A method of calculating the national composition of the total population between censuses

A method of calculating the composition of the Soviet population by nationality between censuses is described. The method uses both census and vital statistics data and is designed to produce estimates for the USSR, the Union Republics, and the rural and urban population.     

A review and evaluation of the housing unit method of population estimation

"The housing unit (HU) method is used by public and private agencies throughout the United States to make local population estimates. This article describes many of the different types of data and techniques that can be used in applying the HU method, and it discusses the strengths and weaknesses of each. Empirical evidence from four different states is provided, comparing the accuracy of HU population estimates with the accuracy of other commonly used estimation techniques. Several conclusions are drawn regarding the usefulness of the HU method for local population estimation."     

Estimation of the population mean and median using truncation-based ranked set samples

In this paper, a new sampling method is suggested, namely truncation-based ranked set samples (TBRSS) for estimating the population mean and median. The suggested method is compared with the simple random sampling (SRS), ranked set sampling (RSS), extreme ranked set sampling (ERSS) and median-ranked set sampling (MRSS) methods. It is shown that for estimating the population mean when the underlying distribution is symmetric, TBRSS estimator is unbiased and it is more efficient than the SRS estimator based on the same number of measured units. For asymmetric distributions considered in this study, TBRSS estimator is more efficient than the SRS for all considered distributions except for exponential distribution when the selection coefficient gets large. When compared with ERSS and MRSS methods, TBRSS performs well with respect to ERSS for all considered distributions except for U(0, 1) distribution, while TBRSS efficiency is higher than that of MRSS for U(0, 1) distribution. For estimating the population median, the TBRSS estimators have higher efficiencies when compared with SRS and ERSS. A real data set is used to illustrate the suggested method.     

Testing equality of survival distributions when the population marks are missing

This paper introduces a nonparametric approach for testing the equality of two or more survival distributions based on right censored failure times with missing population marks for the censored observations. The standard log-rank test is not applicable here because the population membership information is not available for the right censored individuals. We propose to use the imputed population marks for the censored observations leading to fractional at-risk sets that can be used in a two sample censored data log-rank test. We demonstrate with a simple example that there could be a gain in power by imputing population marks (the proposed method) for the right censored individuals compared to simply removing them (which also would maintain the right size). Performance of the imputed log-rank tests obtained this way is studied through simulation. We also obtain an asymptotic linear representation of our test statistic. Our testing methodology is illustrated using a real data set.     

Stochastic population models for the analysis of the effects of demographic processes on social security systems

The aim of this paper is to describe several methods for quantifying the amount of uncertainty inherent in population forecasts used to assess the impact of demographic processes on social security systems. Each method is briefly outlined, and its advantages and disadvantages are discussed. The primary emphasis is on stochastic population models, and the geographic focus is on the Federal Republic of Germany.     

A new sampling method for estimating the population mean

A double L ranked set sampling (DLRSS) method is suggested for estimating the population mean. The DLRSS is compared with the simple random sampling (SRS), ranked set sampling (RSS) and L ranked set sampling (LRSS) methods based on the same number of measured units. The conditions for which the suggested estimator performs better than the other estimators are derived. It is found that, the suggested DLRSS estimator is an unbiased of the population mean, and is more efficient than its counterparts using SRS, RSS, and LRSS methods. Real data sets are used for illustration.     

Stochastic population forecasts based on conditional expert opinions

The paper develops and applies an expert-based stochastic population forecasting method, which can also be used to obtain a probabilistic version of scenario-based official forecasts. The full probability distribution of population forecasts is specified by starting from expert opinions on the future development of demographic components. Expert opinions are elicited as conditional on the realization of scenarios, in a two-step (or multiple-step) fashion. The method is applied to develop a stochastic forecast for the Italian population, starting from official scenarios from the Italian National Statistical Office.     

The influence of migration on population growth

Methods of analyzing the relationship between migration and population growth are reviewed and evaluated, and a new method developed by the authors is presented.     

Rank procedures in many population forced discrimination problems

In this paper the rank method for forced discrimination in two population problems, introduced by Randies, Broffitt, Ramberg and Hogg (1978), is extended to cover settings involving more than two populations. Several methods of ranking are compared to the normal theory procedure in a Monte Carlo study. Asymptotic theory is included which confirms that the rank method does balance the limiting probabilities of misclassification in a two population setting.     

Variance estimation for integrated population models

State-space models are widely used in ecology. However, it is well known that in practice it can be difficult to estimate both the process and observation variances that occur in such models. We consider this issue for integrated population models, which incorporate state-space models for population dynamics. To some extent, the mechanism of integrated population models protects against this problem, but it can still arise, and two illustrations are provided, in each of which the observation variance is estimated as zero. In the context of an extended case study involving data on British Grey herons, we consider alternative approaches for dealing with the problem when it occurs. In particular, we consider penalised likelihood, a method based on fitting splines and a method of pseudo-replication, which is undertaken via a simple bootstrap procedure. For the case study of the paper, it is shown that when it occurs, an estimate of zero observation variance is unimportant for inference relating to the model parameters of primary interest. This unexpected finding is supported by a simulation study.     

Confidence intervals for the closed population size under inverse sampling without replacement

Inverse sampling is an appropriate design for the second phase of capture-recapture experiments which provides an exactly unbiased estimator of the population size. However, the sampling distribution of the resulting estimator tends to be highly right skewed for small recapture samples, so, the traditional Wald-type confidence intervals appear to be inappropriate. The objective of this paper is to study the performance of interval estimators for the population size under inverse recapture sampling without replacement. To this aim, we consider the Wald-type, the logarithmic transformation-based, the Wilson score, the likelihood ratio and the exact methods. Also, we propose some bootstrap confidence intervals for the population size, including the with-replacement bootstrap (BWR), the without replacement bootstrap (BWO), and the Rao–Wu’s rescaling method. A Monte Carlo simulation is employed to evaluate the performance of suggested methods in terms of the coverage probability, error rates and standardized average length. Our results show that the likelihood ratio and exact confidence intervals are preferred to other competitors, having the coverage probabilities close to the desired nominal level for any sample size, with more balanced error rate for exact method and shorter length for likelihood ratio method. It is notable that the BWO and Rao–Wu’s rescaling methods also may provide good intervals for some situations, however, those coverage probabilities are not invariant with respect to the population arguments, so one must be careful to use them.     

Estimates of the British Jewish population 1984-88

"During the 20th century, estimates of the British Jewish population have been obtained by applying appropriate death-rates to communal mortality data. This death-rate method has become increasingly sophisticated with respect to the death-rates used. The exercise reported here covers more than 22,000 deaths recorded in the community over the 5-year period [1984-88].... An estimate of 308,000 is suggested for the community, in which deaths-related data are augmented by information about births within the community."     

Adjusting the 1980 census of population and housing

"In 1980, several cities and states sued the U.S. Census Bureau to correct census results. This correction would adjust for the differential undercounting of Blacks and Hispanics, especially in cities. In this article, the authors, each of whom testified for New York City and State in their joint lawsuit against the Census Bureau, describe the likely pattern of the undercount and present a method to adjust for it." The authors describe available methods for data adjustment and introduce a regression-based composite method of adjustment, which is used to estimate the undercounts for 66 areas. "As expected, we find that the highest undercount rates are in large cities, and the lowest are in states and state remainders with small percentages of Blacks and Hispanics. Next, we analyze how sensitive our estimates are to changes in data and modeling assumptions. We find that these changes do not affect the estimates very much. Our conclusion is that regardless of whether we use one of the simple methods or the composite method and regardless of how we vary the assumptions of the composite method, an adjustment reliably reduces population shares in states with few minorities and increases the shares of large cities."     

Simulation of close-to-reality population data for household surveys with application to EU-SILC

Statistical simulation in survey statistics is usually based on repeatedly drawing samples from population data. Furthermore, population data may be used in courses on survey statistics to explain issues regarding, e.g., sampling designs. Since the availability of real population data is in general very limited, it is necessary to generate synthetic data for such applications. The simulated data need to be as realistic as possible, while at the same time ensuring data confidentiality. This paper proposes a method for generating close-to-reality population data for complex household surveys. The procedure consists of four steps for setting up the household structure, simulating categorical variables, simulating continuous variables and splitting continuous variables into different components. It is not required to perform all four steps so that the framework is applicable to a broad class of surveys. In addition, the proposed method is evaluated in an application to the European Union Statistics on Income and Living Conditions (EU-SILC).     

Spatial differentiation of the socioeconomic composition of the population

Differences in population characteristics among the administrative districts of Poland are analyzed. The characteristics examined include density, place of employment, urban population growth, population employed in agriculture, and migration.     

On an application of the diffusion approximation of the generalized birth and death process for stochastic population projection

Assuming that both birth and death rates are density and time dependent, a diffusion approximation of the generalized birth and death process has been considered in this paper to obtain a suitable stochastic population model describing the population size and its moments. A simple method of estimating the parameters of the model Is discussed. The predictions of the expected size of the population, and the variance are made and compared with the corresponding census figures as well as with another deterministic projection series made for the corresponding period.     

Bayesian inference and data cloning in the calibration of population projection matrices

Discrete time models are used in Ecology for describing the dynamics of an age-structured population. They can be introduced from a deterministic or from a stochastic viewpoint. We analyze a stochastic model for the case in which the dynamics of the population is described by means of a projection matrix. In this statistical model, fertility rates and survival rates are unknown parameters which are estimated by using a Bayesian approach and also data cloning, which is a simulation-based method especially useful with complex hierarchical models.

Both methodologies are applied to real data from the population of Steller sea lions located in the Alaska coast since 1978–2004. The estimates obtained from these methods show a good behavior when they are compared to the nonmissing actual values.     

Estimation of the population spectral distribution from a large dimensional sample covariance matrix

This paper introduces a new method to estimate the spectral distribution of a population covariance matrix from high-dimensional data. The method is founded on a meaningful generalization of the seminal Mar?enko–Pastur equation, originally defined in the complex plane, to the real line. Beyond its easy implementation and the established asymptotic consistency, the new estimator outperforms two existing estimators from the literature in almost all the situations tested in a simulation experiment. An application to the analysis of the correlation matrix of S&P 500 daily stock returns is also given.     

General procedure for estimating the population mean using ranked set sampling

In this paper, we suggest a class of estimators for estimating the population mean ? of the study variable Y using information on X?, the population mean of the auxiliary variable X using ranked set sampling envisaged by McIntyre [A method of unbiased selective sampling using ranked sets, Aust. J. Agric. Res. 3 (1952), pp. 385–390] and developed by Takahasi and Wakimoto [On unbiased estimates of the population mean based on the sample stratified by means of ordering, Ann. Inst. Statist. Math. 20 (1968), pp. 1–31]. The estimator reported by Kadilar et al. [Ratio estimator for the population mean using ranked set sampling, Statist. Papers 50 (2009), pp. 301–309] is identified as a member of the proposed class of estimators. The bias and the mean-squared error (MSE) of the proposed class of estimators are obtained. An asymptotically optimum estimator in the class is identified with its MSE formulae. To judge the merits of the suggested class of estimators over others, an empirical study is carried out.     

Estimation of infant mortality rates categorized by social class for an Australian population

"This paper reports a method of deriving simultaneous confidence intervals for [Australian] infant mortality rates based on a birth sample rather than the birth population. The large sample size employed enables the use of asymptotic multivariate techniques....[The authors find that] where the population distribution of a characteristic such as social class is not known, confidence intervals can be estimated for rates based on the distribution of this characteristic in a sample of that population."