A temporal correlation function for the association between patient‐reported outcome and clinical endpoints

For clinical trials with multiple endpoints, the primary interest is usually to evaluate the relationship of these endpoints and treatment interventions. Studying the correlation of two clinical trial endpoints can also be of interests. For example, the association between patient‐reported outcome and clinically assessed endpoint could answer important research questions and also generate interesting hypothesis for future research. However, it is not straightforward to quantify such association. In this article, we proposed a multiple event approach to profile such association with a temporal correlation function, visualized by a correlation function plot over time with a confidence band. We developed this approach by extending the existing methodology in recurrent event literature. This approach was shown to be generally unbiased and could be a useful tool for data visualization and inference. We demonstrated the use of this method with data from a real clinical trial. Although this approach was developed to evaluate the association between patient‐reported outcome and adverse events, it can also be used to evaluate the association of any two endpoints that can be translated to time‐to‐event endpoints. Copyright © 2015 John Wiley & Sons, Ltd.     

Control‐based imputation for sensitivity analyses in informative censoring for recurrent event data

In clinical trials, missing data commonly arise through nonadherence to the randomized treatment or to study procedure. For trials in which recurrent event endpoints are of interests, conventional analyses using the proportional intensity model or the count model assume that the data are missing at random, which cannot be tested using the observed data alone. Thus, sensitivity analyses are recommended. We implement the control‐based multiple imputation as sensitivity analyses for the recurrent event data. We model the recurrent event using a piecewise exponential proportional intensity model with frailty and sample the parameters from the posterior distribution. We impute the number of events after dropped out and correct the variance estimation using a bootstrap procedure. We apply the method to an application of sitagliptin study.     

Analysis of Panel Count Data with Dependent Observation Times

In this article, a semiparametric approach is proposed for the regression analysis of panel count data. Panel count data commonly arise in clinical trials and demographical studies where the response variable is the number of multiple recurrences of the event of interest and observation times are not fixed, varying from subject to subject. It is assumed that two processes exist in this data: the first is for a recurrent event and the second is for observation time. Many studies have been done to estimate mean function and regression parameters under the independency between recurrent event process and observation time process. In this article, the same statistical inference is studied, but the situation where these two processes may be related is also considered. The mixed Poisson process is applied for the recurrent event processes, and a frailty intensity function for the observation time is also used, respectively. Simulation studies are conducted to study the performance of the suggested methods. The bladder tumor data are applied to compare previous studie' results.     

Sample size calculation for recurrent events data in one‐arm studies

In some exceptional circumstances, as in very rare diseases, nonrandomized one‐arm trials are the sole source of evidence to demonstrate efficacy and safety of a new treatment. The design of such studies needs a sound methodological approach in order to provide reliable information, and the determination of the appropriate sample size still represents a critical step of this planning process. As, to our knowledge, no method exists for sample size calculation in one‐arm trials with a recurrent event endpoint, we propose here a closed sample size formula. It is derived assuming a mixed Poisson process, and it is based on the asymptotic distribution of the one‐sample robust nonparametric test recently developed for the analysis of recurrent events data. The validity of this formula in managing a situation with heterogeneity of event rates, both in time and between patients, and time‐varying treatment effect was demonstrated with exhaustive simulation studies. Moreover, although the method requires the specification of a process for events generation, it seems to be robust under erroneous definition of this process, provided that the number of events at the end of the study is similar to the one assumed in the planning phase. The motivating clinical context is represented by a nonrandomized one‐arm study on gene therapy in a very rare immunodeficiency in children (ADA‐SCID), where a major endpoint is the recurrence of severe infections. Copyright © 2012 John Wiley & Sons, Ltd.     

Subgroup Analysis with Time‐to‐Event Data Under a Logistic‐Cox Mixture Model

Subgroup detection has received increasing attention recently in different fields such as clinical trials, public management and market segmentation analysis. In these fields, people often face time‐to‐event data, which are commonly subject to right censoring. This paper proposes a semiparametric Logistic‐Cox mixture model for subgroup analysis when the interested outcome is event time with right censoring. The proposed method mainly consists of a likelihood ratio‐based testing procedure for testing the existence of subgroups. The expectation–maximization iteration is applied to improve the testing power, and a model‐based bootstrap approach is developed to implement the testing procedure. When there exist subgroups, one can also use the proposed model to estimate the subgroup effect and construct predictive scores for the subgroup membership. The large sample properties of the proposed method are studied. The finite sample performance of the proposed method is assessed by simulation studies. A real data example is also provided for illustration.     

Treatment policy estimands for recurrent event data using data collected after cessation of randomised treatment

In the past, many clinical trials have withdrawn subjects from the study when they prematurely stopped their randomised treatment and have therefore only collected ‘on‐treatment’ data. Thus, analyses addressing a treatment policy estimand have been restricted to imputing missing data under assumptions drawn from these data only. Many confirmatory trials are now continuing to collect data from subjects in a study even after they have prematurely discontinued study treatment as this event is irrelevant for the purposes of a treatment policy estimand. However, despite efforts to keep subjects in a trial, some will still choose to withdraw. Recent publications for sensitivity analyses of recurrent event data have focused on the reference‐based imputation methods commonly applied to continuous outcomes, where imputation for the missing data for one treatment arm is based on the observed outcomes in another arm. However, the existence of data from subjects who have prematurely discontinued treatment but remained in the study has now raised the opportunity to use this ‘off‐treatment’ data to impute the missing data for subjects who withdraw, potentially allowing more plausible assumptions for the missing post‐study‐withdrawal data than reference‐based approaches. In this paper, we introduce a new imputation method for recurrent event data in which the missing post‐study‐withdrawal event rate for a particular subject is assumed to reflect that observed from subjects during the off‐treatment period. The method is illustrated in a trial in chronic obstructive pulmonary disease (COPD) where the primary endpoint was the rate of exacerbations, analysed using a negative binomial model.     

Dealing with selective dropout in clinical trials

Clinical trials in severely diseased populations often suffer from a high dropout rate that is related to the investigated target morbidity. These dropouts can bias estimates and treatment comparisons, particularly in the event of an imbalance. Methods to describe such selective dropout are presented that use the time in study distribution to generate so‐called population evolution charts. These charts show the development of a distribution of a covariate or the target morbidity measure as it changes as a result of the dropout process during the follow‐up time. The selectiveness of the dropout process with respect to a variable can be inferred from the change in its distribution. Different types of selective dropout are described with real data from several studies in metastatic bone disease, where marked effects can be seen. A general strategy to cope with selective dropout seems to be the inclusion of dropout events into the endpoint. Within a time‐to‐event analysis framework this simple approach can lead to valid conclusions and still retains conservative elements. Morbidity measures that are based on (recurrent) event counts react differently in the presence of selective dropout. They differ mainly in the way dropout is included. One simple measure achieves good performance under selective dropout by introducing a non‐specific penalty for premature study termination. The use of a prespecified scoring system to assign a weight for each works well. This simple and transparent approach performs well even in the presence of unbalanced selective dropout. Copyright © 2002 John Wiley & Sons, Ltd.     

Blinded continuous monitoring in clinical trials with recurrent event endpoints

In studies with recurrent event endpoints, misspecified assumptions of event rates or dispersion can lead to underpowered trials or overexposure of patients. Specification of overdispersion is often a particular problem as it is usually not reported in clinical trial publications. Changing event rates over the years have been described for some diseases, adding to the uncertainty in planning. To mitigate the risks of inadequate sample sizes, internal pilot study designs have been proposed with a preference for blinded sample size reestimation procedures, as they generally do not affect the type I error rate and maintain trial integrity. Blinded sample size reestimation procedures are available for trials with recurrent events as endpoints. However, the variance in the reestimated sample size can be considerable in particular with early sample size reviews. Motivated by a randomized controlled trial in paediatric multiple sclerosis, a rare neurological condition in children, we apply the concept of blinded continuous monitoring of information, which is known to reduce the variance in the resulting sample size. Assuming negative binomial distributions for the counts of recurrent relapses, we derive information criteria and propose blinded continuous monitoring procedures. The operating characteristics of these are assessed in Monte Carlo trial simulations demonstrating favourable properties with regard to type I error rate, power, and stopping time, ie, sample size.     

An investigation into the two‐stage meta‐analytic copula modelling approach for evaluating time‐to‐event surrogate endpoints which comprise of one or more events of interest

Clinical trials of experimental treatments must be designed with primary endpoints that directly measure clinical benefit for patients. In many disease areas, the recognised gold standard primary endpoint can take many years to mature, leading to challenges in the conduct and quality of clinical studies. There is increasing interest in using shorter‐term surrogate endpoints as substitutes for costly long‐term clinical trial endpoints; such surrogates need to be selected according to biological plausibility, as well as the ability to reliably predict the unobserved treatment effect on the long‐term endpoint. A number of statistical methods to evaluate this prediction have been proposed; this paper uses a simulation study to explore one such method in the context of time‐to‐event surrogates for a time‐to‐event true endpoint. This two‐stage meta‐analytic copula method has been extensively studied for time‐to‐event surrogate endpoints with one event of interest, but thus far has not been explored for the assessment of surrogates which have multiple events of interest, such as those incorporating information directly from the true clinical endpoint. We assess the sensitivity of the method to various factors including strength of association between endpoints, the quantity of data available, and the effect of censoring. In particular, we consider scenarios where there exist very little data on which to assess surrogacy. Results show that the two‐stage meta‐analytic copula method performs well under certain circumstances and could be considered useful in practice, but demonstrates limitations that may prevent universal use.     

Nonparametric covariate adjustment in estimating hazard ratios

In randomized clinical trials with time‐to‐event outcomes, the hazard ratio is commonly used to quantify the treatment effect relative to a control. The Cox regression model is commonly used to adjust for relevant covariates to obtain more accurate estimates of the hazard ratio between treatment groups. However, it is well known that the treatment hazard ratio based on a covariate‐adjusted Cox regression model is conditional on the specific covariates and differs from the unconditional hazard ratio that is an average across the population. Therefore, covariate‐adjusted Cox models cannot be used when the unconditional inference is desired. In addition, the covariate‐adjusted Cox model requires the relatively strong assumption of proportional hazards for each covariate. To overcome these challenges, a nonparametric randomization‐based analysis of covariance method was proposed to estimate the covariate‐adjusted hazard ratios for multivariate time‐to‐event outcomes. However, empirical evaluations of the performance (power and type I error rate) of the method have not been studied. Although the method is derived for multivariate situations, for most registration trials, the primary endpoint is a univariate outcome. Therefore, this approach is applied to univariate outcomes, and performance is evaluated through a simulation study in this paper. Stratified analysis is also investigated. As an illustration of the method, we also apply the covariate‐adjusted and unadjusted analyses to an oncology trial. Copyright © 2015 John Wiley & Sons, Ltd.     

Sensitivity analyses for partially observed recurrent event data

Recurrent events involve the occurrences of the same type of event repeatedly over time and are commonly encountered in longitudinal studies. Examples include seizures in epileptic studies or occurrence of cancer tumors. In such studies, interest lies in the number of events that occur over a fixed period of time. One considerable challenge in analyzing such data arises when a large proportion of patients discontinues before the end of the study, for example, because of adverse events, leading to partially observed data. In this situation, data are often modeled using a negative binomial distribution with time‐in‐study as offset. Such an analysis assumes that data are missing at random (MAR). As we cannot test the adequacy of MAR, sensitivity analyses that assess the robustness of conclusions across a range of different assumptions need to be performed. Sophisticated sensitivity analyses for continuous data are being frequently performed. However, this is less the case for recurrent event or count data. We will present a flexible approach to perform clinically interpretable sensitivity analyses for recurrent event data. Our approach fits into the framework of reference‐based imputations, where information from reference arms can be borrowed to impute post‐discontinuation data. Different assumptions about the future behavior of dropouts dependent on reasons for dropout and received treatment can be made. The imputation model is based on a flexible model that allows for time‐varying baseline intensities. We assess the performance in a simulation study and provide an illustration with a clinical trial in patients who suffer from bladder cancer. Copyright © 2015 John Wiley & Sons, Ltd.     

The analysis of multivariate recurrent events with partially missing event types

In many clinical studies, subjects are at risk of experiencing more than one type of potentially recurrent event. In some situations, however, the occurrence of an event is observed, but the specific type is not determined. We consider the analysis of this type of incomplete data when the objectives are to summarize features of conditional intensity functions and associated treatment effects, and to study the association between different types of event. Here we describe a likelihood approach based on joint models for the multi-type recurrent events where parameter estimation is obtained from a Monte-Carlo EM algorithm. Simulation studies show that the proposed method gives unbiased estimators for regression coefficients and variance–covariance parameters, and the coverage probabilities of confidence intervals for regression coefficients are close to the nominal level. When the distribution of the frailty variable is misspecified, the method still provides estimators of the regression coefficients with good properties. The proposed method is applied to a motivating data set from an asthma study in which exacerbations were to be sub-typed by cellular analysis of sputum samples as eosinophilic or non-eosinophilic.     

Prediction of accrual closure date in multi-center clinical trials with discrete-time Poisson process models

In a phase III multi‐center cancer clinical trial or a large public health study, sample size is predetermined to achieve desired power, and study participants are enrolled from tens or hundreds of participating institutions. As the accrual is closing to the target size, the coordinating data center needs to project the accrual closure date on the basis of the observed accrual pattern and notify the participating sites several weeks in advance. In the past, projections were simply based on some crude assessment, and conservative measures were incorporated in order to achieve the target accrual size. This approach often resulted in excessive accrual size and subsequently unnecessary financial burden on the study sponsors. Here we proposed a discrete‐time Poisson process‐based method to estimate the accrual rate at time of projection and subsequently the trial closure date. To ensure that target size would be reached with high confidence, we also proposed a conservative method for the closure date projection. The proposed method was illustrated through the analysis of the accrual data of the National Surgical Adjuvant Breast and Bowel Project trial B‐38. The results showed that application of the proposed method could help to save considerable amount of expenditure in patient management without compromising the accrual goal in multi‐center clinical trials. Copyright © 2012 John Wiley & Sons, Ltd.     

Sensitivity to censored‐at‐random assumption in the analysis of time‐to‐event endpoints

Over the past years, significant progress has been made in developing statistically rigorous methods to implement clinically interpretable sensitivity analyses for assumptions about the missingness mechanism in clinical trials for continuous and (to a lesser extent) for binary or categorical endpoints. Studies with time‐to‐event outcomes have received much less attention. However, such studies can be similarly challenged with respect to the robustness and integrity of primary analysis conclusions when a substantial number of subjects withdraw from treatment prematurely prior to experiencing an event of interest. We discuss how the methods that are widely used for primary analyses of time‐to‐event outcomes could be extended in a clinically meaningful and interpretable way to stress‐test the assumption of ignorable censoring. We focus on a ‘tipping point’ approach, the objective of which is to postulate sensitivity parameters with a clear clinical interpretation and to identify a setting of these parameters unfavorable enough towards the experimental treatment to nullify a conclusion that was favorable to that treatment. Robustness of primary analysis results can then be assessed based on clinical plausibility of the scenario represented by the tipping point. We study several approaches for conducting such analyses based on multiple imputation using parametric, semi‐parametric, and non‐parametric imputation models and evaluate their operating characteristics via simulation. We argue that these methods are valuable tools for sensitivity analyses of time‐to‐event data and conclude that the method based on piecewise exponential imputation model of survival has some advantages over other methods studied here. Copyright © 2016 John Wiley & Sons, Ltd.     

Joint covariate-adjusted score test statistics for recurrent events and a terminal event

Recurrent events data are frequently encountered and could be stopped by a terminal event in clinical trials. It is of interest to assess the treatment efficacy simultaneously with respect to both the recurrent events and the terminal event in many applications. In this paper we propose joint covariate-adjusted score test statistics based on joint models of recurrent events and a terminal event. No assumptions on the functional form of the covariates are needed. Simulation results show that the proposed tests can improve the efficiency over tests based on covariate unadjusted model. The proposed tests are applied to the SOLVD data for illustration.     

Study design of single‐arm phase II immunotherapy trials with long‐term survivors and random delayed treatment effect

In the traditional study design of a single‐arm phase II cancer clinical trial, the one‐sample log‐rank test has been frequently used. A common practice in sample size calculation is to assume that the event time in the new treatment follows exponential distribution. Such a study design may not be suitable for immunotherapy cancer trials, when both long‐term survivors (or even cured patients from the disease) and delayed treatment effect are present, because exponential distribution is not appropriate to describe such data and consequently could lead to severely underpowered trial. In this research, we proposed a piecewise proportional hazards cure rate model with random delayed treatment effect to design single‐arm phase II immunotherapy cancer trials. To improve test power, we proposed a new weighted one‐sample log‐rank test and provided a sample size calculation formula for designing trials. Our simulation study showed that the proposed log‐rank test performs well and is robust of misspecified weight and the sample size calculation formula also performs well.     

Adjusting overall survival for treatment switches: commonly used methods and practical application

In parallel group trials, long‐term efficacy endpoints may be affected if some patients switch or cross over to the alternative treatment arm prior to the event. In oncology trials, switch to the experimental treatment can occur in the control arm following disease progression and potentially impact overall survival. It may be a clinically relevant question to estimate the efficacy that would have been observed if no patients had switched, for example, to estimate ‘real‐life’ clinical effectiveness for a health technology assessment. Several commonly used statistical methods are available that try to adjust time‐to‐event data to account for treatment switching, ranging from naive exclusion and censoring approaches to more complex inverse probability of censoring weighting and rank‐preserving structural failure time models. These are described, along with their key assumptions, strengths, and limitations. Best practice guidance is provided for both trial design and analysis when switching is anticipated. Available statistical software is summarized, and examples are provided of the application of these methods in health technology assessments of oncology trials. Key considerations include having a clearly articulated rationale and research question and a well‐designed trial with sufficient good quality data collection to enable robust statistical analysis. No analysis method is universally suitable in all situations, and each makes strong untestable assumptions. There is a need for further research into new or improved techniques. This information should aid statisticians and their colleagues to improve the design and analysis of clinical trials where treatment switch is anticipated. Copyright © 2013 John Wiley & Sons, Ltd.     

Multivariate two‐sample permutation tests for trials with multiple time‐to‐event outcomes

Clinical trials involving multiple time‐to‐event outcomes are increasingly common. In this paper, permutation tests for testing for group differences in multivariate time‐to‐event data are proposed. Unlike other two‐sample tests for multivariate survival data, the proposed tests attain the nominal type I error rate. A simulation study shows that the proposed tests outperform their competitors when the degree of censored observations is sufficiently high. When the degree of censoring is low, it is seen that naive tests such as Hotelling's T² outperform tests tailored to survival data. Computational and practical aspects of the proposed tests are discussed, and their use is illustrated by analyses of three publicly available datasets. Implementations of the proposed tests are available in an accompanying R package.     

Hazard ratio inference in stratified clinical trials with time‐to‐event endpoints and limited sample size

The stratified Cox model is commonly used for stratified clinical trials with time‐to‐event endpoints. The estimated log hazard ratio is approximately a weighted average of corresponding stratum‐specific Cox model estimates using inverse‐variance weights; the latter are optimal only under the (often implausible) assumption of a constant hazard ratio across strata. Focusing on trials with limited sample sizes (50‐200 subjects per treatment), we propose an alternative approach in which stratum‐specific estimates are obtained using a refined generalized logrank (RGLR) approach and then combined using either sample size or minimum risk weights for overall inference. Our proposal extends the work of Mehrotra et al, to incorporate the RGLR statistic, which outperforms the Cox model in the setting of proportional hazards and small samples. This work also entails development of a remarkably accurate plug‐in formula for the variance of RGLR‐based estimated log hazard ratios. We demonstrate using simulations that our proposed two‐step RGLR analysis delivers notably better results through smaller estimation bias and mean squared error and larger power than the stratified Cox model analysis when there is a treatment‐by‐stratum interaction, with similar performance when there is no interaction. Additionally, our method controls the type I error rate while the stratified Cox model does not in small samples. We illustrate our method using data from a clinical trial comparing two treatments for colon cancer.