Some New Residual Treatment Effects Designs for Comparing Test Treatments with a Control

Pigeon & Raghavarao (1987) introduced control balanced residual treatment effects designs for the situation where one treatment is a control or standard and is to be compared with the v test treatments, and they have also given methods of construction of control balanced residual treatment effects designs and have investigated their efficiencies. In this paper we have developed some new families of control balanced residual treatment effects designs, which are Schur-optimal.     

Restricted region designs for multifactor mixture experiments

Designs for multifactor mixture experiments in which the component proportions are restricted by some specified lower and upper limits, are called restricted region designs (RRD) for multifactor mixture experiments. In this paper (i) a method of construction of designs for multifactor mixture experiments and (ii) two methods of constructing RRD for multifactor mixture experiments are described. Examples to illustrate the methods of construction have been given.     

Regular group divisible designs and Bhaskar Rao designs with block size three

Some recursive constructions are given for Bhaskar Rao designs. Using examples of these designs found by Shyam J. Singh, Rakesh Vyas and new ones given here we show the necessary conditions λ≡0 (mod 2), λυ(υ?1)≡0 (mod 24) are sufficient for the existence of Bhaskar Rao designs with one association class and block size 3. This result is used with a result of Street and Rodger to obtain regular partially balanced block designs with 2υ treatments, block size 3, λ₁=0, group size 2 and υ groups.     

On the optimality of chemical balance weighing designs

In this paper we consider the problem of optimally weighing n objects with N weighings on a chemical balance. Several previously known results are generalized. In particular, the designs shown by Ehlich (1964a) and Payne (1974) to be D-optimal in various classes of weighing designs where N≡2 (mod4) are shown to be optimal with respect to any optimality criterion of Type I as defined in Cheng (1980). Several results on the E-optimality of weighing designs are also given.     

Relationships of optimality for individual factors of a design

The optimality of two-factor experimental designs is studied in the dual senses of estimating contrasts in the parameters for each of the factors. The outline of comparison employed allows one to judge the performance of different designs for estimating contrasts of one set of parameters directly with the performance of the complementary set without going through a common intermediary step of considering all the parameters. The results hold for a wide class of optimality criteria (not merely D-, A- and E-optimality), which must satisfy a functional equation obtained in connection with our method. Also we investigate the optimality of row–column designs which satisfy an ‘adjusted orthogonality’ condition. Our point of departure is the paper by Shah, Raghavarao and Khatri (1976) and that of Mitchell and John (1977).     

Comparison of Three Sampling Designs

Three sampling designs are considered for estimating the sum of k population means by the sum of the corresponding sample means. These are (a) the optimal design; (b) equal sample sizes from all populations; and (c) sample sizes that render equal variances to all sample means. Designs (b) and (c) are equally inefficient, and may yield a variance up to k times as large as that of (a). Similar results are true when the cost of sampling is introduced, and they depend on the population sampled.     

Some Restricted randomization rules in sequential designs

This paper presents a new class of designs (Big Stick Designs) for sequentially assigning experimental units to treatments, when only the time covariate is considered. By prescribing the degree of imbalance which the experimenters can tolerate, complete randomization is used as long as the imbalance of the treatment allocation does not exceed the prescribed value. Once it reaches the value, a deterministic assignment is made to lower the imbalance. Such designs can be easily implemented with no programming and little personnel support. They compare favorably with the Biased Coin Designs, the Permuted Black Designs, and the Urn Designs, as far as the accidental bias and selection bias are concerned. Generalizations of these designs are considered to achieve various purposes, e.g., avoidance of deterministic assignments, early balance, etc.     

Low-order spatially-distinct latin squares

The order three to five spatially-distinct Latin squares, and the order three to six spatially-distinct Latin square treatment designs are listed. Some statistical results are given. Designs for 4, 5 and 6 treatments that were found previously to be robust to a linear by linear interacrion are shown to be optimal. Designs with good neighbour balanced are also considered.     

Construction of repeated measurements designs strongly balanced for residual effects

Abstract

Repeated Measurements Designs have been widely used in agriculture, animal husbandry, education, biology, botany and engineering. Balanced or strongly balanced repeated measurements designs are useful to balance out the residual effects. In this article, some new generators and construction procedures are proposed to obtain circular strongly balanced repeated measurements designs in periods of (a) equal sizes, (b) two different sizes, and (c) three different sizes.     

Φp-optimal second order designs for symmetric regions

Designs for quadratic regression on a cube, on a cube with truncated vertices and on a ball are studied in terms of a family of criteria, introduced by Kiefer (1974, 1975), that includes A-, D- and E-optimality. Both theoretical and numerical results on structure and performance are presented. In particular, D- and E-optimal designs are described and a procedure of construction of nearly robust (under variation of criterion) integer designs is suggested. Some examples are given for dimensions 4, 5 and 6.     

ROW AND COLUMAN DESIGNS WITH CONTIGUOUS REPLICATES

A method is given for constructing row and column designs for situations where replicates are contiguous. Designs of this type are needed in cotton variety trials. A table of generating arrays is given from which a series of resolvable designs can be constructed; these designs are called latinized α-designs. Some results from cotton variety trials are presented.     

Further results on transitive Kirkman triple systems

In this paper, we give a new construction for transitive Kirkman triple systems. As a consequence, it is shown that, to prove the existence of a TKTS(ν) for each admissible ν, it is sufficient to prove the existence of a TKTS(3p) where p is a prime, p ≡ 5 (mod 6).     

Adaptive designs for single‐arm phase II trials in oncology

Clinical phase II trials in oncology are conducted to determine whether the activity of a new anticancer treatment is promising enough to merit further investigation. Two‐stage designs are commonly used for this situation to allow for early termination. Designs proposed in the literature so far have the common drawback that the sample sizes for the two stages have to be specified in the protocol and have to be adhered to strictly during the course of the trial. As a consequence, designs that allow a higher extent of flexibility are desirable. In this article, we propose a new adaptive method that allows an arbitrary modification of the sample size of the second stage using the results of the interim analysis or external information while controlling the type I error rate. If the sample size is not changed during the trial, the proposed design shows very similar characteristics to the optimal two‐stage design proposed by Chang et al. (Biometrics 1987; 43:865–874). However, the new design allows the use of mid‐course information for the planning of the second stage, thus meeting practical requirements when performing clinical phase II trials in oncology. Copyright © 2012 John Wiley & Sons, Ltd.     

Combined array approach for optimal designs

Robust parameter design, originally proposed by Taguchi ( 1987 ) is an offline production technique for reducing variation and improving product's quality To achieve this objective Taguchi proposed the use of product arrays. However. the product array approach, results in an exorbitant number of runs To overcome the drawbacks of the product array Welch, Wu, Kang and Sacks ( 1990 ), Shoemaker, Tsui and Wu ( 1991 ) and Montgomery ( 1991a ) proposed the use of combined arrays, where the control factors and noise factors are combined in a single array. In this paper we study the concept of combined array for an intermediate class of designs where n = 1 (mod4), n = 2 (mod4) and n = 3 (mod4). The designs presented in this paper, though not orthogonal, offer a great reduction in the run-size.     

On the recovery of intra- and interblock information in n-ary designs

This note presents an extension of Q-method of analysis for binary designs given by Rao (1956) to n-ary balanced and partially balanced block designs. Here a linked n-ary block (LNB) design is defined as the dual of balanced n-ary (BN) design. Having a note on Yates’ (1939, 1940) method of P-analysis, we further extend the expressions for binary linked block (LB) designs given by Rao (1956) to linked n-ary block (LNB) designs which admit easy estimation of parameters for these type of all n-ary designs.     

The connectedness and optimality of a class of row-column designs

Balanced Incomplete Block Designs have been employed as row-column designs by a number of researchers. In this paper necessary and sufficient conditions for the connectedness of such designs are obtained, and methods for their optimisation are presented. The optimal design is shown to be always connected.     

Optimal blocked main effects plans

In this paper, we consider the construction of optimal blocked main effects designs where m two-level factors are to be studied in N runs which are partitioned into b blocks of equal size. For N ≡ 2±od4 sufficient conditions are derived for a design to be Φ _f optimal among all designs having main effects occurring equally often at their high and low levels within blocks and then this result is extended to the class of all designs for the case when the block size is two. Methods of constructing designs satisfying the sufficient conditions derived are also given.     

Orthogonal three-level parallel flats designs for user-specified resolution

Orthogonal factorial and fractional factorial designs are very popular in many experimental studies, particularly the two-level and three-level designs used in screening experiments. When an experimenter is able to specify the set of possibly nonnegligible factorial effects, it is sometimes possible to obtain an orthogonal design belonging to the class of parallel flats designs, that has a smaller run-size than a suitable design from the class of classical fractional factorial designs belonging to the class of single flat designs. Sri-vastava and Li (1996) proved a fundamental theorem of orthogonal s-level, s being a prime, designs of parallel flats type for the user-specified resolution. They also tabulated a series of orthogonal designs for the two-level case. No orthogonal designs for three-level case are available in their paper. In this paper, we present a simple proof for the theorem given in Srivastava and Li (1996) for the three-level case. We also give a dual form of the theorem, which is more useful for developing an algorithm for construction of orthogonal designs. Some classes of three-level orthogonal designs with practical run-size are given in the paper.     

Optimal cross-over designs for nonlinear mixed models using a first-order expansion

We consider the construction of optimal cross-over designs for nonlinear mixed effect models based on the first-order expansion. We show that for AB/BA designs a balanced subject allocation is optimal when the parameters depend on treatments only. For multiple period, multiple sequence designs, uniform designs are optimal among dual balanced designs under the same conditions. As a by-product, the same results hold for multivariate linear mixed models with variances depending on treatments.     

A note on the robustness of PBIBD(2)s against breakdown in the event of observation loss

Robustness against design breakdown following observation loss is investigated for Partially Balanced Incomplete Block Designs with two associate classes (PBIBD(2)s). New results are obtained which add to the body of knowledge on PBIBD(2)s. In particular, using an approach based on the E‐value of a design, all PBIBD(2)s with triangular and Latin square association schemes are established as having optimal block breakdown number. Furthermore, for group divisible designs not covered by existing results in the literature, a sufficient condition for optimal block breakdown number establishes that all members of some design sub‐classes have this property.