Evaluation of scheduling strategies for a dynamic job shop in a tool-shared,flexible manufacturing environment

A two-phase approach is used to examine the impact of job scheduling rules and tool selection policies for a dynamic job shop system in a tool-shared, flexible manufacturing environment. The first phase develops a generalized simulation model and analyses 'simple' job scheduling rules and tool selection policies under various operating scenarios. The results from this investigation are then used to develop and analyse various bi-criteria rules in the second phase of this study. The results show that the scheduling rules have the most significant impact on system performance, particularly at high shop load levels. Tool selection policies affect some of the performance measures, most notably, proportion of tardy jobs, to a lesser degree. Higher machine utilizations can be obtained at higher tool duplication levels but at the expense of increased tooling costs and lower tool utilization. The results also show that using different processing time distributions may have a significant impact on shop performance.     

Integrating MRP and finite capacity planning

Traditional production control systems based on the manufacturing resource planning concept do not sufficiently support the planner in solving capacity problems, ignore capacity constraints and assume that lead times are fixed. This leads to problems on the shop floor, that cannot be resolved in the short term. This paper focuses on solving these capacity problems by improving capacity planning at the material requirements planning MRP level through integration of MRP and finite capacity planning. This results in a planning method for simultaneous capacity and material planning. The planning method is based on a new and more accurate primary process model, giving the planning algorithm more flexibility in solving capacity problems. The algorithm is based on advanced scheduling techniques and uses aggregated information, thus combining speed and accuracy. The algorithm is designed to use the available flexibility: alternative routeings, safety stock, and replanning of production orders and requirements. This paper also discusses such related issues as robustness, memory and the role of the human planner.     

Application of the Net Present Value Criterion in Random and Flow Shop Scheduling*

While the majority of the literature on shop scheduling has emphasized time-based performance criteria such as mean flow time, lateness, and tardiness, the primary goal of management should be the maximization of shop profitability. In this research the net present value (NPV) criterion is introduced to measure shop profitability. This measure combines aspects of job flow time and inventory holding costs into a single measure. A simulation model of a job shop is used to examine the performance of a variety of time- and value-based scheduling rules. These rules are evaluated with respect to the NPV criterion in both random and flow shop environments. The results suggest that priority rules that utilize monetary information about jobs yield a higher NPV than many time-based rules in most situations, with little sacrifice in job tardiness. A well-researched time-based rule, critical ratio, also provides excellent performance when the shop is heavily loaded.     

A simulation study of performance of MRP based systems under interaction effects

This paper pertains to a study carried out on a typical Material Requirements Planning (MRP) based system. An integrated MRP based system was developed. This integrated package facilitates studying the effects of variations in Master Production Schedules (MPS), Bill of Materials (BOM) structure, inventory supports, lot sizing, capacity planning, scheduling rules and shop floor conditions. The system behaviour is captured using simulation. The direct and interacting roles of uncertainties, capacity variations, scheduling rules and lot sizing rules on the system performance have been studied in detail. The details of the system, the modules and their capabil-iiies and the analyses of results are presented in this paper.     

Freezing the master production schedule in multilevel material requirements planning systems under deterministic demand

This paper extends the studies by Sridharan, Berry, and Udayabhanu from single-level MPS systems to multilevel material requirements planning (MRP) systems, and examines the impact of product structure, lot-sizing rules and cost parameters upon the selection of MPS freezing parameters under deterministic demand. A model is built to simulate the master production scheduling and material requirements planning operations in a make-to-order environment. The results show that all the MPS freezing parameters studied have a significant impact upon total inventory costs and schedule instability in multilevel MRP systems. First, the order-based freezing method is preferable to the period-based method. Secondly, the study finds that increasing the freezing proportion reduces both total inventory costs and schedule instability. This finding contradicts the finding by Sridharan et al. in single-level systems. Thirdly, the study finds that a higher replanning periodicity results in both lower total inventory cost and lower schedule instability. The study also indicates that the product structure and lot-sizing rules do not significantly influence the selection of MPS freezing parameters in a practical sense under most situations. However, the cost parameter seems to significantly influence the selection of replanning periodicity.     

多功能机床环境下的Job Shop问题研究

本文引入工序机的概念描述加工系统的资源,建立了面向多功能加工机床的Job Shop作业计划模型,用遗传算法对所建的模型进行优化。在遗传算法优化搜索的基础上,利用工件、工序机和实际机床之间的动态调度使作业计划更趋合理。最后给出数值试验结果。     

A simulated annealing algorithm for job shop scheduling

In this paper, the job shop scheduling problem is considered with the objective of minimization of makespan time. We first reviewed the literature on job shop scheduling using meta-heuristics. Then a simulated annealing algorithm is presented for scheduling in a job shop. To create neighbourhoods, three perturbation schemes, viz. pairwise exchange, insertion, and random insertion are used, and the effect of them on the final schedule is also compared. The proposed simulated annealing algorithm is compared with existing genetic algorithms and the comparative results are presented. For comparative evaluation, a wide variety of data sets are used. The proposed algorithm is found to perform well for scheduling in the job shop.     

MULTI-MACHINE,MULTI-PRODUCT PRODUCTION SCHEDULING AND INVENTORY CONTROL

This paper deals with a multi-machine, multi-product lot size determination and scheduling problem. The model developed here considers not only the usual inventory-related operational cost, but also the costs that depend on under- or over-utilization of available men and machines. It penalizes overtime or idle time at any facility. The solution minimizes the inventory and resource-related costs and not just inventory costs. A heuristic is developed to determine the solution from the model and to modify it, as necessary, to obtain a conflict-free, repetitive, and cyclic production schedule for an infinite horizon. Although this model is developed for a manufacturing situation, the words machine, job, and machine shop are used in a symbolic sense, and hence the model can be used in practice in a variety of circumstances.     

Order Promising and the Master Production Schedule*

Previous research on material requirements planning (MRP) systems has rarely considered the impact of the master production scheduling method used to promise customer orders and to allocate production capacity. Based on a simulation study of an MRP environment, we show that the correct selection of a master production schedule (MPS) method depends on the variance of end-item demand. In addition, we find evidence that the effectiveness of a particular MPS method can be enhanced by holding buffer inventory at the same level in the product structure as in the MPS.     

A New Framework for Manufacturing Planning and Control Systems*

This paper presents a new framework for manufacturing planning and control systems which we call iterative manufacturing planning in continuous time (IMPICT) that appears to have several advantages over the well-known material requirements planning (MRP) framework. IMPICT explicitly considers capacity constraints and total system cost (including tardiness) to determine order sizes, order release/due dates, and operation schedules in a deterministic, multi-level, finite horizon, dynamic demand environment. Continuous time scheduling variables allow setups to be carried over from one period to the next. Three new heuristics built on the IMPICT framework are presented and tested in a simulation-based, full-factorial experiment with a wide variety of problem environments. The benchmark for the experiment was materials requirements planning with operations sequencing (MRP/OS) implemented with best-case, fixed planned lead times. The experiment showed that all three heuristics were statistically better than MRP/OS. The total cost for the order merging (OM) heuristic was 25 percent better than the total cost for MRP/OS. Computational times for OM were substantially larger than for MRP/OS; however, the computational times in the experiment suggest that OM is still computationally viable for large-scale batch manufacturing environments found in industry. IMPICT is superior to standard MRP systems because it explicitly considers capacity constraints and total system costs when it creates a materials plan. IMPICT is superior to linear programming-based approaches to finite loading and scheduling found in the literature because it allows setups to be carried over from one period to another and because it is computationally viable for realistic-sized problems.     

Dynamic selection of dispatching rules for job shop scheduling

Although the academic contribution to job shop scheduling is abundant, its impact on practice has been minimal. The most preferred approach to job shop scheduling in the industry is dispatching rules. A major criticism against dispatching rules is that there is no single universal rule. The effective choice of dispatching rules depends on the scheduling criterion and existing job shop conditions. In this paper, the authors have proposed a scheduling method based on the analytic hierarchy process, that dynamically selects the most appropriate dispatching rule from several candidate rules. The selection is based on the existing job shop conditions. This method is applied to two formal job shop problems, and the results for single dispatching rules are inferior to the method proposed in this paper.     

An Experimental Comparison of Time-Based and Economic-Based Scheduling Methods to Maximize Net Present Value*

In the past, performance in dynamic-scheduling environments was primarily measured in terms of time or physical shop characteristics. Objectives such as mean tardiness, flow time, and work-in-process inventory were commonly used. Today, there is increasing interest in the use of more advanced economic performance measures. These measures have the more comprehensive objective of maximizing ownership wealth by economically scheduling jobs and tasks. This study presents a large-scale experiment testing time-based and economic-based scheduling methods in a dynamic job shop. These methods are evaluated on their ability to maximize net present value (NPV). The study considers the just-in-time (JIT) delivery environment. The job shop is hypothetical, but is based on models of real production situations. Results show that the use of very detailed economic information in a sophisticated manner generally improves economic performance. Where due dates are easy to achieve, however, time-based scheduling methods are at least as good as those based on economics. Also, where utilization is high and due dates tight, early cost information in release and dispatch is detrimental to schedule value.     

A Virtual Cellular Manufacturing Approach to Batch Production*

In this paper, Virtual Cellular Manufacturing (VCM), an alternative approach to implementing cellular manufacturing, is investigated. VCM combines the setup efficiency typically obtained by Group Technology (GT) cellular manufacturing (CM) systems with the routing flexibility of a job shop. Unlike traditional CM systems in which the shop is physically designed as a series of cells, family-based scheduling criteria are used to form logical cells within a shop using a process layout. The result is the formation of temporary, virtual cells as opposed to the more traditional, permanent, physical cells present in GT systems. Virtual cells allow the shop to be more responsive to changes in demand and workload patterns. Production using VCM is compared to production using traditional cellular and job shop approaches. Results indicate that VCM yields significantly better flow time and due date performance over a wide range of common operating conditions, as well as being more robust to demand variability.     

An Experimental Analysis of Capacity-Sensitive Setup Parameters for MRP Lot Sizing

Most material requirements planning (MRP) systems apply standard costing (absorption costing) approaches to define setup costs that are used as fixed (time invariant) setup parameters in single-level lot-sizing methods. This paper presents a computationally simple approach for estimating more appropriate setup parameters based on estimates of work-center shadow prices. These setup parameters then are used in traditional single-level MRP lot-sizing procedures. The shadow price of capacity at each work center is calculated as the increase in the overall inventory carrying cost for each additional hour of capacity lost to setups. The opportunity cost of a setup for an order subsequently is determined based on the routing information for each order and is used by traditional MRP lot-sizing procedures to calculate lot sizes. A simulation experiment compares the performance period order quantity lot sizing with capacity-sensitive setup parameters with the fixed accounting-based setup parameters. The simulation replicates the planning and control functions of a typical MRP system. The results of the experiment show that capacity-sensitive setup parameters can make significant reductions in both carrying cost and lateness and can achieve many of the benefits of optimized production technology in the context of an MRP system.     

Dynamic scheduling of manufacturing job shops using extreme value theory

Most job shop scheduling approaches reported in the literature assume that the scheduling problem is static (i.e. job arrivals and the breakdowns of machines are neglected) and in addition, these scheduling approaches may not address multiple criteria scheduling or accommodate alternate resources to process a job operation. In this paper, a scheduling method based on extreme value theory (SEVAT) is developed and addresses all the shortcomings mentioned above. The SEVAT approach creates a statistical profile of schedules through random sampling, and predicts the quality or 'potential' of a feasible schedule. A dynamic scheduling problem was designed to reflect a real job shop scheduling environment closely. Two performance measures, viz. mean job tardiness and mean job cost, were used to demonstrate multiple criteria scheduling. Three factors were identified, and varied between two levels each, thereby spanning a varied job shop environment. The results of this extensive simulation study show that the SEVAT scheduling approach produces a better performance compared to several common dispatching rules.     

Operation-based flowtime estimation in a dynamic job shop

In the scheduling literature, estimation of job flowtimes has been an important issue since the late 1960s. The previous studies focus on the problem in the context of due date assignment and develop methods using aggregate information in the estimation process. In this study, we propose a new flowtime estimation method that utilizes the detailed job, shop and route information for operations of jobs as well as the machine imbalance information. This type of information is now available in computer-integrated manufacturing systems. The performance of the proposed method is measured by computer simulation under various experimental conditions. It is compared with the existing flowtime estimation methods for a wide variety of performance measures. The results indicate that the proposed method outperforms all the other flowtime estimation methods. Moreover, it is quite robust to changing shop conditions (i.e., machine breakdowns, arrival rate and processing time variations, etc.). A comprehensive bibliography is also provided in the paper.     

Concepts,Theory, and Techniques A JOINT LOT-SIZING RULE FOR FIXED LABOR-COST SITUATIONS

Many American firms are implementing just-in-time production in order to minimize inventories, reduce flow time, and maximize resource utilization. These firms recognize that, in the short run, setup costs really are fixed expenses and it is available capacity which is the critical factor in determining production-run quantities. We propose using available capacity to increase the number of setups and reduce lot-size inventories. This results in improved relevant cost performance. Sugimori, Kusunoki, Cho, and Uchikawa [16] in their paper on the Toyota kanban system developed a relationship for lead time but failed to use it for lot sizing. We use this relationship to develop the joint lot-sizing rule. The efficacy of our proposed rule is demonstrated by applying it to lot-size scheduling problems at the John Deere Engine Works [14]. Extensions of the proposed rule to undercapacity situations with material-wastage costs in the setup processes and to multistate production inventory systems also are discussed.     

Interactive Job Shop Scheduling: An Experiment

An experiment is discussed in which three computer-aided, interactive job shop scheduling approaches are compared using an interactive job shop scheduling simulator (JOB) developed for the project. All three approaches use a combination of computer and human capabilities to develop job shop schedules, but differ in terms of the timing and degree of human involvement required. The three scheduling approaches are (1) the successive approach, (2) the interactive approach, and (3) the semi-interactive approach. The successive approach is characterized by the computer scheduling all work orders without any human intervention. The interactive approach is distinguished by the human scheduling one work order at a time until all work orders are scheduled. The schedule is developed interactively by the person who must simultaneously consider work-order scheduling needs and machine group load capacities. The semi-interactive approach may be viewed as a combination of the successive and interactive approaches. Work orders are automatically scheduled one at a time using the successive approach criteria, but with prespecified machine-group load thresholds. As long as the load threshold is not exceeded, the successive approach is used to schedule work orders. When a threshold is exceeded, the algorithm (successive approach) pauses and human rescheduling (interactive approach) is required to rectify the overload situation. A second (reallocation) phase, identical for all three approaches, is used to overcome any scheduling problems generated in phase one. Experimental results based on nine different performance criteria (including scheduling time, makespan, machine group utilization, and work-in-process inventory) and 45 experimental runs indicate that there are differences between the results produced by the three scheduling approaches. The interactive approach yields the best overall scheduling results, but the other two approaches are clearly better than the interactive approach in some situations. The success of the interactive approach indicates that it is usually best for the human scheduler to become involved early in the computer-based job shop scheduling process.     

Optimal and Heuristic Models for Lot Splitting in a Flow Shop

This paper investigates optimal lot-splitting policies in a multiprocess flow shop environment with the objective of minimizing either mean flow time or makespan. Using a quadratic programming approach to the mean flow time problem, we determine the optimal way of splitting a job into smaller sublots under various setup times to run time ratios, number of machines in the flow shop, and number of allowed sublots. Our results come from a deterministic flow shop environment, but also provide insights into the repetitive lots scheme using equal lot splits for job shop scheduling in a stochastic environment. We indicate those conditions in which managers should implement the repetitive lots scheme and where other lot-splitting schemes should work better.     

Route‐Independent Analysis of Available Capacity in Flexible Manufacturing Systems

In a job shop, because of large setup times, each operation is assigned to only one machine. There is no alternative routing. In a flexible manufacturing system, each manufacturing operation can often be performed on several machines. Therefore, with automated equipment, the capacity of a machine to perform certain operations is not independent of the capacity of other machines. Often, however, operations managers can use a route‐independent answer to production planning questions. For example, how much can be produced of a certain part type and when are important capacity questions in business negotiations, when the detailed routing and scheduling are not yet of interest or cannot be known. This paper provides a mathematical model for the route‐independent analysis of the capacity of flexible manufacturing systems based on a concept of operation types. An example is provided both to illustrate the use of operation types and to highlight the differences between the traditional route‐dependent and the proposed route‐independent formulations of capacity constraints. Some computational results are also given. Finally, a sensitivity analysis is developed to analyze the feasibility of production plans when production requirements and machine capacities can change.