Using a Single Average Loss Control Chart to Monitor Process Mean and Variability

A single chart, instead of X-bar and R charts or X-bar and S charts, to monitor simultaneously the process mean and the variability if found would cut down the time and effort. Some researches have been done in finding such charts. In reality, process target is more important than process mean. A much easier average loss chart is first proposed here to detect the increases in the difference of the process mean and the target and the variability simultaneously. An example of the customer complaint processing time of the customer service center of an IT company shows the application and the performance of the proposed average loss control chart. Furthermore, a more efficient optimal average loss chart with variable sampling intervals is proposed and performs better than the average loss chart with fixed sampling intervals and the Shewhart joint X-bar and S charts. Some numerical analyses demonstrated the findings.     

On the Superiority of a Variable Sampling Interval Control Chart

The paper establishes the analytical grounds of the uniform superiority of a variable sampling interval (VSI) Shewhart control chart over the conventional fixed sampling interval (FSI) control chart, with respect to the zero-time performance, for a wide class of process distributions. We provide a sufficient condition on the distribution of a control chart statistic, and propose a criterion to determine the control limits and the regions in the in-control area of the VSI chart, corresponding to the different sampling intervals used by it. The condition and the criterion together ensure the uniform zero-time superiority of the VSI chart over the matched FSI chart, in detecting a process shift of any magnitude. It is shown that normal, Student's t and Laplace distributions satisfy the sufficient condition. In addition, chi-square, F and beta distributions satisfy it, provided that these are not extremely skewed. Further, it is illustrated that the superiority of the VSI feature is not trivial and cannot be assured if the sufficient condition is not satisfied or the control limits and the regions are not determined according to the proposed criterion. An application of the result to confirm the superiority of the VSI feature is demonstrated for the control chart for individual observations used to monitor a milk-pouch filling process.     

Economic design of &Xmacron; charts with variable parameters: the Markov chain approach

This paper presents an economic design of &Xmacron; control charts with variable sample sizes, variable sampling intervals, and variable control limits. The sample size n, the sampling interval h, and the control limit coefficient k vary between minimum and maximum values, tightening or relaxing the control. The control is relaxed when an &Xmacron; value falls close to the target and is tightened when an &Xmacron; value falls far from the target. A cost model is constructed that involves the cost of false alarms, the cost of finding and eliminating the assignable cause, the cost associated with production in an out-of-control state, and the cost of sampling and testing. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A comprehensive study is performed to examine the economic advantages of varying the &Xmacron; chart parameters.     

Design of adaptive s control charts

The Shewhart s chart has been widely used to monitor the standard deviation of a process. However, the main disadvantage of an s chart is its slowness to signal small increases in the variability. In this paper, ideas of adaptive control charts are extended to the Shewhart s chart for improving the efficiency in signalling increases in the standard deviation. A Markov chain model is applied to evaluate its performances and compares its performances with combined double sampling and variable sampling intervals s chart, variable parameters (VP) R chart, exponentially weighted moving average and Cusum charts. The statistical performances show that the VP s chart is more sensitive to increases in standard deviation.     

Economic and economic–statistical designs of VSI Bayesian control chart using Monte Carlo method and ABC algorithm

The usual practice in using a Bayesian control chart to monitor a process is done by taking samples from the process with fixed sampling intervals. Recent studies on traditional control charts have shown that variable sampling interval (VSI) scheme compared to classical scheme (fixed ratio sampling, FRS) helps practitioners to detect process shifts more quickly. In this paper, the effectiveness of VSI scheme on performance of Bayesian control chart has been studied, based on economic (ED) and economic–statistical designs (ESD). Monte Carlo method and artificial bee colony algorithm have been utilized to obtain optimal design parameters of Bayesian control chart (sample size, sampling intervals, warning limit and control limit) since the statistic of this approach does not have any specified distribution. Finally, VSI Bayesian control chart has been compared to FRS Bayesian and VSI X-bar approaches based on ED and ESD, separately. According to the results, it has been found that the performance of VSI Bayesian scheme is better than FRS Bayesian and VSI X-bar approaches.     

Designing of variables quick switching sampling system by considering process loss functions

This paper proposes a variables quick switching system where the quality characteristic of interest follows a normal distribution and the quality characteristic is evaluated through a process loss function. Most of the variables sampling plans available in the literature focus only on the fraction non-conforming and those plans do not distinguish between the products that fall within the specification limits. The products that fall within specification limits may not be good if their mean is too away from the target value. So developing a sampling plan by considering process loss is inevitable in these situations. Based on this idea, we develop a variables quick switching system based on the process loss function for the application of the processes requiring low process loss. Tables are also constructed for the selection of parameters of variables quick switching system for given acceptable quality level and limiting quality level. The results are explained with examples.     

An Improved Distribution-free EWMA Mean Chart

Control charts are effective tools for signal detection in both manufacturing processes and service processes. Much service data come from a process with variables having nonnormal or unknown distributions. The commonly used Shewhart variable control charts, which depend heavily on the normality assumption, should not be properly used here. In this article, we propose an improved asymmetric EWMA mean chart based on a simple statistic to monitor process mean shift. We explored the sampling properties of the new monitoring statistic and calculated the average run lengths of the proposed asymmetric EWMA mean chart. We recommend the proposed improved asymmetric EWMA mean chart because the average run lengths of the modified charts are more accurate and reasonable than those of the five existed mean charts. A numerical example of service times with a right skewed distribution from a service system of a bank branch is used to illustrate the application of the improved asymmetric EWMA mean chart and to compare it with the five existing mean charts. The proposed chart showed better detection performance than those of the five existing mean charts in monitoring and detecting shifts in the process mean.     

Economic-statistical design of X ¥ charts for non-normal data by considering quality loss

When the X ¥ control chart is used to monitor a process, three parameters should be determined: the sample size, the sampling interval between successive samples, and the control limits of the chart. Duncan presented a cost model to determine the three parameters for an X ¥ chart. Alexander et al. combined Duncan's cost model with the Taguchi loss function to present a loss model for determining the three parameters. In this paper, the Burr distribution is employed to conduct the economic-statistical design of X ¥ charts for non-normal data. Alexander's loss model is used as the objective function, and the cumulative function of the Burr distribution is applied to derive the statistical constraints of the design. An example is presented to illustrate the solution procedure. From the results of the sensitivity analyses, we find that small values of the skewness coefficient have no significant effect on the optimal design; however, a larger value of skewness coefficient leads to a slightly larger sample size and sampling interval, as well as wider control limits. Meanwhile, an increase on the kurtosis coefficient results in an increase on the sample size and wider control limits.     

Estimation of multiple correlation coefficient when observations are missing on one of the variables

This paper proposes a control chart with variable sampling intervals (VSI) to detect increases in the expected value of the number of defects in a random sample of constant size n the upper one-sided c-VSI chart

The performance of this chart is evaluated by means of the average time to signal (ATS).The comparisons made between the standard FSI (fixed sampling intervals) and the VSI upper one-sided c - charts indicate that using variable sampling intervals can substantially reduce the average time to signal. Using stochastic ordering we prove that this reduction always occurs.

Special attention is given to the choice of the proposed control chart parameters and to the chart graphical display.     

A new approach for monitoring process variance

ABSTRACT

Control charts are effective tools for signal detection in both manufacturing processes and service processes. Much service data come from a process with variables having non-normal or unknown distributions. The commonly used Shewhart variable control charts, which depend heavily on the normality assumption, should not be properly used in such circumstances. In this paper, we propose a new variance chart based on a simple statistic to monitor process variance shifts. We explore the sampling properties of the new monitoring statistic and calculate the average run lengths (ARLs) of the proposed variance chart. Furthermore, an arcsine transformed exponentially weighted moving average (EWMA) chart is proposed because the ARLs of this modified chart are more intuitive and reasonable than those of the variance chart. We compare the out-of-control variance detection performance of the proposed variance chart with that of the non-parametric Mood variance (NP-M) chart with runs rules, developed by Zombade and Ghute [Nonparametric control chart for variability using runs rules. Experiment. 2014;24(4):1683–1691], and the nonparametric likelihood ratio-based distribution-free exponential weighted moving average (NLE) chart and the combination of traditional exponential weighted moving average (EWMA) mean and EWMA variance (CEW) control chart proposed by Zou and Tsung [Likelihood ratio-based distribution-free EWMA control charts. J Qual Technol. 2010;42(2):174–196] by considering cases in which the critical quality characteristic has a normal, a double exponential or a uniform distribution. Comparison results showed that the proposed chart performs better than the NP-M with runs rules, and the NLE and CEW control charts. A numerical example of service times with a right-skewed distribution from a service system of a bank branch in Taiwan is used to illustrate the application of the proposed variance chart and of the arcsine transformed EWMA chart and to compare them with three existing variance (or standard deviation) charts. The proposed charts show better detection performance than those three existing variance charts in monitoring and detecting shifts in the process variance.     

Variable repetitive group sampling plans with process loss consideration

Traditionally, most acceptance sampling plans considering the fraction defective do not distinguish among the products that fall within the specification limits. However, products that fall within the specification limits may not be good if their mean is far away from the target. So, developing an acceptance sampling plan with process loss consideration is essential. In this paper, a variable repetitive group sampling plan is proposed to deal with process loss. The design parameters of the proposed plan are tabulated for various combinations of acceptance quality levels. The proposed methodology can be used to determine whether the products meet the desired levels of protection for both producers and consumers.     

A double exponentially weigiited moving average control procedure with variable sampling intervals

Shewhart, cumulative sum (CUSUM), and exponentially weighted moving average (EWMA) control procedures with variable sampling intervals (VSI) have been investigated in recent years for detecting shifts in the process mean. Such procedures have been shown to be more efficient when compared with the corresponding fixed sampling interval (FSI) charts with respect to the average time to signal (ATS) when the average run length (ARL) values of both types of procedures are held equal. Frequent switching between the different sampling intervals can be a complicating factor in the application of control charts with variable sampling intervals. In this article, we propose using a double exponentially weighted moving average control procedure with variable sampling intervals (VSI-DEWMA) for detecting shifts in the process mean. It is shown that the proposed VSI-DEWMA control procedure is more efficient when compared with the corresponding fixed sampling interval FSI-DEWMA chart with respect to the average time to signal (ATS) when the average run length (ARL) values of both types of procedures are held equal. It is also shown that the VSI-DEWMA procedure reduces the average number of switches between the sampling intervals and has similar ATS properties as compared to the VSI-EMTMA control procedure     

A Multivariate Synthetic Control Chart for Monitoring the Process Mean Vector of Skewed Populations Using Weighted Standard Deviations

This article proposes a multivariate synthetic control chart for skewed populations based on the weighted standard deviation method. The proposed chart incorporates the weighted standard deviation method into the standard multivariate synthetic control chart. The standard multivariate synthetic chart consists of the Hotelling's T ² chart and the conforming run length chart. The weighted standard deviation method adjusts the variance–covariance matrix of the quality characteristics and approximates the probability density function using several multivariate normal distributions. The proposed chart reduces to the standard multivariate synthetic chart when the underlying distribution is symmetric. In general, the simulation results show that the proposed chart performs better than the existing multivariate charts for skewed populations and the standard T ² chart, in terms of false alarm rates as well as moderate and large mean shift detection rates based on the various degrees of skewnesses.     

Optimal Variable Sample Size and Sampling Interval MSE Chart Based on Improved Square Root Transformation

In the field of statistical process control (SPC), control charts for attributes are widely used to detect the out-of-control condition by checking the number of nondefective units or nondefective in a sample. In this article, we use the average time to signal (ATS) and the average number of observations to signal (ANOS) to evaluate the performance of the optimal variable sample size and sampling interval (VSSI) improved square root transformation (ISRT) mean square error (MSE) (VSSI_ ISRT_ MSE) control chart for attribute data. In addition, this control chart will be used to monitor: (1) the difference between the process mean and the target value, and (2) the process variance shifts. We found that the optimal VSSI_ ISRT_ MSE chart performs better than the specific VSSI, the optimal variable sampling interval (VSI), and the fixed parameters (FP) ISRT_MSE charts. An example is given to illustrate this new proposed approach.     

Robustness of the EWMA and the combined X¯–EWMA control charts with variable sampling intervals to non-normality

The exponentially weighted moving average (EWMA) control charts with variable sampling intervals (VSIs) have been shown to be substantially quicker than the fixed sampling intervals (FSI) EWMA control charts in detecting process mean shifts. The usual assumption for designing a control chart is that the data or measurements are normally distributed. However, this assumption may not be true for some processes. In the present paper, the performances of the EWMA and combined X¯–EWMA control charts with VSIs are evaluated under non-normality. It is shown that adding the VSI feature to the EWMA control charts results in very substantial decreases in the expected time to detect shifts in process mean under both normality and non-normality. However, the combined X¯–EWMA chart has its false alarm rate and its detection ability is affected if the process data are not normally distributed.     

Two-Stage Variables Acceptance Sampling Plans Using Process Loss Functions

In this article, a variable two-stage acceptance sampling plan is developed when the quality characteristic is evaluated through a process loss function. The plan parameters of the proposed plan are determined by using the two-point approach and tabulated according to various quality levels. Two cases are discussed when the process mean lies at the target value and when it does not, respectively. Extensive tables are provided for both cases and the results are explained with examples. The advantage of the proposed plan is compared with the existing variable single acceptance sampling plan using the process loss function.     

A control chart using an auxiliary variable and repetitive sampling for monitoring process mean

In this paper, a new control chart is proposed by using an auxiliary variable and repetitive sampling in order to enhance the performance of detecting a shift in process mean. The product-difference type estimator of the mean is plotted on the proposed control chart, which utilizes the information of an auxiliary variable correlated with the main quality variable. The proposed control chart is based on the outer and inner control limits so that repetitive sampling is allowed when the plotted statistic falls between the two limits. The average run length (ARL) of the proposed control chart is evaluated using the Monte Carlo simulation. The proposed control chart is compared with the Riaz M control chart and the results show the outperformance of the proposed control chart in terms of the ARL.     

An Extension of Economic Design of x-Bar Control Charts for Non Normally Distributed Data Under Weibull Shock Models

Three parameters—sample size, sampling intervals, and the control limits—must be determined when the x bar chart to monitor a manufacturing process. The constant sampling intervals were widely employed because of its administrative simplicity. However, the variable sampling interval (VSI) has recently been shown to give substantially faster detection of most process shifts than fixed-sampling-interval (FSI) for x-bar charts. In addition, these measurements in the subgroup are assumed to be normally distributed. That assumption may not be tenable. This investigation compares the economic design of x-bar control charts for non normal data under Weibull shock models with various sampling avenues.     

A EWMA control chart based on an auxiliary variable and repetitive sampling for monitoring process location

ABSTRACT

This article develops an exponentially weighted moving average (EWMA) control chart using an auxiliary variable and repetitive sampling for efficient detection of small to moderate shifts in location. A EWMA statistic of a product estimator of the average (which utilities the information of auxiliary variables as well as repetitive sampling) is plotted on the proposed chart. The control chart coefficients of the proposed EWMA chart are determined for two strategic limits known as outer and inner control limits for the target in-control average run length. The performance of the proposed EWMA chart is studied using average run length when a shift occurs in the process average. The efficiency of the developed chart is compared with the competitive existing control charts. The results of the study revealed that proposed EWMA chart is more efficient than others to detect small changes in process mean.     

Hotelling’s T2 control chart with double warning lines

Recent studies have shown that the T ² control chart with variable sampling intervals (VSI) and/or variable sample sizes (VSS) detects process shifts faster than the traditional T ² chart. This article extends these studies for processes that are monitored with VSI and VSS using double warning lines (T ² —DWL). It is assumed that the length of time the process remains in control has exponential distribution. The properties of T ² —DWL chart are obtained using Markov chains. The results show that the T ² —DWL chart is quicker than VSI and/or VSS charts in detecting almost all shifts in the process mean.