Ergonomic evaluation of the preparation of cuttings and minicuttings for eucalyptus seedling production, with the use of scissors

This study was conducted in a nursery for eucalyptus seedling production in a forest Company, located in the southern state of Bahia, Brazil. It aimed to evaluate the ergonomic conditions of the preparation of cuttings and mini-cuttings with scissors for Eucalyptus seedling production to increase well-being, satisfaction and safety and minimizing the occurrence of occupational diseases, also improving the process efficiency and final product quality. Environmental conditions, levels of noise, postures, RSI risk and physical workload were assessed. The environmental conditions complied with the recommended norms, except at certain times of day, when workers should make compensation breaks. The workers that collect minicuttings presented postures classified as normal by OWAS. On the other hand, the posture of workers dealing with cutting preparation requires corrections in a short run. The workers were subjected to moderate RSI risk due to the high degree of repeatability found. The physical workload was classified as mild, with no need for ergonomic interventions.     

Ergonomics and workplace design: application of Ergo-UAS System in Fiat Group Automobiles

Since 2008 Fiat Group Automobiles has introduced Ergo-UAS system for the balancing of production lines and to detect ergonomic issues. Ergo-UAS system integrates 2 specific methods: MTM-UAS for time measurement and EAWS as ergonomic method to evaluate biomechanical effort for each workstation. Fiat is using a software system to manage time evaluation and ergo characterization of production cycle (UAS) to perform line balancing and obtain allowance factor in all Italian car manufacturing plant. For new car models, starting from New Panda, FGA is applying Ergo-UAS for workplace design since the earliest phase of product development. This means that workplace design is based on information about new product, new layout, new work organization and is performed by a multidisciplinary team (Work Place Integration Team), focusing on several aspects of product and process: safety, quality and productivity. This allows to find and solve ergonomic threats before the start of production, by means of a strict cooperation between product development, engineering and design, manufacturing. Three examples of workstation design are presented in which application of Ergo-UAS was determinant to find out initial excessive levels of biomechanical load and helped the process designer to improve the workstations and define limits of acceptability. Technical activities (on product or on process), or organizational changes, that have been implemented in order to solve the problems are presented. A comparison between "before" and "new" ergonomic scores necessary to bring workstations in acceptable conditions were made.     

Analysis of the compensatory postures adopted by day caregivers through OWAS-Ovako Working Posture Analysing System

The Ergonomic Work Analysis reports that there are many activities performed by the professional caregivers and that they are exposed to physical and psychological overload. This situation favors the emergence of pain which influences the quality of life in the work place. In this way, the objective of this study was to verify the main postural constraints adopted by caregivers in public day cares. Visits were conducted in 28 day cares aiming at performing an interview to 126 caregivers who have been working for more than 4 years. From the questionnaire it was found that 80% of the participants refer some sort of pain, being 42% in the trunk, 33% in the shoulder and 25% in the lower limbs. The data from OWAS method showed that from the total of 30 postures performed during the work One could see that the main postures adopted by the caregivers were: flexion, lateral inclination and rotation of the trunk and most of the time they are standing. These movements, when bad performed, can lead to injuries in the lower limbs, upper limbs and trunk. It's necessary more attention to these workers.Thought preventive ergonomic actions to reduce pain symptoms and promote a work in health and safety.     

The effects of workstation changes and behavioral interventions on safe typing postures in an office

The purpose of the present study was to determine the effectiveness of an ergonomic and behavioral safety intervention for improving participants' safe typing postures in a library office setting. A single-subject multiple baseline design across five participants was employed to evaluate the effects of the four independent variables (workstation adjustment, equipment trial (rollermouse mouse alternative), peer observations, and graphic feedback). Six participant postures were observed repeatedly while participants worked at their workstations throughout the study. Each of the interventions resulted in improvements in safety for more than one posture compared to the previous phase. Results of the study indicate that a comprehensive ergonomic program that includes a workstation adjustment and a behavioral safety approach may be helpful to produce maximum improvements in employees' safe ergonomic postures.     

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.     

Ergonomic considerations in school environments - the need for widening the scope

Behaviour patterns specific to children pose them at greater risk of environmental hazards than adults. Ergonomics is the science of matching human interaction with the proximate environment. Conventionally ergonomic principles were applied on adult work places to ensure safety of the working environment. With emerging scientific evidence, school environments are being a focus to apply ergonomic principles. Children spend more time within schools during critical developmental stages of their life. Everybody feels that the schools are safe places, but they are not. A multitude of ergonomic hazards have been identified in school settings. Widespread mismatches between anthropometry and school furniture, heavy schoolbag carriage and unhealthy bag behaviour are significant. Negative effects range from general tiredness, musculoskeletal pains, spinal deviations, shoulder level shifts, injuries and psychological disturbances. There are fragmented efforts to widen ergonomic concepts to health care professionals and other stakeholders of child health. Addressing ergonomic issues will ensure that children, the future productive generation contributing to economic growth and development of a country, are provided with opportunities in a healthy environment. This paper emphasizes the need for a concerted effort on widening the scope of ergonomics to cater for the evolving demand.     

Ergonomic evaluation of processes and products in the manufacture of upholstery

This study aimed to perform an ergonomic evaluation of industrial processes and products - upholstered sofas - produced in the furniture cluster of Ubá-MG. The used material was collected from two sofas upholstered industries associated with the union of the furniture industries of Ubá region, located in Minas Gerais estate, Brazil. As for the product were evaluated dimensionally 29 upholstered sofas, with 12 being produced by industry "A" and 17 being produced by industry "B". As for the process, were evaluated: the socioeconomic profile of the worker and environmental factors of lighting and noise. The main results of this study showed that the upholstered sofas produced by industries, in general, fulfilled to the recommendations set out in the work in relation to the backrest height and useful seat depth. All the sofas, however, proved to be inadequate in relation to the seat height to the floor and the dimensions of the armrests Regarding environmental aspects, it was observed that in both industries, the activities in most jobs are performed under adverse conditions to the health and safety of workers and nonconformity with the limits set by Brazilian regulatory standard used in this work.     

The amount of ergonomics and user involvement in 151 design processes

Ergonomics, usability and user-centered design are terms that are well known among designers. Yet, products often seem to fail to meet the users' needs, resulting in a gap between expected and experienced usability. To understand the possible causes of this gap the actions taken by the designer during the design process are studied in this paper. This can show whether and how certain actions influence the user-friendliness of the design products. The aim of this research was to understand whether ergonomic principles and methods are included in the design process, whether users are involved in this process and whether the experience of the designer (in ergonomics/user involvement) has an effect on the end product usability. In this study the design processes of 151 tangible products of students in design were analyzed. It showed that in 75% of the cases some ergonomic principles were applied. User involvement was performed in only 1/3 of the design cases. Hardly any correlation was found between the designers' experience in ergonomic principles and the way they applied it and no correlations were found between the designers' experience in user involvement and the users' involvement in the design process.     

Ergonomic recommendations and their role in cardiac sonography

Musculoskeletal disorders (MSDs) have been recognized as a serious hazard to the health and safety of sonographers. Recommendations have been made on ways to reduce and prevent the frequency and severity of these disorders. The purpose of this study was to ascertain the impact ergonomics has had on the prevalence of MSDs among cardiac sonographers. Three hundred randomly selected Registered Diagnostic Cardiac Sonographers were surveyed. Eighty-one respondents completed the survey. The majority of the sample population was female with an average age of 40 and job tenure between 6-15 years. Ninety percent of respondents reported musculoskeletal pain/discomfort while scanning. Seventy-three percent of respondents perceived a need for ergonomic interventions. The majority of respondents were aware of previously recommended ergonomic interventions and had implemented what was feasible. Still, the experience of pain and discomfort, and incidence of MSDs remains exceptionally high for this occupation. It appears that recommended ergonomic interventions have not had a significant impact on improving the health and safety of cardiac sonographers.     

Ergonomic analysis in cold storage rooms: a study of case

The human work possess a history and, in this dimension, the man is submitted to the conditions that confer it physical and psychological consequences. The activity of work in the present time imposes adverse labor conditions. The ergonomics is a science that it aims at to study the real activity of the work with sights its transformation. This study it was carried through in a sector of processing of meats in a Agroindustry, with the objective to analyze ergonomically the conditions of work and the possible risks it greets it of the workers. It was verified that in the accomplishment of the activities it had an overload of the musculature of superior members, where if it verified the requirement of repetitive movements during four working hours. Also observed the organization of the work, the position of the employees and way to carry through the activities. With the study we conclude that the ergonomic risks in the sector are related to the position during the accomplishment of the activities, requirement of repetitive movements, e the cold that affects the muscular control, reducing some motor abilities as the dexterity and the force.     

Design and implementation of ergonomic performance measurement system at a steel plant in India

Management of Tata Steel, the largest steel making company of India in the private sector, felt the need to develop a framework to determine the levels of ergonomic performance at its different workplaces. The objectives of the study are manifold: to identify and characterize the ergonomic variables for a given worksystem with regard to work efficiency, operator safety, and working conditions, to design a comprehensive Ergonomic Performance Indicator (EPI) for quantitative determination of the ergonomic status and maturity of a given worksystem. The study team of IIT Kharagpur consists of three faculty members and the management of Tata Steel formed a team of eleven members for implementation of EPI model. In order to design and develop the EPI model with total participation and understanding of the concerned personnel of Tata Steel, a three-phase action plan for the project was prepared. The project consists of three phases: preparation and data collection, detailed structuring and validation of EPI model. Identification of ergonomic performance factors, development of interaction matrix, design of assessment tool, and testing and validation of assessment tool (EPI) in varied situations are the major steps in these phases. The case study discusses in detail the EPI model and its applications.     

Analysis of the implementation of ergonomic design at the new units of an oil refinery

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.     

A single-subject design of ergonomic intervention effectiveness for university employees in a new facility

As clinicians are searching for evidence to support their practice interventions, it is sometimes hard to find the "real-world" studies that incorporate the complexities of actual practice. Following calls in the public health, nursing and medical literature for clinicians to participate in practice-based evidence, this pilot study explores the effectiveness of a single-subject design for practice-based evidence. Twenty-five "well" university employees participated in an ergonomic intervention over the course of one academic semester that consisted of a 15 min ergonomic intake session, a 45 min group hands-on ergonomic educational session and a 15 min individual ergonomic consult in their offices. Participants were sent postural comfort surveys weekly and their subjective ratings were analyzed to determine the effectiveness of the intervention to decrease their perceived postural discomfort at a computer work station. Twenty-one of the twenty-five participants reported an improvement in postural comfort over the course of the study. This pilot study suggests that further investigation needs to be conducted to determine the effectiveness of hands-on ergonomic education and consultation for well populations working at computer workstations.     

Eletrobras management program in ergonomics: the pursuit of excellence through maturity levels

Ergonomics for Eletrobras arose from the need in having an environment more suitable to the characteristics and circumstances of employees, in compliance with Regulation Standard no. 17 - Ergonomics (NR17) of the Ministry of Labor and Employment. Being a mixed economy company with regionalized anthropometric characteristics of its employees, the study of ergonomic adjustments and improvement of the concept of Ergonomics were and have been of great importance to the company's production environment. These advances have contributed to the development of specific technical criteria for the purchase of furniture and work tools (accessories), apart from their possible effects on the user. Ergonomics has been perceived as a technical-scientific tool, aimed to study labor interactions, new technologies and specific characteristics of the activities performed. To meet these demands a multidisciplinary Ergonomics Committee was created in Eletrobras, and effectively established the Ergonomics Management Program in the company; This program is marked by well-defined phases with great success in making use of these studies for other types of corporate activities and also facilitating the program control and its maturity levels, even at a business level.     

Ergonomic work analysis of urban bus drivers in Rio de Janeiro city

This article is the result of a case study on ergonomic work analysis carried out in an urban bus company located in Ilha do Governador, Rio de Janeiro. The methodology used in this work follows the French-tradition Ergonomic Analysis of the Work (EWA) combined with the best tradition from anglo-saxon ergonomic work analysis. The situated diagnosis was performed to provide relevant information about the work conditions of a bus driver.     

Ergonomic tridimensional analysis: critical ergonomic factors identification in a commercial environmental

The Ergonomic tridimensional analysis (ETdA) was developed to be used as an auxiliary tool on the ergonomic intervention. It was specially designed for commercial areas with free circulation of people. Due to that, the client, the third ETdA dimension, becomes an important element and their opinions relevant in the ergonomic analysis. The remains two ETdA dimensions, professionals and analyst, play an identical role as in the traditional occupational ergonomic analysis. For each of these dimensions, specific observation tools were assembled: an ETdA questionnaire, an evaluation form and a checklist for direct and indirect observations. The variables that allow the ETdA operability are identified as Ergonomic Factors (EFs). A case study is presented identifying, for each dimension, the critical EFs. This will allow the design of the weighting table, where the influence of each dimensions results is measured, stressing the important role of clients on ergonomic issues.     

Blueprint for ergonomics

Worker safety and health, and productivity and efficiency on the job can be greatly impacted by the application of ergonomics. This article outlines the decision making process for implementing ergonomic change in the workplace. Ergonomic principles, as well as risk factors for the upper extremity and low back are identified. Three ergonomic measurement methods are presented including the National Institute for Occupational Safety and Health (NIOSH) 1991 Revised Lifting Guidelines, Rodgers's Functional Job Analysis Technique, and the Moore and Garg Strain Index. Ergonomic solutions are discussed and additional factors to consider when designing ergonomic changes are identified.     

Comparison of ergonomic risk assessment outputs from Rapid Upper Limb Assessment and the Strain Index for tasks in automotive assembly plants

This paper compares the ergonomic risk assessment of a task for the upper extremities as determined by Rapid Upper Extremity Assessment (RULA) and the Strain Index (SI). The ergonomic risk to the upper extremities of 244 automotive assembly plant tasks were evaluated using RULA and SI. The outcomes of each tool were compared for each task. Results from this study provide practical insight into the methods used in each tool. This study compared only the ergonomic risk outputs from each tool; it does not pursue the question of which tool best predicts injury. The kappa score was 0.11, indicating little agreement between the outputs of the two tools. This is supported by the lack of monotonicity with a gamma score of 0.1. These results indicate that the risk assessment outcome of these two ergonomic assessment tools for the upper extremities do not agree.     

Biomechanical modelling and evaluation of construction jobs for performance improvement

Occupational risk factors, such as awkward posture, repetition, lack of rest, insufficient illumination and heavy workload related to construction-related MMH activities may cause musculoskeletal disorders and poor performance of the workers, ergonomic design of construction worksystems was a critical need for improving their health and safety wherein a dynamic biomechanical models were required to be empirically developed and tested at a construction site of Tata Steel, the largest steel making company of India in private sector. In this study, a comprehensive framework is proposed for biomechanical evaluation of shovelling and grinding under diverse work environments. The benefit of such an analysis lies in its usefulness in setting guidelines for designing such jobs with minimization of risks of musculoskeletal disorders (MSDs) and enhancing correct methods of carrying out the jobs leading to reduced fatigue and physical stress. Data based on direct observations and videography were collected for the shovellers and grinders over a number of workcycles. Compressive forces and moments for a number of segments and joints are computed with respect to joint flexion and extension. The results indicate that moments and compressive forces at L5/S1 link are significant for shovellers while moments at elbow and wrist are significant for grinders.     

Ergonomic adequacy of the baby nursery of child development center located in UFSC - Florianópolis

A study in the educators' work station at baby nursery of NDI/UFSC, located in Florianópolis, was conducted using the Work Ergonomic Analysis methodological tool. The demand considered was the educators' physical exhaustion caused by the weight carried when taking care of the babies, the postures assumed during the labor activity and the spatial arrangement of the baby nursery. Thinking ergonomically, the spatial arrangement is directly associated to three factors: the formal aspect of the environment, the esthetic aspect including colors and finish quality and the ease of understanding involved in the baby nursery labor. By the ergonomic adequacy it is possible to assert that if were established better conditions of posture and comfort for the educators, as well as satisfactory technical and operational information to carry out the activities, greater safety and welfare would be provided to the babies, the main focus of the work.