Impact of measurement errors on the performance and distributional properties of the multivariate capability index $$\mathbf{NMC }_\mathbf{pm }$$

Current industrial processes are sophisticated enough to be tied to only one quality variable to describe the process result. Instead, many process variables need to be analyze together to assess the process performance. In particular, multivariate process capability analysis (MPCIs) has been the focus of study during the last few decades, during which many authors proposed alternatives to build the indices. These measures are extremely attractive to people in charge of industrial processes, because they provide a single measure that summarizes the whole process performance regarding its specifications. In most practical applications, these indices are estimated from sampling information collected by measuring the variables of interest on the process outcome. This activity introduces an additional source of variation to data, that needs to be considered, regarding its effect on the properties of the indices. Unfortunately, this problem has received scarce attention, at least in the multivariate domain. In this paper, we study how the presence of measurement errors affects the properties of one of the MPCIs recommended in previous researches. The results indicate that even little measurement errors can induce distortions on the index value, leading to wrong conclusions about the process performance.     

Choosing principal components for multivariate statistical process control

Principal components are useful for multivariate process control. Typically, the principal component variables are often selected to summarize the variation in the process data. We provide an analysis to select the principal component variables to be included in a multivariate control chart that incorporates the unique aspects of the process control problem (rather than using traditional principal component guidelines).     

Multivariate attribute control chart using Mahalanobis D2 statistic

Process control involves repeated hypothesis testing based on several samples. However, process control is not exactly hypothesis testing as such since it deals with detection of non-random patterns of variation as well in a fleeting kind of population. Compare this with hypothesis testing which is principally meant for a stagnant population. Dr Walter A. Shewhart introduced a graphic method for doing this testing in a fleeting population in 1924. This graphic method came to be known as control chart and is widely used throughout the world today for process management purposes. Subsequently there was much advancement in process control techniques. In particular, when more than one variable was involved, process control techniques were developed mainly by Hicks (1955), Jackson (1956 and 1959) and Montgomery and Wadsworth (1972) based on the pioneering work of Hotelling in 1931. Most of them have worked in the area of multivariate variable control chart with the underlying distribution as multivariate normal. When more than one attribute variables are involved some works relating to test of hypothesis was done by Mahalanobis (1946). These works were also based on the Hotelling T² test. This paper expands the concept of 'Mahalanobis Distance' in case of a multinomial distribution and thereby proposes a multivariate attribute control chart.     

Precision Index in the Multivariate Context

General multivariate quantiles are employed to extend the classic univariate process precision index to the multivariate context under very mild conditions. Using halfspace depth regions for this purpose is especially recommended because it leads to both computational simplicity and natural generalizations to the tool-wear setup thanks to some recent advances in multiple-output and projectional quantile regression. A few examples are included to illustrate how the methodology might work in practice.     

Equity Trading Volume and Volatility: Latent Information Arrivals and Common Long-Run Dependencies

This article examines the behavior of equity trading volume and volatility for the individual firms composing the Standard & Poor's 100 composite index. Using multivariate spectral methods, we find that fractionally integrated processes best describe the long-run temporal dependencies in both series. Consistent with a stylized mixture-of-distributions hypothesis model in which the aggregate “news”-arrival process possesses long-memory characteristics, the long-run hyperbolic decay rates appear to be common across each volume-volatility pair.     

Viability and capability indexes for multiresponse processes

The viability index Vr is introduced as an intuitively appealing measure of the capability potential of a process. It is related to the well-known index Cp but has some advantages over it. The statistical properties of Vr are readily obtainable and, unlike Cp, it extends naturally to multi-response processes. The multivariate viability index Vrn is defined, discussed and illustrated using an example from the minerals sector.     

QUALITY CONTROL WITH MULTIVARIATE DATA

The paper examines statistical process control of bivariate and multivariate data, using in particular the multivariate equivalents of the univariate Shewhart chart, CUSUM chart and the Exponentially Weighted Moving Average chart. This illustrates the usefulness of Principal Component methods in statistical process control with multivariate data.     

On the Multivariate Upcrossings Index

The multivariate extremal index function is a measure of the clustering among the extreme values of a multivariate stationary sequence. In this article, we introduce a measure of the degree of clustering of upcrossings in a multivariate stationary sequence, called multivariate upcrossings index, which is a multivariate generalization of the concept of upcrossings index. We derive the main properties of this function, namely the relations with the multivariate extremal index and the clustering of upcrossings.

Imposing general local and asymptotic dependence restrictions on the sequence or on its marginals we compute the multivariate upcrossings index from the marginal upcrossings indices and from the joint distribution of a finite number of variables. A couple of illustrative examples are exploited.     

基于多元经验模式分解的股票收益与宏观经济关系分析

提出一种基于多元经验模式分解的股票市场收益与宏观经济活动关系的分析方法。通过月度道琼斯指数和美国工业生产指数的联合多元经验模式分解,得到多元金融时间序列的多尺度分量。采用希尔伯特—黄变换和边际谱确定每个尺度的主周期,进而在不同尺度下对多元时间序列进行相关性分析及Granger因果检验。结果表明:股票指数在中、长周期的某些尺度上是工业生产指数的Granger原因,序列之间具有明显的相关性,股票指数领先工业生产指数16个月到32个月不等。     

Application of Multivariate Analysis to Increase the Yield of Dry Cell Batteries

In an organization, the manufacturing process of a dry cell battery was suffering from the problem of frequent stoppages in the assembly line. The complete battery manufacturing operation is highly automated and mechanized. It was suspected that excessive variation in overall height of bobbin was the major reason for such stoppages. The bobbin, the inside part of a dry cell battery acting as cathode, is formed by the battery extrusion process. A planned experiment was carried out on the extrusion process that identified the setting of extrusion machines and the amount of water content in the cathode mixture as the parameters causing variation in the bobbin characteristics. The problem of frequent stoppages was eliminated when appropriate action was taken on these two parameters. Finally, multivariate and univariate control schemes were developed for online control of the bobbin characteristics.     

A comparison of methods forsing loss-based capability index

The process capability index C _pm, sometimes called the loss-based index, has been proposed to the manufacturing industry for measuring process reproduction capability. This index incorporates the variation of production items with respect to the target value and the specification limits preset in the factory. To estimate the loss-based index properly and accurately, certain frequentist and Bayesian perspectives have been proposed to obtain lower confidence bounds (LCBs) for providing minimum process capability. The LCBs not only provide critical information regarding process performance but are also used to determine whether an improvement was made in a capability index and by extension in reducing the fraction of non-conforming items. In this paper, under the assumption of normality, based on frequentist and Bayesian senses, several existing approaches for constructing LCBs of C _pm are presented. Depending on the statistical methods used, we then classify these existing approaches into three categories and compared them in terms of the coverage rates and the mean values of the LCBs via simulations. The relative advantages and disadvantages of these approaches are summarized with some highlights of the relevant findings.     

SPC for short-run multivariate autocorrelated processes

This paper discusses the development of a multivariate control charting technique for short-run autocorrelated data manufacturing environment. The proposed approach is a combination of the multivariate residual charts for autocorrelated data and the multivariate transformation technique for i.i.d. process observations of short lengths. The proposed approach consists in fitting adequate multivariate time-series model of various process outputs and computes the residuals, transforming them into standard normal N(0, 1) data and then using standardized data as inputs to plot conventional univariate i.i.d. control charts. The objective for applying multivariate finite horizon techniques for autocorrelated processes is to allow continuous process monitoring, since all process outputs are controlled trough the use of a single control chart with constant control limits. Throughout simulated examples, it is shown that the proposed short-run process monitoring technique provides approximately similar shifts detection properties as VAR residual charts.     

考虑跨期变动趋势的改进熵权法研究

权重确定是多指标综合评价过程中的关键环节。文章针对主观赋权法中专家对指标重要性判断的随意性及常规客观赋权法的片面性,提出考虑跨期变动趋势的改进熵值赋权方法。该方法考虑了时间因素,从指标数据跨时期的变动趋势中挖掘指标的相对重要性信息,并基于熵理论确定指标的重要程度之比,分层次规划求解各指标权重。最后结合我国新型城镇化水平评价案例,验证了该方法的合理性和有效性。     

Modeling a minimal spanning tree

We model the distribution of the normalized interpoint distances (IDs) on the minimal spanning tree (MST) using multivariate beta vectors. We use a multivariate normal copula with beta marginals and a Dirichlet distribution to obtain beta vectors. Based on the normalized ordered IDs of the MST, we define a multivariate Gini index to measure the scatter of a data cloud. An example considers the MST of numerals in 11 European languages and obtains their Gini index. A simulation study compares the Gini index, the maximum and the range of the IDs for multivariate normal and log-normal data, with the results of modeling the distances on the MST.     

On tail index estimation based on multivariate data

This article is devoted to the study of tail index estimation based on i.i.d. multivariate observations, drawn from a standard heavy-tailed distribution, that is, of which Pareto-like marginals share the same tail index. A multivariate central limit theorem for a random vector, whose components correspond to (possibly dependent) Hill estimators of the common tail index α, is established under mild conditions. We introduce the concept of (standard) heavy-tailed random vector of tail index α and show how this limit result can be used in order to build an estimator of α with small asymptotic mean squared error, through a proper convex linear combination of the coordinates. Beyond asymptotic results, simulation experiments illustrating the relevance of the approach promoted are also presented.     

Comparison of performance measures for multivariate discrete models

For multivariate probit models, Spiess and Tutz suggest three alternative performance measures, which are all based on the decomposition of the variation. The multivariate probit model can be seen as a special case of the discrete copula model. This paper proposes some new measures based on the value of the likelihood function and the prediction-realization table. In addition, it generalizes the measures from Spiess and Tutz for the discrete copula model. Results of a simulation study designed to compare the different measures in various situations are presented.     

Multivariate Control Chart Based on Multivariate Smirnov Test

Robust control charts are useful in statistical process control (SPC) when there is limited knowledge about the underlying process distribution, especially for multivariate observations. This article develops a new robust and self-starting multivariate procedure based on multivariate Smirnov test (MST), which integrates a multivariate two-sample goodness-of-fit (GOF) test based on multivariate empirical distribution function (MEDF) and the change-point model. As expected, simulation results show that our proposed control chart is robust to nonnormally distributed data, and moreover, it is efficient in detecting process shifts, especially large shifts, which is one of the main drawbacks of most robust control charts in the literature. As it avoids the need for a lengthy data-gathering step, the proposed chart is particularly useful in start-up or short-run situations. Comparison results and a real data example show that our proposed chart has great potential for application.     

Screening for prostate cancer using multivariate mixed-effects models

Using several variables known to be related to prostate cancer, a multivariate classification method is developed to predict the onset of clinical prostate cancer. A multivariate mixed-effects model is used to describe longitudinal changes in prostate specific antigen (PSA), a free testosterone index (FTI), and body mass index (BMI) before any clinical evidence of prostate cancer. The patterns of change in these three variables are allowed to vary depending on whether the subject develops prostate cancer or not and the severity of the prostate cancer at diagnosis. An application of Bayes' theorem provides posterior probabilities that we use to predict whether an individual will develop prostate cancer and, if so, whether it is a high-risk or a low-risk cancer. The classification rule is applied sequentially one multivariate observation at a time until the subject is classified as a cancer case or until the last observation has been used. We perform the analyses using each of the three variables individually, combined together in pairs, and all three variables together in one analysis. We compare the classification results among the various analyses and a simulation study demonstrates how the sensitivity of prediction changes with respect to the number and type of variables used in the prediction process.     

Three New Multivariate Process Capability Indices

Different multivariate process capability indices are developed by researchers to evaluate process capability when vectors of quality characteristics are considered in a study. This article presents three indices referred to as NCpM, MCpM, and NMC _PM in order to evaluate process capability in multivariate environment. The performance of the proposed indices is investigated numerically. Simulation results indicate that the proposed indices have descended estimation error and improved performance compared to the existing ones. These results can be important to researchers and practitioners who are interested in evaluating process capability in multivariate domain.     

Multivariate Synthetic |S| Control Chart with Variable Sampling Interval

A variable sampling interval (VSI) feature is introduced to the multivariate synthetic generalized sample variance |S| control chart. This multivariate synthetic control chart is a combination of the |S| sub-chart and the conforming run length sub-chart. The VSI feature enhances the performance of the multivariate synthetic control chart. The comparative results show that the VSI multivariate synthetic control chart performs better than other types of multivariate control charts for detecting shifts in the covariance matrix of a multivariate normally distributed process. An example is given to illustrate the operation of the VSI multivariate synthetic chart.