Bayes estimation of Moran–Downton bivariate exponential distribution based on censored samples

In this paper, we discuss a Bayesian estimation procedure for the parameters in a Moran–Downton bivariate exponential distribution based on complete and censored samples. A Markov-chain Monte Carlo method is used to obtain the Bayes estimates of the parameters. An intensive simulation experiment is conducted to study the performance of the proposed Bayesian estimation procedure. Discussions and suggestions are provided based on the simulation results. A numerical example is presented to illustrate the Bayesian estimation procedure developed here and some concluding remarks are provided.     

Estimation of P{X < Y} for geometric—exponential model based on complete and censored samples

This article deals with the estimation of R = P{X < Y}, where X and Y are independent random variables from geometric and exponential distribution, respectively. For complete samples, the MLE of R, its asymptotic distribution, and confidence interval based on it are obtained. The procedure for deriving bootstrap-p confidence interval is presented. The UMVUE of R and UMVUE of its variance are derived. The Bayes estimator of R is investigated and its Lindley's approximation is obtained. A simulation study is performed in order to compare these estimators. Finally, all point estimators for right censored sample from the exponential distribution, are obtained.     

On the existence and uniqueness of the maximum likelihood estimates of the parameters of Birnbaum–Saunders distribution based on Type-I,Type-II and hybrid censored samples

The Birnbaum–Saunders (BS) distribution is a positively skewed distribution and is a common model for analysing lifetime data. In this paper, we discuss the existence and uniqueness of the maximum likelihood estimates (MLEs) of the parameters of BS distribution based on Type-I, Type-II and hybrid censored samples. The line of proof is based on the monotonicity property of the likelihood function. We then describe the numerical iterative procedure for determining the MLEs of the parameters, and point out briefly some recently developed simple methods of estimation in the case of Type-II censoring. Some graphical illustrations of the approach are given for three real data from the reliability literature. Finally, for illustrative purpose, we also present an example in which the MLEs do not exist.     

A test for suitability of the preliminary samples for constructing control limits of X¯ chart

Unless the preliminary m subgroups of small samples are drawn from a stable process, the estimated control limits of X¯ chart in phase I can be erroneous, due to which the performance of the chart in phase II can be significantly affected. In this work, a quantitative approach based on extraction of the shape features of control chart patterns in the X¯ chart is proposed for evaluating the stability of the process mean, while the preliminary samples were drawn and thus, the subjectivity associated with the visual analysis of the patterns is eliminated. The effectiveness of the test procedure is evaluated using simulated data. The results show that the proposed approach can be very effective for m≥48. The power of the test can be improved by identifying a new feature that can more efficiently discriminate the cyclic pattern of smaller periodicity from the natural pattern and by redefining the test statistic.     

A powerful and interpretable alternative to the Jarque–Bera test of normality based on 2nd-power skewness and kurtosis,using the Rao's score test on the APD family

We introduce the 2nd-power skewness and kurtosis, which are interesting alternatives to the classical Pearson's skewness and kurtosis, called 3rd-power skewness and 4th-power kurtosis in our terminology. We use the sample 2nd-power skewness and kurtosis to build a powerful test of normality. This test can also be derived as Rao's score test on the asymmetric power distribution, which combines the large range of exponential tail behavior provided by the exponential power distribution family with various levels of asymmetry. We find that our test statistic is asymptotically chi-squared distributed. We also propose a modified test statistic, for which we show numerically that the distribution can be approximated for finite sample sizes with very high precision by a chi-square. Similarly, we propose a directional test based on sample 2nd-power kurtosis only, for the situations where the true distribution is known to be symmetric. Our tests are very similar in spirit to the famous Jarque–Bera test, and as such are also locally optimal. They offer the same nice interpretation, with in addition the gold standard power of the regression and correlation tests. An extensive empirical power analysis is performed, which shows that our tests are among the most powerful normality tests. Our test is implemented in an R package called PoweR.     

The simplicity of likelihood based inferences for P(X < Y) and for the ratio of means in the exponential model

The profile likelihood of the reliability parameter θ = P(X < Y) or of the ratio of means, when X and Y are independent exponential random variables, has a simple analytical expression and is a powerful tool for making inferences. Inferences about θ can be given in terms of likelihood-confidence intervals with a simple algebraic structure even for small and unequal samples. The case of right censored data can also be handled in a simple way. This is in marked contrast with the complicated expressions that depend on cumbersome numerical calculations of multidimensional integrals required to obtain asymptotic confidence intervals that have been traditionally presented in scientific literature.     

A note on the equality of the OLSE and the BLUE of the parametric function in the general Gauss–Markov model

In this note we consider the equality of the ordinary least squares estimator (OLSE) and the best linear unbiased estimator (BLUE) of the estimable parametric function in the general Gauss–Markov model. Especially we consider the structures of the covariance matrix V for which the OLSE equals the BLUE. Our results are based on the properties of a particular reparametrized version of the original Gauss–Markov model.      

A network algorithm for the exact treatment of the 2×k contingency table

A common statistical problem encountered in biomedical research is to test the hypothesis that the parameters of k binomial populations are all equal. An exact test of significance of this hypothesis is possible in principle, the appropriate null distribution being a normalized product of k binomial coefficients. However, the problem of computing the tail area of this distribution can be formidable since it requires the enumeration of all sets of k binomial coefficients whose product is less than a given constant. Existing algorithms, all of which rely on explicit enumeration to generate feasible binomial coefficients     

Estimation of δ=P(X<Y) for Burr XII distribution based on the progressively first failure-censored samples

Let X and Y have two-parameter Burr XII distributions. The maximum-likelihood estimator of δ=P(X<Y) is studied under the progressively first failure-censored samples. Three confidence intervals of δ are constructed by using an asymptotic distribution of the maximum-likelihood estimator of δ and two bootstrapping procedures, respectively. Some computational results from intensive simulations are presented. An illustrative example is provided to demonstrate the application of the proposed method.     

Tests of significance for the odds ratio in a 2×2 table based on the ratio of two independent F-variates

Following Gart (1966) a test of significance for the odds ratio in a 2×2 table is developed based on a semi-empirical method of approximating discrete distributions by their continuous analogues. The distribution of the test statistic (W), the ratio of two independent F-variates, is derived. This approximate technique is compared with the "exact" test, uncorrected X test, and a normal approximation based on lnW.     

A simple condition for the multivariate CLT and the attraction to the Gaussian of Lévy processes at long and short times

We show that a necessary and sufficient condition for the sum of iid random vectors to converge (under appropriate centering and scaling) to a multivariate Gaussian distribution is that the truncated second moment matrix is slowly varying at infinity. This is more natural than the standard conditions, and allows for the possibility that the limiting Gaussian distribution is degenerate (so long as it is not concentrated at a point). We also give necessary and sufficient conditions for a d-dimensional Lévy process to converge (under appropriate centering and scaling) to a multivariate Gaussian distribution as time approaches zero or infinity.     

A Note on the Lower Bounds on Maximum Number of Clear Two-Factor Interactions for (2 m−p III) and (2 m−p IV) Designs

ABSTRACT

In the reliability analysis of mechanical repairable equipment subjected to reliability deterioration with operating time, two forms of the non-homogeneous Poisson processes, namely the Power-Law (PL) and the Log-Linear (LL) model, have found general acceptance in the literature. Inferential procedures, conditioned on the assumption of the PL or LL model, underestimate the overall uncertainty about a quantity of interest because the PL and LL models can provide different estimates of the quantity of interest, even when both of them adequately fit the observed data. In this paper, a composite estimation procedure, which uses the PL and LL models as competing models, is proposed in the framework of Bayesian statistics, thus allowing the uncertainty involved in model selection to be considered. A model-free approach is then proposed for incorporating technical information on the failure mechanism into the inferential procedure. Such an approach, which is based on two model-free quantities defined irrespectively of the functional form of the failure model, prevents that the prior information on the failure mechanism can improperly introduce prior probabilities on the adequacy of each model to fit the observed data. Finally, numerical applications are provided to illustrate the proposed procedures.     

A note on the mean past and the mean residual life of a (n − k + 1)-out-of-n system under multi monitoring

In the study of the reliability of technical systems, k-out-of-n systems play an important role. In the present paper, we consider a (n − k + 1)-out-of-n system consisting of n identical components such that the lifetimes of components are independent and have a common distribution function F. It is assumed that the number of monitoring is l and the total number of failures of the components at time t _i is m _i , i = 1, . . . , l − 1. Also at time t _l (t ₁ < . . . < t _l ) the system have failed or the system is still working. Under these conditions, the mean past lifetime, the mean residual lifetime of system and their properties are investigated.     

A Cautionary Note on the Use of the Grønnesby and Borgan Goodness-of-Fit Test for the Cox Proportional Hazards Model

Grønnesby and Borgan (1996, Lifetime Data Analysis 2, 315–328) propose an omnibus goodness-of-fit test for the Cox proportional hazards model. The test is based on grouping the subjects by their estimated risk score and comparing the number of observed and a model based estimated number of expected events within each group. We show, using extensive simulations, that even for moderate sample sizes the choice of number of groups is critical for the test to attain the specified size. In light of these results we suggest a grouping strategy under which the test attains the correct size even for small samples. The power of the test statistic seems to be acceptable when compared to other goodness-of-fit tests.     

Construction and selection of tightened–normal–tightened variables sampling scheme of type TNTVSS (n 1, n 2; k)

This paper provides tables for the construction and selection of tightened–normal–tightened variables sampling scheme of type TNTVSS (n ₁, n ₂; k). The method of designing the scheme indexed by (AQL, α) and (LQL, β) is indicated. The TNTVSS (n _T , n _N; k) is compared with conventional single sampling plans for variables and with TNT (n ₁, n ₂; c) scheme for attributes, and it is shown that the TNTVSS is more efficient.     

A comment on “An analysis of global warming in the Alpine Region based on nonlinear nonstationary time series models” by F. Battaglia and M. K. Protopapas

We discuss the paper by Battaglia and Protopapas concerning the analysis of global warming phenomenon in the Alpine Region. The Authors consider a nonlinear model which takes into account regimes in time and levels. In this contribution some of the statistical results presented in the paper are commented and a different approach to the problem is proposed. It is based on a temporal aggregation analysis and it can help to highlight some features in the data.     

Comment on: On the role of data,statistics and decisions in a pandemic statistics for climate protection and health—dare (more) progress!

AStA Advances in Statistical Analysis - In the Corona pandemic, it became clear with burning clarity how much good quality statistics are needed, and at the same time how unsuccessful we are at...