Hierarchical likelihood approach to non-Gaussian factor analysis

Factor models, structural equation models (SEMs) and random-effect models share the common feature that they assume latent or unobserved random variables. Factor models and SEMs allow well developed procedures for a rich class of covariance models with many parameters, while random-effect models allow well developed procedures for non-normal models including heavy-tailed distributions for responses and random effects. In this paper, we show how these two developments can be combined to result in an extremely rich class of models, which can be beneficial to both areas. A new fitting procedures for binary factor models and a robust estimation approach for continuous factor models are proposed.     

A stationarity test on Markov chain models based on marginal distribution

A stationarity test on Markov chain models is proposed in this paper. Most of the previous test procedures for the Markov chain models have been done based on the conditional probabilities of a transition matrix. The likelihood ratio and Pearson type chi-square tests have been used for testing stationarity and order of Markov chains. This paper uses the efficient score test, an extension of the test developed by Tsiatis (1980) [18], for testing the stationarity of Markov chain models based on the marginal distribution as obtained by Azzalini (1994) [2]. For testing the suitability of the proposed method, a numerical example of real life data and simulation studies for comparison with an alternative test procedure are given.     

Page's sequential procedure for change-point detection in time series regression

In a variety of different settings cumulative sum (CUSUM) procedures have been applied for the sequential detection of structural breaks in the parameters of stochastic models. Yet their performance depends strongly on the time of change and is best under early change scenarios. For later changes their finite sample behavior is rather questionable. We therefore propose modified CUSUM procedures for the detection of abrupt changes in the regression parameter of multiple time series regression models, that show a higher stability with respect to the time of change than ordinary CUSUM procedures. The asymptotic distributions of the test statistics and the consistency of the procedures are provided. In a simulation study it is shown that the proposed procedures behave well in finite samples. Finally the procedures are applied to a set of capital asset pricing data related to the Fama–French extension of the CAPM.     

Rank repeated measures analysis of covariance

When analyzing a response variable at the presence of both factors and covariates, with potentially correlated responses and violated assumptions of the normal residual or the linear relationship between the response and the covariates, rank-based tests can be an option for inferential procedures instead of the parametric repeated measures analysis of covariance (ANCOVA) models. This article derives a rank-based method for multi-way ANCOVA models with correlated responses. The generalized estimating equations (GEE) technique is employed to construct the proposed rank tests. Asymptotic properties of the proposed tests are derived. Simulation studies confirmed the performance of the proposed tests.     

Invariant tests based on M-estimators,estimating functions,and the generalized method of moments

We study the invariance properties of various test criteria which have been proposed for hypothesis testing in the context of incompletely specified models, such as models which are formulated in terms of estimating functions (Godambe, 1960) or moment conditions and are estimated by generalized method of moments (GMM) procedures (Hansen, 1982), and models estimated by pseudo-likelihood (Gouriéroux, Monfort, and Trognon, 1984b,c) and M-estimation methods. The invariance properties considered include invariance to (possibly nonlinear) hypothesis reformulations and reparameterizations. The test statistics examined include Wald-type, LR-type, LM-type, score-type, and C(α)?type criteria. Extending the approach used in Dagenais and Dufour (1991), we show first that all these test statistics except the Wald-type ones are invariant to equivalent hypothesis reformulations (under usual regularity conditions), but all five of them are not generally invariant to model reparameterizations, including measurement unit changes in nonlinear models. In other words, testing two equivalent hypotheses in the context of equivalent models may lead to completely different inferences. For example, this may occur after an apparently innocuous rescaling of some model variables. Then, in view of avoiding such undesirable properties, we study restrictions that can be imposed on the objective functions used for pseudo-likelihood (or M-estimation) as well as the structure of the test criteria used with estimating functions and generalized method of moments (GMM) procedures to obtain invariant tests. In particular, we show that using linear exponential pseudo-likelihood functions allows one to obtain invariant score-type and C(α)?type test criteria, while in the context of estimating function (or GMM) procedures it is possible to modify a LR-type statistic proposed by Newey and West (1987) to obtain a test statistic that is invariant to general reparameterizations. The invariance associated with linear exponential pseudo-likelihood functions is interpreted as a strong argument for using such pseudo-likelihood functions in empirical work.     

Adaptive interval estimation in one-way random effects models

Two-stage procedures are introduced to control the width and coverage (validity) of confidence intervals for the estimation of the mean, the between groups variance component and certain ratios of the variance components in one-way random effects models. The procedures use the pilot sample data to estimate an “optimal” group size and then proceed to determine the number of groups by a stopping rule. Such sampling plans give rise to unbalanced data, which are consequently analyzed by the harmonic mean method. Several asymptotic results concerning the proposed procedures are given along with simulation results to assess their performance in moderate sample size situations. The proposed procedures were found to effectively control the width and probability of coverage of the resulting confidence intervals in all cases and were also found to be robust in the presence of missing observations. From a practical point of view, the procedures are illustrated using a real data set and it is shown that the resulting unbalanced designs tend to require smaller sample sizes than is needed in a corresponding balanced design where the group size is arbitrarily pre-specified.     

Generalised Rank Regression Estimator with Standard Error Adjusted Lasso

One of the standard variable selection procedures in multiple linear regression is to use a penalisation technique in least‐squares (LS) analysis. In this setting, many different types of penalties have been introduced to achieve variable selection. It is well known that LS analysis is sensitive to outliers, and consequently outliers can present serious problems for the classical variable selection procedures. Since rank‐based procedures have desirable robustness properties compared to LS procedures, we propose a rank‐based adaptive lasso‐type penalised regression estimator and a corresponding variable selection procedure for linear regression models. The proposed estimator and variable selection procedure are robust against outliers in both response and predictor space. Furthermore, since rank regression can yield unstable estimators in the presence of multicollinearity, in order to provide inference that is robust against multicollinearity, we adjust the penalty term in the adaptive lasso function by incorporating the standard errors of the rank estimator. The theoretical properties of the proposed procedures are established and their performances are investigated by means of simulations. Finally, the estimator and variable selection procedure are applied to the Plasma Beta‐Carotene Level data set.     

Studentized robust statistics for,main effects in a two-factor manova

Multiresponse experiments in two-faoior manova are considered. StalibLical procedures of the test and estimation, based on studentized robust statistics. for location parameters in the models arc piupused. Large sample properties of their procedures as the cell sizes tend to infinity are investigated. Although Fisher's consistency is assumed in the theory ol ili-estimators, it is not needed. in this paper. For the univariate case, it is found that the asymptotic relative efficiencies (ARE's) of the proposed procedures relative to classical procedures agrees with the classical A/Sisresults of Huber's one sample Mestimator relative to the sample mean. By simulation studies, it can be seen that the proposed estimators are more efficient than the least squares estimators except for the case where the underlying distribution is normal     

Laplace based approximate posterior inference for differential equation models

Ordinary differential equations are arguably the most popular and useful mathematical tool for describing physical and biological processes in the real world. Often, these physical and biological processes are observed with errors, in which case the most natural way to model such data is via regression where the mean function is defined by an ordinary differential equation believed to provide an understanding of the underlying process. These regression based dynamical models are called differential equation models. Parameter inference from differential equation models poses computational challenges mainly due to the fact that analytic solutions to most differential equations are not available. In this paper, we propose an approximation method for obtaining the posterior distribution of parameters in differential equation models. The approximation is done in two steps. In the first step, the solution of a differential equation is approximated by the general one-step method which is a class of numerical numerical methods for ordinary differential equations including the Euler and the Runge-Kutta procedures; in the second step, nuisance parameters are marginalized using Laplace approximation. The proposed Laplace approximated posterior gives a computationally fast alternative to the full Bayesian computational scheme (such as Makov Chain Monte Carlo) and produces more accurate and stable estimators than the popular smoothing methods (called collocation methods) based on frequentist procedures. For a theoretical support of the proposed method, we prove that the Laplace approximated posterior converges to the actual posterior under certain conditions and analyze the relation between the order of numerical error and its Laplace approximation. The proposed method is tested on simulated data sets and compared with the other existing methods.     

Nonparametric Independence Screening in Sparse Ultra-High Dimensional Additive Models

A variable screening procedure via correlation learning was proposed in Fan and Lv (2008) to reduce dimensionality in sparse ultra-high dimensional models. Even when the true model is linear, the marginal regression can be highly nonlinear. To address this issue, we further extend the correlation learning to marginal nonparametric learning. Our nonparametric independence screening is called NIS, a specific member of the sure independence screening. Several closely related variable screening procedures are proposed. Under general nonparametric models, it is shown that under some mild technical conditions, the proposed independence screening methods enjoy a sure screening property. The extent to which the dimensionality can be reduced by independence screening is also explicitly quantified. As a methodological extension, a data-driven thresholding and an iterative nonparametric independence screening (INIS) are also proposed to enhance the finite sample performance for fitting sparse additive models. The simulation results and a real data analysis demonstrate that the proposed procedure works well with moderate sample size and large dimension and performs better than competing methods.     

Empirical likelihood for nonlinear regression models with nonignorable missing responses

This article develops three empirical likelihood (EL) approaches to estimate parameters in nonlinear regression models in the presence of nonignorable missing responses. These are based on the inverse probability weighted (IPW) method, the augmented IPW (AIPW) method and the imputation technique. A logistic regression model is adopted to specify the propensity score. Maximum likelihood estimation is used to estimate parameters in the propensity score by combining the idea of importance sampling and imputing estimating equations. Under some regularity conditions, we obtain the asymptotic properties of the maximum EL estimators of these unknown parameters. Simulation studies are conducted to investigate the finite sample performance of our proposed estimation procedures. Empirical results provide evidence that the AIPW procedure exhibits better performance than the other two procedures. Data from a survey conducted in 2002 are used to illustrate the proposed estimation procedure. The Canadian Journal of Statistics 48: 386–416; 2020 © 2020 Statistical Society of Canada     

Modifications of REML algorithm for HGLMs

Hierarchical generalized linear models (HGLMs) have become popular in data analysis. However, their maximum likelihood (ML) and restricted maximum likelihood (REML) estimators are often difficult to compute, especially when the random effects are correlated; this is because obtaining the likelihood function involves high-dimensional integration. Recently, an h-likelihood method that does not involve numerical integration has been proposed. In this study, we show how an h-likelihood method can be implemented by modifying the existing ML and REML procedures. A small simulation study is carried out to investigate the performances of the proposed methods for HGLMs with correlated random effects.     

Simulations on the Jelinski-Moranda model of software reliability; application of some parametric bootstrap methods

In software reliability theory many different models have been proposed and investigated. some of these models intuitively match reality better than others. The properties of certain statistical estimation procedures in connection with these models are also model-dependent. In this paper we investigate how well the maximum likelihood estimation procedure and the parametric bootstrap behave in the case of the very well-known software reliability model suggested by Jelinski and Moranda (1972). For this study we will make use of simulated data.     

Bootstrapping Regression Parameters in Multivariate Survival Analysis

Bootstrap methods are proposed for estimating sampling distributions and associated statistics for regression parameters in multivariate survival data. We use an Independence Working Model (IWM) approach, fitting margins independently, to obtain consistent estimates of the parameters in the marginal models. Resampling procedures, however, are applied to an appropriate joint distribution to estimate covariance matrices, make bias corrections, and construct confidence intervals. The proposed methods allow for fixed or random explanatory variables, the latter case using extensions of existing resampling schemes (Loughin,1995), and they permit the possibility of random censoring. An application is shown for the viral positivity time data previously analyzed by Wei, Lin, and Weissfeld (1989). A simulation study of small-sample properties shows that the proposed bootstrap procedures provide substantial improvements in variance estimation over the robust variance estimator commonly used with the IWM. This revised version was published online in July 2006 with corrections to the Cover Date.     

Outlier detection and accommodation in general spatial models

This paper studies outlier detection and accommodation in general spatial models including spatial autoregressive models and spatial error model as special cases. Using mean-shift and variance-weight models respectively, test statistics for multiple outliers are derived and the detecting procedures are proposed. In addition, several key diagnostic measures such as standardized residuals and leverage measure are defined in general spatial models. Outlier modified models are proposed to accommodate outliers in the data set. The performance of test statistics, including size and power, are examined via simulation studies. Three real examples are analyzed and the results show that the proposed methodology is useful for identifying and accommodating outliers in general spatial models.     

Ordered Regressions

There are often situations where two or more regression functions are ordered over a range of covariate values. In this paper, we develop efficient constrained estimation and testing procedures for such models. Specifically, necessary and sufficient conditions for ordering generalized linear regressions are given and shown to unify previous results obtained for simple linear regression, for polynomial regression and in the analysis of covariance models. We show that estimating the parameters of ordered linear regressions requires either quadratic programming or semi‐infinite programming, depending on the shape of the covariate space. A distance‐type test for order is proposed. Simulations demonstrate that the proposed methodology improves the mean square error and power compared with the usual, unconstrained, estimation and testing procedures. Improvements are often substantial. The methodology is extended to order generalized linear models where convex semi‐infinite programming plays a role. The methodology is motivated by, and applied to, a hearing loss study.     

Statistical inference for fixed-effects partially linear regression models with errors in variables

Fixed-effects partially linear regression models are useful tools to analyze data from economic, genetic and other fields. In this paper, we consider estimation and inference procedures when some of the covariates are measured with errors. The previously proposed estimations, including difference-based series estimation (Baltagi and Li in Ann Econ Finan 3:103--116, 2002) and profile least squares estimation (Fan et al. in J Am Stat Assoc 100:781--813, 2005) are no longer consistent because of the attenuation. We propose a new estimation by taking the measurement errors into account. Our proposed estimators are shown to be consistent and asymptotically normal. Consistent estimations of the error variance are also developed. In addition, we propose a variable-selection procedure to variable selection in the parametric part. The procedure is an extension of the nonconcave penalized likelihood (Fan and Li in J Am Stat Assoc 85:1348--1360, 2001), which simultaneously selects the important variables and estimates the unknown parameters. The resulting estimate is shown to possess an oracle property. Extensive simulation studies are conducted to illustrate the finite sample performance of the proposed procedures.     

Integer autoregressive models with structural breaks

Even though integer-valued time series are common in practice, the methods for their analysis have been developed only in recent past. Several models for stationary processes with discrete marginal distributions have been proposed in the literature. Such processes assume the parameters of the model to remain constant throughout the time period. However, this need not be true in practice. In this paper, we introduce non-stationary integer-valued autoregressive (INAR) models with structural breaks to model a situation, where the parameters of the INAR process do not remain constant over time. Such models are useful while modelling count data time series with structural breaks. The Bayesian and Markov Chain Monte Carlo (MCMC) procedures for the estimation of the parameters and break points of such models are discussed. We illustrate the model and estimation procedure with the help of a simulation study. The proposed model is applied to the two real biometrical data sets.     

Fixed size confidence regions for parameters of threshold AR(1) models

For parameters of single and multiple threshold autoregressive models of order one, sequential procedures are proposed for constructing fixed size confidence ellipsoids. Sequential procedures are also proposed for constructing fixed proportional accuracy confidence ellipsoids and fixed width confidence intervals for linear combination of parameters. The confidence ellipsoids and intervals are shown to be asymptotically consistent and the associated stopping rules are shown to be asymptotically efficient as the size/width of the region becomes small.     

Model selection of generalized partially linear models with missing covariates

In this paper, a generalized partially linear model (GPLM) with missing covariates is studied and a Monte Carlo EM (MCEM) algorithm with penalized-spline (P-spline) technique is developed to estimate the regression coefficients and nonparametric function, respectively. As classical model selection procedures such as Akaike's information criterion become invalid for our considered models with incomplete data, some new model selection criterions for GPLMs with missing covariates are proposed under two different missingness mechanism, say, missing at random (MAR) and missing not at random (MNAR). The most attractive point of our method is that it is rather general and can be extended to various situations with missing observations based on EM algorithm, especially when no missing data involved, our new model selection criterions are reduced to classical AIC. Therefore, we can not only compare models with missing observations under MAR/MNAR settings, but also can compare missing data models with complete-data models simultaneously. Theoretical properties of the proposed estimator, including consistency of the model selection criterions are investigated. A simulation study and a real example are used to illustrate the proposed methodology.