Likelihood-Based Inference for Weak Exogeneity in I(2) Cointegrated VAR Models

This article develops limit theory for likelihood analysis of weak exogeneity in I(2) cointegrated vector autoregressive (VAR) models incorporating deterministic terms. Conditions for weak exogeneity in I(2) VAR models are reviewed, and the asymptotic properties of conditional maximum likelihood estimators and a likelihood-based weak exogeneity test are then investigated. It is demonstrated that weak exogeneity in I(2) VAR models allows us to conduct asymptotic conditional inference based on mixed Gaussian distributions. It is then proved that a log-likelihood ratio test statistic for weak exogeneity in I(2) VAR models is asymptotically χ² distributed. The article also presents an empirical illustration of the proposed test for weak exogeneity using Japan's macroeconomic data.     

A note on optimal and robust spacing selection

The problem of quantile selection for the asymptotically best linear unbiased estimators of location and scale parameters is considered. The asymptotic properties of several quantile selection methods for simultaneous parameter estimation are derived and simple approximate solutions are provided. A robust scheme for quantile selection is also developed.     

Regression spline bivariate probit models: A practical approach to testing for exogeneity

Bivariate probit models can deal with a problem usually known as endogeneity. This issue is likely to arise in observational studies when confounders are unobserved. We are concerned with testing the hypothesis of exogeneity (or absence of endogeneity) when using regression spline recursive and sample selection bivariate probit models. Likelihood ratio and gradient tests are discussed in this context and their empirical properties investigated and compared with those of the Lagrange multiplier and Wald tests through a Monte Carlo study. The tests are illustrated using two datasets in which the hypothesis of exogeneity needs to be tested.     

A new model selection procedure based on dynamic quantile regression

In this article, we propose a novel robust data-analytic procedure, dynamic quantile regression (DQR), for model selection. It is robust in the sense that it can simultaneously estimate the coefficients and the distribution of errors over a large collection of error distributions even those that are heavy-tailed and may not even possess variances or means; and DQR is easy to implement in the sense that it does not need to decide in advance which quantile(s) should be gathered. Asymptotic properties of related estimators are derived. Simulations and illustrative real examples are also given.     

Variable selection of the quantile varying coefficient regression models

As a useful supplement to mean regression, quantile regression is a completely distribution-free approach and is more robust to heavy-tailed random errors. In this paper, a variable selection procedure for quantile varying coefficient models is proposed by combining local polynomial smoothing with adaptive group LASSO. With an appropriate selection of tuning parameters by the BIC criterion, the theoretical properties of the new procedure, including consistency in variable selection and the oracle property in estimation, are established. The finite sample performance of the newly proposed method is investigated through simulation studies and the analysis of Boston house price data. Numerical studies confirm that the newly proposed procedure (QKLASSO) has both robustness and efficiency for varying coefficient models irrespective of error distribution, which is a good alternative and necessary supplement to the KLASSO method.     

Testing exogeneity in overidentified models

Summary In this paper we analyse the consequences of model overidentification on testing exogeneity, when maximum likelihood techniques for estimation and inference are used. This situation is viewed as a particular case of the more general problem of considering how restrictions on nuisance parameters could help in making inference on the parameters of interest. At first a general model is considered. A suitable likelihood function factorization is used which allows a simple derivation of the information matrix and others tools useful for building up joint tests of exogeneity and overidentifying restrictions both of Wald and Lagrange Multiplier type. The asymptotic local power of the exogeneity test in the justidentified model is compared with that in the overidentified one, when we assume that the latter is the true model. Then the pseudo-likelihood framework is used to derive the consequences of working with a model where overidentifying restrictions are erroneously imposed. The inconsistency introduced by imposing false restrictions is analysed and the consequences of the misspecification on the exogeneity test are carefully examined.     

Randomized quantile regression estimation for heteroskedastic non parametric model

In this paper, we propose robust randomized quantile regression estimators for the mean and (condition) variance functions of the popular heteroskedastic non parametric regression model. Unlike classical approaches which consider quantile as a fixed quantity, our method treats quantile as a uniformly distributed random variable. Our proposed method can be employed to estimate the error distribution, which could significantly improve prediction results. An automatic bandwidth selection scheme will be discussed. Asymptotic properties and relative efficiencies of the proposed estimators are investigated. Our empirical results show that the proposed estimators work well even for random errors with infinite variances. Various numerical simulations and two real data examples are used to demonstrate our methodologies.     

Robust estimation for functional coefficient regression models with spatial data

A global smoothing procedure is developed using B-spline function approximation for estimating the unknown functions of a functional coefficient regression model with spatial data. A general formulation is used to treat mean regression, median regression, quantile regression and robust mean regression in one setting. The global convergence rates of the estimators of unknown coefficient functions are established. Various applications of the main results, including estimating conditional quantile coefficient functions and robustifying the mean regression coefficient functions are given. Finite sample properties of our procedures are studied through Monte Carlo simulations. A housing data example is used to illustrate the proposed methodology.     

Weighted quantile regression and testing for varying-coefficient models with randomly truncated data

This paper develops a varying-coefficient approach to the estimation and testing of regression quantiles under randomly truncated data. In order to handle the truncated data, the random weights are introduced and the weighted quantile regression (WQR) estimators for nonparametric functions are proposed. To achieve nice efficiency properties, we further develop a weighted composite quantile regression (WCQR) estimation method for nonparametric functions in varying-coefficient models. The asymptotic properties both for the proposed WQR and WCQR estimators are established. In addition, we propose a novel bootstrap-based test procedure to test whether the nonparametric functions in varying-coefficient quantile models can be specified by some function forms. The performance of the proposed estimators and test procedure are investigated through simulation studies and a real data example.     

Quantile regression for robust inference on varying coefficient partially nonlinear models

In this paper, we propose a robust statistical inference approach for the varying coefficient partially nonlinear models based on quantile regression. A three-stage estimation procedure is developed to estimate the parameter and coefficient functions involved in the model. Under some mild regularity conditions, the asymptotic properties of the resulted estimators are established. Some simulation studies are conducted to evaluate the finite performance as well as the robustness of our proposed quantile regression method versus the well known profile least squares estimation procedure. Moreover, the Boston housing price data is given to further illustrate the application of the new method.     

Quantile regression in longitudinal studies with dropouts and measurement errors

ABSTRACT

Quantile regression models, as an important tool in practice, can describe effects of risk factors on the entire conditional distribution of the response variable with its estimates robust to outliers. However, there is few discussion on quantile regression for longitudinal data with both missing responses and measurement errors, which are commonly seen in practice. We develop a weighted and bias-corrected quantile loss function for the quantile regression with longitudinal data, which allows both missingness and measurement errors. Additionally, we establish the asymptotic properties of the proposed estimator. Simulation studies demonstrate the expected performance in correcting the bias resulted from missingness and measurement errors. Finally, we investigate the Lifestyle Education for Activity and Nutrition study and confirm the effective of intervention in producing weight loss after nine month at the high quantile.     

Focused Information Criterion and Model Averaging in Quantile Regression

In this article, we study model selection and model averaging in quantile regression. Under general conditions, we develop a focused information criterion and a frequentist model average estimator for the parameters in quantile regression model, and examine their theoretical properties. The new procedures provide a robust alternative to the least squares method or likelihood method, and a major advantage of the proposed procedures is that when the variance of random error is infinite, the proposed procedure works beautifully while the least squares method breaks down. A simulation study and a real data example are presented to show that the proposed method performs well with a finite sample and is easy to use in practice.     

Nonparametric Inference for Time-Varying Coefficient Quantile Regression

The article considers nonparametric inference for quantile regression models with time-varying coefficients. The errors and covariates of the regression are assumed to belong to a general class of locally stationary processes and are allowed to be cross-dependent. Simultaneous confidence tubes (SCTs) and integrated squared difference tests (ISDTs) are proposed for simultaneous nonparametric inference of the latter models with asymptotically correct coverage probabilities and Type I error rates. Our methodologies are shown to possess certain asymptotically optimal properties. Furthermore, we propose an information criterion that performs consistent model selection for nonparametric quantile regression models of nonstationary time series. For implementation, a wild bootstrap procedure is proposed, which is shown to be robust to the dependent and nonstationary data structure. Our method is applied to studying the asymmetric and time-varying dynamic structures of the U.S. unemployment rate since the 1940s. Supplementary materials for this article are available online.     

Asymptotic Normality of M-Estimators for Varying Coefficient Models with Longitudinal Data

This article considers a nonparametric varying coefficient regression model with longitudinal observations. The relationship between the dependent variable and the covariates is assumed to be linear at a specific time point, but the coefficients are allowed to change over time. A general formulation is used to treat mean regression, median regression, quantile regression, and robust mean regression in one setting. The local M-estimators of the unknown coefficient functions are obtained by local linear method. The asymptotic distributions of M-estimators of unknown coefficient functions at both interior and boundary points are established. Various applications of the main results, including estimating conditional quantile coefficient functions and robustifying the mean regression coefficient functions are derived. Finite sample properties of our procedures are studied through Monte Carlo simulations.     

Composite kernel quantile regression

The composite quantile regression (CQR) has been developed for the robust and efficient estimation of regression coefficients in a liner regression model. By employing the idea of the CQR, we propose a new regression method, called composite kernel quantile regression (CKQR), which uses the sum of multiple check functions as a loss in reproducing kernel Hilbert spaces for the robust estimation of a nonlinear regression function. The numerical results demonstrate the usefulness of the proposed CKQR in estimating both conditional nonlinear mean and quantile functions.     

Doubly robust weighted composite quantile regression based on SCAD-L2

In this article, a robust variable selection procedure based on the weighted composite quantile regression (WCQR) is proposed. Compared with the composite quantile regression (CQR), WCQR is robust to heavy-tailed errors and outliers in the explanatory variables. For the choice of the weights in the WCQR, we employ a weighting scheme based on the principal component method. To select variables with grouping effect, we consider WCQR with SCAD-L₂ penalization. Furthermore, under some suitable assumptions, the theoretical properties, including the consistency and oracle property of the estimator, are established with a diverging number of parameters. In addition, we study the numerical performance of the proposed method in the case of ultrahigh-dimensional data. Simulation studies and real examples are provided to demonstrate the superiority of our method over the CQR method when there are outliers in the explanatory variables and/or the random error is from a heavy-tailed distribution.     

A robust test for asymptotic independence of bivariate extremes

We show that the existing tests for asymptotic independence are sensitive to outliers. A robust test is proposed. The new test is made stable under contamination through a shrinkage scheme. Simulations show that the new test performs well in the presence of contaminated data while maintaining good properties when there is no contamination. An application to real data shows the added value of our new robust approach.     

Smoothing combined estimating equations in quantile regression for longitudinal data

Quantile regression has become a powerful complement to the usual mean regression. A simple approach to use quantile regression in marginal analysis of longitudinal data is to assume working independence. However, this may incur potential efficiency loss. On the other hand, correctly specifying a working correlation in quantile regression can be difficult. We propose a new quantile regression model by combining multiple sets of unbiased estimating equations. This approach can account for correlations between the repeated measurements and produce more efficient estimates. Because the objective function is discrete and non-convex, we propose induced smoothing for fast and accurate computation of the parameter estimates, as well as their asymptotic covariance, using Newton-Raphson iteration. We further develop a robust quantile rank score test for hypothesis testing. We show that the resulting estimate is asymptotically normal and more efficient than the simple estimate using working independence. Extensive simulations and a real data analysis show the usefulness of the method.     

The finite-sample performance of robust unit root tests

This paper investigates the relative small sample performance of several robust unit root tests by means of a simulation study. It is confirmed that the traditional least-squares based Dickey-Fuller test has substantially lower power than several robust alternatives if the error distribution is fat-tailed while its power gain is small at the normal model. Particularly good results are achieved by a quasi-maximum likelihood test. However, all robust tests under consideration exhibit severe size distortions if the disturbances follow a skewed distribution. Moreover, under additive outliers, robust tests fail to produce stable sizes and good power properties. Consequently, the value of using robust unit root tests depends heavily of the type of nonnormality at hand.