Ergonomic evaluation in a values transportation company in Venezuela

The objective was to analyze the work activity and identify risk factors that could account for musculoskeletal disorders in the upper extremities, shoulder and neck of workers of a transport values company in Venezuela. The methods used were: collective interview, tasks observation, evaluation of posture with RULA method and evaluation of repetitive motions with the OCRA method. Five workstations were evaluated. Main problem perceived by workers was: exposure to chemical and biological hazards when handling paper money and coins; inadequate chairs and close supervision. The postures level risk was 1 or 2 for the RULA scale. Only two workstations showed ligth and medium risk level by OCRA method. Conclusion: The factors identified that could explain the musculoskeletal changes were: wrist repetitive flexion and extension, shoulder elevation, lifting weight above shoulder height, elbow repetitive flexion and extension, neck flexion, extended work journey, work overload, high responsibility and strict supervision by a video camera.     

Ergonomic and individual risk evaluation

The ergonomic risks constitute a vital aspect of study and prevention for the worker's health, especially for people with different capacities. Very job has and implies certain type of risk for the worker's health, depending on the conditions it is done with the use of tools or without them. Aplicated techniques: posturogram, baropodometry, Schober test, biocinemátic chain test, Fukuda test, propioceptiva plataform in personnel with special capabilities.     

Ergonomic evaluation of postural stress in school workshop

The objective of this study is to compare the evaluation of postural analysis between a self-report questionnaire and physical assessments methods for students aged 13 to 15 years old in school workshop. 336 students were volunteered as participants to fill in the questionnaire and being observed in the workshop. Total of 104 positions were selected and analyzed while students performing their tasks. Questionnaire data was examined to specify the prevalence of postural stress symptoms. The relationship of postural stress by physical assessment methods (RULA and REBA methods) was defined to identify the risk level of students' working posture. From the results, comparison of four factors categorized from total of 22 questions among ages, the mean values were lower for 13 years old students meaning that they were faced higher posture problems while using the workstation. The obtained results from both physical assessment methods and questionnaire analysis have identified 13 years old students faced higher risk exposure. Analysis results emphasized the fact that self-reports questionnaire method has almost accurate as postural evaluation methods to identify physical risks in workplace. The result also shows that an intervention is needed to overcome the posture problems.     

Ergonomic assessment of porridge roaming sale system

This paper makes suggestions for the realization of an ergonomic intervention, guided by the method of Moraes and Mont'Alv?o (2009), in the system of street vending of porridge, to improve the working conditions of this sales segment. Specifics are given about this practice and its problems, from ergonomic analysis comes to suggestions for improvements to be applied to a new system.     

Ergonomic evaluation of laparoendoscopic single-site surgery ports in a validated laparoscopic training model

Although laparoendoscopic single-site surgery (LESS) is feasible among expert laparoscopic surgeons, it poses many technical challenges not seen in conventional laparoscopy (CL). Recent technological advancements in single-incision instrumentation have created more interest and widespread usage of LESS. However, neither LESS nor its novel instrumentation have been thoroughly studied or evaluated using human factors and ergonomics techniques. Consequently, the aim of this study was to compare the physical performance of LESS to CL using a standardized task. Wrist and elbow angular movements, range of motion and physical discomfort were assessed for 24 novice participants. There were no significant differences for physical comfort/discomfort ratings or elbow and wrist flexion/extension range of motion between CL and LESS. However, wrist radial/ulnar range of motion was significantly greater in LESS compared to CL (p < 0.05). Additionally, wrist radial/ ulnar range of motion was significantly greater using the SILS Port compared to the GelPOINT (p < 0.05). Although further investigation is needed, LESS resulted in greater wrist deviation and range of motion due to the close proximity of the instruments, restrictive nature of the single-port devices, and the need to achieve adequate instrument triangulation and visualization.     

Ergonomic evaluation of a situation of coexposure to solvents and noise in a printing of flexible packaging

The purpose of this paper is to present an ergonomic evaluation of a situation of co-exposure to solvents and noise in a flexible packaging printer. We discuss how such an approach carried out in the field of printing industry work has made it possible to highlight serious shortcomings in the effectiveness of the prevention actions that are supposed to protect workers from chemicals risks and noise. The ergonomic analysis identified a strain working conditions. Indeed, some jobs expose to noise and toxic risk. Lamination operations, winding and cutting are purveyors of noise. Some physical and spatial factors contribute to amplify the toxic risk. The not wearing of personal protective equipment (PPE) by the operators maybe explained by the fact that it doesn't any possibility to do "otherwise". Indeed, operators adopt a compromise to achieve the objectives of production to the detriment of their health and safety. These constraints are causing gene and psychosocial factors. The interviews revealed a state of psychosis in the workshop, which was accentuated by the reclassification of an operator which has created a climate of panic and anxiety especially for older operators who have more than 20 years exposed to handling of toxic and more exposure to high noise level.     

Ergonomic evaluation of the environment: a case study in a control room of the hydroelectric sector

Representative systematic evaluation studies of the workspace and the extent to which that space is suitable for performing tasks have been developed by professionals engaged on finding evidence as to the importance of users and designers being joint participants in drawing up projects. In this context, this paper sets out to evaluate the environment of a control room in the hydroelectric sector, based on a multidisciplinary method which integrates ergonomics, architecture and environmental psychology so as to assess the influence of space on the user, and thus to identify the user's level of satisfaction with it. It was observed that some adaptation strategies of the space for activities were not implemented satisfactorily, resulting in the need for further studies on making workspaces suitable.     

Ergonomic evaluation of novel tool for snap-off the neck of ampoule

Needlestick and Sharps Injuries (NSI) represent an important workplace issue in contemporary health care. Present study provided the new method to snap-off the neck of sealed ampoule. The idea of novel opener tool is prepare the grinding slice inside rubber ring, so users could put the ampoule inside the rubber ring and then rotated the rubber ring to snap-off the neck of ampoule. The purpose of present study was evaluated the methods of snap-off and sizes of ampoule on forearm muscle activities, wrist postures and performance. The pronator teres muscle were heavier load as increased the sizes of ampoule. For performance analysis, Duncan's multiple range tests indicated that time of snap-off were longer in 10 ml and 20 ml of ampoule. The EMG of pronator teres muscle was significantly affected by methods of snap-off. Duncan's multiple range tests indicated that lower load was experienced on forearm muscles while using grinding slice with glove. For wrist posture, the ranges of motion for wrist were significant lower while using the novel tool. Present study provided the novel tool effectively to snap-off the ampoule to decrease forearm workload and sharp injuries.     

Ergonomic evaluation of processes and products in the manufacture of upholstery

This study aimed to perform an ergonomic evaluation of industrial processes and products - upholstered sofas - produced in the furniture cluster of Ubá-MG. The used material was collected from two sofas upholstered industries associated with the union of the furniture industries of Ubá region, located in Minas Gerais estate, Brazil. As for the product were evaluated dimensionally 29 upholstered sofas, with 12 being produced by industry "A" and 17 being produced by industry "B". As for the process, were evaluated: the socioeconomic profile of the worker and environmental factors of lighting and noise. The main results of this study showed that the upholstered sofas produced by industries, in general, fulfilled to the recommendations set out in the work in relation to the backrest height and useful seat depth. All the sofas, however, proved to be inadequate in relation to the seat height to the floor and the dimensions of the armrests Regarding environmental aspects, it was observed that in both industries, the activities in most jobs are performed under adverse conditions to the health and safety of workers and nonconformity with the limits set by Brazilian regulatory standard used in this work.     

Ergonomic evaluation of conventional and improved methods of aonla pricking with women workers

Conventional and improved methods of aonla pricking were evaluated ergonomically on an experiment conducted for 20 minute with women workers. The working heart rate, energy expenditure rate, total cardiac cost of work and physiological cost of work with conventional tools varied from 93-102 beats.min-1, 6-7.5 kJ.min-1, 285-470 beats, 14 -23 beats.min-1 while with machine varied from 96-105 beats.min-1, 6.5-8 kJ.min-1 , 336-540 beats, 16-27 beats.min-1 respectively. OWAS score for conventional method was 2 indicating corrective measures in near future while with machine was 1 indicating no corrective measures. Result of Nordic Musculoskeletal Questionnaire revealed that subjects complaint of pain in back, neck, right shoulder and right hand due to unnatural body posture and repetitive movement with hand tool. Moreover pricking was carried out in improper lighting conditions (200-300 lux) resulting into finger injuries from sharp edges of hand tool, whereas with machine no such problems were observed. Output with machine increased thrice than hand pricking in a given time. Machine was found useful in terms of saving time, increased productivity, enhanced safety and comfort as involved improved posture, was easy to handle and operate, thus increasing efficiency of the worker leading to better quality of life.     

Ergonomic work analysis as a tool of prevention for the occupational safety and health management system

This paper introduces the Ergonomic Work Analysis as a relevant instrument to identify the risks in occupational environments through the investigation of factors that influence the relationship between the worker and the productive process. It draws a parallel between the several aspects of risk identification in traditional tools of Health and Safety Management and the factors embraced by the Ergonomic Work Analysis, showing that the ergonomic methodology is able to go deeper in the scenarios of possible incident causes. This deepening enables the establishment of a relationship between the work context and the upcoming damage to the physical integrity of the worker. It acts as a complementary instrument in the traditional approach to the risk management. In order to explain the application of this methodology in a preventive way, it is presented a case study of a coal mill inspector in a siderurgic company.     

Ergonomic study of an operator's work of a molybdenum plant

This study was part of an ergonomic program which is being carried out through an agreement between the University of Concepción and a Chilean private mining company. The purpose of this case study was to identify working conditions in which the physical and mental workload could be over the capabilities of the operator. He was responsible for loading trucks with sacks of molybdenum and for downloading reagents and handles them. The methods employed in this study included electronic records, interviews, surveys, review of the company standards, a time study and physical and mental workload analysis. Results showed that 84% of the time the operator was carrying out principal and secondary activities and no break periods were detected. It was found that the pace of work and the shift system generated unfavorable conditions by imbalance in the workload on the different days of the week. In the light of the results recommendations were made for a number of ergonomic changes. Most of them were accepted by the company. The most important achievement was a change in the shift system. The overload of the operator was due to the fact that he was in a shift working 5 days and resting on weekends. The imbalance was mainly because the work of the week end was accumulated for Monday. As a result of the study, the company contracted a second worker for this job and adopted a 7x7 shift system, meaning that they work seven days and rest seven days. An evaluation carried out two month after adopting the new shift revealed that changes were well accepted by the worker.     

Ergonomic factors and production target evaluation in eucalyptus timber harvesting operations in mountainous terrains

There are several forest operations involved in Eucalyptus timber harvesting. This study was carried out during brush-cutting; tree felling, bucking, delimbing, piling and manual extraction operations, with the following objectives: a) analyzing, ergonomically, two systems of brush-cutting: one manual and the other semi-mechanized, using two different machines; b) ergonomically evaluating three different brands of pruner machines used in delimbing felled trees. c) determining the feasible target of productivity as a function of ergonomic factors relevant to establish the time of resting pauses for workers in manual and semi-mechanized timber harvesting systems in mountainous terrain. Brush-cutting, either manual or semimechanized, is an activity carried out prior to timber harvesting. It is usually a hard work, with low productivity when compared with mechanized systems. Pruner machines have been used by forest companies, due to the great possibilities to improve productivity, quality and the health of workers. Ergonomics is a discipline that promotes the adequacy of work to the physical and mental characteristics of human beings, seeking to design production systems and products considering relevant aspects, including social, organizational and environmental factors. Companies should consider the ergonomic factor in the determination of daily worker production targets.     

Ergonomic and usability analysis on a sample of automobile dashboards

This is a research study based on an analysis which sets out to identify and pinpoint ergonomic and usability problems found in a sample of automobile dashboards. The sample consisted of three dashboards, of three different makes and characterized as being a popular model, an average model and a luxury model. The examination was conducted by observation, with the aid of photography, notes and open interview, questionnaires and performing tasks with users, the bases of which are on the principles laid down by methodologies. From this it was possible to point to the existence of problems such as: complaints about the layout, lighting, colors, available area, difficult access to points of interaction, such as buttons, and the difficult nomenclature of dials. Later, the findings and recommendations presented show the need for a further, deeper study, using more accurate tools, a larger sample of users, and an anthropometric study focused on the dashboard, since reading and understanding it have to be done quickly and accurately, and that more attention be given to the study of automobile dashboards, particularly in the most popular vehicles in order to maintain the standards of usability, and drivers' comfort and safety.     

Ergonomic assessment among radiology technologists: a survey in a hospital

This article is the result of an Ergonomic Diagnosis in a study for a Specialization Course in Ergonomics. The research is being done in a public hospital in the city of Rio de Janeiro, where the target system is the radiology sector. For diagnosis purposes, subjective techniques were used, such as an open-ended survey, Corlett questionnaire and techniques for evaluating ergonomic risk such as Owas and Rula. Systematic observation was emphasized using photos and films. Preliminary observations made to the radiographers found that these professionals suffer risks of physical and verbal harassment, as well as sexual harassment. Most of them feel discriminated against in terms of race and accumulate activities demanding a lot of attention, as the medical diagnosis and subsequent procedures will depend on the outcome of this task. They accumulate tension due to the weight of responsibility, since there are cases where the patient has risk of death.     

Ergonomic analysis in cold storage rooms: a study of case

The human work possess a history and, in this dimension, the man is submitted to the conditions that confer it physical and psychological consequences. The activity of work in the present time imposes adverse labor conditions. The ergonomics is a science that it aims at to study the real activity of the work with sights its transformation. This study it was carried through in a sector of processing of meats in a Agroindustry, with the objective to analyze ergonomically the conditions of work and the possible risks it greets it of the workers. It was verified that in the accomplishment of the activities it had an overload of the musculature of superior members, where if it verified the requirement of repetitive movements during four working hours. Also observed the organization of the work, the position of the employees and way to carry through the activities. With the study we conclude that the ergonomic risks in the sector are related to the position during the accomplishment of the activities, requirement of repetitive movements, e the cold that affects the muscular control, reducing some motor abilities as the dexterity and the force.     

Ergonomic evaluation of the preparation of cuttings and minicuttings for eucalyptus seedling production, with the use of scissors

This study was conducted in a nursery for eucalyptus seedling production in a forest Company, located in the southern state of Bahia, Brazil. It aimed to evaluate the ergonomic conditions of the preparation of cuttings and mini-cuttings with scissors for Eucalyptus seedling production to increase well-being, satisfaction and safety and minimizing the occurrence of occupational diseases, also improving the process efficiency and final product quality. Environmental conditions, levels of noise, postures, RSI risk and physical workload were assessed. The environmental conditions complied with the recommended norms, except at certain times of day, when workers should make compensation breaks. The workers that collect minicuttings presented postures classified as normal by OWAS. On the other hand, the posture of workers dealing with cutting preparation requires corrections in a short run. The workers were subjected to moderate RSI risk due to the high degree of repeatability found. The physical workload was classified as mild, with no need for ergonomic interventions.