Ergonomic tridimensional analysis: critical ergonomic factors identification in a commercial environmental

The Ergonomic tridimensional analysis (ETdA) was developed to be used as an auxiliary tool on the ergonomic intervention. It was specially designed for commercial areas with free circulation of people. Due to that, the client, the third ETdA dimension, becomes an important element and their opinions relevant in the ergonomic analysis. The remains two ETdA dimensions, professionals and analyst, play an identical role as in the traditional occupational ergonomic analysis. For each of these dimensions, specific observation tools were assembled: an ETdA questionnaire, an evaluation form and a checklist for direct and indirect observations. The variables that allow the ETdA operability are identified as Ergonomic Factors (EFs). A case study is presented identifying, for each dimension, the critical EFs. This will allow the design of the weighting table, where the influence of each dimensions results is measured, stressing the important role of clients on ergonomic issues.     

Analysis of the implementation of ergonomic design at the new units of an oil refinery

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.     

Computer environments for children: a review of design issues

Ergonomic design considerations for computer use in schools are reviewed. Evidence for the postural effects of ergonomic furniture from worldwide studies is evaluated. Issues of furniture sizing and allocation methods are discussed. The limited evidence for effects of input device design on schoolchildren is summarized. Future directions for ergonomic research studies are presented.     

Evaluation of selected ergonomic assessment tools for use in providing job accommodation for people with inflammatory arthritis

Inflammatory arthritis (IA) is a leading cause of work disability, especially for those with jobs involving repetitive, hand-intensive or manual work. Ergonomic interventions may mediate against job loss. Our objective was to identify desirable features of an ergonomic tool for use in providing job accommodation for people with IA, and to evaluate a selection of ergonomic and rehabilitation tools against these features. Eight desirable features were compared across 16 assessment tools. None of the tools met all the pre-determined features. Ergonomic assessment tools should incorporate objective assessment of risk factors together with subjective perceptions of symptom aggravation, and identify risk factors that may not currently be causing problems, but may increase risk of aggravation or injury in the future. To accommodate the needs of people with IA, the tool should allow for evaluation of risks and generation of solutions without a worksite visit in situations where the client does not want to disclose their illness. Finally, an assessment tool needs to be applicable to a wide range of worksites, easy to use, valid, and reliable. Against these criteria, it appears that there is a lack of appropriate ergonomic assessment tools for use in people with IA.     

Software development for the evaluation of the ergonomic compatibility on the selection of advanced manufacturing technology

Advanced Manufacturing Technology (AMT) is one of the most relevant resources that companies have to achieve competitiveness and best performance. The selection of AMT is a complex problem which involves significant amount of information and uncertainty when multiple aspects must be taken into consideration. Actual models for the selection of AMT are found scarce of the Human Factors and Ergonomics perspective which can lead to a more complete and reliable decision. This paper presents the development of software that enhances the application of an Ergonomic Compatibility Evaluation Model that supports decision making processes taking into consideration ergonomic attributes of designs. Ergonomic Compatibility is a construct used in this model and it is mainly based in the concept of human-artifact compatibility on human compatible systems. Also, an Axiomatic Design approach by the use of the Information Axiom was evolved under a fuzzy environment to obtain the Ergonomic Incompatibility Content. The extension of this axiom for the evaluation of ergonomic compatibility requirements was the theoretical framework of this research. An incremental methodology of four stages was used to design and develop the software that enables to compare AMT alternatives by the evaluation of Ergonomic Compatibility Attributes.     

Ergonomic work analysis as a tool of prevention for the occupational safety and health management system

This paper introduces the Ergonomic Work Analysis as a relevant instrument to identify the risks in occupational environments through the investigation of factors that influence the relationship between the worker and the productive process. It draws a parallel between the several aspects of risk identification in traditional tools of Health and Safety Management and the factors embraced by the Ergonomic Work Analysis, showing that the ergonomic methodology is able to go deeper in the scenarios of possible incident causes. This deepening enables the establishment of a relationship between the work context and the upcoming damage to the physical integrity of the worker. It acts as a complementary instrument in the traditional approach to the risk management. In order to explain the application of this methodology in a preventive way, it is presented a case study of a coal mill inspector in a siderurgic company.     

Design and implementation of ergonomic performance measurement system at a steel plant in India

Management of Tata Steel, the largest steel making company of India in the private sector, felt the need to develop a framework to determine the levels of ergonomic performance at its different workplaces. The objectives of the study are manifold: to identify and characterize the ergonomic variables for a given worksystem with regard to work efficiency, operator safety, and working conditions, to design a comprehensive Ergonomic Performance Indicator (EPI) for quantitative determination of the ergonomic status and maturity of a given worksystem. The study team of IIT Kharagpur consists of three faculty members and the management of Tata Steel formed a team of eleven members for implementation of EPI model. In order to design and develop the EPI model with total participation and understanding of the concerned personnel of Tata Steel, a three-phase action plan for the project was prepared. The project consists of three phases: preparation and data collection, detailed structuring and validation of EPI model. Identification of ergonomic performance factors, development of interaction matrix, design of assessment tool, and testing and validation of assessment tool (EPI) in varied situations are the major steps in these phases. The case study discusses in detail the EPI model and its applications.     

Contribution of mental workload to job stress in industrial workers

This study's central objective is to determine how several individual, organizational and ergonomic factors influence the relationship between job stress and mental workload for workers in an electronics company. A cross-sectional study was made as a test of hypotheses regarding that relationship. The sample is composed of 95 workers, of both sexes, from the electronics industry in the metropolitan zone of Guadalajara, Jalisco, Mexico. Ergonomic conditions were evaluated with the Ergonomic Evaluation List, stress was evaluated by administering the SWS-Survey to groups of subjects, and mental workload was evaluated with the NASA-TLX Workload Index. Using Cochran's and Mantel-Haenzsel statistics, the odds ratio for each of the independent variables was {e}stimated as a risk factor for job stress, and analysis was later conducted by means of logistic regression for those risks found to be significant. Of the 95 worker participants, 26.3% presented a high level of job stress and 17.9% of the workers were found to present high levels of mental workload. The results show that working hours, mental demand, temporal demand, and frustration when faced with a given task may be considered risk factors for job stress.     

Ergonomic work analysis of urban bus drivers in Rio de Janeiro city

This article is the result of a case study on ergonomic work analysis carried out in an urban bus company located in Ilha do Governador, Rio de Janeiro. The methodology used in this work follows the French-tradition Ergonomic Analysis of the Work (EWA) combined with the best tradition from anglo-saxon ergonomic work analysis. The situated diagnosis was performed to provide relevant information about the work conditions of a bus driver.     

The PhOCoe Model--ergonomic pattern mapping in participatory design processes

The discipline and practice of human factors and ergonomics is quite rich in terms of the availability of analysis, development and evaluation tools and methods for its various processes. However, we lack effective instruments to either map or regulate comprehensively and effectively, cognitive and organizational related impacts, especially the environmental ones. Moreover, when ergonomic transformations through design - such as a new workstation design or even an entire new facility - is at play, ergonomics professionals tend to stay at bay, relying solely on design professionals and engineers. There is vast empirical evidence showing that participation of ergonomists as project facilitators, may contribute to an effective professional synergy amongst the various stakeholders in a multidisciplinary venue. When that happens, everyone wins - users and designers alike -because eventual conflicts, raised up in the midst of options selection, are dissipated in exchange for more convergent design alternatives. This paper presents a method for participatory design, in which users are encouraged to actively participate in the whole design process by sharing their real work activities with the design team. The negotiated results inferred from the ergonomic action and translated into a new design, are then compiled into a "Ergonomic Pattern Manual". This handbook of ergonomics-oriented design guidelines contains essential guidelines to be consulted in recurrent design project situations in which similar patterns might be used. The main drive is simple: nobody knows better than workers themselves what an adequate workplace design solution (equipment, workstation, office layout) should be.     

Body postures versus production requirements - the case of a fiberglass parts factory

This study aimed to perform an ergonomic analysis in a fiberglass parts factory. For this purpose, was used the methodology of Ergonomic Work Analysis (EWA). At the end of the study it was possible to identify some ways to the development of improvements in order to contribute to the transformation of working conditions in the sector analyzed.     

Ergonomics analyses of five joineries located in Florianópolis-SC, using the LEST Method

Considering the goal of Ergonomic Work Analysis to establish, from the point of view of workers, safe, healthy, comfortable and efficient environments, this study propose to analyze the work situation of machine operators at five joineries from Florianópolis-SC. For this, it was applied the LEST Method to evaluate the task made by the operators, considering the physical, cognitive and organizational work environment. As results, it was identified the main ergonomics problems of these workstations, presenting an ergonomic diagnosis and their implications on health and safety of workers. As result, it was concluded that the main ergonomics problems at joineries are related with noise, with constant load of weight and with the postures taken. Besides these problems, others were diagnosed, for example, the pressure for workers to comply strictly the task stipulated and also the poor training and capacity of workers.     

Study of musculoskeletal risks of the office-based surgeries

Due to the cost and time benefits associated with patients and physicians, outpatient surgeries continue to become more and more popular over time. With the increase in the number of office-based surgical procedures, the prevalence of work-related musculoskeletal disorders (WMSDs) associated with office-based surgeries has been reported. The purpose of this pilot study is to ergonomically evaluate the risk of work-related musculoskeletal disorders of physicians/surgeons performing office-based surgery (OBS). Ergonomic assessment tools included Questionnaire, the BodyMap and the Rapid Upper Limb Assessment for measuring potential ergonomic concerns. The findings have shown that the ergonomic issues of greatest concerns were the discomforts in the neck, shoulders, arms/wrists, and back. Some additional comments were provided by the participants regarding the duration of discomfort or clarification on the frequency of their body discomfort. This study suggests that there is a considerable risk of musculoskeletal injuries of physicians/surgeons performing the OBS tasks. By properly using the ergonomic assessment techniques, valuable information on ergonomic OBS workplace design and selection could assist in the early interventions of WMSD prevention.     

Workers' postural conditions in the charcoal production proccess based on vertical metallic cylynders

Considering the importance of posture to the workers' health in the production of charcoal, this paper presents an ergonomic research based on a biomechanical focus that aims to evaluate the posture adopted by these workers on the production of charcoal in vertical metallic cylinders. Thus, it was verified the incidence of pain and/or musculoskeletal injuries to these workers. Also, it was evaluated the weight carried by them and the positions taken in their daily tasks. Applying the Ergonomic Analysis of Labor, the data collection was done by directly observing the workers, registering images, by interviews, and posture analysis based on the OWAS method. The main results of the research show that there are postures with risks in the four levels of musculoskeletal injuries classified by OWAS, concluding that the method is imperative for ergonomic recommendations for minimization or eradication of suffering injury and worker's postural constraints.     

Ergonomic adequacy of the baby nursery of child development center located in UFSC - Florianópolis

A study in the educators' work station at baby nursery of NDI/UFSC, located in Florianópolis, was conducted using the Work Ergonomic Analysis methodological tool. The demand considered was the educators' physical exhaustion caused by the weight carried when taking care of the babies, the postures assumed during the labor activity and the spatial arrangement of the baby nursery. Thinking ergonomically, the spatial arrangement is directly associated to three factors: the formal aspect of the environment, the esthetic aspect including colors and finish quality and the ease of understanding involved in the baby nursery labor. By the ergonomic adequacy it is possible to assert that if were established better conditions of posture and comfort for the educators, as well as satisfactory technical and operational information to carry out the activities, greater safety and welfare would be provided to the babies, the main focus of the work.     

Health behavior change among office workers: an exploratory study to prevent repetitive strain injuries

The purpose of this evidence-based study is to investigate the impact of a multi-component intervention on health behavior change among office/computer workers in preventing repetitive strain injuries. Forty office workers employed in an administrative office in Michigan participated in this project. The subjects completed a comprehensive questionnaire at three different times in 1994 and 1995. The intervention took place between time 2 and time 3 and included posters, e-mail tips, mini-workshops, and activities of a Wellness Ergonomic Team. A theoretical model was tested to identify factors influencing healthy behaviors. Study findings revealed positive behavior change for 62% of the participants. The factors most strongly related to health behavior change appear to be self-efficacy, the intention to change one's behavior, and perceived health status. Better understanding of health behavior change coupled with ergonomic modifications is a significant step toward the prevention of repetitive strain injuries resulting from computer use.     

Toward a transdisciplinary approach of ergonomic design for sustainability

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.     

Ergonomic assessment among radiology technologists: a survey in a hospital

This article is the result of an Ergonomic Diagnosis in a study for a Specialization Course in Ergonomics. The research is being done in a public hospital in the city of Rio de Janeiro, where the target system is the radiology sector. For diagnosis purposes, subjective techniques were used, such as an open-ended survey, Corlett questionnaire and techniques for evaluating ergonomic risk such as Owas and Rula. Systematic observation was emphasized using photos and films. Preliminary observations made to the radiographers found that these professionals suffer risks of physical and verbal harassment, as well as sexual harassment. Most of them feel discriminated against in terms of race and accumulate activities demanding a lot of attention, as the medical diagnosis and subsequent procedures will depend on the outcome of this task. They accumulate tension due to the weight of responsibility, since there are cases where the patient has risk of death.     

The construction of ergonomic demands: application on artisan fishing using jangada fishing rafts in the beach of Ponta Negra

The present article seeks the process of construction of ergonomics demand referring to the artisan fishing activityfound in Ponta Negra beach located in the city of Natal, Brazil. The instruction/construction of demands correspond to the first stage of Work Ergonomic Analysis and allows the understanding of real issues existent in a work situation, rank them and route the providences. The demand presented on this study, features itself as a induced demand, process which some potential demands or hypothetical demands are taken to an organization, after a preview analysis of the work aimed by the study, resulting from a theoretical research (state of the art) and/or from analysis of a reference situation (state of practice), where demands hypothesis are taken in consideration about the pretended work. The demands construction process using interactional methods and techniques, observation methods and techniques and bibliographic research, researches in state of reference or document. This article demonstrates the efficiency of the methodological choice to construct real ergonomic demands and highlights the importance of social construction on that process, which main goal is to refer the ergonomic actions that allow the improvement of work and life conditions for the fishers and sustainability to Jangadeira activity.