multiple and conditional deletion diagnostics for general linear models

In this paper we develop multiple case deletion statistics for the general linear model so that a residual vector and a leverage matrix are identified which have roles analogous to residuals and leverage for ordinary least squares models. We extend the notion of the conditional deletion diagnostic to general linear models. The residuals, leverage and deletion diagnostics are illustrated with data modelled by a linear growth curve.     

Theory & Methods: Residual Diagnostic Plots for Checking for Model Mis‐specification in Time Series Regression

This paper considers residuals for time series regression. Despite much literature on visual diagnostics for uncorrelated data, there is little on the autocorrelated case. To examine various aspects of the fitted time series regression model, three residuals are considered. The fitted regression model can be checked using orthogonal residuals; the time series error model can be analysed using marginal residuals; and the white noise error component can be tested using conditional residuals. When used together, these residuals allow identification of outliers, model mis‐specification and mean shifts. Due to the sensitivity of conditional residuals to model mis‐specification, it is suggested that the orthogonal and marginal residuals be examined first.     

A Simple Derivation of Deletion Diagnostic Results for the General Linear Model with Correlated Errors

A general, simple and intuitive derivation is provided for diagnostics associated with the deletion of arbitrary subsets for the linear model with general covariance structure. These are seen to be most simply expressed, even for the well-studied case of independent and identically distributed data, in terms of a residual known variously as the conditional residual, the deletion prediction residual and the cross-validation residual. Particularly simple specializations arise when the subsets are of size 1 and of size 2, but the method is easy to apply for all subsets and to conditional deletions.     

Ancillarity properties of generalized residuals with applications in failure time models

This paper addresses the issue of when residuals from failure time models, which are useful in model validation and diagnostics, possess a conditional ancillarity property. This property states that the distribution of the residuals depends on the model parameters only through a many-to-one function of these parameters, which in certain models turn out to be the censoring proportion. Concrete results are obtained for models which possess an invariance structure, and these results are applied to commonly used failure time models. Aside from furthering our understanding of the distributional structure of residuals, this conditional ancillarity property can be exploited to study in a more efficient manner the distributional properties of residuals either analytically and/or through numerical methods.     

On diagnostic checking of the autoregressive conditional intensity model

The autoregressive conditional intensity model proposed by Russell (1998) is a promising option for fitting multivariate high frequency irregularly spaced data. The authors acknowledge the validity of this model by showing the independence of its generalized residuals, a crucial assumption of the model formulation not readily recognized by researchers. The authors derive the large‐sample distribution of the autocorrelations of the generalized residual series and use it to construct a goodness‐of‐fit test for the model. Empirical results compare the performance of their test with other off‐the‐shelf tests such as the Ljung–Box test. They illustrate the use of their test with transaction records of the HSBC stock.     

Confidence Intervals for Conditional Tail Risk Measures in ARMA–GARCH Models

ABSTRACT

ARMA–GARCH models are widely used to model the conditional mean and conditional variance dynamics of returns on risky assets. Empirical results suggest heavy-tailed innovations with positive extreme value index for these models. Hence, one may use extreme value theory to estimate extreme quantiles of residuals. Using weak convergence of the weighted sequential tail empirical process of the residuals, we derive the limiting distribution of extreme conditional Value-at-Risk (CVaR) and conditional expected shortfall (CES) estimates for a wide range of extreme value index estimators. To construct confidence intervals, we propose to use self-normalization. This leads to improved coverage vis-à-vis the normal approximation, while delivering slightly wider confidence intervals. A data-driven choice of the number of upper order statistics in the estimation is suggested and shown to work well in simulations. An application to stock index returns documents the improvements of CVaR and CES forecasts.     

Granger-causal analysis of GARCH models: A Bayesian approach

A multivariate GARCH model is used to investigate Granger causality in the conditional variance of time series. Parametric restrictions for the hypothesis of noncausality in conditional variances between two groups of variables, when there are other variables in the system as well, are derived. These novel conditions are convenient for the analysis of potentially large systems of economic variables. To evaluate hypotheses of noncausality, a Bayesian testing procedure is proposed. It avoids the singularity problem that may appear in the Wald test, and it relaxes the assumption of the existence of higher-order moments of the residuals required in classical tests.     

On General Multivariate Mixture Models

In this article, we focus our attention on the general multivariate mixture model. We drive the relationship between the conditional and the unconditional reliability measures such as the hazard gradient, reversed hazard gradient, multivariate mean residual life, and multivariate reversed mean residual life. We present some sufficient conditions under which we can stochastically compare those vectors of general multivariate mixture models in the senses of various stochastic orderings.     

Non-Gaussian Conditional Linear AR(1) Models

This paper gives a general formulation of a non-Gaussian conditional linear AR(1) model subsuming most of the non-Gaussian AR(1) models that have appeared in the literature. It derives some general results giving properties for the stationary process mean, variance and correlation structure, and conditions for stationarity. These results highlight similarities with and differences from the Gaussian AR(1) model, and unify many separate results appearing in the literature. Examples illustrate the wide range of properties that can appear under the conditional linear autoregressive assumption. These results are used in analysing three real datasets, illustrating general methods of estimation, model diagnostics and model selection. In particular, the theoretical results can be used to develop diagnostics for deciding if a time series can be modelled by some linear autoregressive model, and for selecting among several candidate models.     

On testing for multivariate ARCH effects in vector time series models

Using a spectral approach, the authors propose tests to detect multivariate ARCH effects in the residuals from a multivariate regression model. The tests are based on a comparison, via a quadratic norm, between the uniform density and a kernel‐based spectral density estimator of the squared residuals and cross products of residuals. The proposed tests are consistent under an arbitrary fixed alternative. The authors present a new application of the test due to Hosking (1980) which is seen to be a special case of their approach involving the truncated uniform kernel. However, they typically obtain more powerful procedures when using a different weighting. The authors consider especially the procedure of Robinson (1991) for choosing the smoothing parameter of the spectral density estimator. They also introduce a generalized version of the test for ARCH effects due to Ling & Li (1997). They investigate the finite‐sample performance of their tests and compare them to existing tests including those of Ling & Li (1997) and the residual‐based diagnostics of Tse (2002).Finally, they present a financial application.     

Statistical surveillance of the mean vector and the covariance matrix of nonlinear time series

The purpose of this paper is to jointly monitor the mean vector and the covariance matrix of multivariate nonlinear times series. The underlying target process is assumed to be a constant conditional correlation process Bollerslev (Rev Econ Stat 72:498–505, 1990) or a dynamic conditional correlation model Engle (J Bus Econ Stat 20:339–350, 2002). We introduce several EWMA and CUSUM control charts. These control schemes are based on univariate EWMA statistics, multivariate EWMA recursions, and different types of cumulative sums. The recursions are applied to local measures for means and covariances, e.g. the present observations and the conditional covariances. Further, they are applied to means and covariances of residuals. The control statistics are obtained by computing the Mahalanobis distance between the EWMA or CUSUM statistics and their expectations if no change occurs. Via Monte Carlo simulation the performance of the proposed charts is compared. Our empirical study illustrates an application of these control procedures to bivariate logarithmic returns of the European indices FTSE100 and DAX. In order to assess the performance of the introduced schemes we apply the average run length and the maximum conditional expected delay.     

Influence diagnostics in the Gamma regression model with adjusted deviance residuals

In this study, we develop the adjusted deviance residuals for the gamma regression model (GRM) by following Cordeiro's (2004) method. These adjusted deviance residuals under the GRM are used for influence diagnostics. A comparative analysis has been sorted out between our proposed method of the adjusted deviance residuals and an existing method for influence diagnostics. These results are illustrated by a simulation study and using a real data set. They are presented for different values of dispersion and sample sizes and indicate the significant role of the GRM inferences.     

A set of independent sequential residuals for the multivariate regression model

In this paper a set of residuals for the multivariate linear regression model is introduced. These residuals are shown to be independent with known distributions which do not depend on the parameters of the model. Transformations of the mentioned residuals may be used to construct exact α goodness-of-fit tests for the multivariate regression model.     

Test of Association Between Two Ordinal Variables While Adjusting for Covariates

We propose a new set of test statistics to examine the association between two ordinal categorical variables X and Y after adjusting for continuous and/or categorical covariates Z. Our approach first fits multinomial (e.g., proportional odds) models of X and Y, separately, on Z. For each subject, we then compute the conditional distributions of X and Y given Z. If there is no relationship between X and Y after adjusting for Z, then these conditional distributions will be independent, and the observed value of (X, Y) for a subject is expected to follow the product distribution of these conditional distributions. We consider two simple ways of testing the null of conditional independence, both of which treat X and Y equally, in the sense that they do not require specifying an outcome and a predictor variable. The first approach adds these product distributions across all subjects to obtain the expected distribution of (X, Y) under the null and then contrasts it with the observed unconditional distribution of (X, Y). Our second approach computes "residuals" from the two multinomial models and then tests for correlation between these residuals; we define a new individual-level residual for models with ordinal outcomes. We present methods for computing p-values using either the empirical or asymptotic distributions of our test statistics. Through simulations, we demonstrate that our test statistics perform well in terms of power and Type I error rate when compared to proportional odds models which treat X as either a continuous or categorical predictor. We apply our methods to data from a study of visual impairment in children and to a study of cervical abnormalities in human immunodeficiency virus (HIV)-infected women. Supplemental materials for the article are available online.     

Influence diagnostics in constrained general linear models

ABSTRACT

Constrained general linear models (CGLMs) have wide applications in practice. Similar to other data analysis, the identification of influential observations that may be potential outliers is an important step beyond in the CGLMs. We develop multiple case-deletion diagnostics for detecting influential observations in the CGLMs. The diagnostics are functions of basic building blocks: studentized residuals, error contrast matrix, and the inverse of the response variable covariance matrix. The basic building blocks are computed only once from the complete data analysis and provide information on the influence of the data on different aspects of the model fit. Computational formulas are given which make the procedures feasible. An illustrative example with a real data set is also reported.     

Influence analysis in multivariate linear general models

In this paper we obtain several influence measures for the multivariate linear general model through the approach proposed by Muñoz-Pichardo et al. (1995), which is based on the concept of conditional bias. An interesting charasteristic of this approach is that it does not require any distributional hypothesis. Appling the obtained results to the multivariate regression model, we obtain some measures proposed by other authors. Nevertheless, on the results obtained in this paper, we emphasize two aspects. First, they provide a theoretical foundation for measures proposed by other authors for the mul¬tivariate regression model. Second, they can be applied to any linear model that can be formulated as a particular case of the multivariate linear general model. In particular, we carry out an application to the multivariate analysis of covariance.     

Application of 'delete = replace' to deletion diagnostics for variance component estimation in the linear mixed model

Summary.  'Delete = replace' is a powerful and intuitive modelling identity. This paper extends previous work by stating and proving the identity in more general terms and extending its application to deletion diagnostics for estimates of variance components obtained by restricted maximum likelihood estimation for the linear mixed model. We present a new, fast, transparent and approximate computational procedure, arising as a by-product of the fitting process. We illustrate the effect of the deletion of individual observations, of 'subjects' and of arbitrary subsets. Central to the identity and its application is the conditional residual.     

Simple correspondence analysis using adjusted residuals

Correspondence analysis is a versatile statistical technique that allows the user to graphically identify the association that may exist between variables of a contingency table. For two categorical variables, the classical approach involves applying singular value decomposition to the Pearson residuals of the table. These residuals allow for one to use a simple test to determine those cells that deviate from what is expected under independence. However, the assumptions concerning these residuals are not always satisfied and so such results can lead to questionable conclusions.One may consider instead, an adjustment of the Pearson residual, which is known to have properties associated with the standard normal distribution. This paper explores the application of these adjusted residuals to correspondence analysis and determines how they impact upon the configuration of points in the graphical display.     

A Multivariate Model for Repeated Failure Time Measurements

A parametric multivariate failure time distribution is derived from a frailty-type model with a particular frailty distribution. It covers as special cases certain distributions which have been used for multivariate survival data in recent years. Some properties of the distribution are derived: its marginal and conditional distributions lie within the parametric family, and association between the component variates can be positive or, to a limited extent, negative. The simple closed form of the survivor function is useful for right-censored data, as occur commonly in survival analysis, and for calculating uniform residuals. Also featured is the distribution of ratios of paired failure times. The model is applied to data from the literature     

Estimation of patterned covariance in the multivariate linear models: an outer product least-squares approach

In this article, we present a framework of estimating patterned covariance of interest in the multivariate linear models. The main idea in it is to estimate a patterned covariance by minimizing a trace distance function between outer product of residuals and its expected value. The proposed framework can provide us explicit estimators, called outer product least-squares estimators, for parameters in the patterned covariance of the multivariate linear model without or with restrictions on regression coefficients. The outer product least-squares estimators enjoy the desired properties in finite and large samples, including unbiasedness, invariance, consistency and asymptotic normality. We still apply the framework to three special situations where their patterned covariances are the uniform correlation, a generalized uniform correlation and a general q-dependence structure, respectively. Simulation studies for three special cases illustrate that the proposed method is a competent alternative of the maximum likelihood method in finite size samples.