A structured framework for assessing sensitivity to missing data assumptions in longitudinal clinical trials

The objective of this research was to demonstrate a framework for drawing inference from sensitivity analyses of incomplete longitudinal clinical trial data via a re‐analysis of data from a confirmatory clinical trial in depression. A likelihood‐based approach that assumed missing at random (MAR) was the primary analysis. Robustness to departure from MAR was assessed by comparing the primary result to those from a series of analyses that employed varying missing not at random (MNAR) assumptions (selection models, pattern mixture models and shared parameter models) and to MAR methods that used inclusive models. The key sensitivity analysis used multiple imputation assuming that after dropout the trajectory of drug‐treated patients was that of placebo treated patients with a similar outcome history (placebo multiple imputation). This result was used as the worst reasonable case to define the lower limit of plausible values for the treatment contrast. The endpoint contrast from the primary analysis was ? 2.79 (p = .013). In placebo multiple imputation, the result was ? 2.17. Results from the other sensitivity analyses ranged from ? 2.21 to ? 3.87 and were symmetrically distributed around the primary result. Hence, no clear evidence of bias from missing not at random data was found. In the worst reasonable case scenario, the treatment effect was 80% of the magnitude of the primary result. Therefore, it was concluded that a treatment effect existed. The structured sensitivity framework of using a worst reasonable case result based on a controlled imputation approach with transparent and debatable assumptions supplemented a series of plausible alternative models under varying assumptions was useful in this specific situation and holds promise as a generally useful framework. Copyright © 2012 John Wiley & Sons, Ltd.     

Handling of missing data in long‐term clinical trials: a case study

Missing data in clinical trials is a well‐known problem, and the classical statistical methods used can be overly simple. This case study shows how well‐established missing data theory can be applied to efficacy data collected in a long‐term open‐label trial with a discontinuation rate of almost 50%. Satisfaction with treatment in chronically constipated patients was the efficacy measure assessed at baseline and every 3 months postbaseline. The improvement in treatment satisfaction from baseline was originally analyzed with a paired t‐test ignoring missing data and discarding the correlation structure of the longitudinal data. As the original analysis started from missing completely at random assumptions regarding the missing data process, the satisfaction data were re‐examined, and several missing at random (MAR) and missing not at random (MNAR) techniques resulted in adjusted estimate for the improvement in satisfaction over 12 months. Throughout the different sensitivity analyses, the effect sizes remained significant and clinically relevant. Thus, even for an open‐label trial design, sensitivity analysis, with different assumptions for the nature of dropouts (MAR or MNAR) and with different classes of models (selection, pattern‐mixture, or multiple imputation models), has been found useful and provides evidence towards the robustness of the original analyses; additional sensitivity analyses could be undertaken to further qualify robustness. Copyright © 2012 John Wiley & Sons, Ltd.     

PARAMETRIC FRACTIONAL IMPUTATION FOR NON‐IGNORABLE CATEGORICAL MISSING DATA WITH FOLLOW‐UP

Incomplete data subject to non‐ignorable non‐response are often encountered in practice and have a non‐identifiability problem. A follow‐up sample is randomly selected from the set of non‐respondents to avoid the non‐identifiability problem and get complete responses. Glynn, Laird, & Rubin analyzed non‐ignorable missing data with a follow‐up sample under a pattern mixture model. In this article, maximum likelihood estimation of parameters of the categorical missing data is considered with a follow‐up sample under a selection model. To estimate the parameters with non‐ignorable missing data, the EM algorithm with weighting, proposed by Ibrahim, is used. That is, in the E‐step, the weighted mean is calculated using the fractional weights for imputed data. Variances are estimated using the approximated jacknife method. Simulation results are presented to compare the proposed method with previously presented methods.     

Control‐based imputation for sensitivity analyses in informative censoring for recurrent event data

In clinical trials, missing data commonly arise through nonadherence to the randomized treatment or to study procedure. For trials in which recurrent event endpoints are of interests, conventional analyses using the proportional intensity model or the count model assume that the data are missing at random, which cannot be tested using the observed data alone. Thus, sensitivity analyses are recommended. We implement the control‐based multiple imputation as sensitivity analyses for the recurrent event data. We model the recurrent event using a piecewise exponential proportional intensity model with frailty and sample the parameters from the posterior distribution. We impute the number of events after dropped out and correct the variance estimation using a bootstrap procedure. We apply the method to an application of sitagliptin study.     

Impact of missing data on type 1 error rates in non‐inferiority trials

In this paper, a simulation study is conducted to systematically investigate the impact of different types of missing data on six different statistical analyses: four different likelihood‐based linear mixed effects models and analysis of covariance (ANCOVA) using two different data sets, in non‐inferiority trial settings for the analysis of longitudinal continuous data. ANCOVA is valid when the missing data are completely at random. Likelihood‐based linear mixed effects model approaches are valid when the missing data are at random. Pattern‐mixture model (PMM) was developed to incorporate non‐random missing mechanism. Our simulations suggest that two linear mixed effects models using unstructured covariance matrix for within‐subject correlation with no random effects or first‐order autoregressive covariance matrix for within‐subject correlation with random coefficient effects provide well control of type 1 error (T1E) rate when the missing data are completely at random or at random. ANCOVA using last observation carried forward imputed data set is the worst method in terms of bias and T1E rate. PMM does not show much improvement on controlling T1E rate compared with other linear mixed effects models when the missing data are not at random but is markedly inferior when the missing data are at random. Copyright © 2009 John Wiley & Sons, Ltd.     

An Extended Single‐index Model with Missing Response at Random

An extended single‐index model is considered when responses are missing at random. A three‐step estimation procedure is developed to define an estimator for the single‐index parameter vector by a joint estimating equation. The proposed estimator is shown to be asymptotically normal. An algorithm for computing this estimator is proposed. This algorithm only involves one‐dimensional nonparametric smoothers, thereby avoiding the data sparsity problem caused by high model dimensionality. Some simulation studies are conducted to investigate the finite sample performances of the proposed estimators.     

Hybrid pairwise‐likelihood estimation methods for incomplete longitudinal binary data

In longitudinal data, missing observations occur commonly with incomplete responses and covariates. Missing data can have a ‘missing not at random’ mechanism, a non‐monotone missing pattern, and moreover response and covariates can be missing not simultaneously. To avoid complexities in both modelling and computation, a two‐stage estimation method and a pairwise‐likelihood method are proposed. The two‐stage estimation method enjoys simplicities in computation, but incurs more severe efficiency loss. On the other hand, the pairwise approach leads to estimators with better efficiency, but can be cumbersome in computation. In this paper, we develop a compromise method using a hybrid pairwise‐likelihood framework. Our proposed approach has better efficiency than the two‐stage method, but its computational cost is still reasonable compared to the pairwise approach. The performance of the methods is evaluated empirically by means of simulation studies. Our methods are used to analyse longitudinal data obtained from the National Population Health Study.     

Reference‐based sensitivity analysis for time‐to‐event data

The analysis of time‐to‐event data typically makes the censoring at random assumption, ie, that—conditional on covariates in the model—the distribution of event times is the same, whether they are observed or unobserved (ie, right censored). When patients who remain in follow‐up stay on their assigned treatment, then analysis under this assumption broadly addresses the de jure, or “while on treatment strategy” estimand. In such cases, we may well wish to explore the robustness of our inference to more pragmatic, de facto or “treatment policy strategy,” assumptions about the behaviour of patients post‐censoring. This is particularly the case when censoring occurs because patients change, or revert, to the usual (ie, reference) standard of care. Recent work has shown how such questions can be addressed for trials with continuous outcome data and longitudinal follow‐up, using reference‐based multiple imputation. For example, patients in the active arm may have their missing data imputed assuming they reverted to the control (ie, reference) intervention on withdrawal. Reference‐based imputation has two advantages: (a) it avoids the user specifying numerous parameters describing the distribution of patients' postwithdrawal data and (b) it is, to a good approximation, information anchored, so that the proportion of information lost due to missing data under the primary analysis is held constant across the sensitivity analyses. In this article, we build on recent work in the survival context, proposing a class of reference‐based assumptions appropriate for time‐to‐event data. We report a simulation study exploring the extent to which the multiple imputation estimator (using Rubin's variance formula) is information anchored in this setting and then illustrate the approach by reanalysing data from a randomized trial, which compared medical therapy with angioplasty for patients presenting with angina.     

Missing data sensitivity analysis for recurrent event data using controlled imputation

Statistical analyses of recurrent event data have typically been based on the missing at random assumption. One implication of this is that, if data are collected only when patients are on their randomized treatment, the resulting de jure estimator of treatment effect corresponds to the situation in which the patients adhere to this regime throughout the study. For confirmatory analysis of clinical trials, sensitivity analyses are required to investigate alternative de facto estimands that depart from this assumption. Recent publications have described the use of multiple imputation methods based on pattern mixture models for continuous outcomes, where imputation for the missing data for one treatment arm (e.g. the active arm) is based on the statistical behaviour of outcomes in another arm (e.g. the placebo arm). This has been referred to as controlled imputation or reference‐based imputation. In this paper, we use the negative multinomial distribution to apply this approach to analyses of recurrent events and other similar outcomes. The methods are illustrated by a trial in severe asthma where the primary endpoint was rate of exacerbations and the primary analysis was based on the negative binomial model. Copyright © 2014 John Wiley & Sons, Ltd.     

Missing data in clinical trials: control‐based mean imputation and sensitivity analysis

In some randomized (drug versus placebo) clinical trials, the estimand of interest is the between‐treatment difference in population means of a clinical endpoint that is free from the confounding effects of “rescue” medication (e.g., HbA1c change from baseline at 24 weeks that would be observed without rescue medication regardless of whether or when the assigned treatment was discontinued). In such settings, a missing data problem arises if some patients prematurely discontinue from the trial or initiate rescue medication while in the trial, the latter necessitating the discarding of post‐rescue data. We caution that the commonly used mixed‐effects model repeated measures analysis with the embedded missing at random assumption can deliver an exaggerated estimate of the aforementioned estimand of interest. This happens, in part, due to implicit imputation of an overly optimistic mean for “dropouts” (i.e., patients with missing endpoint data of interest) in the drug arm. We propose an alternative approach in which the missing mean for the drug arm dropouts is explicitly replaced with either the estimated mean of the entire endpoint distribution under placebo (primary analysis) or a sequence of increasingly more conservative means within a tipping point framework (sensitivity analysis); patient‐level imputation is not required. A supplemental “dropout = failure” analysis is considered in which a common poor outcome is imputed for all dropouts followed by a between‐treatment comparison using quantile regression. All analyses address the same estimand and can adjust for baseline covariates. Three examples and simulation results are used to support our recommendations.     

Investigation of mixed model repeated measures analyses and non‐linear random coefficient models in the context of long‐term efficacy data

The longitudinal data from 2 published clinical trials in adult subjects with upper limb spasticity (a randomized placebo‐controlled study [NCT01313299] and its long‐term open‐label extension [NCT01313312]) were combined. Their study designs involved repeat intramuscular injections of abobotulinumtoxinA (Dysport®), and efficacy endpoints were collected accordingly. With the objective of characterizing the pattern of response across cycles, Mixed Model Repeated Measures analyses and Non‐Linear Random Coefficient (NLRC) analyses were performed and their results compared. The Mixed Model Repeated Measures analyses, commonly used in the context of repeated measures with missing dependent data, did not involve any parametric shape for the curve of changes over time. Based on clinical expectations, the NLRC included a negative exponential function of the number of treatment cycles, with its asymptote and rate included as random coefficients in the model. Our analysis focused on 2 specific efficacy parameters reflecting complementary aspects of efficacy in the study population. A simulation study based on a similar study design was also performed to further assess the performance of each method under different patterns of response over time. This highlighted a gain of precision with the NLRC model, and most importantly the need for its assumptions to be verified to avoid potentially biased estimates. These analyses describe a typical situation and the conditions under which non‐linear mixed modeling can provide additional insights on the behavior of efficacy parameters over time. Indeed, the resulting estimates from the negative exponential NLRC can help determine the expected maximal effect and the treatment duration required to reach it.     

A Sample Selection Model with Skew‐normal Distribution

Non‐random sampling is a source of bias in empirical research. It is common for the outcomes of interest (e.g. wage distribution) to be skewed in the source population. Sometimes, the outcomes are further subjected to sample selection, which is a type of missing data, resulting in partial observability. Thus, methods based on complete cases for skew data are inadequate for the analysis of such data and a general sample selection model is required. Heckman proposed a full maximum likelihood estimation method under the normality assumption for sample selection problems, and parametric and non‐parametric extensions have been proposed. We generalize Heckman selection model to allow for underlying skew‐normal distributions. Finite‐sample performance of the maximum likelihood estimator of the model is studied via simulation. Applications illustrate the strength of the model in capturing spurious skewness in bounded scores, and in modelling data where logarithm transformation could not mitigate the effect of inherent skewness in the outcome variable.     

An efficient analysis of covariance model for crossover thorough QT studies with period‐specific pre‐dose baselines

Baseline adjustment is an important consideration in thorough QT studies for non‐antiarrhythmic drugs. For crossover studies with period‐specific pre‐dose baselines, we propose a by‐time‐point analysis of covariance model with change from pre‐dose baseline as response, treatment as a fixed effect, pre‐dose baseline for current treatment and pre‐dose baseline averaged across treatments as covariates, and subject as a random effect. Additional factors such as period and sex should be included in the model as appropriate. Multiple pre‐dose measurements can be averaged to obtain a pre‐dose‐averaged baseline and used in the model. We provide conditions under which the proposed model is more efficient than other models. We demonstrate the efficiency and robustness of the proposed model both analytically and through simulation studies. The advantage of the proposed model is also illustrated using the data from a real clinical trial. Copyright © 2014 John Wiley & Sons, Ltd.     

Weighted log‐rank test for time‐to‐event data in immunotherapy trials with random delayed treatment effect and cure rate

A cancer clinical trial with an immunotherapy often has 2 special features, which are patients being potentially cured from the cancer and the immunotherapy starting to take clinical effect after a certain delay time. Existing testing methods may be inadequate for immunotherapy clinical trials, because they do not appropriately take the 2 features into consideration at the same time, hence have low power to detect the true treatment effect. In this paper, we proposed a piece‐wise proportional hazards cure rate model with a random delay time to fit data, and a new weighted log‐rank test to detect the treatment effect of an immunotherapy over a chemotherapy control. We showed that the proposed weight was nearly optimal under mild conditions. Our simulation study showed a substantial gain of power in the proposed test over the existing tests and robustness of the test with misspecified weight. We also introduced a sample size calculation formula to design the immunotherapy clinical trials using the proposed weighted log‐rank test.     

A mixture model using likelihood‐based and Bayesian approaches for identifying responders and non‐responders in longitudinal clinical trials

A longitudinal mixture model for classifying patients into responders and non‐responders is established using both likelihood‐based and Bayesian approaches. The model takes into consideration responders in the control group. Therefore, it is especially useful in situations where the placebo response is strong, or in equivalence trials where the drug in development is compared with a standard treatment. Under our model, a treatment shows evidence of being effective if it increases the proportion of responders or increases the response rate among responders in the treated group compared with the control group. Therefore, the model has flexibility to accommodate different situations. The proposed method is illustrated using simulation and a depression clinical trial dataset for the likelihood‐based approach, and the same depression clinical trial dataset for the Bayesian approach. The likelihood‐based and Bayesian approaches generated consistent results for the depression trial data. In both the placebo group and the treated group, patients are classified into two components with distinct response rate. The proportion of responders is shown to be significantly higher in the treated group compared with the control group, suggesting the treatment paroxetine is effective. Copyright © 2014 John Wiley & Sons, Ltd.     

Linear Increments with Non‐monotone Missing Data and Measurement Error

Linear increments (LI) are used to analyse repeated outcome data with missing values. Previously, two LI methods have been proposed, one allowing non‐monotone missingness but not independent measurement error and one allowing independent measurement error but only monotone missingness. In both, it was suggested that the expected increment could depend on current outcome. We show that LI can allow non‐monotone missingness and either independent measurement error of unknown variance or dependence of expected increment on current outcome but not both. A popular alternative to LI is a multivariate normal model ignoring the missingness pattern. This gives consistent estimation when data are normally distributed and missing at random (MAR). We clarify the relation between MAR and the assumptions of LI and show that for continuous outcomes multivariate normal estimators are also consistent under (non‐MAR and non‐normal) assumptions not much stronger than those of LI. Moreover, when missingness is non‐monotone, they are typically more efficient.     

Short notes on maximum likelihood inference for control‐based pattern‐mixture models

A likelihood‐based analytical approach has been proposed for the control‐based pattern‐mixture model and its extension. In this note, we derive equivalent but simpler analytical expressions for the treatment effect and its variance for these control‐based pattern mixture models. Our formulae are easier to use and interpret. An application of our formulae to an antidepressant trial is provided, in which the likelihood‐based analysis is compared with the multiple imputation approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Subgroup Analysis with Time‐to‐Event Data Under a Logistic‐Cox Mixture Model

Subgroup detection has received increasing attention recently in different fields such as clinical trials, public management and market segmentation analysis. In these fields, people often face time‐to‐event data, which are commonly subject to right censoring. This paper proposes a semiparametric Logistic‐Cox mixture model for subgroup analysis when the interested outcome is event time with right censoring. The proposed method mainly consists of a likelihood ratio‐based testing procedure for testing the existence of subgroups. The expectation–maximization iteration is applied to improve the testing power, and a model‐based bootstrap approach is developed to implement the testing procedure. When there exist subgroups, one can also use the proposed model to estimate the subgroup effect and construct predictive scores for the subgroup membership. The large sample properties of the proposed method are studied. The finite sample performance of the proposed method is assessed by simulation studies. A real data example is also provided for illustration.     

Sensitivity to censored‐at‐random assumption in the analysis of time‐to‐event endpoints

Over the past years, significant progress has been made in developing statistically rigorous methods to implement clinically interpretable sensitivity analyses for assumptions about the missingness mechanism in clinical trials for continuous and (to a lesser extent) for binary or categorical endpoints. Studies with time‐to‐event outcomes have received much less attention. However, such studies can be similarly challenged with respect to the robustness and integrity of primary analysis conclusions when a substantial number of subjects withdraw from treatment prematurely prior to experiencing an event of interest. We discuss how the methods that are widely used for primary analyses of time‐to‐event outcomes could be extended in a clinically meaningful and interpretable way to stress‐test the assumption of ignorable censoring. We focus on a ‘tipping point’ approach, the objective of which is to postulate sensitivity parameters with a clear clinical interpretation and to identify a setting of these parameters unfavorable enough towards the experimental treatment to nullify a conclusion that was favorable to that treatment. Robustness of primary analysis results can then be assessed based on clinical plausibility of the scenario represented by the tipping point. We study several approaches for conducting such analyses based on multiple imputation using parametric, semi‐parametric, and non‐parametric imputation models and evaluate their operating characteristics via simulation. We argue that these methods are valuable tools for sensitivity analyses of time‐to‐event data and conclude that the method based on piecewise exponential imputation model of survival has some advantages over other methods studied here. Copyright © 2016 John Wiley & Sons, Ltd.