Quantile inference for heteroscedastic regression models

Consider the nonparametric heteroscedastic regression model Y=m(X)+σ(X)?, where m(·) is an unknown conditional mean function and σ(·) is an unknown conditional scale function. In this paper, the limit distribution of the quantile estimate for the scale function σ(X) is derived. Since the limit distribution depends on the unknown density of the errors, an empirical likelihood ratio statistic based on quantile estimator is proposed. This statistics is used to construct confidence intervals for the variance function. Under certain regularity conditions, it is shown that the quantile estimate of the scale function converges to a Brownian motion and the empirical likelihood ratio statistic converges to a chi-squared random variable. Simulation results demonstrate the superiority of the proposed method over the least squares procedure when the underlying errors have heavy tails.     

Statistical inference on partial linear additive models with distortion measurement errors

We consider statistical inference for partial linear additive models (PLAMs) when the linear covariates are measured with errors and distorted by unknown functions of commonly observable confounding variables. A semiparametric profile least squares estimation procedure is proposed to estimate unknown parameter under unrestricted and restricted conditions. Asymptotic properties for the estimators are established. To test a hypothesis on the parametric components, a test statistic based on the difference between the residual sums of squares under the null and alternative hypotheses is proposed, and we further show that its limiting distribution is a weighted sum of independent standard chi-squared distributions. A bootstrap procedure is further proposed to calculate critical values. Simulation studies are conducted to demonstrate the performance of the proposed procedure and a real example is analyzed for an illustration.     

Quantile regression in longitudinal studies with dropouts and measurement errors

ABSTRACT

Quantile regression models, as an important tool in practice, can describe effects of risk factors on the entire conditional distribution of the response variable with its estimates robust to outliers. However, there is few discussion on quantile regression for longitudinal data with both missing responses and measurement errors, which are commonly seen in practice. We develop a weighted and bias-corrected quantile loss function for the quantile regression with longitudinal data, which allows both missingness and measurement errors. Additionally, we establish the asymptotic properties of the proposed estimator. Simulation studies demonstrate the expected performance in correcting the bias resulted from missingness and measurement errors. Finally, we investigate the Lifestyle Education for Activity and Nutrition study and confirm the effective of intervention in producing weight loss after nine month at the high quantile.     

Nonlinear regression models with general distortion measurement errors

This paper considers nonlinear regression models when neither the response variable nor the covariates can be directly observed, but are measured with both multiplicative and additive distortion measurement errors. We propose conditional variance and conditional mean calibration estimation methods for the unobserved variables, then a nonlinear least squares estimator is proposed. For the hypothesis testing of parameter, a restricted estimator under the null hypothesis and a test statistic are proposed. The asymptotic properties for the estimator and test statistic are established. Lastly, a residual-based empirical process test statistic marked by proper functions of the regressors is proposed for the model checking problem. We further suggest a bootstrap procedure to calculate critical values. Simulation studies demonstrate the performance of the proposed procedure and a real example is analysed to illustrate its practical usage.     

Quantity quantiles linear regression

We show that the definition of the θth sample quantile as the solution to a minimization problem introduced by Koenker and Bassett (Econometrica 46(1):33–50, 1978) can be easily extended to obtain an analogous definition for the θth sample quantity quantile widely investigated and applied in the Italian literature. The key point is the use of the first-moment distribution of the variable instead of its distribution function. By means of this definition we introduce a linear regression model for quantity quantiles and analyze some properties of the residuals. In Sect. 4 we show a brief application of the methodology proposed. This research was partially supported by Fondo d’Ateneo per la Ricerca anno 2005—Università degli Studi di Milano-Bicocca. The paper is the result of the common work of the authors; in particular M. Zenga has written Sects. 1 and 5 while P. Radaelli has written the remaining sections.     

Quantile regression in functional linear semiparametric model

This paper proposes nonparametric estimation methods for functional linear semiparametric quantile regression, where the conditional quantile of the scalar responses is modelled by both scalar and functional covariates and an additional unknown nonparametric function term. The slope function is estimated using the functional principal component basis and the nonparametric function is approximated by a piecewise polynomial function. The asymptotic distribution of the estimators of slope parameters is derived and the global convergence rate of the quantile estimator of unknown slope function is established under suitable norm. The asymptotic distribution of the estimator of the unknown nonparametric function is also established. Simulation studies are conducted to investigate the finite-sample performance of the proposed estimators. The proposed methodology is demonstrated by analysing a real data from ADHD-200 sample.     

Weighted local linear composite quantile estimation for the case of general error distributions

It is known that for nonparametric regression, local linear composite quantile regression (local linear CQR) is a more competitive technique than classical local linear regression since it can significantly improve estimation efficiency under a class of non-normal and symmetric error distributions. However, this method only applies to symmetric errors because, without symmetric condition, the estimation bias is non-negligible and therefore the resulting estimator is inconsistent. In this paper, we propose a weighted local linear CQR method for general error conditions. This method applies to both symmetric and asymmetric random errors. Because of the use of weights, the estimation bias is eliminated asymptotically and the asymptotic normality is established. Furthermore, by minimizing asymptotic variance, the optimal weights are computed and consequently the optimal estimate (the most efficient estimate) is obtained. By comparing relative efficiency theoretically or numerically, we can ensure that the new estimation outperforms the local linear CQR estimation. Finite sample behaviors conducted by simulation studies further illustrate the theoretical findings.     

Quantile regression for interval censored data

As direct generalization of the quantile regression for complete observed data, an estimation method for quantile regression models with interval censored data is proposed, and the property of consistency is obtained. The property of asymptotic normality is also established with a bias converging to zero, and to reduce the bias, two bias correction methods are proposed. Methods proposed in this paper do not require the censoring vectors to be identically distributed, and can be applied to models with various covariates. Simulation results show that the proposed methods work well.     

Composite quantile regression for varying-coefficient single-index models

ABSTRACT

The varying-coefficient single-index model (VCSIM) is a very general and flexible tool for exploring the relationship between a response variable and a set of predictors. Popular special cases include single-index models and varying-coefficient models. In order to estimate the index-coefficient and the non parametric varying-coefficients in the VCSIM, we propose a two-stage composite quantile regression estimation procedure, which integrates the local linear smoothing method and the information of quantile regressions at a number of conditional quantiles of the response variable. We establish the asymptotic properties of the proposed estimators for the index-coefficient and varying-coefficients when the error is heterogeneous. When compared with the existing mean-regression-based estimation method, our simulation results indicate that our proposed method has comparable performance for normal error and is more robust for error with outliers or heavy tail. We illustrate our methodologies with a real example.     

Modified check loss for efficient estimation via model selection in quantile regression

The check loss function is used to define quantile regression. In cross-validation, it is also employed as a validation function when the true distribution is unknown. However, our empirical study indicates that validation with the check loss often leads to overfitting the data. In this work, we suggest a modified or L2-adjusted check loss which rounds the sharp corner in the middle of check loss. This has the effect of guarding against overfitting to some extent. The adjustment is devised to shrink to zero as sample size grows. Through various simulation settings of linear and nonlinear regressions, the improvement due to modification of the check loss by quadratic adjustment is examined empirically.     

Quantile regression methods for left-truncated and right-censored data

Left-truncated and right-censored (LTRC) data are encountered frequently due to a prevalent cohort sampling in follow-up studies. Because of the skewness of the distribution of survival time, quantile regression is a useful alternative to the Cox's proportional hazards model and the accelerated failure time model for survival analysis. In this paper, we apply the quantile regression model to LTRC data and develops an unbiased estimating equation for regression coefficients. The proposed estimation methods use the inverse probabilities of truncation and censoring weighting technique. The resulting estimator is uniformly consistent and asymptotically normal. The finite-sample performance of the proposed estimation methods is also evaluated using extensive simulation studies. Finally, analysis of real data is presented to illustrate our proposed estimation methods.     

Quantile regression for robust estimation and variable selection in partially linear varying-coefficient models

In this paper, we develop a new estimation procedure based on quantile regression for semiparametric partially linear varying-coefficient models. The proposed estimation approach is empirically shown to be much more efficient than the popular least squares estimation method for non-normal error distributions, and almost not lose any efficiency for normal errors. Asymptotic normalities of the proposed estimators for both the parametric and nonparametric parts are established. To achieve sparsity when there exist irrelevant variables in the model, two variable selection procedures based on adaptive penalty are developed to select important parametric covariates as well as significant nonparametric functions. Moreover, both these two variable selection procedures are demonstrated to enjoy the oracle property under some regularity conditions. Some Monte Carlo simulations are conducted to assess the finite sample performance of the proposed estimators, and a real-data example is used to illustrate the application of the proposed methods.     

Quantile regression estimation of partially linear additive models

In this paper, we consider the estimation of partially linear additive quantile regression models where the conditional quantile function comprises a linear parametric component and a nonparametric additive component. We propose a two-step estimation approach: in the first step, we approximate the conditional quantile function using a series estimation method. In the second step, the nonparametric additive component is recovered using either a local polynomial estimator or a weighted Nadaraya–Watson estimator. Both consistency and asymptotic normality of the proposed estimators are established. Particularly, we show that the first-stage estimator for the finite-dimensional parameters attains the semiparametric efficiency bound under homoskedasticity, and that the second-stage estimators for the nonparametric additive component have an oracle efficiency property. Monte Carlo experiments are conducted to assess the finite sample performance of the proposed estimators. An application to a real data set is also illustrated.     

Quantile regression for large-scale data via sparse exponential transform method

In recent decades, quantile regression has received much more attention from academics and practitioners. However, most of existing computational algorithms are only effective for small or moderate size problems. They cannot solve quantile regression with large-scale data reliably and efficiently. To this end, we propose a new algorithm to implement quantile regression on large-scale data using the sparse exponential transform (SET) method. This algorithm mainly constructs a well-conditioned basis and a sampling matrix to reduce the number of observations. It then solves a quantile regression problem on this reduced matrix and obtains an approximate solution. Through simulation studies and empirical analysis of a 5% sample of the US 2000 Census data, we demonstrate efficiency of the SET-based algorithm. Numerical results indicate that our new algorithm is effective in terms of computation time and performs well for large-scale quantile regression.     

SIMEX method for censored quantile regression with measurement error

Censored quantile regression serves as an important supplement to the Cox proportional hazards model in survival analysis. In addition to being exposed to censoring, some covariates may subject to measurement error. This leads to substantially biased estimate without taking this error into account. The SIMulation-EXtrapolation (SIMEX) method is an effective tool to handle the measurement error issue. We extend the SIMEX approach to the censored quantile regression with covariate measurement error. The algorithm is assessed via extensive simulations. A lung cancer study is analyzed to verify the validation of the proposed method.     

Consistent estimation approach to tackling collinearity and Berkson-type measurement error in linear regression using adjusted Wald-type estimator

This article proposes a consistent estimation approach in linear regression models for the case when the predictor variables are subject to collinearities and Berkson-type measurement errors simultaneously. Our presented procedure does not rely on ridge regression (RR) methods that have been widely addressed in the literature for ill-conditioned problems resulted from multicollinearity. Instead, we review and propose new consistent estimators due to Wald (1940 Wald, A. (1940). Fitting of straight lines if both variables are subject to error. Ann. Math. Stat. 11:284–300.[Crossref] , [Google Scholar]) so that, except finite fourth moments assumptions, no prior knowledge of parametric settings on observations and errors is used, and there is no need to solve estimating equations for coefficient parameters. The performance of the estimation procedure is compared with that of RR-based estimators by using a variety of numerical experiments through Monte Carlo simulation under estimated mean squared error (EMSE) criterion.     

Randomized quantile regression estimation for heteroskedastic non parametric model

In this paper, we propose robust randomized quantile regression estimators for the mean and (condition) variance functions of the popular heteroskedastic non parametric regression model. Unlike classical approaches which consider quantile as a fixed quantity, our method treats quantile as a uniformly distributed random variable. Our proposed method can be employed to estimate the error distribution, which could significantly improve prediction results. An automatic bandwidth selection scheme will be discussed. Asymptotic properties and relative efficiencies of the proposed estimators are investigated. Our empirical results show that the proposed estimators work well even for random errors with infinite variances. Various numerical simulations and two real data examples are used to demonstrate our methodologies.     

Local composite quantile regression estimation of time-varying parameter vector for multidimensional time-inhomogeneous diffusion models

This paper is dedicated to the study of the composite quantile regression (CQR) estimations of time-varying parameter vectors for multidimensional diffusion models. Based on the local linear fitting for parameter vectors, we propose the local linear CQR estimations of the drift parameter vectors, and verify their asymptotic biases, asymptotic variances and asymptotic normality. Moreover, we discuss the asymptotic relative efficiency (ARE) of the local linear CQR estimations with respect to the local linear least-squares estimations. We obtain that the local estimations that we proposed are much more efficient than the local linear least-squares estimations. Simulation studies are constructed to show the performance of the estimations proposed.     

Correlation curve estimation for multiplicative distortion measurement errors data

A correlation curve measures the strength of the association between two variables locally at different values of covariate. This paper studies how to estimate the correlation curve under the multiplicative distortion measurement errors setting. The unobservable variables are both distorted in a multiplicative fashion by an observed confounding variable. We obtain asymptotic normality results for the estimated correlation curve. We conduct Monte Carlo simulation experiments to examine the performance of the proposed estimator. The estimated correlation curve is applied to analyze a real dataset for an illustration.     

Quantile regression for panel data models with fixed effects under random censoring

Abstract

The locally weighted censored quantile regression approach is proposed for panel data models with fixed effects, which allows for random censoring. The resulting estimators are obtained by employing the fixed effects quantile regression method. The weights are selected either parametrically, semi-parametrically or non-parametrically. The large panel data asymptotics are used in an attempt to cope with the incidental parameter problem. The consistency and limiting distribution of the proposed estimator are also derived. The finite sample performance of the proposed estimators are examined via Monte Carlo simulations.