THE U.S. LABOR INCOME SHARE AND AUTOMATION SHOCKS

The causes and consequences of the 1964–2016 swings in the U.S. labor income share/labor share (LS) are parsed through the lens of a structural model estimated on aggregate and LS series jointly. Where conventional models fall short, the present model yields a counter-cyclical LS unconditionally and in response to demand and monetary policy shocks, as well as a small wage pro-cyclicality, via moderate wage indexation. Shifts in automation, workers' market power, investment efficiency, and the relative price of investment account for 54%, 24%, 6%, and 4% of LS fluctuations, respectively. Automation shocks explain the lion's share of the post-2007 cyclical LS tumble and 11% of output cycles, and generate a distinctive counter-cyclical labor response. (JEL E32, E25, E52)     

Food Security: The Elaboration of Contested Claims to a Consensus Frame*

Abstract This article demonstrates Gamson's claim that behind the apparent agreement implied by “consensus frames” lies considerable dissensus. Ironically, the very potency of consensus frames may generate contested claims to the ownership of a social problem. Food security is a potent consensus frame that has generated at least three distinct collective action frames: food security as hunger; food security as a component of a community's developmental whole; and food security as minimizing risks with respect to an industrialized food system's vulnerability to both “normal accidents” as well as the “intentional accidents” associated with agriterrorism. We show that each collective action frame reflects internal normative variation identified here with Goffman's “keying” concept. These keys suggest power differentials in the endorsement or critique of dominant institutional practices. Each frame and associated keys reflect distinct sets of interests by collective actors, such as demands for substantively different applications of science and technology. The prognostic framing of the community food security movement coincidentally holds potential for reducing not only the accidental risks of productivist agriculture but also the uncertainty induced by the risk of terrorist exploitation of those vulnerabilities. The article explores power differentials and variable levels of oppositional consciousness as mechanisms by which keys generate contentious politics within frames while serving as potential bridges between frames. This contested ownership of food security has implications for the associated movements' and organizations' capacity to influence the structure of the agrifood system as well as the broader socioeconomic organization of rural regions.     

Back to the future: A continuity of dialogue on work and technology at the ILO

Concerns about technological unemployment are not new. Specifically, policy debates surrounding automation processes in the 1960s reflected both optimism and concerns about the job-destroying potential of technology. Studying the archives, and in particular the information collected by the Bureau of Automation, shows that many of today's policy proposals were originally raised at the ILO during that period, even though they were never translated into regulatory policy. This article thus suggests that reopening this past dialogue may reveal useful insights for addressing current challenges, and enable us to achieve the world of work we wish to see in the future.     

Why the Fukushima Nuclear Disaster is a Man‐made Calamity

The Fukushima nuclear disaster caused by the earthquake on 11 March 2011 is a man‐made calamity because technological failures were derived from the failure of multiple social safeguards. The insufficient social safeguards can be explained by highlighting the “nuclear complex.” Institutional frameworks assured the enormous economic power of electric power companies and the Ministry of Economy, Trade and Industry (METI). Using this power, the electric power companies effectively manipulated information, maintained strong political power and constructed the nuclear complex, which has imposed an overwhelming influence on the central sphere of control at a national level and has put economic profit before safety. Regulations for safety have not been insufficient because the organization charged with nuclear safety belongs to the nuclear complex. Consequently, Regulatory Guides concerning reactors defined by the government have not accounted for catastrophic accidents. Philosopher Mori Arimasa's concept of "binary combination" provides us with an insight into a profound sociological reason for the Fukushima nuclear disaster because it highlights the immaturity of subjectivity and the root of irresponsibility in Japanese society. Binary combination is defined as a relationship between two persons that is characterized by intimacy and a vertical relation. Binary combination tends to produce a group or organization that is closed to outsiders and often shows indifference as well as insensitivity to outside opinions. In order overcome the defects of energy policy as well as the decision‐making process, and to achieve a sustainable society, it is necessary to promote an energy paradigm shift and reforms for decision‐making through the enrichment of the public sphere.     

Assessing the Impact of Office Automation on Employee Productivity and Health

The pressure to increase productivity is driving many industries to automate. By the year 2000 experts foresee that the VDT will be as common as the telephone is today on the desks of office workers. Just as the mechanization of farm and factory work changed our society and economy in the past, so will the automation of white-collar work influence and change the work process and society. This paper will explore the productivity, cultural, health and mental health issues of office automation. We also discuss the role EAP's can play to help business ameliorate or avoid potential problems associated with the darker side of office automation.     

Using practical ergonomic evaluations in the restaurant industry to enhance safety and comfort: a case study

Restaurant employees must deal with loud noise, busy environments, difficult customers, heavy, awkward, sharp, and hot objects, repetitive motions, and stress on various joints, all of which can lead to fatigue, sudden accidents, and longterm musculoskeletal injury. The goal of this case study was to assess the risk of injuries and accidents from conducting various tasks in the restaurant, specifically carrying/lifting, table management, and polishing silverware. The nine participants were servers at a local country club restaurant. Physical workload was measured by a scale of physical exertion. Cognitive workload was assessed, as well as cumulative trauma disorder risk. Overall results show that there is sufficient risk in some of the tasks to warrant concern. Specific results are discussed, as well as recommendations for improved safety.     

Disabled People in a Newly Industrialising Economy: opportunities and challenges in Malaysia

Malaysia is one of the fastest developing countries in the world and by the year 2020 it will become an industrialised nation according to the Malaysian government's strategic plans. This dynamic situation poses numerous opportunities and challenges for disabled people in Malaysia. Two positive outcomes are opportunities in the employment sector as well as infrastructure developments. However, there are new challenges especially with regards to mainstreaming of educational and vocational training along with the need for a dynamic placement service. The rise in industrial accidents creates a new challenge, along with the changing demographic trends which could have a negative impact on disabled people. What is striking is that disabled people and their organisations are beginning to articulate these changes and making a claim for inclusion in Malaysian society.     

Accidents related to the use of products and services in the city of São Luis, Brazil

This article presents a study on the accidents related to the use of products and services, as recorded at two emergency hospitals at the city S?o Luís, Brazil. The goal of the study was to evaluate the main types and causes of unintentional accidents as well as the more frequent injuries for further improvement of products and services. The study evaluated the victims profile (gender and age), the circumstances (activity, local and time) that lead to the accidents and the type of resulted injury. Non-parametric statistics showed that 83.64% of the accidents were related to products (57.6% of them being consumer products) and 8.6% are related to maintenance services. 57.6% of the victims were children under 15 years old, and 58.4% were male. 50.2% of accidents occurred at home, more often (44.7%) in the afternoon. The most common injury was musculoesqueletal (48.6%), 49.0% being cranioencephalic trauma and 15.2% fractures.     

Hand therapy and ergonomics: integration of approaches in vocational rehabilitation and promotion of decent work in Brazil

Among the indicators of Decent Work in Brazil, the one referring to the "Safe Working Environment" was the only which had no improvement in the time series analyzed by the International Labor Organisation. There is an increased number of accidents with significant economic and social impacts. Given that many of these accidents involve the hands and cause functional sequels, this paper presents an integration between the approaches of Hand Therapy and Ergonomics in order to facilitate the process of rehabilitation and reintegration, as well as acting to prevent further accidents, thus contributing to the promotion of Decent Work in the country, particularly with regard to safety and health at work and equal opportunities.     

Routine deaths: fatal accidents in the oil industry

This paper is a study in the relatively neglected field of the Sociology of Accidents and is concerned with fatalities in the UK Offshore Oil Industry. The purpose of the paper is to demonstrate the social and organizational causes of these accidents. Common sense and expert opinion both present industrial accidents as products of extra organizational abnormality but evidence from this research locates the causes of accidents in work organization and dependence on bureaucratic rationality. In particular it is shown that the hazardous situations in which the accidents occurred were themselves largely the products of two aspects of the formal organization of work, the 'speed-up’and the practice of ‘sub-contracting’. It is demonstrated that the common sense equation of the‘normal’and the‘routine’inhibited recognition of the organization causes of these accidents. Finally it is argued that, since there is little support for the view that the accident were produced by unique working conditions in the offshore industry, it is therefore likely that the causes of accidents in this industry will be found to exist in other industries.     

Tractor accidents in Swedish traffic

The objective of this study is to reach a better understanding of accidents on Swedish roads involving tractors and to suggest ways of preventing them. In an earlier study we analyzed police-reported fatal accidents and accidents that led to physical injuries from 1992 to 2005. During each year of this period, tractors were involved in 128 traffic accidents on average, an average of 7 people were killed, 44 sustained serious injuries, and 143 sustained slight injuries. The number of fatalities in these tractor accidents was about 1.3% of all deaths in traffic accidents in Sweden. Cars were most often involved in the tractor accidents (58%) and 15% were single vehicle accidents. The mean age of the tractor driver involved was 39.8 years and young drivers (15-24 years) were overrepresented (30%). We are now increasing the data collected with the years 2006-2010 in order to study the changes in the number of accidents. Special attention will be given to the younger drivers and to single vehicle accidents. Based on the results we aim to develop suggestions for reducing road accidents, e.g. including measures for making farm vehicles more visible and improvement of the training provided at driving schools.     

Nitrogen retention and loss in unfertilized lawns across a light gradient

A desirable function for terrestrial urban ecosystems is the mitigation of nitrogen (N) pollution associated with cities and suburbs. To assist in maximizing this function, identifying locations of sources and sinks of N in the urban environment is crucial to inform management strategies. Lawns are an extensive land cover in urbanized landscapes, and in general, they have demonstrated the capacity to function as a sink for N inputs. How N is cycled by lawns, however, is likely not uniform across the physical heterogeneity or management activities that exist in lawns. We investigated the influence of heterogeneity in light availability on N cycling in lawns that were irrigated but not fertilized. Light availability is affected by tree canopy and built structures and is, therefore, heterogeneous both within individual lawns and among lawns. Light is expected to control N retention and loss through effects on primary productivity. We experimentally examined N regulation over one calendar year by measuring net primary production (NPP), N retention using an isotopic tracer, and N leaching in existing unfertilized lawns under heterogeneous light conditions. We used a budgetary approach to estimate gaseous N loss which we assume is primarily via denitrification. Light functioned as a limiting resource for primary productivity. From low to high light conditions, annual NPP increased 177 to 430 g C?m^?2?y^?1 and retention of N isotope tracer increased from 50 to 65% as a result of increased retention in plants. Nitrate leaching losses were low overall and were not affected by light levels. Light availability regulated the fate of N inputs and unfertilized lawns may function as substantial sinks for reactive N through storage in the terrestrial system and N loss by denitrification. However, whether or not denitrification is generally an N sink will depend on the ratio of non-reactive (i.e., N₂) to reactive (i.e., N₂O, NO) denitrification products. Overall, we find that effective strategies for managing N sources and sinks in cities will likely need to consider light availability, particularly in systems receiving water subsidies via irrigation.     

GIS and development control system for a local authority in Malaysia

The process of development control involves a technique for the systematic compilation of expert quantitative analysis and qualitative assessment of project land use and property development viability, including its effect on the surrounding area, and the presentation of results in a way that enables the importance of the predicted results, and the scope of modifying or mitigating them to be properly evaluated by the relevant decision making body before a planning permission is rendered. Taking the local authorities in Malaysia as an example, this paper will discuss and demonstrate the development of a GIS database and its integration and application for development and building control. The first part of the paper examines the functions of local authorities particularly in the context of development control. In this study, the procedure involved in granting a planning permission as well as enforcement becomes the main focus because it determines the bulk of the system design. The study identifies seven sub-systems namely planning permission, building control, planning enforcement, geospatial database, information kiosk, document processing and presentation sub-systems. The system is developed using a combination of office automation, CAD, GIS, multimedia and other software packages. This paper will focus on the development of the GIS for the purpose of development control. The components of the GIS database include land information, buildings, existing developments, planning information, development plans, utilities, community facilities, transportation, environment and the socio-economy database. The GIS database will be used at every stage of development control, for example, in initial discussions, registration, invitation of objections, the development control process, the consideration by Technical Committee and the consideration by Planning Committee. It is anticipated that the GIS database could be used by many parties involved in the process as a reference point in evaluating a planning submission. Having access to the database will provide flexibility in assessing a proposed development and deciding on the overall urban growth management programme in the most cost-effective manner. The system will also provide transparency and consistency in the development control procedure.     

Postural analysis of workers in a typical meat processing company in Brazil

Companies have increasingly sought strategies that will ensure a more competitive position in the marketplace. Among these strategies adopted by companies include the health and welfare of the worker, factors currently valued by consumers, especially those of most demanding market. Thus, the postural analysis is of great importance and interest because it is the study of positioning related to body parts like head, torso and limbs, capable of producing loads that may be excessive or insufficient causing disturbances in the muscle skeletal system worker. The aim of this study was to perform a postural analysis of the main sectors of workers (slaughter, cutting room, special cuts, packaging and dispatch) of a typical refrigerator pig industry in Brazil during the execution of their daily activities as well as developing proposals to minimize and/or eliminate the diseases and accidents. The study followed the safety norms of Brazilian Ministry of Labor and Employment. The posture analysis used the OWAS (Ovako Working Posture Analyzing System) methodology. The postures assumed by workers in the sector of packaging were as the most in need of emergency and quick action.     

Advanced interaction media in nuclear power plant control rooms

The shift from analog to digital Instruments (related mainly to information visualization) and Controls in Nuclear Power Plant Main Control Rooms (NPP MCR) is a central current topic of investigation. In NPP MCR, digitalization was implemented gradually, analog and digital systems still coexisting for the two main systems related to safety--Safety Instruments and Control System (SICS) and Process Instruments and Controls System (PICS). My ongoing research focuses on the introduction of Advanced Interaction Media (AIM) such as stereoscopic 3D visualization and multi-touch surfaces in control rooms. This paper proposes a Safety-Centric approach for gathering the Design Rationale needed in the specification of such novel AIM concepts as well as their evaluation through user tests. Beyond methodological research, the final output of the current research is to build an experimental simulator aiming to enhance improvements in Human-Systems Integration (HSI). This paper provides an overview of the topics under consideration.     

The Nuclear Power Plant as God

There is a theological meaning to the disaster at the Fukushima nuclear power plants. I can clarify this meaning through a sociological investigation of the significance of nuclear power in post‐war Japan. First, as preparation, I will compare the ideology of Christ to that of John the Baptist. Christ thought that we had already arrived at the Kingdom of God. This idea led to the activist aspect of Christ. Second, I will show that nuclear power was considered as a key for the gate to the Kingdom of God in Japan. We can distinguish three stages in Japan's post‐war period: the ideal, the fictive and the impossible. It was nuclear power that embodied the ideal during the first era. Third, I will explain how the Japanese fascination with nuclear power has been compatible with Japanese aversion toward it. For the Japanese, the nuclear power plant seemed to be like non‐alcoholic beer. In the fourth and fifth parts, I will prove that the nuclear disaster implies a message equivalent to Christ's announcement. Theodicy is an answer to the question of irrational misfortune in a world created by God. However the Book of Job as ultimate theodicy shows paradoxically the incompetence of God. This situation is similar to the disaster at Fukushima, which demonstrated the incompetence of nuclear power (as God). The distance between Job and Christ is short, because if God plays the role of Job himself, it becomes Christ. We will explain why Christ's message can be a call for revolutionary social movement.     

On heeding the lessons of the past and adapting them to the present: a strategy for an effective Fifth International

ABSTRACT

The establishment of a Fifth International that would coordinate and provide support to progressive forces from around the world as proposed by the late Samir Amin is long overdue, but its effectiveness will hinge on its ability to heed the lessons of the past and adapt them to the present. This essay argues that an effective Fifth International should move beyond the simplistic and exaggerated interpretations of the capitalist ruling classes wielding absolute power over the world system that leave the revolutionary shortcut as the only viable path forward, and should instead embrace the path of incremental progress and focus on providing support in educating, organizing, and agitating with the specific aim of securing electoral gains. These activities should be oriented globally, but priority should be given to the core, as it is in the core that the key disciplinary structures of capitalist power reside, and without progress against them, progress anywhere else can only be limited. Finally, an effective Fifth International should be organized around a long-term agenda which is at once inspiring and ambitious, broad and flexible, but also safe and familiar, as well as a short and medium term agenda made up of specific policy objectives that not only noticeably improve the lot of the masses, but also undermine the ideological and material bases of power of the capitalist ruling classes.     

Retaining the Benefits of Government–Nonprofit Contracting Relationship: Opposites Attract or Clash?

The benefits and negative consequences of government–nonprofit contracting are well documented. From the literature, we know that government and nonprofits can demonstrate contradictory organization-level characteristics. Some argue that these contradictions make government and nonprofits complementary partners, but empirical evidence reveals the potential loss of nonprofit voluntariness. How does one harvest the alleged benefits of the government–nonprofit relationship while minimizing the potential loss of nonprofit voluntariness? Through the qualitative investigation of one nonprofit, this study identifies seven types of organizational-level differences between the government and the nonprofit. These conflicts are manifested by three forms of power struggle. This illuminates that power struggles are the root cause of the potential loss of nonprofits’ voluntariness. The author argues that as long as nonprofits depend on the government for resources, power struggles will persist and voluntariness will be at risk; hence, addressing resource dependence is the key to answering our research question.     

Referenda as a Catch-22

The result of a referendum delivers a significant amount of information about social preferences to each composite member of the society. This paper argues that, beyond this obvious fact, the choice of an authority not to offer a referendum, although permitted to do so, may enhance the information individuals posses about social preferences as well. The addition of a referendum option in the rules of a game, that is, by enabling the authority to offer referenda at will, results in an assured re-election of the authorities that implement socially beneficial policies and reduces the likelihood of the re-election of the authorities that implement socially detrimental policies. In a sense, by allowing an authority to offer referenda, an inescapable Catch-22 is introduced in the game, which inhibits the re-election of a measure of “bad” authorities and, thus, confirms that one of the main benefits of a democratic institution is the preservation of “good” authorities in power. It is, finally, demonstrated that non-binding referenda are more influential (in the directions described above) than binding referenda as far as the authority’s re-election prospect is concerned.     

Ergonomics, automation and logistics: practical and effective combination of working methods, a case study of a baking company

The aim of this study was to combine three different analytical methods from three different disciplines to diagnose the ergonomic conditions, manufacturing and supply chain operation of a baking company. The study explores a summary of comprehensive working methods that combines the ergonomics, automation and logistics study methods in the diagnosis of working conditions and productivity. The participatory approach of this type of study that involves the feelings and first-hand knowledge of workers of the operation are determining factors in defining points of action and ergonomic interventions, as well as defining opportunities in the automation of manufacturing and logistics, to cope with the needs of the company. The study identified an ergonomic situation (high prevalence of wrist-hand pain), and the combination of interdisciplinary techniques applied allowed to improve this condition in the company. This type of study allows a primary basis of the opportunities presented by the combination of specialized methods of different disciplines, for the definition of comprehensive action plans for the company. Additionally, it outlines opportunities for improvement and recommendations to mitigate the burden associated with occupational diseases and as an end result improve the quality of life and productivity of workers.