Estimating the distribution function using k-tuple ranked set samples

The basic assumption underlying the concept of ranked set sampling is that actual measurement of units is expensive, whereas ranking is cheap. This may not be true in reality in certain cases where ranking may be moderately expensive. In such situations, based on total cost considerations, k-tuple ranked set sampling is known to be a viable alternative, where one selects k units (instead of one) from each ranked set. In this article, we consider estimation of the distribution function based on k-tuple ranked set samples when the cost of selecting and ranking units is not ignorable. We investigate estimation both in the balanced and unbalanced data case. Properties of the estimation procedure in the presence of ranking error are also investigated. Results of simulation studies as well as an application to a real data set are presented to illustrate some of the theoretical findings.     

Estimation of Population Variance from Multi-ranker Ranked Set Sampling Designs

In this article, we develop an estimator for a population variance based on a multi-ranker ranked set sampling design. In a multi-ranker design, the units are ranked by more than one ranker allowing ties whenever the confidence level of the rankers is low. The ranking information of all rankers is then combined in a meaningful way to create a single measure. This measure is used to construct the sampling design and a new estimator for the population variance. The article investigates the bias and relative efficiency of the proposed variance estimator. It is shown that the new estimator performs as good as or better than its competitors in the literature.     

Efficiency of ranked set sampling in entropy estimation and goodness-of-fit testing for the inverse Gaussian law

When measuring units are expensive or time consuming, while ranking them is relatively easy and inexpensive, it is known that ranked set sampling (RSS) is preferable to simple random sampling (SRS). Many authors have suggested several extensions of RSS. As a variation, Al-Saleh and Al-Kadiri [Double ranked set sampling, Statist. Probab. Lett. 48 (2000), pp. 205–212] introduced double ranked set sampling (DRSS) and it was extended by Al-Saleh and Al-Omari [Multistage ranked set sampling, J. Statist. Plann. Inference 102 (2002), pp. 273–286] to multistage ranked set sampling (MSRSS). The entropy of a random variable (r.v.) is a measure of its uncertainty. It is a measure of the amount of information required on the average to determine the value of a (discrete) r.v.. In this work, we discuss entropy estimation in RSS design and aforementioned extensions and compare the results with those in SRS design in terms of bias and root mean square error (RMSE). Motivated by the above observed efficiency, we continue to investigate entropy-based goodness-of-fit test for the inverse Gaussian distribution using RSS. Critical values for some sample sizes determined by means of Monte Carlo simulations are presented for each design. A Monte Carlo power analysis is performed under various alternative hypotheses in order to compare the proposed testing procedure with the existing methods. The results indicate that tests based on RSS and its extensions are superior alternatives to the entropy test based on SRS.     

Smoothed empirical likelihood confidence intervals for the relative distribution with left‐truncated and right‐censored data

The study of differences among groups is an interesting statistical topic in many applied fields. It is very common in this context to have data that are subject to mechanisms of loss of information, such as censoring and truncation. In the setting of a two‐sample problem with data subject to left truncation and right censoring, we develop an empirical likelihood method to do inference for the relative distribution. We obtain a nonparametric generalization of Wilks' theorem and construct nonparametric pointwise confidence intervals for the relative distribution. Finally, we analyse the coverage probability and length of these confidence intervals through a simulation study and illustrate their use with a real data set on gastric cancer. The Canadian Journal of Statistics 38: 453–473; 2010 © 2010 Statistical Society of Canada     

Efficient estimators for adaptive stratified sequential sampling

In stratified sampling, methods for the allocation of effort among strata usually rely on some measure of within-stratum variance. If we do not have enough information about these variances, adaptive allocation can be used. In adaptive allocation designs, surveys are conducted in two phases. Information from the first phase is used to allocate the remaining units among the strata in the second phase. Brown et al. [Adaptive two-stage sequential sampling, Popul. Ecol. 50 (2008), pp. 239–245] introduced an adaptive allocation sampling design – where the final sample size was random – and an unbiased estimator. Here, we derive an unbiased variance estimator for the design, and consider a related design where the final sample size is fixed. Having a fixed final sample size can make survey-planning easier. We introduce a biased Horvitz–Thompson type estimator and a biased sample mean type estimator for the sampling designs. We conduct two simulation studies on honey producers in Kurdistan and synthetic zirconium distribution in a region on the moon. Results show that the introduced estimators are more efficient than the available estimators for both variable and fixed sample size designs, and the conventional unbiased estimator of stratified simple random sampling design. In order to evaluate efficiencies of the introduced designs and their estimator furthermore, we first review some well-known adaptive allocation designs and compare their estimator with the introduced estimators. Simulation results show that the introduced estimators are more efficient than available estimators of these well-known adaptive allocation designs.     

Quantile inference based on partially rank-ordered set samples

This paper develops statistical inference for population quantiles based on a partially rank-ordered set (PROS) sample design. A PROS sample design is similar to a ranked set sample with some clear differences. This design first creates partially rank-ordered subsets by allowing ties whenever the units in a set cannot be ranked with high confidence. It then selects a unit for full measurement at random from one of these partially rank-ordered subsets. The paper develops a point estimator, confidence interval and hypothesis testing procedure for the population quantile of order p. Exact, as well as asymptotic, distribution of the test statistic is derived. It is shown that the null distribution of the test statistic is distribution-free, and statistical inference is reasonably robust against possible ranking errors in ranking process.     

Distribution‐free statistical intervals via ranked‐set sampling

The author shows how to construct distribution‐free statistical intervals from ranked‐set sampling. He considers the cases of confidence, tolerance, and prediction intervals. He shows how to compute their coverage probabilities and he compares their performance to that of intervals based on simple random sampling. He finds that the ranked‐set sampling‐based intervals are at least as good as their classical counterpart in most settings of interest, although the nature of the advantage depends on the type of interval considered.     

Rank regression in order restricted randomised designs

This paper uses order restricted randomised design (ORRD) to create a judgment ranked blocking factor based on available subjective information in a small set of experimental units (EUs). The design then performs a carefully designed randomisation scheme with certain restriction to assign the treatment levels to EUs across these subjective judgment blocks. Such an assignment induces positive dependence among within-set units, and the restrictions on the randomisation translate this positive dependence into a variance reduction technique. We provide a unified theory to analyse the data sets collected from an ORRD. The analysis uses the general framework of rank regression methodology in linear models, with some modification to our randomisation scheme, to estimate regression parameter and to test general linear hypotheses. It is shown that the estimators and test statistics have limiting normal and chi-square distributions regardless the quality of ranking information. A simulation study shows that the asymptotic results remain valid even for relatively small sample sizes. The proposed tests are applied to a clinical trial data set.     

Ordered ranked set samples and applications to inference

Ranked set sampling (RSS) was first proposed by McIntyre [1952. A method for unbiased selective sampling, using ranked sets. Australian J. Agricultural Res. 3, 385–390] as an effective way to estimate the unknown population mean. Chuiv and Sinha [1998. On some aspects of ranked set sampling in parametric estimation. In: Balakrishnan, N., Rao, C.R. (Eds.), Handbook of Statistics, vol. 17. Elsevier, Amsterdam, pp. 337–377] and Chen et al. [2004. Ranked Set Sampling—Theory and Application. Lecture Notes in Statistics, vol. 176. Springer, New York] have provided excellent surveys of RSS and various inferential results based on RSS. In this paper, we use the idea of order statistics from independent and non-identically distributed (INID) random variables to propose ordered ranked set sampling (ORSS) and then develop optimal linear inference based on ORSS. We determine the best linear unbiased estimators based on ORSS (BLUE-ORSS) and show that they are more efficient than BLUE-RSS for the two-parameter exponential, normal and logistic distributions. Although this is not the case for the one-parameter exponential distribution, the relative efficiency of the BLUE-ORSS (to BLUE-RSS) is very close to 1. Furthermore, we compare both BLUE-ORSS and BLUE-RSS with the BLUE based on order statistics from a simple random sample (BLUE-OS). We show that BLUE-ORSS is uniformly better than BLUE-OS, while BLUE-RSS is not as efficient as BLUE-OS for small sample sizes (n<5$n<5$).     

D‐optimal minimax fractional factorial designs

The D‐optimal minimax criterion is proposed to construct fractional factorial designs. The resulting designs are very efficient, and robust against misspecification of the effects in the linear model. The criterion was first proposed by Wilmut & Zhou (2011); their work is limited to two‐level factorial designs, however. In this paper we extend this criterion to designs with factors having any levels (including mixed levels) and explore several important properties of this criterion. Theoretical results are obtained for construction of fractional factorial designs in general. This minimax criterion is not only scale invariant, but also invariant under level permutations. Moreover, it can be applied to any run size. This is an advantage over some other existing criteria. The Canadian Journal of Statistics 41: 325–340; 2013 © 2013 Statistical Society of Canada     

Empirical likelihood‐based inferences for a low income proportion

Low income proportion is an important index in comparisons of poverty in countries around the world. The stability of a society depends heavily on this index. An accurate and reliable estimation of this index plays an important role for government's economic policies. In this paper, the authors study empirical likelihood‐based inferences for a low income proportion under the simple random sampling and stratified random sampling designs. It is shown that the limiting distributions of the empirical likelihood ratios for the low income proportion are the scaled chi‐square distributions. The authors propose various empirical likelihood‐based confidence intervals for the low income proportion. Extensive simulation studies are conducted to evaluate the relative performance of the normal approximation‐based interval, bootstrap‐based intervals, and the empirical likelihood‐based intervals. The proposed methods are also applied to analyzing a real economic survey income dataset. The Canadian Journal of Statistics 39: 1–16; 2011 ©2011 Statistical Society of Canada     

Estimation with right‐censored observations under a semi‐Markov model

The semi‐Markov process often provides a better framework than the classical Markov process for the analysis of events with multiple states. The purpose of this paper is twofold. First, we show that in the presence of right censoring, when the right end‐point of the support of the censoring time is strictly less than the right end‐point of the support of the semi‐Markov kernel, the transition probability of the semi‐Markov process is nonidentifiable, and the estimators proposed in the literature are inconsistent in general. We derive the set of all attainable values for the transition probability based on the censored data, and we propose a nonparametric inference procedure for the transition probability using this set. Second, the conventional approach to constructing confidence bands is not applicable for the semi‐Markov kernel and the sojourn time distribution. We propose new perturbation resampling methods to construct these confidence bands. Different weights and transformations are explored in the construction. We use simulation to examine our proposals and illustrate them with hospitalization data from a recent cancer survivor study. The Canadian Journal of Statistics 41: 237–256; 2013 © 2013 Statistical Society of Canada     

The pseudo‐GEE approach to the analysis of longitudinal surveys

Longitudinal surveys have emerged in recent years as an important data collection tool for population studies where the primary interest is to examine population changes over time at the individual level. Longitudinal data are often analyzed through the generalized estimating equations (GEE) approach. The vast majority of existing literature on the GEE method; however, is developed under non‐survey settings and are inappropriate for data collected through complex sampling designs. In this paper the authors develop a pseudo‐GEE approach for the analysis of survey data. They show that survey weights must and can be appropriately accounted in the GEE method under a joint randomization framework. The consistency of the resulting pseudo‐GEE estimators is established under the proposed framework. Linearization variance estimators are developed for the pseudo‐GEE estimators when the finite population sampling fractions are small or negligible, a scenario often held for large‐scale surveys. Finite sample performances of the proposed estimators are investigated through an extensive simulation study using data from the National Longitudinal Survey of Children and Youth. The results show that the pseudo‐GEE estimators and the linearization variance estimators perform well under several sampling designs and for both continuous and binary responses. The Canadian Journal of Statistics 38: 540–554; 2010 © 2010 Statistical Society of Canada     

An omnibus two-sample test for ranked-set sampling data

We develop an omnibus two-sample test for ranked-set sampling (RSS) data. The test statistic is the conditional probability of seeing the observed sequence of ranks in the combined sample, given the observed sequences within the separate samples. We compare the test to existing tests under perfect rankings, finding that it can outperform existing tests in terms of power, particularly when the set size is large. The test does not maintain its level under imperfect rankings. However, one can create a permutation version of the test that is comparable in power to the basic test under perfect rankings and also maintains its level under imperfect rankings. Both tests extend naturally to judgment post-stratification, unbalanced RSS, and even RSS with multiple set sizes. Interestingly, the tests have no simple random sampling analog.     

Unconditional empirical likelihood approach for analytic use of public survey data

Modeling survey data often requires having the knowledge of design and weighting variables. With public-use survey data, some of these variables may not be available for confidentiality reasons. The proposed approach can be used in this situation, as long as calibrated weights and variables specifying the strata and primary sampling units are available. It gives consistent point estimation and a pivotal statistics for testing and confidence intervals. The proposed approach does not rely on with-replacement sampling, single-stage, negligible sampling fractions, or noninformative sampling. Adjustments based on design effects, eigenvalues, joint-inclusion probabilities or bootstrap, are not needed. The inclusion probabilities and auxiliary variables do not have to be known. Multistage designs with unequal selection of primary sampling units are considered. Nonresponse can be easily accommodated if the calibrated weights include reweighting adjustment for nonresponse. We use an unconditional approach, where the variables and sample are random variables. The design can be informative.     

An adaptive sampling scheme guided by BART—with an application to predict processor performance

The evaluation of new processor designs is an important issue in electrical and computer engineering. Architects use simulations to evaluate designs and to understand trade‐offs and interactions among design parameters. However, due to the lengthy simulation time and limited resources, it is often practically impossible to simulate a full factorial design space. Effective sampling methods and predictive models are required. In this paper, the authors propose an automated performance predictive approach which employs an adaptive sampling scheme that interactively works with the predictive model to select samples for simulation. These samples are then used to build Bayesian additive regression trees, which in turn are used to predict the whole design space. Both real data analysis and simulation studies show that the method is effective in that, though sampling at very few design points, it generates highly accurate predictions on the unsampled points. Furthermore, the proposed model provides quantitative interpretation tools with which investigators can efficiently tune design parameters in order to improve processor performance. The Canadian Journal of Statistics 38: 136–152; 2010 © 2010 Statistical Society of Canada     

Regression analysis for a summed missing data problem under an outcome‐dependent sampling scheme

In this paper, we consider a regression analysis for a missing data problem in which the variables of primary interest are unobserved under a general biased sampling scheme, an outcome‐dependent sampling (ODS) design. We propose a semiparametric empirical likelihood method for accessing the association between a continuous outcome response and unobservable interesting factors. Simulation study results show that ODS design can produce more efficient estimators than the simple random design of the same sample size. We demonstrate the proposed approach with a data set from an environmental study for the genetic effects on human lung function in COPD smokers. The Canadian Journal of Statistics 40: 282–303; 2012 © 2012 Statistical Society of Canada     

Locally optimal designs for binary dose‐response models

In this article, we consider the problem of seeking locally optimal designs for nonlinear dose‐response models with binary outcomes. Applying the theory of Tchebycheff Systems and other algebraic tools, we show that the locally D‐, A‐, and c‐optimal designs for three binary dose‐response models are minimally supported in finite, closed design intervals. The methods to obtain such designs are presented along with examples. The efficiencies of these designs are also discussed. The Canadian Journal of Statistics 46: 336–354; 2018 © 2018 Statistical Society of Canada     

Performances of some goodness-of-fit tests for sampling designs in ranked set sampling

In this study, we consider different sampling designs of ranked set sampling (RSS) and give empirical distribution function (EDF) estimators for each sampling designs. We provide comparative graphs for the EDFs. Using these EDFs, power of five goodness-of-fit tests are obtained by Monte Carlo simulations for Tukey's g–h distributions under RSS and simple random sampling (SRS). Performances of these tests are compared with the tests based on the SRS. Also, critical values belong to these tests are obtained for different set and cycle sizes.     

An improved ranked set two‐sample mann‐whitney‐wilcoxon test

The authors present an improved ranked set two‐sample Mann‐Whitney‐Wilcoxon test for a location shift between samples from two distributions F and G. They define a function that measures the amount of information provided by each observation from the two samples, given the actual joint ranking of all the units in a set. This information function is used as a guide for improving the Pitman efficacy of the Mann‐Whitney‐Wilcoxon test. When the underlying distributions are symmetric, observations at their mode(s) must be quantified in order to gain efficiency. Analogous results are provided for asymmetric distributions.