Ergonomic evaluation of a wheelchair transportation securement system

The Americans with Disabilities Act (ADA) specifies guidelines covering the securement system and environment for wheeled mobility device (WhMD) passengers on the public bus system in the United States, referred to as the wheelchair tiedown and occupant restraint system (WTORS). The misuse or disuse of the WTORS system can be a source of injury for WhMD passengers riding the buses. The purpose of this study was to quantify the risks posed to the bus driver while performing the WTORS procedure using traditional ergonomic analysis methods. Four bus drivers completed the WTORS procedure for a representative passenger seated in three different WhMDs: manual wheelchair (MWC), scooter (SCTR), and power wheelchair (PWC). Potential work-related risks were identified using the four most applicable ergonomic assessment tools: PLIBEL, RULA, REBA, and iLMM. Task evaluation results revealed high levels of risk to be present to drivers during the WTORS procedure. The securement station space design and equipment layout were identified as contributing factors forcing drivers to adopt awkward postures while performing the WTORS task. These risk factors are known contributors to injury and the drivers could opt to improperly secure the passengers to avoid that risk.     

Members of the human body prone to musculoskeletal damages: a comparison between the sector of transportation and footwears production

This study present areas of the body more prone to develop diseases by musculoskeletal efforts, ie, RTD, in two companies of Paraiba, Brazil. To this end, was made a comparative analysis with respect to the type of work performed (standing, sitting) and the parts that suffer most discomfort after a day's work in a footwear industry and a bus transportation company. The quanti-qualitative research was conducted through semi-structured interviews with 227 employees in the period 2008 to 2009, having as methodological the tool diagram of painful areas of Corlett and Manenica. It was concluded that the areas most affected by musculoskeletal disorders are located in the neck (9,2%), backs (23,6%), shoulders (14,5%) and legs (11,3%), being usually caused by inappropriate postures, repetitive movements and work station no adequate the anthropometry of the users. Thus, we recommend the adoption of ergonomic measures that enable a healthy and safe environment for workers.     

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.     

Workplace aesthetics: Impact of environments upon employee health?

Associations between self-reported need for aesthetic improvements in the workplace and the need for ergonomic improvement and health factors were investigated to determine the possible impact of aesthetic needs on job performance. The need for aesthetic improvements were compared with the need for ergonomic improvements. All employees at a Swedish broadcasting company were invited to participate in this cross sectional study. Of those who fulfilled the inclusion criteria the participation rate was 74% (1961/2641). Demographic data was obtained from company files and pre-validated questionnaire was used for data collections from the participants. additional questions on needs for improvement were developed, tested for repeatability, and demonstrated to be within acceptable limits. Differences between 'high rank' and 'low rank' aesthetic needs and ergonomic needs were correlated to set ups of demographic, work environmental and organisational and health variables.The perceived needs for aesthetic and ergonomic improvements showed significantly different distributions (p<0.001). Aesthetic needs were more frequently reported than ergonomic needs. There was no significant gender related difference in response distribution of aesthetic or ergonomic needs, whereas differences between occupational groups were shown (0.006 and 0.003). 'High rank' needs for aesthetic improvement were associated to psychologically demanding work, negative work stress, sleep disturbances, problems at work, musculoskeletal pain and lower age. Gender and physical training did not differ between 'high and low rank' responders regarding neither aesthetic nor ergonomic needs. Sick leave was stronger related to ergonomics. The independently tested associations with aesthetic needs were similar to, but fewer than those for ergonomic needs with regard to the variable set ups. Sixteen studied factors out of 24, showed significant difference between 'high and low rank' aesthetic needs, and 21/24 of ergonomic needs, independently tested. The study results show a relation between work place aesthetics and health and well-being. Future work health promotion and prevention may benefit from the inclusion of an assessment of workplace aesthetics.     

Workplace aesthetics: impact of environments upon employee health as compared to ergonomics

Associations between self-reported needs for aesthetic and ergonomic improvements were studied to analyse a possible impact of aesthetic needs on job performance as compared to ergonomic needs in 11 occupational groups. Employees at Swedish broadcasting company were invited to participate in a cross sectional study. 74% (n=1961/2641) fulfilled the inclusion criteria. Demographic data from company files and a pre-validated questionnaire were used. 'High rank' and 'low rank' aesthetic and ergonomic needs were compared. The perceived needs for aesthetic and ergonomic improvements showed significantly different distributions (p<0.001). Aesthetic needs were more frequently reported. No gender related differences were observed. Differences between occupational groups were shown (p=0.006, 0.003).'High rank' needs for aesthetic and ergonomic improvements were similarly associated to psychological demands, stress, pain and age. 16/24 factors showed significant differences between 'high and low rank' aesthetic needs, whereas 21/24 between ergonomic needs. Sick leave was stronger related to ergonomics. The study results show a relation between not only work place ergonomics but also work place aesthetics to health and well-being. Future work health promotion and prevention may benefit from the inclusion of workplace aesthetics.     

Evaluation and control of ergonomics actions in federal public service: the case of FIOCRUZ-RJ

This article presents information about the development of the dissertation. Deals with the production of ergonomic diagnosis in the environments and work processes of an important center of research and development in Public Health, FIOCRUZ. Critically evaluates the performance of a team promoting and facilitating the process of implementing ergonomic changes suggested. Through analysis of documents and statements by some managers and representatives of Human Resources was possible to identify the factors that facilitate and hinder the implementation process, linking them to the organization of the institution and conduct of the agents involved. Finally, it makes a reflection on practice, results and developments involved in the processes of change initiated by the ergonomic actions, proposing its replication along with other institutes of the Civilian Personnel of Federal Public Administration.     

Ergonomic analysis of work activity for the purpose of developing training programs: the contribution of ergonomics to vocational didactics

Questions related to job skills and the teaching situations that best promote skill development are investigated by specialists in various fields, notably among them, ergonomists. This paper presents the findings of an ergonomic intervention study whose aim was to develop a meat-deboning training program by taking into account both the training content to be constructed and the working conditions that might facilitate or hinder skill development. One-on-one interviews and group discussions, on-the-job and videotape playback observations, as well as self-confrontation interviews were carried out. Activity analysis revealed major variability in work methods. The reasoning behind the experienced workers' actions and the experiential job knowledge they had developed were brought to light and served to develop the training content. The determining factors in the choice of work methods were identified, allowing adjustments to be made to the working conditions that might hinder skill development. The ergonomic process that implied taking working conditions into account in our study may make a significant contribution to vocational didactics, which is based on the cognitive analysis of work for the purpose of improving the effectiveness of job-skills training.     

The reality of the women who make our lives easier: experience in a company that assemblies electric motors in Venezuela

Objective: intervene a workline throughout ergonomic approach to diminish incidence of Carpal Tunnel Syndrome (CTS). Methods and Materials: an ergonomic intervention study was developed in workstations with highest index of musculoskeletal disorder (MED) associated to cumulative trauma. The Deparis method, Reba and Ocra check list methods were used, also morbility reviewes. National and international ethics criteria were carried out. Results: workers identified 3 fundamental issues using the Deparis method: repetitive activities, postures adopted and uncomfortable furniture. The analysis of the workstation with Reba and Ocra methods before the changes, evidenciated that 56% of postures adopted were high risk postures, the 44% remaining were medium and low-risk. Following the active pause program (APP), furniture changes and work rhythm decrease, was noted that the risk of suffering MED decreased. The morbility review, drop in consults of musculoskeletal system (MES) related to CTS observed. The APP was well accepted by women, but not initially men. Discussion: the research show that when the work rhythm decreases, the symptom of MES related to CTS have a remarkable decrease, also that changes in the furniture, generate great ergonomic differences and changes in the work environment are not possible if workers don't empower the tools to make-it.     

Ergonomic constraints among nursing workers in the sectors of emergency care in two public hospitals in Brazil

The goal of this study was to comprehensively identify ergonomic constraints among nursing workers in two public hospitals in Brazil. We used a qualitative research design and conducted interviews, field observation and performed a subjective questionnaire with nurses of emergency care sectors. The Cronbach α technique was used to determine the internal consistency of the questionnaire. Based on this qualitative study, we identified some ergonomic constraints related to work environment, biomechanics/anthropometrics, work organization and work station (hospital direction).     

The construction of ergonomic demands: application on artisan fishing using jangada fishing rafts in the beach of Ponta Negra

The present article seeks the process of construction of ergonomics demand referring to the artisan fishing activityfound in Ponta Negra beach located in the city of Natal, Brazil. The instruction/construction of demands correspond to the first stage of Work Ergonomic Analysis and allows the understanding of real issues existent in a work situation, rank them and route the providences. The demand presented on this study, features itself as a induced demand, process which some potential demands or hypothetical demands are taken to an organization, after a preview analysis of the work aimed by the study, resulting from a theoretical research (state of the art) and/or from analysis of a reference situation (state of practice), where demands hypothesis are taken in consideration about the pretended work. The demands construction process using interactional methods and techniques, observation methods and techniques and bibliographic research, researches in state of reference or document. This article demonstrates the efficiency of the methodological choice to construct real ergonomic demands and highlights the importance of social construction on that process, which main goal is to refer the ergonomic actions that allow the improvement of work and life conditions for the fishers and sustainability to Jangadeira activity.     

Conceptual design pattern for ergonomic workplaces

In this paper, we analyzed two laboratories of liquid chromatography (LC), separation technique of mixtures and identification of its components, in order to identify projectual gaps relating to the environment and the working station. The methodology used was the ergonomic analysis with interactional and participatory techniques applied during the activity performance. This work incorporated and adapted the concept developed by Alexander (1979)--pattern languages--passing from architectural projects to workstations project and physical arrangement of the work environment. The adaptation of the concept resulted in a list of recommendations, requirements and concepts that have brought design solutions for the problematic aspects observed in the ergonomic analysis. The employed methodology, strongly supported in ergonomics principles, and in interactional and participatory techniques, contributed to achieve our gold that is what we now call Conceptual Standards. The patterns go beyond of a usual model of book a of ergonomics specification, once incorporating the viewpoint of the end user, it is also a set of best project practices and of project management in conception ergonomics.     

The perception of fear when using urban furniture

This article presents a study on the perception of fear related to the use of three different types of urban furniture, qualitatively evaluated based on interviews while people were using them in the city of Porto Alegre, Brazil: the bus shelter, the playground, and the gymnastic equipment. The fear related to the lack of safety of the urban space was associated with the use of the three types of products. The fear experienced by the use of the playground and the bus shelter was related to the occurrence of accidents, since both products are often unsafe and do not fulfill ergonomic parameters. The fear experienced from the use of the gymnastic equipment is related to the possibility of incorrect use of the product and the occurrence of harassment. Both ergonomics and emotion are important aspects to be considered in design, in order to make the use of social/ collective products a pleasant experience.     

The charge of ergonomics--a model according to the influence of ergonomic workplace design for economical and efficient indicators of the automotive industry

The importance of ergonomic workplace design has been rising incredibly. The knowledge of the interaction with a view to many indicators (e.g. operators' health, quality, productivity etc.) in the automotive assembly shop pushed into another thinking of ergonomics and an increasing awareness of economic possibilities relating to benefits and cost savings aligned with ergonomics. The paper discusses exemplary the various indicators and factors which could be influenced by ergonomic workplace design. These factors are linked each other and support the statement of ergonomic efficiency. Thus, the aim of this paper is to present a model which describes that investments in ergonomic work placement acts with preventive measurements, minimization of losses (refinishing operations, compensation money etc.) and extensive economies on the whole company.     

Prevention of musculoskeletal disorders (MSDs) in office work: a case study

Twelve recently built office work stations, where jobs imply continued use of information and communication technologies, were analyzed for ergonomic risk factors. Based on a literature review of ergonomic recommendations for computer and general office work, a checklist was devised for assistance in identifying inadequate ergonomic situations, a process that was informed by pain complaints information. RULA (Rapid Upper Limb Assessment) was selected to estimate the risk of MSDs, considering the criteria of applicability and appropriateness to the case studied. This method was applied by an occupational health and safety technician to the most critical job observed in the workplace. Criticality was estimated through observations aided by the systematic use of a checklist tailored to the specific office scenario. Recommendations for change were provided for implementation in all workplaces in the office, in order to improve work conditions, and guide the setup of a MSD prevention training program.     

Evaluating the effectiveness of ergonomics application

The effectiveness of ergonomics application is achieved in the course of this research by reviewing ergonomics literature, Internet searches and case studies of a number of work related musculoskeletal disorders (WMSD's) and other ergonomic related workplace incidence rate. The results of ergonomic intervention control measures such as engineering controls, administrative controls and personnel protective equipment were also studied. The findings in this paper may help to development model for analysing and solving ergonomic problems in the workplace. It concludes on the need for management to support ergonomics intervention programme for effective cost saving, litigation avoidance and better productivity.     

Ergonomic initiatives at Inmetro: measuring occupational health and safety

This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.     

Analysis of the implementation of ergonomic design at the new units of an oil refinery

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.     

Organizational issues that impact on non-use of equipment for individual protection: a view of ergonomics

The investigative focus of this paper is the issue of non-use of PPE (personal protective equipment) in a trading company of chilled and frozen food products. To conduct the study we have used an ergonomic work analysis that allowed us to highlight important organizational aspects that contribute to the non-use of such equipment. In conclusion, there are suggestions for minimizing problems.     

Ergonomic risks in mining companies: a study in Paraiba/Brazil

The growing concern for the welfare of workers in the work environment, the importance of widespread use of ergonomics in the different sectors of industry. Yet most corporate practices that work with rudimentary or great need for human handling of materials is not fully in line with the ergonomic aspects. Given this, this article aims to identify ergonomic hazards in mining to later propose improvements in the process. After a series conducted plant visits, found that workers are exposed to various ergonomic risks, which entails the need for new healthy practices in the workplace. Finally, a series of proposals are submitted in order to avoid possible occupational diseases.