A Multivariate Adaptive Exponentially Weighted Moving Average Control Chart

A multivariate extension of the adaptive exponentially weighted moving average (AEWMA) control chart is proposed. The new multivariate scheme can detect small and large shifts in the process mean vector effectively. The proposed scheme can be viewed as a smooth combination of a multivariate exponentially weighted moving average (MEWMA) chart and a Shewhart χ²-chart. The optimal design of the proposed chart is given according to a pre-specified in-control average run length and two shift sizes; a small and large shift each measured in terms of the non centrality parameter. The signal resistance of the newly proposed multivariate chart is also given. Comparisons among the new chart, the MEWMA chart, and the combined Shewhart-MEWMA (S-MEWMA) chart in terms of the standard and worst-case average run length profiles are presented. In addition, the three charts are compared with respect to their worst-case signal resistance values. The proposed chart gives somewhat better worst-case ARL and signal resistance values than the competing charts. It also gives better standard ARL performance especially for moderate and large shifts. The effectiveness of our proposed chart is illustrated through an example with simulated data set.     

An Evaluation of the Double Exponentially Weighted Moving Average Control Chart

In this article we perform a careful investigation of the double exponentially weighted moving average (DEWMA) chart performance for monitoring the process mean. We compare the performance of this chart to the usual EWMA control chart based on zero-state and worst-case average run length (ARL) measures. We also evaluate the signal resistance measure of the DEWMA chart and compare its maximum value to that of the EWMA chart. We show that the superiority of the DEWMA chart over the simpler standard EWMA chart based on zero-state ARL performance disappears when the smoothing constant of the EWMA chart is chosen to give weights to past observations closer to those given by the DEWMA chart. Moreover, our results show that the standard EWMA chart has much better performance than the DEWMA chart in terms of worst-case ARL values, especially when small smoothing constants are used. We also demonstrate using an illustrative example that the DEWMA chart can build up an exceedingly large amount of inertia when used to monitor the process mean.     

The Design of the Multivariate Synthetic Exponentially Weighted Moving Average Control Chart

A multivariate synthetic exponentially weighted moving average (MSEWMA) control chart is presented in this study. The MSEWMA control chart consists of a multivariate exponentially weighted moving average (MEWMA) control chart and a conforming run length control chart. The average run length of the MSEWMA control chart is obtained using a Markov chain approach. From the numerical comparisons, it is shown that the MSEWMA control chart is more efficient than the multivariate synthetic T ² control chart and the MEWMA control chart for detecting shifts in the process mean vector.     

Multivariate Exponentially Weighted Moving Average Charts for a Mean Based on Its Prediction Distribution

This article develops a control chart for a mean vector when it is monitored by a quadratic form in the exponentially weighted observation vector. A Bayesian approach is used to incorporate parameter uncertainty. We first use a Bayesian predictive distribution to construct the control chart, and we then use a sampling theory approach to evaluate it under various hypothetical specifications for the data generation model.     

Combined Exponentially Weighted Moving Average Charts for the Mean and Variance Based on the Predictive Distribution

This article develops combined exponentially weighted moving average (EWMA) charts for the mean and variance of a normal distribution. A Bayesian approach is used to incorporate parameter uncertainty. We first use a Bayesian predictive distribution to construct the control chart, and we then use a sampling theory approach to evaluate it under various hypothetical specifications for the data generation model. Simulations are used to compare the proposed charts for different values of both the weighing constant for the exponentially weighted moving averages and for the size of the calibration sample that is used to estimate the in-statistical-control process parameters. We also examine the separate performance of the EWMA chart for the variance.     

A Double Multivariate Exponentially Weighted Moving Average (dMEWMA) Control Chart for a Process Location Monitoring

A new control scheme, dMEWMA, for detecting shifts in the mean vector of multivariately normally distributed quality characteristics is presented. It is shown that the ARL performance of dMEWMA depends on the mean and variance-covariance matricies only through the non-centrality parameter value. Through Monte Carlo simulations, the performance of dMEWMA for detecting various shifts is compared to the competing control schemes, MEWMA and Hotelling's χ². It is concluded that dMEWMA outperforms MEWMA and Hotelling's χ² control schemes for small and larger shifts. In comparison to MEWMA control schemes, dMEWMA schemes are optimal for larger values of the smoothing parameter λ and perform much better for very small shifts in the process mean. Finally, an example to illustrate the construction of the dMEWMA control scheme is introduced.     

The Generally Weighted Moving Average Variance Chart

This article extends the generally weighted moving average (GWMA) technique for detecting changes in process variance. The proposed chart is called the generally weighted moving average variance (GWMAV) chart. Simulation is employed to evaluate the average run length (ARL) characteristics of the GWMAV and EWMA control charts. An extensive comparison of these control charts reveals that the GWMAV chart is more sensitive than the EWMA control charts for detecting small shifts in the variance of a process when the shifts are below 1.35 standard deviations. Additionally, the GWMAV control chart performs little better when the variance shifts are between 1.35 and 1.5 standard deviation, and the 2 charts performs similar when the variance shifts are above 1.5 standard deviation. The design of the GWMAV chart is also discussed.     

A Sum of Squares Generally Weighted Moving Average Control Chart

In this article, we propose a new control chart called the sum of squares generally weighted moving average (SS-GWMA) control chart to simultaneously detect both the increase and decrease in the mean and/or variability. This new scheme is compared with the sum of squares exponentially weighted moving average (SS-EWMA) control chart. A simulation study is conducted to show that SS-GWMA control charts outperform SS-EWMA charts, in terms of the average run length (ARL), standard deviation of run length (SDRL), and diagnostic abilities. The design of SS-GWMA control charts is also discussed.     

Maximum Chi-Square Generally Weighted Moving Average Control Chart for Monitoring Process Mean and Variability

In this article, we propose a new control chart called the maximum chi-square generally weighted moving average (MCSGWMA) control chart. This control chart can effectively combine two generally weighted moving average (GWMA) control charts into a single one and can detect both increases as well as decreases in the process mean and/or variability simultaneously. The average run length (ARL) characteristics of the MCSGWMA and maximum exponentially weighted moving average (MaxEWMA) charts are evaluated by performing computer simulations. The comparison of the ARLs shows that the MCSGWMA control chart performs better than the MaxEWMA control chart.     

Bayesian Identification of Moving Average Models

This study approaches the Bayesian identification of moving average processes using an approximate likelihood function and a normal gamma prior density. The marginal posterior probability mass function of the model order is developed in a convenient form. Then one may investigate the posterior probabilities over the grid of the order and choose the order with the highest probability to solve the identification problem. A comprehensive simulation study is carried out to demonstrate the performance of the proposed procedure and check its adequacy in handling the identification problem. In addition, the proposed Bayesian procedure is compared with some non Bayesian automatic techniques and another Bayesian technique. The numerical results support the adequacy of using the proposed procedure in solving the identification problem of moving average processes.     

A Double Moving Average Control Chart

The double exponentially weighted moving average (DEWMA) technique has been investigated in recent years for detecting shifts in the process mean and has been shown to be more efficient than the corresponding exponentially weighted moving average (EWMA) technique. In this article, we extend the DEWMA technique of performing exponential smoothing twice to the double moving average (DMA) technique by computing the moving average twice. Using simulation, we show that our proposed DMA chart improves upon the ARL performance of the moving average (MA) chart in detecting mean shifts of small to moderate magnitudes. It is also shown through simulation that, generally, the DMA charts with spans, w = 10 and 15 provide comparable average run length (ARL) performances to the EWMA and cumulative sum (CUSUM) charts, designed for detecting small shifts.     

Quasi-likelihood Estimation of Non-invertible Moving Average Processes

Classical methods based on Gaussian likelihood or least-squares cannot identify non-invertible moving average processes, while recent non-Gaussian results are based on full likelihood consideration. Since the error distribution is rarely known a quasi-likelihood approach is desirable, but its consistency properties are yet unknown. In this paper we study the quasi-likelihood associated with the Laplacian model, a convenient non-Gaussian model that yields a modified L ₁ procedure. We show that consistency holds for all standard heavy tailed errors, but not for light tailed errors, showing that a quasi-likelihood procedure cannot be applied blindly to estimate non-invertible models. This is an interesting contrast to the standard results of the quasi-likelihood in regression models, where consistency usually holds much more generally. Similar results hold for estimation of non-causal non-invertible ARMA processes. Various simulation studies are presented to validate the theory and to show the effect of the error distribution, and an analysis of the US unemployment series is given as an illustration.     

Autoregressive Moving Average Infinite Hidden Markov-Switching Models

Markov-switching models are usually specified under the assumption that all the parameters change when a regime switch occurs. Relaxing this hypothesis and being able to detect which parameters evolve over time is relevant for interpreting the changes in the dynamics of the series, for specifying models parsimoniously, and may be helpful in forecasting. We propose the class of sticky infinite hidden Markov-switching autoregressive moving average models, in which we disentangle the break dynamics of the mean and the variance parameters. In this class, the number of regimes is possibly infinite and is determined when estimating the model, thus avoiding the need to set this number by a model choice criterion. We develop a new Markov chain Monte Carlo estimation method that solves the path dependence issue due to the moving average component. Empirical results on macroeconomic series illustrate that the proposed class of models dominates the model with fixed parameters in terms of point and density forecasts.     

Evaluations of FWER-controlling methods in multiple hypothesis testing

Simultaneously testing a family of n null hypotheses can arise in many applications. A common problem in multiple hypothesis testing is to control Type-I error. The probability of at least one false rejection referred to as the familywise error rate (FWER) is one of the earliest error rate measures. Many FWER-controlling procedures have been proposed. The ability to control the FWER and achieve higher power is often used to evaluate the performance of a controlling procedure. However, when testing multiple hypotheses, FWER and power are not sufficient for evaluating controlling procedure’s performance. Furthermore, the performance of a controlling procedure is also governed by experimental parameters such as the number of hypotheses, sample size, the number of true null hypotheses and data structure. This paper evaluates, under various experimental settings, the performance of some FWER-controlling procedures in terms of five indices, the FWER, the false discovery rate, the false non-discovery rate, the sensitivity and the specificity. The results can provide guidance on how to select an appropriate FWER-controlling procedure to meet a study’s objective.     

Local Weighted Average Estimation of the Regression Operator for Functional Data

We are concerned with the problem of local weighted average estimation of the regression operator when the responses are real-valued random variables, the explanatory data are of functional fixed-design type, and the errors consist of an independent and identically distributed variables. In this article, our main contributions on the local linear functional estimation concern from one part, the situation when the data are of functional fixed-design kind, and from the other part, in deriving uniform asymptotic results on the behavior of this estimator with respect to the topological properties of the space data (normed or semi-metric).     

怎样分析中长期均线

你不理财 财不理你 你若理财 统计帮您     

Estimating Moving Average Parameters: Classical Pileups and Bayesian Posteriors

We analyze posterior distributions of the moving average parameter in the first-order case and sampling distributions of the corresponding maximum likelihood estimator. Sampling distributions “pile up” at unity when the true parameter is near unity; hence if one were to difference such a process, estimates of the moving average component of the resulting series would spuriously tend to indicate that the process was overdifferenced. Flat-prior posterior distributions do not pile up, however, regardless of the parameter's proximity to unity; hence caution should be taken in dismissing evidence that a series has been overdifferenced.     

Bayesian Inferences and Forecasts With Multiple Autoregressive Moving Average Models

The main objective of this paper is to develop convenient Bayesian techniques for estimation and forecasting which can be used to analyze multiple (multivariate) autoregressive moving average processes. Based on the conditional likelihood function and the least squares estimates of the residuals, the marginal posterior distribution of the coefficients of the model is approximated by a matrix t distribution, the marginal posterior distribution of the precision matrix is approximated by a Wishart distribution, and the predictive distribution is approximated by a multivariate t distribution. Some numerical examples are given to demonstrate the idea of using the proposed techniques to analyze different types of multiple ARMA models.     

Forward Moving Average Representation in Multivariate MA(1) Processes

Forward-moving average coefficients are in general different from their corresponding backward-moving average coefficients in multivariate stationary time series. There is lack of practical methods to derive forward-moving average coefficients from the backward ones. In this article, we establish a new practical approach for obtaining the forward-moving average coefficients for multivariate moving average processes of order one.