An investigation into the two‐stage meta‐analytic copula modelling approach for evaluating time‐to‐event surrogate endpoints which comprise of one or more events of interest

Clinical trials of experimental treatments must be designed with primary endpoints that directly measure clinical benefit for patients. In many disease areas, the recognised gold standard primary endpoint can take many years to mature, leading to challenges in the conduct and quality of clinical studies. There is increasing interest in using shorter‐term surrogate endpoints as substitutes for costly long‐term clinical trial endpoints; such surrogates need to be selected according to biological plausibility, as well as the ability to reliably predict the unobserved treatment effect on the long‐term endpoint. A number of statistical methods to evaluate this prediction have been proposed; this paper uses a simulation study to explore one such method in the context of time‐to‐event surrogates for a time‐to‐event true endpoint. This two‐stage meta‐analytic copula method has been extensively studied for time‐to‐event surrogate endpoints with one event of interest, but thus far has not been explored for the assessment of surrogates which have multiple events of interest, such as those incorporating information directly from the true clinical endpoint. We assess the sensitivity of the method to various factors including strength of association between endpoints, the quantity of data available, and the effect of censoring. In particular, we consider scenarios where there exist very little data on which to assess surrogacy. Results show that the two‐stage meta‐analytic copula method performs well under certain circumstances and could be considered useful in practice, but demonstrates limitations that may prevent universal use.     

Nested combination tests with a time‐to‐event endpoint using a short‐term endpoint for design adaptations

Adaptive trial methodology for multiarmed trials and enrichment designs has been extensively discussed in the past. A general principle to construct test procedures that control the family‐wise Type I error rate in the strong sense is based on combination tests within a closed test. Using survival data, a problem arises when using information of patients for adaptive decision making, which are under risk at interim. With the currently available testing procedures, either no testing of hypotheses in interim analyses is possible or there are restrictions on the interim data that can be used in the adaptation decisions as, essentially, only the interim test statistics of the primary endpoint may be used. We propose a general adaptive testing procedure, covering multiarmed and enrichment designs, which does not have these restrictions. An important application are clinical trials, where short‐term surrogate endpoints are used as basis for trial adaptations, and we illustrate how such trials can be designed. We propose statistical models to assess the impact of effect sizes, the correlation structure between the short‐term and the primary endpoint, the sample size, the timing of interim analyses, and the selection rule on the operating characteristics.     

Two‐stage phase II survival trial design

Recently, molecularly targeted agents and immunotherapy have been advanced for the treatment of relapse or refractory cancer patients, where disease progression‐free survival or event‐free survival is often a primary endpoint for the trial design. However, methods to evaluate two‐stage single‐arm phase II trials with a time‐to‐event endpoint are currently processed under an exponential distribution, which limits application of real trial designs. In this paper, we developed an optimal two‐stage design, which is applied to the four commonly used parametric survival distributions. The proposed method has advantages compared with existing methods in that the choice of underlying survival model is more flexible and the power of the study is more adequately addressed. Therefore, the proposed two‐stage design can be routinely used for single‐arm phase II trial designs with a time‐to‐event endpoint as a complement to the commonly used Simon's two‐stage design for the binary outcome.     

Predicting analysis time in events‐driven clinical trials using accumulating time‐to‐event surrogate information

For clinical trials with time‐to‐event endpoints, predicting the accrual of the events of interest with precision is critical in determining the timing of interim and final analyses. For example, overall survival (OS) is often chosen as the primary efficacy endpoint in oncology studies, with planned interim and final analyses at a pre‐specified number of deaths. Often, correlated surrogate information, such as time‐to‐progression (TTP) and progression‐free survival, are also collected as secondary efficacy endpoints. It would be appealing to borrow strength from the surrogate information to improve the precision of the analysis time prediction. Currently available methods in the literature for predicting analysis timings do not consider utilizing the surrogate information. In this article, using OS and TTP as an example, a general parametric model for OS and TTP is proposed, with the assumption that disease progression could change the course of the overall survival. Progression‐free survival, related both to OS and TTP, will be handled separately, as it can be derived from OS and TTP. The authors seek to develop a prediction procedure using a Bayesian method and provide detailed implementation strategies under certain assumptions. Simulations are performed to evaluate the performance of the proposed method. An application to a real study is also provided. Copyright © 2015 John Wiley & Sons, Ltd.     

Adaptive designs for single‐arm phase II trials in oncology

Clinical phase II trials in oncology are conducted to determine whether the activity of a new anticancer treatment is promising enough to merit further investigation. Two‐stage designs are commonly used for this situation to allow for early termination. Designs proposed in the literature so far have the common drawback that the sample sizes for the two stages have to be specified in the protocol and have to be adhered to strictly during the course of the trial. As a consequence, designs that allow a higher extent of flexibility are desirable. In this article, we propose a new adaptive method that allows an arbitrary modification of the sample size of the second stage using the results of the interim analysis or external information while controlling the type I error rate. If the sample size is not changed during the trial, the proposed design shows very similar characteristics to the optimal two‐stage design proposed by Chang et al. (Biometrics 1987; 43:865–874). However, the new design allows the use of mid‐course information for the planning of the second stage, thus meeting practical requirements when performing clinical phase II trials in oncology. Copyright © 2012 John Wiley & Sons, Ltd.     

Type I error rate control in adaptive designs for confirmatory clinical trials with treatment selection at interim

Interest in confirmatory adaptive combined phase II/III studies with treatment selection has increased in the past few years. These studies start comparing several treatments with a control. One (or more) treatment(s) is then selected after the first stage based on the available information at an interim analysis, including interim data from the ongoing trial, external information and expert knowledge. Recruitment continues, but now only for the selected treatment(s) and the control, possibly in combination with a sample size reassessment. The final analysis of the selected treatment(s) includes the patients from both stages and is performed such that the overall Type I error rate is strictly controlled, thus providing confirmatory evidence of efficacy at the final analysis. In this paper we describe two approaches to control the Type I error rate in adaptive designs with sample size reassessment and/or treatment selection. The first method adjusts the critical value using a simulation-based approach, which incorporates the number of patients at an interim analysis, the true response rates, the treatment selection rule, etc. We discuss the underlying assumptions of simulation-based procedures and give several examples where the Type I error rate is not controlled if some of the assumptions are violated. The second method is an adaptive Bonferroni-Holm test procedure based on conditional error rates of the individual treatment-control comparisons. We show that this procedure controls the Type I error rate, even if a deviation from a pre-planned adaptation rule or the time point of such a decision is necessary.     

Improving interim decisions in randomized trials by exploiting information on short‐term endpoints and prognostic baseline covariates

Conditional power calculations are frequently used to guide the decision whether or not to stop a trial for futility or to modify planned sample size. These ignore the information in short‐term endpoints and baseline covariates, and thereby do not make fully efficient use of the information in the data. We therefore propose an interim decision procedure based on the conditional power approach which exploits the information contained in baseline covariates and short‐term endpoints. We will realize this by considering the estimation of the treatment effect at the interim analysis as a missing data problem. This problem is addressed by employing specific prediction models for the long‐term endpoint which enable the incorporation of baseline covariates and multiple short‐term endpoints. We show that the proposed procedure leads to an efficiency gain and a reduced sample size, without compromising the Type I error rate of the procedure, even when the adopted prediction models are misspecified. In particular, implementing our proposal in the conditional power approach enables earlier decisions relative to standard approaches, whilst controlling the probability of an incorrect decision. This time gain results in a lower expected number of recruited patients in case of stopping for futility, such that fewer patients receive the futile regimen. We explain how these methods can be used in adaptive designs with unblinded sample size re‐assessment based on the inverse normal P‐value combination method to control Type I error. We support the proposal by Monte Carlo simulations based on data from a real clinical trial.     

Fitting E(max) models to clinical trial dose-response data

We consider fitting Emax models to the primary endpoint for a parallel group dose–response clinical trial. Such models can be difficult to fit using Maximum Likelihood if the data give little information about the maximum possible response. Consequently, we consider alternative models that can be derived as limiting cases, which can usually be fitted. Furthermore we propose two model selection procedures for choosing between the different models. These model selection procedures are compared with two model selection procedures which have previously been used. In a simulation study we find that the model selection procedure that performs best depends on the underlying true situation. One of the new model selection procedures gives what may be regarded as the most robust of the procedures.     

A structured brain‐wide and genome‐wide association study using ADNI PET images

A multistage variable selection method is introduced for detecting association signals in structured brain‐wide and genome‐wide association studies (brain‐GWAS). Compared to conventional methods that link one voxel to one single nucleotide polymorphism (SNP), our approach is more efficient and powerful in selecting the important signals by integrating anatomic and gene grouping structures in the brain and the genome, respectively. It avoids resorting to a large number of multiple comparisons while effectively controlling the false discoveries. Validity of the proposed approach is demonstrated by both theoretical investigation and numerical simulations. We apply our proposed method to a brain‐GWAS using Alzheimer's Disease Neuroimaging Initiative positron emission tomography (ADNI PET) imaging and genomic data. We confirm previously reported association signals and also uncover several novel SNPs and genes that are either associated with brain glucose metabolism or have their association significantly modified by Alzheimer's disease status.     

CVX‐based algorithms for constructing various optimal regression designs

CVX‐based numerical algorithms are widely and freely available for solving convex optimization problems but their applications to solve optimal design problems are limited. Using the CVX programs in MATLAB, we demonstrate their utility and flexibility over traditional algorithms in statistics for finding different types of optimal approximate designs under a convex criterion for nonlinear models. They are generally fast and easy to implement for any model and any convex optimality criterion. We derive theoretical properties of the algorithms and use them to generate new A‐, c‐, D‐ and E‐optimal designs for various nonlinear models, including multi‐stage and multi‐objective optimal designs. We report properties of the optimal designs and provide sample CVX program codes for some of our examples that users can amend to find tailored optimal designs for their problems. The Canadian Journal of Statistics 47: 374–391; 2019 © 2019 Statistical Society of Canada     

Conditional estimation using prior information in 2‐stage group sequential designs assuming asymptotic normality when the trial terminated early

Two‐stage designs are widely used to determine whether a clinical trial should be terminated early. In such trials, a maximum likelihood estimate is often adopted to describe the difference in efficacy between the experimental and reference treatments; however, this method is known to display conditional bias. To reduce such bias, a conditional mean‐adjusted estimator (CMAE) has been proposed, although the remaining bias may be nonnegligible when a trial is stopped for efficacy at the interim analysis. We propose a new estimator for adjusting the conditional bias of the treatment effect by extending the idea of the CMAE. This estimator is calculated by weighting the maximum likelihood estimate obtained at the interim analysis and the effect size prespecified when calculating the sample size. We evaluate the performance of the proposed estimator through analytical and simulation studies in various settings in which a trial is stopped for efficacy or futility at the interim analysis. We find that the conditional bias of the proposed estimator is smaller than that of the CMAE when the information time at the interim analysis is small. In addition, the mean‐squared error of the proposed estimator is also smaller than that of the CMAE. In conclusion, we recommend the use of the proposed estimator for trials that are terminated early for efficacy or futility.     

Decision‐making in drug development using a composite definition of success

Evidence‐based quantitative methodologies have been proposed to inform decision‐making in drug development, such as metrics to make go/no‐go decisions or predictions of success, identified with statistical significance of future clinical trials. While these methodologies appropriately address some critical questions on the potential of a drug, they either consider the past evidence without predicting the outcome of the future trials or focus only on efficacy, failing to account for the multifaceted aspects of a successful drug development. As quantitative benefit‐risk assessments could enhance decision‐making, we propose a more comprehensive approach using a composite definition of success based not only on the statistical significance of the treatment effect on the primary endpoint but also on its clinical relevance and on a favorable benefit‐risk balance in the next pivotal studies. For one drug, we can thus study several development strategies before starting the pivotal trials by comparing their predictive probability of success. The predictions are based on the available evidence from the previous trials, to which new hypotheses on the future development could be added. The resulting predictive probability of composite success provides a useful summary to support the discussions of the decision‐makers. We present a fictive, but realistic, example in major depressive disorder inspired by a real decision‐making case.     

Multivariate two‐sample permutation tests for trials with multiple time‐to‐event outcomes

Clinical trials involving multiple time‐to‐event outcomes are increasingly common. In this paper, permutation tests for testing for group differences in multivariate time‐to‐event data are proposed. Unlike other two‐sample tests for multivariate survival data, the proposed tests attain the nominal type I error rate. A simulation study shows that the proposed tests outperform their competitors when the degree of censored observations is sufficiently high. When the degree of censoring is low, it is seen that naive tests such as Hotelling's T² outperform tests tailored to survival data. Computational and practical aspects of the proposed tests are discussed, and their use is illustrated by analyses of three publicly available datasets. Implementations of the proposed tests are available in an accompanying R package.     

Accounting for uncertainty in the historical response rate of the standard treatment in single‐arm two‐stage designs based on Bayesian power functions

In phase II single‐arm studies, the response rate of the experimental treatment is typically compared with a fixed target value that should ideally represent the true response rate for the standard of care therapy. Generally, this target value is estimated through previous data, but the inherent variability in the historical response rate is not taken into account. In this paper, we present a Bayesian procedure to construct single‐arm two‐stage designs that allows to incorporate uncertainty in the response rate of the standard treatment. In both stages, the sample size determination criterion is based on the concepts of conditional and predictive Bayesian power functions. Different kinds of prior distributions, which play different roles in the designs, are introduced, and some guidelines for their elicitation are described. Finally, some numerical results about the performance of the designs are provided and a real data example is illustrated. Copyright © 2016 John Wiley & Sons, Ltd.     

New estimation and feature selection methods in mixture‐of‐experts models

We study estimation and feature selection problems in mixture‐of‐experts models. An $l_2$ ‐penalized maximum likelihood estimator is proposed as an alternative to the ordinary maximum likelihood estimator. The estimator is particularly advantageous when fitting a mixture‐of‐experts model to data with many correlated features. It is shown that the proposed estimator is root‐$n$ consistent, and simulations show its superior finite sample behaviour compared to that of the maximum likelihood estimator. For feature selection, two extra penalty functions are applied to the $l_2$ ‐penalized log‐likelihood function. The proposed feature selection method is computationally much more efficient than the popular all‐subset selection methods. Theoretically it is shown that the method is consistent in feature selection, and simulations support our theoretical results. A real‐data example is presented to demonstrate the method. The Canadian Journal of Statistics 38: 519–539; 2010 © 2010 Statistical Society of Canada     

Methodological issues with adaptation of clinical trial design

Adaptation of clinical trial design generates many issues that have not been resolved for practical applications, though statistical methodology has advanced greatly. This paper focuses on some methodological issues. In one type of adaptation such as sample size re-estimation, only the postulated value of a parameter for planning the trial size may be altered. In another type, the originally intended hypothesis for testing may be modified using the internal data accumulated at an interim time of the trial, such as changing the primary endpoint and dropping a treatment arm. For sample size re-estimation, we make a contrast between an adaptive test weighting the two-stage test statistics with the statistical information given by the original design and the original sample mean test with a properly corrected critical value. We point out the difficulty in planning a confirmatory trial based on the crude information generated by exploratory trials. In regards to selecting a primary endpoint, we argue that the selection process that allows switching from one endpoint to the other with the internal data of the trial is not very likely to gain a power advantage over the simple process of selecting one from the two endpoints by testing them with an equal split of alpha (Bonferroni adjustment). For dropping a treatment arm, distributing the remaining sample size of the discontinued arm to other treatment arms can substantially improve the statistical power of identifying a superior treatment arm in the design. A common difficult methodological issue is that of how to select an adaptation rule in the trial planning stage. Pre-specification of the adaptation rule is important for the practicality consideration. Changing the originally intended hypothesis for testing with the internal data generates great concerns to clinical trial researchers.     

Location‐invariant Multi‐sample U‐tests for Covariance Matrices with Large Dimension

For two or more multivariate distributions with common covariance matrix, test statistics for certain special structures of the common covariance matrix are presented when the dimension of the multivariate vectors may exceed the number of such vectors. The test statistics are constructed as functions of location‐invariant estimators defined as U‐statistics, and the corresponding asymptotic theory is used to derive the limiting distributions of the proposed tests. The properties of the test statistics are established under mild and practical assumptions, and the same are numerically demonstrated using simulation results with small or moderate sample sizes and large dimensions.     

Integrating phase 2 into phase 3 based on an intermediate endpoint while accounting for a cure proportion—With an application to the design of a clinical trial in acute myeloid leukemia

For a trial with primary endpoint overall survival for a molecule with curative potential, statistical methods that rely on the proportional hazards assumption may underestimate the power and the time to final analysis. We show how a cure proportion model can be used to get the necessary number of events and appropriate timing via simulation. If phase 1 results for the new drug are exceptional and/or the medical need in the target population is high, a phase 3 trial might be initiated after phase 1. Building in a futility interim analysis into such a pivotal trial may mitigate the uncertainty of moving directly to phase 3. However, if cure is possible, overall survival might not be mature enough at the interim to support a futility decision. We propose to base this decision on an intermediate endpoint that is sufficiently associated with survival. Planning for such an interim can be interpreted as making a randomized phase 2 trial a part of the pivotal trial: If stopped at the interim, the trial data would be analyzed, and a decision on a subsequent phase 3 trial would be made. If the trial continues at the interim, then the phase 3 trial is already underway. To select a futility boundary, a mechanistic simulation model that connects the intermediate endpoint and survival is proposed. We illustrate how this approach was used to design a pivotal randomized trial in acute myeloid leukemia and discuss historical data that informed the simulation model and operational challenges when implementing it.     

Increasing the sample size at interim for a two‐sample experiment without Type I error inflation

For the case of a one‐sample experiment with known variance σ²=1, it has been shown that at interim analysis the sample size (SS) may be increased by any arbitrary amount provided: (1) The conditional power (CP) at interim is ?50% and (2) there can be no decision to decrease the SS (stop the trial early). In this paper we verify this result for the case of a two‐sample experiment with proportional SS in the treatment groups and an arbitrary common variance. Numerous authors have presented the formula for the CP at interim for a two‐sample test with equal SS in the treatment groups and an arbitrary common variance, for both the one‐ and two‐sided hypothesis tests. In this paper we derive the corresponding formula for the case of unequal, but proportional SS in the treatment groups for both one‐sided superiority and two‐sided hypothesis tests. Finally, we present an SAS macro for doing this calculation and provide a worked out hypothetical example. In discussion we note that this type of trial design trades the ability to stop early (for lack of efficacy) for the elimination of the Type I error penalty. The loss of early stopping requires that such a design employs a data monitoring committee, blinding of the sponsor to the interim calculations, and pre‐planning of how much and under what conditions to increase the SS and that this all be formally written into an interim analysis plan before the start of the study. Copyright © 2009 John Wiley & Sons, Ltd.     

Distribution of the two‐sample t‐test statistic following blinded sample size re‐estimation

We consider the blinded sample size re‐estimation based on the simple one‐sample variance estimator at an interim analysis. We characterize the exact distribution of the standard two‐sample t‐test statistic at the final analysis. We describe a simulation algorithm for the evaluation of the probability of rejecting the null hypothesis at given treatment effect. We compare the blinded sample size re‐estimation method with two unblinded methods with respect to the empirical type I error, the empirical power, and the empirical distribution of the standard deviation estimator and final sample size. We characterize the type I error inflation across the range of standardized non‐inferiority margin for non‐inferiority trials, and derive the adjusted significance level to ensure type I error control for given sample size of the internal pilot study. We show that the adjusted significance level increases as the sample size of the internal pilot study increases. Copyright © 2016 John Wiley & Sons, Ltd.