A modified one-sample test for goodness-of-fit

This paper introduces a modified one-sample test of goodness-of-fit based on the cumulative distribution function. Damico [A new one-sample test for goodness-of-fit. Commun Stat – Theory Methods. 2004;33:181–193] proposed a test for testing goodness-of-fit of univariate distribution that uses the concept of partitioning the probability range into n intervals of equal probability mass 1/n and verifies that the hypothesized distribution evaluated at the observed data would place one case into each interval. The present paper extends this notion by allowing for m intervals of probability mass r/n, where r≥1 and n=m×r. A simulation study for small and moderate sample sizes demonstrates that the proposed test for two observations per interval under various alternatives is more powerful than the test proposed by Damico (2004).     

Control percentile test procedures for censored data

In life testing and survival analyses which involve the use of expensive equipment the cost of continuing an experiment until all the items on test have failed can be quite high. In these situations it is reasonable to make a statistical test when a pre-specified percentile, e.g. median of the control group has been observed. This article adapts some existing procedures for complete samples to randomly censored data. The results of Lo and Singh (1985) who extended the Bahadur representation of quantiles to the censored case enable us to use the methods of Gastwirth (1968) and Hettmansperger (1973) which were based on Bahadur's result to extend the procedures of Mathisen (1943), Gart (1963) and Slivka (1970).The large sample efficiency of the control median test is the same as that of Brookmeyer and Crowley's (1982) extension of the usual median test. For the two-sample shift problem with observations following the double-exponential law, the median remains the optimum percentile to use until the censoring becomes quite heavy. On the other hand, in the two-sample scale parameter problem for data from an exponential distribution the percentile (80th in the uncensored case) yielding the asymptotically most powerful test in the family of control percentile tests no longer is optimum. The effect becomes noticeable when 25% or more of the data is censored.     

On the robustness of the power function of the one-sample test for the negative exponential distribution

The robustness of the power function of the standard one-sample parametric test for the mean of the negative exponential distribution is examined. The main form of departure from the exponential assumption is a mixture of negative exponential components although an alternative Gamma distribution is also examined. It is found that the test is sensitive to these departures although the effect of mixtures with short tails is less dramatic than those with long tails.     

Some robust design strategies for percentile estimation in binary response models

For the problem of percentile estimation of a quantal response curve, the authors determine multiobjective designs which are robust with respect to misspecifications of the model assumptions. They propose a maximin approach based on efficiencies which leads to designs that are simultaneously efficient with respect to various choices of link functions and parameter regions. Furthermore, the authors deal with the problems of designing model and percentile robust experiments. They give various examples of such designs, which are calculated numerically.     

A one-sample adaptive distribution-free test with a stable power function

An asymptotically efficient combination of rank statistics with a variety of score functions is studied. The results of a Monte Carlo study show that the power function of the test for location is very stable across density types varying from heavy to light tails.     

Developing ridge estimation method for median regression

In this paper, the ridge estimation method is generalized to the median regression. Though the least absolute deviation (LAD) estimation method is robust in the presence of non-Gaussian or asymmetric error terms, it can still deteriorate into a severe multicollinearity problem when non-orthogonal explanatory variables are involved. The proposed method increases the efficiency of the LAD estimators by reducing the variance inflation and giving more room for the bias to get a smaller mean squared error of the LAD estimators. This paper includes an application of the new methodology and a simulation study as well.     

On the asymptotic distribution of cramer-von mises one-sample test statistics under an alternative

The asymptotic normality of the Cramer-von Mises one-sample test statistic and one of its variants under an alternative cdf is demonstrated. The derivation herein is unique in that it does not require knowledge of the theory of weak convergence of probability measures defined on metrized function spaces, and thus is accessible to a broader class of students and practitioners.     

Sparse estimation and inference for censored median regression

Censored median regression has proved useful for analyzing survival data in complicated situations, say, when the variance is heteroscedastic or the data contain outliers. In this paper, we study the sparse estimation for censored median regression models, which is an important problem for high dimensional survival data analysis. In particular, a new procedure is proposed to minimize an inverse-censoring-probability weighted least absolute deviation loss subject to the adaptive LASSO penalty and result in a sparse and robust median estimator. We show that, with a proper choice of the tuning parameter, the procedure can identify the underlying sparse model consistently and has desired large-sample properties including root-n consistency and the asymptotic normality. The procedure also enjoys great advantages in computation, since its entire solution path can be obtained efficiently. Furthermore, we propose a resampling method to estimate the variance of the estimator. The performance of the procedure is illustrated by extensive simulations and two real data applications including one microarray gene expression survival data.     

An optimal sign test for one-sample bivariate location model using an alternative bivariate ranked-set sample

The aim of this paper is to find an optimal alternative bivariate ranked-set sample for one-sample location model bivariate sign test. Our numerical and theoretical results indicated that the optimal designs for the bivariate sign test are the alternative designs with quantifying order statistics with labels {((r+1)/2, (r+1)/2)}, when the set size r is odd and {(r/2+1, r/2), (r/2, r/2+1)} when the set size r is even. The asymptotic distribution and Pitman efficiencies of these designs are derived. A simulation study is conducted to investigate the power of the proposed optimal designs. Illustration using real data with the Bootstrap algorithm for P-value estimation is used.     

New simulation results for the calibration and inverse median estimation problems

This paper gives the results of a new simulation study for the familiar calibration problem and the less familiar inverse median estimation problem. The latter arises when one wishes to estimate from a linear regression analysis the value of the independent variable corresponding to a specified value of the median of the dependent variable. For example, from the results of a regression analysis between stress and time to failure, one might wish to estimate the stress at which the median time to failure is 10,000 hours. In the study, the mean square error, Pitman closeness, and probability of overestimation are compared for both the calibration problem and the inverse median estimation problem for (1) the classical estimator, (2) the inverse estimator, and (3) a modified version of an estimator proposed by Naszodi (1978) for both a small sample and a moderately large sample situation.     

Interval estimation of the median effective dose for a logistic dose-response curve

In 1986, Williams showed how, assuming a logistic dose-response curve, one can construct a confidence interval for the median effective dose from the asymptotic likelihood ratio test. He gave reasons for preferring this likelihood ratio interval to the established interval calculated by applying Fieller's theorem to the maximum-likelihood estimates. Here, we assess the impact of applying a Bartlett adjustment to the likelihood ratio statistic and introduce the score test as an alternative approach for constructing a confidence interval for the median effective dose.     

A multivariate control median test

In this paper, we extend the univariate control median test to the multivariate case. We apply the permutation principle for the null distribution function of the test statistic and obtain a conditionally nonparametric test procedure. Because of the amount of computational work involved in implementing the test, we consider the normal approximation. We prove the consistency and derive the asymptotic efficiency of our control median test relative to Puri and Sen's median test. Finally, we compare the power of our control median test with those of Hotelling's T² test and Puri and Sen's median test through the simulations.     

A one-sample location test based on weighted averaging of two test statistics when the dimension and the sample size are large

We discuss a one-sample location test that can be used when the dimension and the sample size are large. It is well-known that the power of Hotelling’s test decreases when the dimension is close to the sample size. To address this loss of power, some non exact approaches were proposed, e.g., Dempster (1958 Dempster, A.P. (1958). A high dimensional two sample significance test. Ann. Math. Stat. 29:995–1010.[Crossref] , [Google Scholar], 1960 Dempster, A.P. (1960). A significance test for the separation of two highly multivariate small samples. Biometrics 16:41–50.[Crossref], [Web of Science ®] , [Google Scholar]), Bai and Saranadasa (1996 Bai, Z.D., Saranadasa, H. (1996). Effect of high dimension: by an example of a two sample problem. Stat. Sin. 6:311–329.[Web of Science ®] , [Google Scholar]), and Srivastava and Du (2008 Srivastava, M.S., Du, M. (2008). A test for the mean vector with fewer observations than the dimension. J. Multivariate Anal. 99:386–402.[Crossref], [Web of Science ®] , [Google Scholar]). In this article, we focus on Hotelling’s test and Dempster’s test. The comparative merits and demerits of these two tests vary according to the local parameters. In particular, we consider the situation where it is difficult to determine which test should be used, that is, where the two tests are asymptotically equivalent in terms of local power. We propose a new statistic based on the weighted averaging of Hotelling’s T²-statistic and Dempster’s statistic that can be applied in such a situation. Our weight is determined on the basis of the maximum local asymptotic power on a restricted parameter space that induces local asymptotic equivalence between Hotelling’s test and Dempster’s test. Numerical results show that our test is more stable than Hotelling’s T²-statistic and Dempster’s statistic in most parameter settings.     

Goodness-of-fit test for density estimation

It is often necessary to test whether X,…, X_n are from a certain density f(x) or not. Most test statistics such as the Kolmogorov-Smirnov, Cramer-von Mises, and Anderson-Darling statistics are based on the empirical distribution function F(x). In this paper we suggest a test statistic based on the integrated squared error of the kernel density estimator. We derive the asymptotic distribution of the statistic under the null and alternative hypothesis. Some simulation results for power comparisons are also given.     

On the one-sample location hypothesis for mixed bivariate data

We study a hypothesis testing problem involving the location model suggested by Olkin and Tate (1961). Specifically, we derive a likelihood ratio lest of the associated location hypothesis as an alternative to the conventional method of carrying out separate tests for each of the parameters. A small sample Monte Carlo comparison indicates the general superiority of the former in terms of statistical power. We also comment briefly on the properties of the test.     

Simulation methods for mean and median bias reduction in parametric estimation

The use of the iterated Bootstrap to find estimators that have the correct expectations is now standard. However when the distributions are skewed, or without means, the median makes more sense to us. This paper is primarily concerned with an algorithm that produces estimators whose median equals the unknown parameter.The method is illustrated by its application to four troublesome parametric estimation problems and a dataset.     

Normalized Johnson's transformation one-sample trimmed t for non-normality

The present study suggests the use of the normalized Johnson transformation trimmed t statistic in the one-sample case when the assumption of normality is violated. The performance of the proposed method was evaluated by Monte Carlo simulation, and was compared with the conventional Student t statistic, the trimmed t statistic and the normalized Johnson's transformation untrimmed t statistic respectively. The simulated results indicate that the proposed method can control type I error very well and that its power is greater than the other competitors for various conditions of non-normality. The method can be easily computer programmed and provides an alternative for the conventional t test.     

Preliminary test estimation for the second order autoregression

Consequences of preliminary test model identification procedures in time series analysis are examined in the context of a squared error risk function. Asymptotic risk comparisons and Monte Carlo studies are used in comparing these procedures.