Inference for Random Coefficient INAR(1) Process Based on Frequency Domain Analysis

In this article, we present the explicit expressions for the higher-order moments and cumulants of the first-order random coefficient integer-valued autoregressive (RCINAR(1)) process. The spectral and bispectral density functions are also obtained, which can characterize the RCINAR(1) process in the frequency domain. We use a frequency domain approach which is named Whittle criterion to estimate the parameters of the process. We propose a test statistic which is based on the frequency domain approach for the hypothesis test, H₀: α = 0?H₁: 0 < α < 1, where α is the mean of the random coefficient in the process. The asymptotic distribution of the test statistic is obtained. We compare the proposed test statistic with other statistics that can test serial dependence in time series of count via a typically numerical simulation, which indicates that our proposed test statistic has a good power.     

Estimating changes in a multi-parameter exponential family

A two-stage procedure is studied for estimating changes in the parameters of the multi-parameter exponential family, given a sample X ₁,…,X _n. The first step is a likelihood ratio test of the hypothesis H_oof no change. Upon rejection of this hypothesis, the change point index and pre- and post-change parameters are estimated by maximum likelihood. The asymptotic (n → ∞) distribution of the log-likelihood ratio statistic is obtained under both H_oand local alternatives. The m.l.e.fs o of the pre- and post-change parameters are shown to be asymptotically jointly normal. The distribution of the change point estimate is obtained under local alternatives. Performance of the procedure for moderate samples is studied by Monte Carlo methods.     

Sequential analysis applied to testing the mean of a mormal population with known coefficient of variation

Given a normal population with mean y and known coefficient of variation the hypothesis H₀:μ=μ₀ is tested against H₁:μ=μ₁ using the sequential probability ratio test. The maximum of the expected sample number is shown to occur when μ is approxi¬mately equal to the harmonic mean of μ₀ and μ₁ and it is shown that this maximum value depends on μ₀ and μ₁, only through and it is found that the above test might be used to test H₀:μ≦μ₀ yntheir ratio. The operating characteristic function is investigated and it is found that the above test might be used to test against H₁:μ≧μ₁.     

A note on the asymptotic distribution of the process capability index C pmk

Process capability indices have been widely used to evaluate the process performance to the continuous improvement of quality and productivity. The distribution of the estimator of the process capability index C _pmk is very complicated and the asymptotic distribution is proposed by Chen and Hsu [The asymptotic distribution of the processes capability index C _pmk , Comm. Statist. Theory Methods 24(5) (1995), pp. 1279–1291]. However, we found a critical error for the asymptotic distribution when the population mean is not equal to the midpoint of the specification limits. In this paper, a correct version of the asymptotic distribution is given. An asymptotic confidence interval of C _pmk by using the correct version of asymptotic distribution is proposed and the lower bound can be used to test if the process is capable. A simulation study of the coverage probability of the proposed confidence interval is shown to be satisfactory. The relation of six sigma technique and the index C _pmk is also discussed in this paper. An asymptotic testing procedure to determine if a process is capable based on the index of C _pmk is also given in this paper.     

A combined p-value test for multiple hypothesis testing

Tests that combine p-values, such as Fisher's product test, are popular to test the global null hypothesis H₀ that each of n component null hypotheses, H₁,…,H_n, is true versus the alternative that at least one of H₁,…,H_n is false, since they are more powerful than classical multiple tests such as the Bonferroni test and the Simes tests. Recent modifications of Fisher's product test, popular in the analysis of large scale genetic studies include the truncated product method (TPM) of Zaykin et al. (2002), the rank truncated product (RTP) test of Dudbridge and Koeleman (2003) and more recently, a permutation based test—the adaptive rank truncated product (ARTP) method of Yu et al. (2009). The TPM and RTP methods require users' specification of a truncation point. The ARTP method improves the performance of the RTP method by optimizing selection of the truncation point over a set of pre-specified candidate points. In this paper we extend the ARTP by proposing to use all the possible truncation points {1,…,n} as the candidate truncation points. Furthermore, we derive the theoretical probability distribution of the test statistic under the global null hypothesis H₀. Simulations are conducted to compare the performance of the proposed test with the Bonferroni test, the Simes test, the RTP test, and Fisher's product test. The simulation results show that the proposed test has higher power than the Bonferroni test and the Simes test, as well as the RTP method. It is also significantly more powerful than Fisher's product test when the number of truly false hypotheses is small relative to the total number of hypotheses, and has comparable power to Fisher's product test otherwise.     

BAHADUR SLOPES FOR COMPARISONS OF TESTS BASED ON RESAMPLING

Let X₁,…, X_n be random variables symmetric about θ from a common unknown distribution F_θ(x) =F(x–θ). To test the null hypothesis H₀:θ= 0 against the alternative H₁:θ > 0, permutation tests can be used at the cost of computational difficulties. This paper investigates alternative tests that are computationally simpler, notably some bootstrap tests which are compared with permutation tests. Of these the symmetrical bootstrap-f test competes very favourably with the permutation test in terms of Bahadur asymptotic efficiency, so it is a very attractive alternative.     

Ratio test for variance change point in linear process with long memory

In this paper we consider the detection problem of variance change point in linear process with long memory. We propose the ratio test to detect the variance change point. The limiting distribution for test statistics under H ₀ is derived and the consistency of the test is also established. In comparison with the existing CUSUM of squares (SCUSUM) test, the ratio test does not need to estimate the long memory parameter in practical situation and therefore it can be used more conveniently.     

REGRESSION ANALYSIS USING SCRAMBLED RESPONSES

This paper investigates the general linear regression model Y = Xβ+e assuming the dependent variable is observed as a scrambled response using Eichhorn & Hayre's (1983) approach to collecting sensitive personal information. The estimates of the parameters in the model remain unbiased, but the variances of the estimates increase due to scrambling. The Wald test of the null hypothesis H₀: β=β₀, against the alternative hypothesis H_a: β#β₀, is also investigated. Parameter estimates obtained from scrambled responses are compared to those from conventional or direct-question surveys, using simulation. The coverage by nominal 95% confidence intervals is also reported.     

Kolmogorov-type tests of goodness-of-fit against stochastic ordering

This article addresses the problem of testing the null hypothesis H₀ that a random sample of size n is from a distribution with the completely specified continuous cumulative distribution function F_n(x). Kolmogorov-type tests for H₀ are based on the statistics C⁺ _n = Sup[F_n(x)?F₀(x)] and C^? _n=Sup[F₀(x)?F_n(x)], where F_n(x) is an empirical distribution function. Let F(x) be the true cumulative distribution function, and consider the ordered alternative H₁: F(x)≥F₀(x) for all x and with strict inequality for some x. Although it is natural to reject H₀ and accept H₁ if C ⁺ _n is large, this article shows that a test that is superior in some ways rejects F₀ and accepts H₁ if C^mdash _n is small. Properties of the two tests are compared based on theoretical results and simulated results.     

One-sided range test for testing against an ordered alternative under heteroscedasticity

In a one-way fixed effects analysis of variance model, when normal variances are unknown and possibly unequal, a one-sided range test for testing the null hypothesis H ₀ : μ ₁ = … = μ_k against an ordered alternative H_a : μ ₁ ≤ … ≤ μ_k by a single-stage and a two-stage procedure, respectively, is proposed. The critical values under H ₀ and the power under a specific alternative are calculated. Relation between the one-stage and the two-stage test procedures is discussed. A numerical example to illustrate these procedures is given.     

An asymptotic confidence interval for the process capability index Cpm

Abstract

The use of indices as an estimation tool of process capability is long-established among the statistical quality professionals. Numerous capability indices have been proposed in last few years. C_pm constitutes one of the most widely used capability indices and its estimation has attracted much interest. In this paper, we propose a new method for constructing an approximate confidence interval for the index C_pm. The proposed method is based on the asymptotic distribution of the index C_pm obtained by the Delta Method. Under some regularity conditions, the distribution of an estimator of the process capability index C_pm is asymptotically normal.     

A new generation of process capability indices based on fuzzy measurements

Process capability indices (PCIs) provide numerical measures on whether a process conforms to the defined manufacturing capability prerequisite. These have been successfully applied by companies to compete with and to lead high-profit markets by evaluating the quality and productivity performance. The PCI C_p compares the output of a process to the specification limits (SLs) by forming the ratio of the width between the process SLs with the width of the natural tolerance limits which is measured by six process standard deviation units. As another common PCI, C_pm incorporates two variation components which are variation to the process mean and deviation of the process mean from the target. A meaningful generalized version of above PCIs is introduced in this paper which is able to handle in a fuzzy environment. These generalized PCIs are able to measure the capability of a fuzzy-valued process in producing products on the basis of a fuzzy quality. Fast computing formulas for the generalized PCIs are computed for normal and symmetric triangular fuzzy observations, where the fuzzy quality is defined by linear and exponential fuzzy SLs. A practical example is presented to show the performance of proposed indices.     

A one-sided test for testino homogeneity of scale parameters against simple ordered alternative

In an earlier paper the authors (1997) extended the results of Hayter (1990) to the two parameter exponential probability model. This paper addressee the extention to the scale parameter case under location-scale probability model. Consider k (k≧3) treatments or competing firms such that an observation from with treatment or firm follows a distribution with cumulative distribution function (cdf) F_i(x)=F[(x-μ_i)/Q_i], where F(·) is any absolutely continuous cdf, i=1,…,k. We propose a test to test the null hypothesis H₀:θ₁=…=θ_k against the simple ordered alternative H₁:θ₁≦…≦θ_k, with at least one strict inequality, using the data X_i,j, i=1,…k; j=1,…,n₁. Two methods to compute the critical points of the proposed test have been demonstrated by talking k two parameter exponential distributions. The test procedure also allows us to construct simultaneous one sided confidence intervals (SOCIs) for the ordered pairwise ratios θ_j/θ_i, 1≦i<j≦k. Statistical simulation revealed that: 9i) actual sizes of the critical points are almost conservative and (ii) power of the proposed test relative to some existing tests is higher.     

Goodness-of-fit test for uniform stochastic ordering among several distributions

The likelihood-ratio test (LRT) is considered as a goodness-of-fit test for the null hypothesis that several distribution functions are uniformly stochastically ordered. Under the null hypothesis, H₁ : F₁ ? F₂ ?···? F_N, the asymptotic distribution of the LRT statistic is a convolution of several chi-bar-square distributions each of which depends upon the location parameter. The least-favourable parameter configuration for the LRT is not unique. It can be two different types and depends on the number of distributions, the number of intervals and the significance level α. This testing method is illustrated with a data set of survival times of five groups of male fruit flies.     

A Bayesian procedure for assessing process performance based on the third-generation capability index

Capability indices that qualify process potential and process performance are practical tools for successful quality improvement activities and quality program implementation. Most existing methods to assess process capability were derived on the basis of the traditional frequentist point of view. This paper considers the problem of estimating and testing process capability based on the third-generation capability index C _pmk from the Bayesian point of view. We first derive the posterior probability p for the process under investigation is capable. The one-sided credible interval, a Bayesian analog of the classical lower confidence interval, can be obtained to assess process performance. To investigate the effectiveness of the derived results, a series of simulation was undertaken. The results indicate that the performance of the proposed Bayesian approach depends strongly on the value of ξ=(μ?T)/σ. It performs very well with the accurate coverage rate when μ is sufficiently far from T. In those cases, they have the same acceptable performance even though the sample size n is as small as 25.     

Robustness of the Multiple Correlation Coefficient When Sampling From a Mixture of Two Multivariate Normal Populations

The density of the multiple correlation coefficient is derived by direct integration when the sample covariance matrix has a linear non-central distribution. Using the density, we deduce the null and non-null distribution of the multiple correlation coefficient when sampling from a mixture of two multivariate normal populations with the same covariance matrix. We also compute actual significance levels of the test of the hypothesis H_o : ρ_1·2…p = 0 versus H_a:ρ_1·2…p > 0, given the mixture model.