Guaranteed Local Maximum Likelihood Detection of a Change Point in Nonparametric Logistic Regression

We consider nonparametric logistic regression and propose a generalized likelihood test for detecting a threshold effect that indicates a relationship between some risk factor and a defined outcome above the threshold but none below it. One important field of application is occupational medicine and in particular, epidemiological studies. In epidemiological studies, segmented fully parametric logistic regression models are often threshold models, where it is assumed that the exposure has no influence on a response up to a possible unknown threshold, and has an effect beyond that threshold. Finding efficient methods for detection and estimation of a threshold is a very important task in these studies. This article proposes such methods in a context of nonparametric logistic regression. We use a local version of unknown likelihood functions and show that under rather common assumptions the asymptotic power of our test is one. We present a guaranteed non asymptotic upper bound for the significance level of the proposed test. If applying the test yields the acceptance of the conclusion that there was a change point (and hence a threshold limit value), we suggest using the local maximum likelihood estimator of the change point and consider the asymptotic properties of this estimator.     

A new semiparametric Weibull cure rate model: fitting different behaviors within GAMLSS

ABSTRACT

We propose a new semiparametric Weibull cure rate model for fitting nonlinear effects of explanatory variables on the mean, scale and cure rate parameters. The regression model is based on the generalized additive models for location, scale and shape, for which any or all distribution parameters can be modeled as parametric linear and/or nonparametric smooth functions of explanatory variables. We present methods to select additive terms, model estimation and validation, where all computational codes are presented in a simple way such that any R user can fit the new model. Biases of the parameter estimates caused by models specified erroneously are investigated through Monte Carlo simulations. We illustrate the usefulness of the new model by means of two applications to real data. We provide computational codes to fit the new regression model in the R software.     

Nonparametric Estimation of the Conditional Distribution at Regression Boundary Points

Abstract

Nonparametric regression is a standard statistical tool with increased importance in the Big Data era. Boundary points pose additional difficulties but local polynomial regression can be used to alleviate them. Local linear regression, for example, is easy to implement and performs quite well both at interior and boundary points. Estimating the conditional distribution function and/or the quantile function at a given regressor point is immediate via standard kernel methods but problems ensue if local linear methods are to be used. In particular, the distribution function estimator is not guaranteed to be monotone increasing, and the quantile curves can “cross.” In the article at hand, a simple method of correcting the local linear distribution estimator for monotonicity is proposed, and its good performance is demonstrated via simulations and real data examples. Supplementary materials for this article are available online.     

Empirical Comparison of Nonparametric Regression Estimates on Real Data

The performance of nine different nonparametric regression estimates is empirically compared on ten different real datasets. The number of data points in the real datasets varies between 7, 900 and 18, 000, where each real dataset contains between 5 and 20 variables. The nonparametric regression estimates include kernel, partitioning, nearest neighbor, additive spline, neural network, penalized smoothing splines, local linear kernel, regression trees, and random forests estimates. The main result is a table containing the empirical L₂ risks of all nine nonparametric regression estimates on the evaluation part of the different datasets. The neural networks and random forests are the two estimates performing best. The datasets are publicly available, so that any new regression estimate can be easily compared with all nine estimates considered in this article by just applying it to the publicly available data and by computing its empirical L₂ risks on the evaluation part of the datasets.     

Rational Regression Models with Continuous Chebyshev Design

In rational regression models, the G-optimal designs are very difficult to derive in general. Even when an G-optimal design can be found, it has, from the point of view of modern nonparametric regression, certain drawbacks because the optimal design crucially depends on the model. Hence, it can be used only when the model is given in advance. This leads to the problem of finding designs which would be nearly optimal for a broad class of rational regression models. In this article, we will show that the so-called continuous Chebyshev Design is a practical solution to this problem.     

Monotone Nonparametric Regression and Confidence Intervals

Several variations of monotone nonparametric regression have been developed over the past 30 years. One approach is to first apply nonparametric regression to data and then monotone smooth the initial estimates to “iron out” violations to the assumed order. Here, such estimators are considered, where local polynomial regression is first used, followed by either least squares isotonic regression or a monotone method using simple averages. The primary focus of this work is to evaluate different types of confidence intervals for these monotone nonparametric regression estimators through Monte Carlo simulation. Most of the confidence intervals use bootstrap or jackknife procedures. Estimation of a response variable as a function of two continuous predictor variables is considered, where the estimation is performed at the observed values of the predictors (instead of on a grid). The methods are then applied to data involving subjects that worked at plants that use beryllium metal who have developed chronic beryllium disease.     

Jackknife Estimation for Smooth Functions of the Parametric Component in Partially Linear Regression Models

Abstract

It is known that due to the existence of the nonparametric component, the usual estimators for the parametric component or its function in partially linear regression models are biased. Sometimes this bias is severe. To reduce the bias, we propose two jackknife estimators and compare them with the naive estimator. All three estimators are shown to be asymptotically equivalent and asymptotically normally distributed under some regularity conditions. However, through simulation we demonstrate that the jackknife estimators perform better than the naive estimator in terms of bias when the sample size is small to moderate. To make our results more useful, we also construct consistent estimators of the asymptotic variance, which are robust against heterogeneity of the error variances.     

On the Uniform Strong Consistency of Local Polynomial Regression Under Dependence Conditions

Abstract

In this article, nonparametric estimators of the regression function, and its derivatives, obtained by means of weighted local polynomial fitting are studied. Consider the fixed regression model where the error random variables are coming from a stationary stochastic process satisfying a mixing condition. Uniform strong consistency, along with rates, are established for these estimators. Furthermore, when the errors follow an AR(1) correlation structure, strong consistency properties are also derived for a modified version of the local polynomial estimators proposed by Vilar-Fernández and Francisco-Fernández (Vilar-Fernández, J. M., Francisco-Fernández, M. (2002 Vilar-Fernández, J. M. and Francisco-Fernández, M. 2002. Local polynomial regression smoothers with AR-error structure. TEST, 11(2): 439–464.  [Google Scholar]). Local polynomial regression smoothers with AR-error structure. TEST 11(2):439–464).     

Selection of Predictors in Distance-Based Regression

Distance-based regression is a prediction method consisting of two steps: from distances between observations we obtain latent variables which, in turn, are the regressors in an ordinary least squares linear model. Distances are computed from actually observed predictors by means of a suitable dissimilarity function. Being generally nonlinearly related with the response, their selection by the usual F tests is unavailable. In this article, we propose a solution to this predictor selection problem by defining generalized test statistics and adapting a nonparametric bootstrap method to estimate their p-values. We include a numerical example with automobile insurance data.     

Nonparametric Regression with Sample Design Following a Random Process

Nonparametric regression is considered where the sample point placement is not fixed and equispaced, but generated by a random process with rate n. Conditions are found for the random processes that result in optimal rates of convergence for nonparametric regression when using a block thresholded wavelet estimator. Previous results on nonparametric regression via wavelets on both fixed and random sample point placement are shown to be special cases of the general result given here. The estimator is adaptive over a large range of Hölder function spaces and the convergence rate exhibited is an improvement over term-by-term wavelet estimators. Threshold selection is implemented in a data-adaptive fashion, rather than using a fixed threshold as is usually done in block thresholding. This estimator, BlockSure, is compared against fixed-threshold block estimators and the more traditional term-by-term threshold wavelet estimators on several random design schemes via simulations.     

Sequential design for nonparametric inference

The performance of nonparametric function estimates often depends on the choice of design points. Based on the mean integrated squared error criterion, we propose a sequential design procedure that updates the model knowledge and optimal design density sequentially. The methodology is developed under a general framework covering a wide range of nonparametric inference problems, such as conditional mean and variance functions, the conditional distribution function, the conditional quantile function in quantile regression, functional coefficients in varying coefficient models and semiparametric inferences. Based on our empirical studies, nonparametric inference based on the proposed sequential design is more efficient than the uniform design and its performance is close to the true but unknown optimal design. The Canadian Journal of Statistics 40: 362–377; 2012 © 2012 Statistical Society of Canada     

On Semiparametric Mode Regression Estimation

It has been found that, for a variety of probability distributions, there is a surprising linear relation between mode, mean, and median. In this article, the relation between mode, mean, and median regression functions is assumed to follow a simple parametric model. We propose a semiparametric conditional mode (mode regression) estimation for an unknown (unimodal) conditional distribution function in the context of regression model, so that any m-step-ahead mean and median forecasts can then be substituted into the resultant model to deliver m-step-ahead mode prediction. In the semiparametric model, Least Squared Estimator (LSEs) for the model parameters and the simultaneous estimation of the unknown mean and median regression functions by the local linear kernel method are combined to infer about the parametric and nonparametric components of the proposed model. The asymptotic normality of these estimators is derived, and the asymptotic distribution of the parameter estimates is also given and is shown to follow usual parametric rates in spite of the presence of the nonparametric component in the model. These results are applied to obtain a data-based test for the dependence of mode regression over mean and median regression under a regression model.     

Nonparametric Regression as an Example of Model Choice

Nonparametric regression can be considered as a problem of model choice. In this article, we present the results of a simulation study in which several nonparametric regression techniques including wavelets and kernel methods are compared with respect to their behavior on different test beds. We also include the taut-string method whose aim is not to minimize the distance of an estimator to some “true” generating function f but to provide a simple adequate approximation to the data. Test beds are situations where a “true” generating f exists and in this situation it is possible to compare the estimates of f with f itself. The measures of performance we use are the L²- and the L^∞-norms and the ability to identify peaks.     

Partial deconvolution estimation in nonparametric regression

In this article, we propose a class of partial deconvolution kernel estimators for the nonparametric regression function when some covariates are measured with error and some are not. The estimation procedure combines the classical kernel methodology and the deconvolution kernel technique. According to whether the measurement error is ordinarily smooth or supersmooth, we establish the optimal local and global convergence rates for these proposed estimators, and the optimal bandwidths are also identified. Furthermore, lower bounds for the convergence rates of all possible estimators for the nonparametric regression functions are developed. It is shown that, in both the super and ordinarily smooth cases, the convergence rates of the proposed partial deconvolution kernel estimators attain the lower bound. The Canadian Journal of Statistics 48: 535–560; 2020 © 2020 Statistical Society of Canada     

Diagnosis of Multivariate Control Chart Signal Based on Dummy Variable Regression Technique

Abstract

It is common to monitor several correlated quality characteristics using the Hotelling's T ² statistic. However, T ² confounds the location shift with scale shift and consequently it is often difficult to determine the factors responsible for out of control signal in terms of the process mean vector and/or process covariance matrix. In this paper, we propose a diagnostic procedure called ‘D-technique’ to detect the nature of shift. For this purpose, two sets of regression equations, each consisting of regression of a variable on the remaining variables, are used to characterize the ‘structure’ of the ‘in control’ process and that of ‘current’ process. To determine the sources responsible for an out of control state, it is shown that it is enough to compare these two structures using the dummy variable multiple regression equation. The proposed method is operationally simpler and computationally advantageous over existing diagnostic tools. The technique is illustrated with various examples.     

Best Quadratic Unbiased Prediction in a General Linear Model with Stochastic Regression Coefficients

In this article, we discuss on how to predict a combined quadratic parametric function of the form β′ H β + hσ² in a general linear model with stochastic regression coefficients denoted by y  =  X β +  e . Firstly, the quadratic predictability of β′ H β + hσ² is investigated to obtain a quadratic unbiased predictor (QUP) via a general method of structuring an unbiased estimator. This QUP is also optimal in some situations and therefore we hope it will be a fine predictor. To show this idea, we apply the Lagrange multipliers method to this problem and finally reach the expected conclusion through permutation matrix techniques.     

A simple test for comparing regression curves versus one-sided alternatives

In this article we present a simple procedure to test for the null hypothesis of equality of two regression curves versus one-sided alternatives in a general nonparametric and heteroscedastic setup. The test is based on the comparison of the sample averages of the estimated residuals in each regression model under the null hypothesis. The test statistic has asymptotic normal distribution and can detect any local alternative of rate n^-1/2. Some simulations and an application to a data set are included.     

Semiparametric multiple kernel estimators and model diagnostics for count regression functions

Abstract

This study concerns semiparametric approaches to estimate discrete multivariate count regression functions. The semiparametric approaches investigated consist of combining discrete multivariate nonparametric kernel and parametric estimations such that (i) a prior knowledge of the conditional distribution of model response may be incorporated and (ii) the bias of the traditional nonparametric kernel regression estimator of Nadaraya-Watson may be reduced. We are precisely interested in combination of the two estimations approaches with some asymptotic properties of the resulting estimators. Asymptotic normality results were showed for nonparametric correction terms of parametric start function of the estimators. The performance of discrete semiparametric multivariate kernel estimators studied is illustrated using simulations and real count data. In addition, diagnostic checks are performed to test the adequacy of the parametric start model to the true discrete regression model. Finally, using discrete semiparametric multivariate kernel estimators provides a bias reduction when the parametric multivariate regression model used as start regression function belongs to a neighborhood of the true regression model.