Finite sample properties of an HPT estimator when each individual regression coefficient is estimated in a misspecified linear regression model

ABSTRACT

In this paper, assuming that there exist omitted variables in the specified model, we analytically derive the exact formula for the mean squared error (MSE) of a heterogeneous pre-test (HPT) estimator whose components are the ordinary least squares (OLS) and feasible ridge regression (FRR) estimators. Since we cannot examine the MSE performance analytically, we execute numerical evaluations to investigate small sample properties of the HPT estimator, and compare the MSE performance of the HPT estimator with those of the FRR estimator and the usual OLS estimator. Our numerical results show that (1) the HPT estimator is more efficient when the model misspecification is severe; (2) the HPT estimator with the optimal critical value obtained under the correctly specified model can be safely used even when there exist omitted variables in the specified model.     

A small sample estimator for a polynomial regression with errors in the variables

An adjusted least squares estimator, introduced by Cheng and Schneeweiss for consistently estimating a polynomial regression of any degree with errors in the variables, is modified such that it shows good results in small samples without losing its asymptotic properties for large samples. Simulation studies corroborate the theoretical findings.     

On small sample properties of the almost unbiased generalized ridge estimator

The purpose of this paper is to examine small sample properties of the operational almost unbiased generalized ridge estimator (E) . The exact first two moments of theAUGRE are derived. It is shown that although the reduction of the bias of the AUGRE is substantial, the AUGRE is rather inefficient than the generalized ridge estimator without the bias correction in a wide range of a noncen-trality parameter in terms of the mean square error.     

Some finite sample properties of generalized ridge regression estimators

In this paper we study the mean square error properties of the generalized ridge estimator. We obtain the exact and the approximate bias and the mean square error of the operational generalized ridge estimator in terms of G( ) functions. We show, among other things, that the operational generalized ridge estimator does not dominate the ordinary least squares estimator up to a certain order of approximation. Finally, we note that the iterative procedures to obtain coverging ridge estimators should be used with caution.     

Variance estimation of DEE and regression estimator when a first-phase cluster sample is restratified

We consider a variance estimation when a stratified single stage cluster sample is selected in the first phase and a stratified simple random element sample is selected in the second phase. We propose explicit formulas of (asymptotically), we propose explicit formulas of (asymptotically) unbiased variance estimators for the double expansion estimator and regression estimator. We perform a small simulation study to investigate the performance of the proposed variance estimators. In our simulation study, the proposed variance estimator showed better or comparable performance to the Jackknife variance estimator. We also extend the results to a two-phase sampling design in which a stratified pps with replacement cluster sample is selected in the first phase.     

Comment on a generalized stochastic restricted ridge regression estimator

In this note, we make some comments about the paper of Alheety and Kibria (2014 Alheety, M.I., Kibria, B.M.G. (2014). A generalized stochastic restricted ridge regression estimator. Commun. Stat. Theor. Meth. 43:4415–4427.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and correct the wrongly proved Theorems in that paper.     

The density function and the MSE dominance of the pre-test estimator in a heteroscedastic linear regression model with omitted variables

In this paper, we consider a heteroscedastic linear regression model with omitted variables. We derive the density function of the pre-test estimator consisting of the two-stage Aitken estimator (2SAE) and the ordinary least squares estimator (OLSE) after the pre-test for homoscedasticity. We also derive the first two moments based on the density function and show the sufficient condition for the pre-test estimator to dominate the 2SAE in terms of the MSE. Our numerical evaluations show that when this sufficient condition does not hold and when the magnitude of the specification error is large, the pre-test estimator can be dominated by the 2SAE, and further, the 2SAE can be dominated by the OLSE.     

The exact properties of the lawless and wang operational ridge regression estimator in a misspecified regression equation

The exact properties of the Lawless and Wang Operational Ridge Regression estimator are derived in the context of a misspecified regression equation.     

The feasible generalized restricted ridge regression estimator

The presence of autocorrelation in errors and multicollinearity among the regressors have undesirable effects on the least-squares regression. There are a wide range of methods which are proposed to overcome the usefulness of the ordinary least-squares estimator or the generalized least-squares estimator, such as the Stein-rule, restricted least-squares or ridge estimator. Therefore, we introduce a new feasible generalized restricted ridge regression (FGRR) estimator to examine multicollinearity and autocorrelation problems simultaneously for the general linear regression model. We also derive some statistical properties of the FGRR estimator and comparisons have been conducted using matrix mean-square error. Moreover, a Monte Carlo simulation experiment is performed to investigate the performance of the proposed estimator over the others.     

On the almost unbiased ridge regression estimator

The purpose of this paper is two-fold. One is to compare the almost unbiased generalized ridge regression (AUGRR) estimator proposed by Singh, Chaubey and Dwivedi (1986) with the generalized ridge regression (GRR) estimator and with the ordinary least squares (OLS) estimator in terms of the mean squared error criterion. Second is to examine small sample properties of the operational almost unbiased ordinary ridge regression (AUORR) estimator by Monte Carlo experiments.     

Cross validation of ridge regression estimator in autocorrelated linear regression models

ABSTRACT

In this paper, we investigated the cross validation measures, namely OCV, GCV and Cp under the linear regression models when the error structure is autocorrelated and regressor data are correlated. The best performed ridge regression estimator is obtained by getting the optimal ridge parameter so as to minimize these measures. A Monte Carlo simulation study is given to see how the optimal ridge parameter is affected by autocorrelation and the strength of multicollinearity.     

Two-parameter ridge estimator in the binary logistic regression

The binary logistic regression is a commonly used statistical method when the outcome variable is dichotomous or binary. The explanatory variables are correlated in some situations of the logit model. This problem is called multicollinearity. It is known that the variance of the maximum likelihood estimator (MLE) is inflated in the presence of multicollinearity. Therefore, in this study, we define a new two-parameter ridge estimator for the logistic regression model to decrease the variance and overcome multicollinearity problem. We compare the new estimator to the other well-known estimators by studying their mean squared error (MSE) properties. Moreover, a Monte Carlo simulation is designed to evaluate the performances of the estimators. Finally, a real data application is illustrated to show the applicability of the new method. According to the results of the simulation and real application, the new estimator outperforms the other estimators for all of the situations considered.     

On the ridge regression estimator with sub-space restriction

In the linear regression model with elliptical errors, a shrinkage ridge estimator is proposed. In this regard, the restricted ridge regression estimator under sub-space restriction is improved by incorporating a general function which satisfies Taylor’s series expansion. Approximate quadratic risk function of the proposed shrinkage ridge estimator is evaluated in the elliptical regression model. A Monte Carlo simulation study and analysis based on a real data example are considered for performance analysis. It is evident from the numerical results that the shrinkage ridge estimator performs better than both unrestricted and restricted estimators in the multivariate t-regression model, for some specific cases.     

Restricted ridge estimator in the logistic regression model

It is known that when the multicollinearity exists in the logistic regression model, variance of maximum likelihood estimator is unstable. As a remedy, Schaefer et al. presented a ridge estimator in the logistic regression model. Making use of the ridge estimator, when some linear restrictions are also present, we introduce a restricted ridge estimator in the logistic regression model. Statistical properties of this newly defined estimator will be studied and comparisons are done in the simulation study in the sense of mean squared error criterion. A real-data example and a simulation study are introduced to discuss the performance of this estimator.     

Small sample properties of the logit maximum likelihood estimator:a simulation study

This paper explores the effect of sample size, scale of parameters and size of the choice set on the maximum likelihood estimator of the parameters of the multinomial logit model. Data were generated by simulations under a three-way factorial experimental design for logit models containing three, four and five explanatory variables. Simulation data were analyzed by analysis of covariance and a regression model of the performance measure, the log root mean-squared error (LRMSE), fitted against the three factors and their interactions. Several important conclusions emerged. First, the LRMSE improves, but at a decreasing rate, with increases in the model's degrees of freedom. Second, the number of choice alternatives in the decision makers' choice sets has a significant impact on the LRMSE; however, heterogeneity in the choice sets across the sample has little or no impact. Finally, the scale of parameters and all of its two-way interactions with the other two factors significantly affect the LRMSE. Using the regression results, a family of iso-LRMSE curves are derived in the space of model degrees of freedom and scale of parameters. Their implications for researchers in choosing sample size and scale of parameters is discussed.     

A non stochastic ridge regression estimator and comparison with the James-Stein estimator

Abstract

This article presents a non-stochastic version of the Generalized Ridge Regression estimator that arises from a discussion of the properties of a Generalized Ridge Regression estimator whose shrinkage parameters are found to be close to their upper bounds. The resulting estimator takes the form of a shrinkage estimator that is superior to both the Ordinary Least Squares estimator and the James-Stein estimator under certain conditions. A numerical study is provided to investigate the range of signal to noise ratio under which the new estimator dominates the James-Stein estimator with respect to the prediction mean square error.     

The small sample properties of the restricted principal component regression estimator in linear regression model

In regression analysis, to deal with the problem of multicollinearity, the restricted principal components regression estimator is proposed. In this paper, we compared the restricted principal components regression estimator, the principal components regression estimator, and the ordinary least-squares estimator with each other under the Pitman's closeness criterion. We showed that the restricted principal components regression estimator is always superior to the principal components regression estimator, under certain conditions the restricted principal components regression estimator is superior to the ordinary least-squares estimator under the Pitman's closeness criterion and under certain conditions the principal components regression estimator is superior to the ordinary least-squares estimator under the Pitman's closeness criterion.     

Performance of ridge estimator in inverse Gaussian regression model

The presence of multicollinearity among the explanatory variables has undesirable effects on the maximum likelihood estimator (MLE). Ridge estimator (RE) is a widely used estimator in overcoming this issue. The RE enjoys the advantage that its mean squared error (MSE) is less than that of MLE. The inverse Gaussian regression (IGR) model is a well-known model in the application when the response variable positively skewed. The purpose of this paper is to derive the RE of the IGR under multicollinearity problem. In addition, the performance of this estimator is investigated under numerous methods for estimating the ridge parameter. Monte Carlo simulation results indicate that the suggested estimator performs better than the MLE estimator in terms of MSE. Furthermore, a real chemometrics dataset application is utilized and the results demonstrate the excellent performance of the suggested estimator when the multicollinearity is present in IGR model.     

On exact small sample properties of the minimax generalized ridge regression estimators

The purpose of this paper is to compare sampling performance of the minimax generalized ridge regression estimators considered by Casella (1985) with that of ordinary least squares estimator by numerical calculations of exact mean squared error of these estimators.