Construction of Efficient Multi-Level k-Circulant Supersaturated Designs

This article proposes an algorithm to construct efficient balanced multi-level k-circulant supersaturated designs with m factors and n runs. The algorithm generates efficient balanced multi-level k-circulant supersaturated designs very fast. Using the proposed algorithm many balanced multi-level supersaturated designs are constructed and cataloged. A list of many optimal and near optimal, multi-level supersaturated designs is also provided for m ≤ 60 and number of levels (q) ≤10. The algorithm can be used to generate two-level k-circulant supersaturated designs also and some large optimal two-level supersaturated designs are presented. An upper bound to the number of factors in a balanced multi-level supersaturated design such that no two columns are fully aliased is also provided.     

AN ALGORITHM FOR THE CONSTRUCTION OF OPTIMAL OR NEAR-OPTIMAL CHANGE-OVER DESIGNS

This paper presents an algorithm for the construction of optimal or near optimal change-over designs for arbitrary numbers of treatments, periods and units. Previous research on optimality has been either theoretical or has resulted in limited tabulations of small optimal designs. The algorithm consists of a number of steps:first find an optimal direct treatment effects design, ignoring residual effects, and then optimise this class of designs with respect to residual effects. Poor designs are avoided by judicious application of the (M, S)-optimality criterion, and modifications of it, to appropriate matrices. The performance of the algorithm is illustrated by examples.     

Locally optimal designs for some dose–response models with continuous endpoints

We consider the problem of constructing static (or non sequential), approximate optimal designs for a class of dose–response models with continuous outcomes. We obtain conditions for a design being D-optimal or c-optimal. The designs are locally optimal in that they depend on the model parameters. The efficiency studies show that these designs have high efficiency when the mis-specification of the initial values of model parameters is not severe. A case study indicates that using an optimal design may result in a significant saving of resources.     

Optimal balanced block designs for correlated observations

The construction of universally optimal designs, if such exist, is difficult to obtain, especially when there are some nuisance effects or correlated errors. The hub correlation is a special correlation structure with applications to experiments in genetics, networks and other areas in industry and agriculture. There may be restrictions on the correlation values of the hub structure depending on the experiment. Optimality of block designs under hub correlation has been studied for the case of a constant correlation value. In this article, we consider the hub structure when one of the correlation values is different from the others, and the universally optimal block designs, binary or non-binary, are theoretically obtained. Also, we introduce an algorithm to construct the optimal designs. The Canadian Journal of Statistics 48: 596–604; 2020 © 2020 Statistical Society of Canada     

An optimal sign test for one-sample bivariate location model using an alternative bivariate ranked-set sample

The aim of this paper is to find an optimal alternative bivariate ranked-set sample for one-sample location model bivariate sign test. Our numerical and theoretical results indicated that the optimal designs for the bivariate sign test are the alternative designs with quantifying order statistics with labels {((r+1)/2, (r+1)/2)}, when the set size r is odd and {(r/2+1, r/2), (r/2, r/2+1)} when the set size r is even. The asymptotic distribution and Pitman efficiencies of these designs are derived. A simulation study is conducted to investigate the power of the proposed optimal designs. Illustration using real data with the Bootstrap algorithm for P-value estimation is used.     

Robustness properties of minimally‐supported Bayesian D‐optimal designs for heteroscedastic models

Bayesian D‐optimal designs supported on a fixed number of points were found by Dette & Wong (1998) for estimating parameters in a polynomial model when the error variance depends exponentially on the explanatory variable. The present authors provide optimal designs under a broader class of error variance structures and investigate the robustness properties of these designs to model and prior distribution assumptions. A comparison of the performance of the optimal designs relative to the popular uniform designs is also given. The authors' results suggest that Bayesian D‐optimal designs suported on a fixed number of points are more likely to be globaly optimal among all designs if the prior distribution is symmetric and is concentrated around its mean.     

D-Optimal Two-Level Fractional Factorial Designs of Resolution III with Two Dispersion Factors

The problem of finding D-optimal designs, with two dispersion factors, for the estimation of all location main effects is investigated in the class of regular unreplicated two-level fractional factorial designs of resolution III. Designs having length three words involving both of the dispersion factors in the defining relation are shown to be inferior in terms of D-optimality. Tables of factors that are named as the two dispersion factors so that the resulting design is either D-optimal or has the largest determinant of the information matrix are provided. Rank-order of designs is studied when the number of length three words involving either one of the dispersion factors and the number of length four words involving both of the dispersion factors are fixed. Rank-order of designs when the numbers of aforementioned words are less than or equal to ten is given.     

D-minimax Second-order Designs Over Hypercubes for Extrapolation and Restricted Interpolation Regions

The D-minimax criterion for estimating slopes of a response surface involving k factors is considered for situations where the experimental region χ and the region of interest ? are co-centered cubes but not necessarily identical. Taking χ = [ ? 1, 1]^k and ? = [ ? R, R]^k, optimal designs under the criterion for the full second-order model are derived for various values of R and their relative performances investigated. The asymptotically optimal design as R → ∞ is also derived and investigated. In addition, the optimal designs within the class of product designs are obtained. In the asymptotic case it is found that the optimal product design is given by a solution of a cubic equation that reduces to a quadratic equation for k = 3?and?6. Relative performances of various designs obtained are examined. In particular, the optimal asymptotic product design and the traditional D-optimal design are compared and it is found that the former performs very well.     

Optimal designs for statistical analysis with Zernike polynomials

The Zernike polynomials arise in several applications such as optical metrology or image analysis on a circular domain. In the present paper, we determine optimal designs for regression models which are represented by expansions in terms of Zernike polynomials. We consider two estimation methods for the coefficients in these models and determine the corresponding optimal designs. The first one is the classical least squares method and Φ _p -optimal designs in the sense of Kiefer [Kiefer, J., 1974, General equivalence theory for optimum designs (approximate theory). Annals of Statistics, 2 849–879.] are derived, which minimize an appropriate functional of the covariance matrix of the least squares estimator. It is demonstrated that optimal designs with respect to Kiefer's Φ _p -criteria (p>?∞) are essentially unique and concentrate observations on certain circles in the experimental domain. E-optimal designs have the same structure but it is shown in several examples that these optimal designs are not necessarily uniquely determined. The second method is based on the direct estimation of the Fourier coefficients in the expansion of the expected response in terms of Zernike polynomials and optimal designs minimizing the trace of the covariance matrix of the corresponding estimator are determined. The designs are also compared with the uniform designs on a grid, which is commonly used in this context.     

PARTIALLY EQUINEIGHBOURED DESIGNS

This paper presents further results on a class of designs called equineighboured designs, ED. These designs are intended for field and related experiments, especially whenever there is evidence that observations in the same block are correlated. An ED has the property that every unordered pair of treatments occurs as nearest neighbours equally frequently at each level. Ipinyomi (1986) has defined and shown that ED are balanced designs when neighbouring observations are correlated. He has also presented ED as a continuation of the development of optimal block designs. An ED would often require many times the number of experimental materials needed for the construction of an ordinary balanced incomplete block, BIB, design for the same number of treatments and block sizes. Thus for a relatively large number of treatments and block sizes the required minimum number of blocks may be excessively large for practical use of ED. In this paper we shall define and examine partially equineighboured designs with n concurrences, PED (n), as alternatives where ED are practically unachievable. Particular attention will be given to designs with smaller numbers of blocks and for which only as little balance as possible may be lost.     

Optimal blocked main effects plans

In this paper, we consider the construction of optimal blocked main effects designs where m two-level factors are to be studied in N runs which are partitioned into b blocks of equal size. For N ≡ 2±od4 sufficient conditions are derived for a design to be Φ _f optimal among all designs having main effects occurring equally often at their high and low levels within blocks and then this result is extended to the class of all designs for the case when the block size is two. Methods of constructing designs satisfying the sufficient conditions derived are also given.     

A-optimal designs for heteroscedastic multifactor regression models

Abstract

This paper searches for A-optimal designs for Kronecker product and additive regression models when the errors are heteroscedastic. Sufficient conditions are given so that A-optimal designs for the multifactor models can be built from A-optimal designs for their sub-models with a single factor. The results of an efficiency study carried out to check the adequacy of the products of optimal designs for uni-factor marginal models when these are used to estimate different multi-factor models are also reported.     

Optimal Designs for the Carryover Model with Random Interactions Between Subjects and Treatments

The paper considers a model for crossover designs with carryover effects and a random interaction between treatments and subjects. Under this model, two observations of the same treatment on the same subject are positively correlated and therefore provide less information than two observations of the same treatment on different subjects. The introduction of the interaction makes the determination of optimal designs much harder than is the case for the traditional model. Generalising the results of Bludowsky's thesis, the present paper uses Kushner's method to determine optimal approximate designs. We restrict attention to the case where the number of periods is less than or equal to the number of treatments. We determine the optimal designs in the important special cases that the number of periods is 3, 4 or 5. It turns out that the optimal designs depend on the variance of the random interactions and in most cases are not binary. However, we can show that neighbour balanced binary designs are highly efficient, regardless of the number of periods and of the size of the variance of the interaction effects.     

A comparison study of effectiveness and robustness of robust economic designs of T2 chart using genetic algorithm

ABSTRACT

Recently, researchers have tried to design the T² chart economically to achieve the minimum possible quality cost; however, when T² chart is designed, it is important to consider multiple scenarios. This research presents the robust economic designs of the T² chart where there is more than one scenario. An illustrative example is used to demonstrate the effect of the model parameters on the optimal designs. The genetic algorithm optimization method is employed to obtain the optimal designs. Simulation studies show that the robust economic designs of T² chart are more effective than traditional economic design in practice.     

Optimal design in average for inference in generalized linear models

This paper considers the problem of optimal design for inference in Generalized Linear Models, when prior information about the parameters is available. The general theory of optimum design usually requires knowledge of the parameter values. These are usually unknown and optimal design can, therefore, not be used in practice. However, one way to circumvent this problem is through so-called “optimal design in average”, or shortly, “ave optimal”. The ave optimal design is chosen to minimize the expected value of some criterion function over a prior distribution. We focus our interest on the aveD _A-optimality, including aveD- and avec-optimality and show the appropriate equivalence theorems for these optimality criterions, which give necessary conditions for an optimal design. Ave optimal designs are of interest when e.g. a factorial experiment with a binary or a Poisson response in to be conducted. The results are applied to factorial experiments, including a control group experiment and a 2×2 experiment.     

Optimal Designs for Random Coefficient Regression Models with Heteroscedastic Errors

The purpose of this article is to present the optimal designs based on D-, G-, A-, I-, and D _β-optimality criteria for random coefficient regression (RCR) models with heteroscedastic errors. A sufficient condition for the heteroscedastic structure is given to make sure that the search of optimal designs can be confined at extreme settings of the design region when the criteria satisfy the assumption of the real valued monotone design criteria. Analytical solutions of D-, G-, A-, I-, and D _β-optimal designs for the RCR models are derived. Two examples are presented for random slope models with specific heteroscedastic errors.     

Lee discrepancy on mixed two- and three-level uniform augmented designs

Follow-up experiment is widely applied to various fields such as science and engineering, since it is an indispensable strategy, especially when some additional resources or information become available after the initial design of experiment is carried out. Moreover, some extra factors may be added in the follow-up experiment. One may augment the number of runs and/or factors for the purpose of application. In this paper, the issue of the uniform row augmented designs and column augmented designs with mixed two- and three-level is investigated. The uniformity of augmented designs is discussed under the Lee discrepancy, some lower bounds of Lee discrepancy for the augmented designs are obtained. The construction algorithm of the uniform augmented designs is given. Some numerical examples indicate that uniform augmented designs can be constructed with high efficiency.     

OPTIMAL DESIGNS FOR 2 k PAIRED COMPARISON EXPERIMENTS

In this paper we establish the form of the optimal paired comparison design when there are k attributes, each with two levels, for testing for main effects, for main effects and two factor interactions and for main effects and two and three factor interactions. In all cases we assume that all pairs with the same number of attributes different appear equally often. In this setting the D and A optimal designs for main effects are the foldover pairs and those for main effects and two factor interactions have pairs in which about half the attributes are different.     

Rational Regression Models with Continuous Chebyshev Design

In rational regression models, the G-optimal designs are very difficult to derive in general. Even when an G-optimal design can be found, it has, from the point of view of modern nonparametric regression, certain drawbacks because the optimal design crucially depends on the model. Hence, it can be used only when the model is given in advance. This leads to the problem of finding designs which would be nearly optimal for a broad class of rational regression models. In this article, we will show that the so-called continuous Chebyshev Design is a practical solution to this problem.     

Optimal designs for calibration of orientations

This paper concerns designed experiments involving observations of orientations following the models of Prentice (1989) and Rivest &Chang (2006). The authors state minimal conditions on the designs for consistent least squares estimation of the matrix parameters in these models. The conditions are expressed in terms of the axes and rotation angles of the design orientations. The authors show that designs satisfying U₁ + … + U_n = 0 are optimal in the sense of minimizing the estimation error average angular distance. The authors give constructions of optimal n‐point designs when n ≥ 4 and they compare the performance of several designs through approximations and simulation.