Detecting Outliers in Gamma Distribution

Zerbet and Nikulin presented the new statistic Z _k for detecting outliers in exponential distribution. They also compared this statistic with Dixon's statistic D _k . In this article, we extend this approach to gamma distribution and compare the result with Dixon's statistic. The results show that the test based on statistic Z _k is more powerful than the test based on the Dixon's statistic.     

Testing the dilation order by using cumulative residual Tsallis entropy

In this paper, we introduce a new test for the dilation order based on cumulative residual Tsallis entropy of order α. The effect of the values of parameter α on the power of the test statistics is numerically investigated. The asymptotic distribution of the test statistic is given. The performance of the test statistic is evaluated using a simulation study. Finally, some numerical examples illustrating the theory are also given.     

Inference for Random Coefficient INAR(1) Process Based on Frequency Domain Analysis

In this article, we present the explicit expressions for the higher-order moments and cumulants of the first-order random coefficient integer-valued autoregressive (RCINAR(1)) process. The spectral and bispectral density functions are also obtained, which can characterize the RCINAR(1) process in the frequency domain. We use a frequency domain approach which is named Whittle criterion to estimate the parameters of the process. We propose a test statistic which is based on the frequency domain approach for the hypothesis test, H₀: α = 0?H₁: 0 < α < 1, where α is the mean of the random coefficient in the process. The asymptotic distribution of the test statistic is obtained. We compare the proposed test statistic with other statistics that can test serial dependence in time series of count via a typically numerical simulation, which indicates that our proposed test statistic has a good power.     

A modified Friedman test for randomized complete block designs

The Friedman test is often used for a randomized complete block design when the normality assumption is not satisfied or the data are ordinal. The Friedman test can be viewed as an extension of the sign test for multiple measurements within each subject or block. We propose a modified Friedman test based on the Wilcoxon sign rank approach. Coincidentally, Tukey proposed a test statistic similar to our proposed test, but blocks are ranked by the minimum difference within each block. In the proposed test, we use the variance of block to rank the blocks, with the least variance being ranked the smallest. In both Tukey test and the modified Friedman test, linear ranks are used for blocks and treatments. The Tukey test belongs to the family of weighted-ranking test from Quade (1979 Quade, D. (1979). Using weighted rankings in the analysis of complete blocks with additive block effects. Journal of the American Statistical Association 74(367):680–683. [Google Scholar]).The modified Friedman test, the Friedman test and the Tukey test are compared under various conditions and the results indicate that the proposed test is generally more powerful than the Friedman test and the Tukey test when the number of groups is small.     

A Simple Test Procedure When Data are Given by n Indepenent Blocks

In this article we consider a test procedure which is useful in the situations where data are given by n independent blocks and the experimental conditions differ between blocks. The basic idea is very simple. The significance of the sample for each block is calculated and then standardized by its null mean and variance. The sum of standardized significances is proposed as a test statistic. The normal approximation for large n and the exact method for small n are applied in the continuous case. For the discrete case, some devices are also proposed. Several examples are given in order to explain how to apply the procedure.     

Preliminary phi-divergence test estimators for linear restrictions in a logistic regression model

The problem of estimation of the parameters in a logistic regression model is considered under multicollinearity situation when it is suspected that the parameter of the logistic regression model may be restricted to a subspace. We study the properties of the preliminary test based on the minimum ϕ -divergence estimator as well as in the ϕ -divergence test statistic. The minimum ϕ -divergence estimator is a natural extension of the maximum likelihood estimator and the ϕ -divergence test statistics is a family of the test statistics for testing the hypothesis that the regression coefficients may be restricted to a subspace.     

An extension of the Anderson–Darling k-sample test to arbitrary sample space partition sizes

In this paper we first show that the k-sample Anderson–Darling test is basically an average of Pearson statistics in 2?×?k contingency tables that are induced by observation-based partitions of the sample space. As an extension, we construct a family of rank test statistics, indexed by c?∈??, which is based on similarly constructed c?×?k partitions. An extensive simulation study, in which we compare the new test with others, suggests that generally very high powers are obtained with the new tests. Finally we propose a decomposition of the test statistic in interpretable components.     

Testing for normality in linear regression models

The importance of the normal distribution for fitting continuous data is well known. However, in many practical situations data distribution departs from normality. For example, the sample skewness and the sample kurtosis are far away from 0 and 3, respectively, which are nice properties of normal distributions. So, it is important to have formal tests of normality against any alternative. D'Agostino et al. [A suggestion for using powerful and informative tests of normality, Am. Statist. 44 (1990), pp. 316–321] review four procedures Z ²(g ₁), Z ²(g ₂), D and K ² for testing departure from normality. The first two of these procedures are tests of normality against departure due to skewness and kurtosis, respectively. The other two tests are omnibus tests. An alternative to the normal distribution is a class of skew-normal distributions (see [A. Azzalini, A class of distributions which includes the normal ones, Scand. J. Statist. 12 (1985), pp. 171–178]). In this paper, we obtain a score test (W) and a likelihood ratio test (LR) of goodness of fit of the normal regression model against the skew-normal family of regression models. It turns out that the score test is based on the sample skewness and is of very simple form. The performance of these six procedures, in terms of size and power, are compared using simulations. The level properties of the three statistics LR, W and Z ²(g ₁) are similar and close to the nominal level for moderate to large sample sizes. Also, their power properties are similar for small departure from normality due to skewness (γ₁≤0.4). Of these, the score test statistic has a very simple form and computationally much simpler than the other two statistics. The LR statistic, in general, has highest power, although it is computationally much complex as it requires estimates of the parameters under the normal model as well as those under the skew-normal model. So, the score test may be used to test for normality against small departure from normality due to skewness. Otherwise, the likelihood ratio statistic LR should be used as it detects general departure from normality (due to both skewness and kurtosis) with, in general, largest power.     

Spurious Regressions with Time-Series Data: Further Asymptotic Results

A “spurious regression” is one in which the time-series variables are non stationary and independent. It is well known that in this context the OLS parameter estimates and the R ² converge to functionals of Brownian motions, the “t-ratios” diverge in distribution, and the Durbin–Watson statistic converges in probability to zero. We derive corresponding results for some common tests for the normality and homoskedasticity of the errors in a spurious regression.     

Average rank correlation statistics in the presence of ties

The problem of n judges ranking r objects is considered in the situation where ties are permitted. Asymtotic distributions under the null hypothesis of complete randomness in the rankings are derived for the test statistics of average rank correlations between all pairs of ranking where the rank correlations are measured either by Spearman rho or Kendall tau. The relative efficeincies of these average rank correlatins are derived using approximate Bahadur slope and limiting pitman efficiency, and in both cases the Kendall statistic is shown to be more efficient. Some interpretatins of these and related results are also given.     

Wilcoxon's signed‐rank statistic: what null hypothesis and why it matters

In statistical literature, the term ‘signed‐rank test’ (or ‘Wilcoxon signed‐rank test’) has been used to refer to two distinct tests: a test for symmetry of distribution and a test for the median of a symmetric distribution, sharing a common test statistic. To avoid potential ambiguity, we propose to refer to those two tests by different names, as ‘test for symmetry based on signed‐rank statistic’ and ‘test for median based on signed‐rank statistic’, respectively. The utility of such terminological differentiation should become evident through our discussion of how those tests connect and contrast with sign test and one‐sample t‐test. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.     

A comparison of several adaptive tests for paired data

In the last few years, two adaptive tests for paired data have been proposed. One test proposed by Freidlin et al. [On the use of the Shapiro–Wilk test in two-stage adaptive inference for paired data from moderate to very heavy tailed distributions, Biom. J. 45 (2003), pp. 887–900] is a two-stage procedure that uses a selection statistic to determine which of three rank scores to use in the computation of the test statistic. Another statistic, proposed by O'Gorman [Applied Adaptive Statistical Methods: Tests of Significance and Confidence Intervals, Society for Industrial and Applied Mathematics, Philadelphia, 2004], uses a weighted t-test with the weights determined by the data. These two methods, and an earlier rank-based adaptive test proposed by Randles and Hogg [Adaptive Distribution-free Tests, Commun. Stat. 2 (1973), pp. 337–356], are compared with the t-test and to Wilcoxon's signed-rank test. For sample sizes between 15 and 50, the results show that the adaptive test proposed by Freidlin et al. and the adaptive test proposed by O'Gorman have higher power than the other tests over a range of moderate to long-tailed symmetric distributions. The results also show that the test proposed by O'Gorman has greater power than the other tests for short-tailed distributions. For sample sizes greater than 50 and for small sample sizes the adaptive test proposed by O'Gorman has the highest power for most distributions.     

Contingency tables with fuzzy information

ABSTRACT

This paper extends the classical methods of analysis of a two-way contingency table to the fuzzy environment for two cases: (1) when the available sample of observations is reported as imprecise data, and (2) the case in which we prefer to categorize the variables based on linguistic terms rather than as crisp quantities. For this purpose, the α-cuts approach is used to extend the usual concepts of the test statistic and p-value to the fuzzy test statistic and fuzzy p-value. In addition, some measures of association are extended to the fuzzy version in order to evaluate the dependence in such contingency tables. Some practical examples are provided to explain the applicability of the proposed methods in real-world problems.     

Higher-order asymptotics under model misspecification

Most of the higher-order asymptotic results in statistical inference available in the literature assume model correctness. The aim of this paper is to develop higher-order results under model misspecification. The density functions to O(n^?3/2) of the robust score test statistic and the robust Wald test statistic are derived under the null hypothesis, for the scalar as well as the multiparameter case. Alternate statistics which are robust to O(n^?3/2) are also proposed.     

Exact unconditional testing procedures for comparing two independent Poisson rates

We consider seven exact unconditional testing procedures for comparing adjusted incidence rates between two groups from a Poisson process. Exact tests are always preferable due to the guarantee of test size in small to medium sample settings. Han [Comparing two independent incidence rates using conditional and unconditional exact tests. Pharm Stat. 2008;7(3):195–201] compared the performance of partial maximization p-values based on the Wald test statistic, the likelihood ratio test statistic, the score test statistic, and the conditional p-value. These four testing procedures do not perform consistently, as the results depend on the choice of test statistics for general alternatives. We consider the approach based on estimation and partial maximization, and compare these to the ones studied by Han (2008) for testing superiority. The procedures are compared with regard to the actual type I error rate and power under various conditions. An example from a biomedical research study is provided to illustrate the testing procedures. The approach based on partial maximization using the score test is recommended due to the comparable performance and computational advantage in large sample settings. Additionally, the approach based on estimation and partial maximization performs consistently for all the three test statistics, and is also recommended for use in practice.     

Distributional Studies and the Computer: An Analysis of Durbin's Rank Test

A study of the distribution of a statistic involves two major steps: (a) working out its asymptotic, large n, distribution, and (b) making the connection between the asymptotic results and the distribution of the statistic for the sample sizes used in practice. This crucial second step is not included in many studies. In this article, the second step is applied to Durbin's (1951) well-known rank test of treatment effects in balanced incomplete block designs (BIB's). We found that asymptotic, χ², distributions do not provide adequate approximations in most BIB's. Consequently, we feel that several of Durbin's recommendations should be altered.     

General scores statistics on ranks in the analysis of unbalanced designs

The authors consider the situation of incomplete rankings in which n judges independently rank k_i ∈ {2, …, t} objects. They wish to test the null hypothesis that each judge picks the ranking at random from the space of k_i! permutations of the integers 1, …, k_i. The statistic considered is a generalization of the Friedman test in which the ranks assigned by each judge are replaced by real‐valued functions a(j, k_i), 1 ≤ j ≤ k_i ≤ t of the ranks. The authors define a measure of pairwise similarity between complete rankings based on such functions, and use averages of such similarities to construct measures of the level of concordance of the judges' rankings. In the complete ranking case, the resulting statistics coincide with those defined by Hájek & ?idák (1967, p. 118), and Sen (1968). These measures of similarity are extended to the situation of incomplete rankings. A statistic is derived in this more general situation and its properties are investigated.     

Book Reviews

The Levene test is a widely used test for detecting differences in dispersion. The modified Levene transformation using sample medians is considered in this article. After Levene's transformation the data are not normally distributed, hence, nonparametric tests may be useful. As the Wilcoxon rank sum test applied to the transformed data cannot control the type I error rate for asymmetric distributions, a permutation test based on reallocations of the original observations rather than the absolute deviations was investigated. Levene's transformation is then only an intermediate step to compute the test statistic. Such a Levene test, however, cannot control the type I error rate when the Wilcoxon statistic is used; with the Fisher–Pitman permutation test it can be extremely conservative. The Fisher–Pitman test based on reallocations of the transformed data seems to be the only acceptable nonparametric test. Simulation results indicate that this test is on average more powerful than applying the t test after Levene's transformation, even when the t test is improved by the deletion of structural zeros.     

The X2-goodness-of-fit tests with moment type estimators

In the x²-goodness-of-fit test the underlying null hypothesis usually involves unknown parameters. In this article we study the asymptotic distribution of the Pearson statistic when the unknown parameters are estimated by a moment type estimator based on the ungrouped data. As is expected the usual Pearson statistic is no longer asymptotically x²-distributed in this situation. We propose a statistic [Qcirc] which under certain regularity conditions is asymptotically x²-distributed. We also propose a statistic Q? for the goodness-of-fit test when the class boundaries are random. The asymptotic powers of [Qcirc] and [Qcirc]? tests are discussed.     

Robust inference for group sequential trials

For ethical reasons, group sequential trials were introduced to allow trials to stop early in the event of extreme results. Endpoints in such trials are usually mortality or irreversible morbidity. For a given endpoint, the norm is to use a single test statistic and to use that same statistic for each analysis. This approach is risky because the test statistic has to be specified before the study is unblinded, and there is loss in power if the assumptions that ensure optimality for each analysis are not met. To minimize the risk of moderate to substantial loss in power due to a suboptimal choice of a statistic, a robust method was developed for nonsequential trials. The concept is analogous to diversification of financial investments to minimize risk. The method is based on combining P values from multiple test statistics for formal inference while controlling the type I error rate at its designated value.This article evaluates the performance of 2 P value combining methods for group sequential trials. The emphasis is on time to event trials although results from less complex trials are also included. The gain or loss in power with the combination method relative to a single statistic is asymmetric in its favor. Depending on the power of each individual test, the combination method can give more power than any single test or give power that is closer to the test with the most power. The versatility of the method is that it can combine P values from different test statistics for analysis at different times. The robustness of results suggests that inference from group sequential trials can be strengthened with the use of combined tests.