selection methods, such as Mallow's Cp, which are based on LS estimates lead to selection of inadequate subsets. To overcome the problem of multicollinearity in subset selection, a new subset selection algorithm based on the ridge estimator is proposed. It is shown that the new algorithm is a better alternative to Mallow's Cp when the data exhibit multicollinearity.     

On ridge parameter estimators under stochastic subspace hypothesis

This paper considers several estimators for estimating the restricted ridge parameter estimators. A simulation study has been conducted to compare the performance of these estimators. Based on the simulation study we found that, increasing the correlation between the independent variables has positive effect on the mean square error (MSE). However, increasing the value of ρ has negative effect on MSE. When the sample size increases, the MSE decreases even when the correlation between the independent variables is large. Two real life examples have been considered to illustrate the performance of the estimators.     

Fordham symposium on ridge regression:introduction

The symposium was held on July 26 and 27, 1983 at the scenic top floor Faculty Lounge of the Leon Lowenstein Center, a part of the Lincoln Center campus of Fordham University in New York. It was attended by about forty people from all over, as represented by the affiliations of the authors. This issue of Communications in Statisticsis devoted to the Fordham symposium. This introduction is limited to an overview with highlights, since abstracts accompany the papers.

The “call for papers” issued in November 1982 indicated that ridge methods and multicollinearity problems would be the main theme, and that both methodological and applied papers will be included.