A two-stage group sampling plan based on truncated life tests for a general distribution

A two-stage group acceptance sampling plan based on a truncated life test is proposed, which can be used regardless of the underlying lifetime distribution when multi-item testers are employed. The decision upon lot acceptance can be made in the first or second stage according to the number of failures from each group. The design parameters of the proposed plan such as number of groups required and the acceptance number for each of two stages are determined independently of an underlying lifetime distribution so as to satisfy the consumer's risk at the specified unreliability. Single-stage group sampling plans are also considered as special cases of the proposed plan and compared with the proposed plan in terms of the average sample number and the operating characteristics. Some important distributions are considered to explain the procedure developed here.     

Design of a time-truncated double sampling plan for a general life distribution

A double sampling plan based on truncated life tests is proposed and designed under a general life distribution. The design parameters such as sample sizes and acceptance numbers for the first and the second samples are determined so as to minimize the average sample number subject to satisfying the consumer's and producer's risks at the respectively specified quality levels. The resultant tables can be used regardless of the underlying distribution as long as the reliability requirements are specified at two risks. In addition, Gamma and Weibull distributions are particularly considered to report the design parameters according to the quality levels in terms of the mean ratios.     

New acceptance sampling plans based on life tests for Birnbaum–Saunders distributions

In this paper, we consider the Birnbaum–Saunders distribution as a life model to develop various acceptance sampling schemes based on the truncated life tests. We develop the double sampling plan and determine the design parameters satisfying both the producer's and consumer's risks simultaneously for the specified reliability levels in terms of the mean ratio to the specified life. We also propose a group sampling plan and determine the parameters by the above-mentioned two-point method. Tables are constructed for the proposed sampling plans and results are explained with examples.     

Acceptance Sampling Plans from Truncated Life Tests Based on the Birnbaum–Saunders Distribution for Percentiles

Time to failure due to fatigue is one of the common quality characteristics in material engineering applications. In this article, acceptance sampling plans are developed for the Birnbaum–Saunders distribution percentiles when the life test is truncated at a pre-specified time. The minimum sample size necessary to ensure the specified life percentile is obtained under a given customer's risk. The operating characteristic values (and curves) of the sampling plans as well as the producer's risk are presented. The R package named spbsq is developed to implement the developed sampling plans. Two examples with real data sets are also given as illustration.     

Attribute-variable Inspection Policy for Lots Using Resampling Based on EWMA

A new mixed sampling plan which is a combination of the attribute single sampling plan and variables resampling scheme based on EWMA statistic is proposed in this paper. The operating characteristic function of the proposed plan is derived and the plan parameters are determined such that the probability of acceptance of good lot is larger than the specified producer's confidence level and the bad lot acceptance probability is smaller than the consumer's confidence level. The efficiency and the advantages of the proposed plan are discussed over the existing attribute sampling plan. The extensive tables are provided for industrial applications. The use of tables is discussed with the help of a real-time industrial example.     

Optimal acceptance sampling policy considering Bayesian risks

In this paper, we propose a sampling policy considering Bayesian risks. Various definitions of producer's risk and consumer's risk have been made. Bayesian risks for both producer and consumer are proven to give better information to decision-makers than classical definitions of the risks. So considering the Bayesian risk constraints, we seek to find optimal acceptance sampling policy by minimizing total cost, including the cost of rejecting the batch, the cost of inspection, and the cost of defective items detected during the operation. Proper distributions to construct the objective function of the model are specified. In order to demonstrate the application of the proposed model, we illustrate a numerical example. Furthermore, the results of the sensitivity analysis show that lot size, the cost of inspection, and the cost of one defective item are key factors in sampling policies. The acceptable quality level, the lot tolerance proportion defective, and Bayesian risks also affect the sampling policy, but variations of acceptable quality level and producer Bayesian risks, for values more than a specified value, cause no changes in sampling policy.     

Acceptance Sampling Plans from Truncated Life Tests Based on the Generalized Birnbaum–Saunders Distribution

In this article, we develop acceptance sampling plans when the life test is truncated at a pre-fixed time. The minimum sample size necessary to ensure the specified median life is obtained by assuming that the lifetimes of the test units follow a generalized Birnbaum–Saunders distribution. The operating characteristic values of the sampling plans as well as producer's risk are presented. Two examples are also given to illustrate the procedure developed here, with one of them being based on a real data from software reliability.     

Economic design of quick switching sampling system for assuring Weibull distributed mean life

In this paper, we propose the quick switching sampling system for assuring mean life of a product under time truncated life test where the lifetime of the product follows the Weibull distribution and the mean life is considered as the quality of the product. The optimal parameters of the proposed system are determined using two points on the operating characteristic curve approach for various combinations of consumer's risk and ratio of true mean life time and specified life time. Tables are constructed to determine the optimal parameters for specified acceptable quality level and limiting quality level along with the corresponding probabilities of acceptance. The proposed system is compared with other existing sampling plans under Weibull lifetime model. In addition, an economical design of the proposed system is also discussed.     

Optimal designing of an SkSP-R double sampling plan

In this article, we propose a method of planning and determining the optimum parameters of a SkSP-R skip-lot sampling plan by using the attribute double sampling plan as the reference plan. The SkSP-R plan is a new type of skip-lot sampling plan which has a provision for re-inspecting the submitted lots. The optimal plan parameters of the suggested sampling plan are estimated with the target that the average sample number be minimized and satisfying both the specified producer's as well as the consumer's risks simultaneously. In order to obtain the optimum parameters, tables are also built for different combinations of the acceptable quality level and the limiting quality level in conjunctions with different producer's and consumer's risks. An illustrative example is provided for the implementation of the suggested plan. The advantages of the suggested plan over the existing conventional sampling plans and other existing skip-lot sampling plans are also described.     

Optimal designing of skip-lot sampling plan of type SkSP-2 with group acceptance sampling plan as reference plan under Burr-type XII distribution

In this paper, skip-lot sampling plan of type SkSP-2 with group acceptance sampling plans is proposed when the lifetime of the product follows the Burr-type XII distributions. The optimal parameters of the proposed plan are determined when two points on operating characteristics curve namely acceptable quality level and limiting quality level and the number of testers are specified. We also considered the Burr-type XII distribution to find the plan parameters. Several tables are given for practical use. We compare the results of proposed plan with the existing plans. Results are explained using real-world examples.     

Multiple dependent state repetitive sampling plans with or without auxiliary variable

In this article, a new variable acceptance sampling plan has been developed using the multiple dependent state repetitive sampling scheme for the normal distribution. The plan parameters have been determined so as to minimize the average sample number while satisfying the producer's and the consumer's risks under the operating characteristic function. The multiple dependent state repetitive sampling scheme has also been extended to the case of utilizing an auxiliary variable. The proposed sampling plans are compared with the existing sampling plans.     

Double and group acceptance sampling plan for truncated life test based on inverse log-logistic distribution

This paper introduces a double and group acceptance sampling plans based on time truncated lifetimes when the lifetime of an item follows the inverse log-logistic (ILL) distribution with known shape parameter. The operating characteristic function and average sample number (ASN) values of the double acceptance sampling inspection plan are provided. The values of the minimum number of groups and operating characteristic function for various quality levels are obtained for a group acceptance sampling inspection plan. A comparative study between single acceptance sampling inspection plan and double acceptance sampling inspection plan is carried out in terms of sample size. One simulated example and four real-life examples are discussed to show the applicability of the proposed double and group acceptance sampling inspection plans for ILL distributed quality parameters.     

An economic reliability test plan: Log-logistic distribution

Sampling plans in which items that are put to test, to collect the life of the items in order to decide upon accepting or rejecting a submitted lot, are called reliability test plans. The basic probability model of the life of the product is specified as the well-known log-logistic distribution with a known shape parameter. For a given producer's risk, sample size, termination number, and waiting time to terminate the test plan are computed. The preferability of the test plan over similar plans existing in the literature is established with respect to cost and time of the experiment.     

Designing and construction of tightened-normal-tightened variables sampling scheme

The tightened-normal-tightened (TNT) attributes sampling scheme was devised by Calvin (1977). In this paper, a TNT Scheme with variables sampling plan as the reference plan, designated as TNTVSS (n_σ; k_T, k_N) is introduced, where n_σ is the sample size under the reference plan, and k_T and k_N are the acceptance constants corresponding to tightened and normal plans respectively. The behaviour of OC curves of the TNTVSS (n_σ; k_T, k_N) is studied. The efficiency of TNTVSS (n_σ; k_T, k_N) with respect to smaller sample sizes has been established over the attributes scheme. The TNTVSS is matched with the TNT (n; c_N, c_T) of Vijayaraghavan and Soundararajan (1996), for the specified points on the OC curves, namely (p₁, α) and (p₂, β) and it is shown that the sample size of the variables scheme is much smaller than that of the attributes scheme. The TNT scheme with an unknown σ variables plan as the reference plan is also introduced along with the procedure of selection of the parameters. The method of designing the scheme based on the given AQL (Acceptable Quality level), α (producer's risk), LQL (Limiting Quality Level) and β (consumer's risk) is indicated. Among the class of TNTVSS which exists, for a given (p₁,α) and (p₂, β), a scheme, which will have a more steeper OC curve than that of any other scheme, is identified and given.     

Bayesian Design of Special Type of Double Sampling Plans for Compliance Testing

Bayesian acceptance sampling plans, which utilize prior information on the process variation, can be employed as an alternative to conventional types of plans for taking decisions on the disposition of submitted lots. A special type of double sampling inspection plans by attributes with small acceptance numbers using Bayesian methodology is presented in this paper emphasizing its significance over small acceptance number single sampling plans. The procedures for designing such sampling plans for specified degree of discrimination which would ensure protection to the producer and consumer are discussed with illustrations under the conditions for the application of gamma-Poisson distribution.     

Zero Acceptance Number Chained Quick Switching System

Zero acceptance number sampling inspection plans are commonly employed for compliance sampling and audit inspection purposes. The discriminatory power of zero acceptance number sampling plans is rather poor. This article remedies this disadvantage by chaining past lot results within a quick switching system.     

A double acceptance sampling plan for generalized log-logistic distributions with known shape parameters

A double acceptance sampling plan for the truncated life test is developed assuming that the lifetime of a product follows a generalized log-logistic distribution with known shape parameters. The zero and one failure scheme is mainly considered, where the lot is accepted if no failures are observed from the first sample and it is rejected if two or more failures occur. When there is one failure from the first sample, the second sample is drawn and tested for the same duration as the first sample. The minimum sample sizes of the first and second samples are determined to ensure that the true median life is longer than the given life at the specified consumer’s confidence level. The operating characteristics are analyzed according to various ratios of the true median life to the specified life. The minimum such ratios are also obtained so as to lower the producer’s risk at the specified level. The results are explained with examples.     

A new sampling plan under the exponential distribution

This article considers a sampling plan when the quality characteristic follows the exponential distribution. We provide the exact approach and propose an approximated approach. In the proposed approximation, a new statistic combined with a Weibull transformation is used for the normal approximation. The plan parameters are obtained through the two-point approach at the acceptable quality level (AQL) and the limiting quality level (LQL). The tables for plan parameters are reported according to various values of the AQL and the LQL when the producer's and the consumer's risks are given. A real example is given to illustrate the proposed approximation approach.     

Taux de résistance des tests de rang d'indépendance

The resistance of tests to acceptance and rejection of null hypotheses was denned and studied by Ylvisaker in the context of one-sample problems. This notion provides a measure of a test's resistance to outliers. In this paper, we propose an extension of this notion to rank-based tests of independence for bivariate random variables. We show, among other things, that Kendall's test of independence is more resistant than Spearman's test.