Operation-based flowtime estimation in a dynamic job shop

In the scheduling literature, estimation of job flowtimes has been an important issue since the late 1960s. The previous studies focus on the problem in the context of due date assignment and develop methods using aggregate information in the estimation process. In this study, we propose a new flowtime estimation method that utilizes the detailed job, shop and route information for operations of jobs as well as the machine imbalance information. This type of information is now available in computer-integrated manufacturing systems. The performance of the proposed method is measured by computer simulation under various experimental conditions. It is compared with the existing flowtime estimation methods for a wide variety of performance measures. The results indicate that the proposed method outperforms all the other flowtime estimation methods. Moreover, it is quite robust to changing shop conditions (i.e., machine breakdowns, arrival rate and processing time variations, etc.). A comprehensive bibliography is also provided in the paper.     

Concerning Workload Control and Order Release: The Pre‐Shop Pool Sequencing Decision

Every production planning concept that incorporates controlled order release will initially withhold jobs from the shop floor and create a pre‐shop pool. Order release is a key component of the Workload Control concept that aims to maintain work‐in‐process within limits while ensuring due dates are met. Order release includes two decisions: (i) a sequencing decision that establishes the order in which jobs are considered for release; and, (ii) a selection decision that determines the criteria for choosing jobs for release. While selection has received much research attention, sequencing has been largely neglected. Using simulation, this study uncovers the potential for performance improvement in the sequencing decision and improves our understanding of how order release methods should be designed. Although most prior studies apply time‐oriented sequencing rules and load‐oriented selection rules, analysis reveals that load balancing considerations should also be incorporated in the sequencing decision. But an exclusive focus on load balancing is shown to increase mean tardiness and, paradoxically, require high workloads. A new sequencing rule is developed that only balances loads when multiple orders become urgent. It avoids high mean tardiness and allows the shop to operate at a low workload level. At the same time, the percentage tardy is reduced by up to 50% compared to a purely time‐oriented rule. The findings have implications not only for Workload Control but for any concept that features order release control, such as ConWIP and Drum‐Buffer‐Rope.     

Shop Floor Control When Tacit Worker Knowledge is Important

We investigate a shop where the workers and supervisors have tacit knowledge of how to operate efficiently and where efficiency is important to providing capacity to meet demand. This tacit knowledge includes setup dependencies between products as well as which worker or machine is best suited for a particular product. We discuss a real‐world shop where this is the case. Management expects workers and supervisors to use their knowledge to schedule efficiently by monitoring their performance based on standards. The question that we explore is how management should control for due date performance in light of the discretion given to the workers and supervisors to sequence jobs on the basis of efficiency. We explore management control of due date performance through the use of order review and release (ORR) and management expediting. We find that although ORR is quite effective at reducing work‐in‐process (WIP) inventories, it may foster very late deliveries in a shop such as this. In fact, under such conditions, deftly executed expediting with no ORR at all can be far more effective at supporting all deliveries. Even improving ORR into a hybrid by actively updating path efficiencies (observed from supervisor/worker scheduling) did not support a change to this conclusion. Conversely, when conditions are created where tacit knowledge plays a reduced role or utilization is decreased, ORR delivers in a timely manner. The interaction between utilization, WIP levels, and worker knowledge all help dictate the appropriate control methodology.     

An Evaluation of Capacity Sensitive Order Review and Release Procedures in Job Shops

We investigate the performance of capacity-sensitive order review and release (ORR) procedures in job shop environments that have not been previously explored. Previous research has ignored the case of job shops which must perform to very tight due-dates because of time-sensitive customers. We propose and test a new capacity sensitive ORR procedure called path based bottleneck (PBB) in such environments, along with the modified infinite loading (MIL) procedure which has been shown to work well in several studies. We compare the performance of these two controlled release rules with that of immediate release rule under different conditions of capacity utilization and customer specified exogenous duedates. Our results indicate that PBB performs well in lowering total costs when due-dates are tight, while MIL is a better procedure with relatively loose to medium due-dates. We also show that in many cases, the shortest processing time (SPT) dispatching rule is a superior performer than a due-date based rule like critical ratio (CR); a conclusion which is contrary to the existing research in this area. In addition, the shop floor control policies recommended are shown to be sensitive to the cost structure of the firm. The managerial implications of this research in providing effective shop floor control in job shops operating under tight due-date conditions are also discussed.     

Workload Control and Order Release: A Lean Solution for Make‐to‐Order Companies

Protecting throughput from variance is the key to achieving lean. Workload control (WLC) accomplishes this in complex make‐to‐order job shops by controlling lead times, capacity, and work‐in‐process (WIP). However, the concept has been dismissed by many authors who believe its order release mechanism reduces the effectiveness of shop floor dispatching and increases work center idleness, thereby also increasing job tardiness results. We show that these problems have been overcome. A WLC order release method known as “LUMS OR” (Lancaster University Management School order release) combines continuous with periodic release, allowing the release of work to be triggered between periodic releases if a work center is starving. This paper refines the method based on the literature (creating “LUMS COR” [Lancaster University Management School corrected order release]) before comparing its performance against the best‐performing purely periodic and continuous release rules across a range of flow directions, from the pure job shop to the general flow shop. Results demonstrate that LUMS COR and the continuous WLC release methods consistently outperform purely periodic release and Constant WIP. LUMS COR is considered the best solution in practice due to its excellent performance and ease of implementation. Findings have significant implications for research and practice: throughput times and job tardiness results can be improved simultaneously and order release and dispatching rules can complement each other. Thus, WLC represents an effective means of implementing lean principles in a make‐to‐order context.     

The sensitivity of job mix and load capacity bottlenecks on inventory and due date performance in a manufacturing system

Based on a benchmark job-lot manufacturing system a simulation study was carried out to compare the performance of just-in-time (JIT) shop control system Kanban with conventional job-shop control procedures. The shop control policies were tested under a good manufacturing environment and the effects of job mix and load capacity bottlenecks on various shop control policies were tested. From the simulation results, it is inferred that there are shop control procedures that perform better than the Kanban in a job shop. It has been observed that even with adequate capacity, bottleneck areas surface due to fluctuations in the shop load. Kanban is not appropriate in such a situation because capacity bottlenecks can significantly reduce the ell'ectiveness of a pull system. The disparateness in the processing requirements for jobs can seriously undermine the performance of the shop. This is the type of shop environment where the shop control procedures will be most effective. Although Kanban came out best when the load capacity bottlenecks and the disparateness of the job mix were removed, the selected shop control variable combinations closely approximated the Kanban result. Although many features of JIT can be implemented in any system, companies trying to adopt JIT should remember that Kanban requires a rigid system intolerant of any deviation.     

Application of the Net Present Value Criterion in Random and Flow Shop Scheduling*

While the majority of the literature on shop scheduling has emphasized time-based performance criteria such as mean flow time, lateness, and tardiness, the primary goal of management should be the maximization of shop profitability. In this research the net present value (NPV) criterion is introduced to measure shop profitability. This measure combines aspects of job flow time and inventory holding costs into a single measure. A simulation model of a job shop is used to examine the performance of a variety of time- and value-based scheduling rules. These rules are evaluated with respect to the NPV criterion in both random and flow shop environments. The results suggest that priority rules that utilize monetary information about jobs yield a higher NPV than many time-based rules in most situations, with little sacrifice in job tardiness. A well-researched time-based rule, critical ratio, also provides excellent performance when the shop is heavily loaded.     

Lot Splitting in Stochastic Flow Shop and Job Shop Environments*

In recent years many firms have been implementing small lot size production. Lot splitting breaks large orders into smaller transfer lots and offers the ability to move parts more quickly through the production process. This paper extends the deterministic studies by investigating various lot splitting policies in both stochastic job shop and stochastic flow shop settings using performance measures of mean flow time and the standard deviation of flow time. Using a computer simulation experiment, we found that in stochastic dynamic job shops, the number of lot splits is more important than the exact form of splitting. However, when optimal job sizes are determined for each scenario, we found a few circumstances where the implementation of a small initial split, called a “flag,” can provide measurable improvement in flow time performance. Interestingly, the vast majority of previous research indicates that methods other than equal lot splitting typically improves makespan performance. The earlier research, however, has been set in the static, deterministic flow shop environment. Thus, our results are of practical interest since they show that the specific method of lot splitting is important in only a small set of realistic environments while the choice of an appropriate number of splits is typically more important.     

Shop Performance Implications of Using Cells,Partial Cells,and Remainder Cells*

This paper considers the application of cellular manufacturing (CM) to batch production by exploring the shop floor performance trade‐offs associated with shops employing different levels of CM. The literature has alluded to a continuum that exists between the purely departmentalized job shop and the completely cellular shop. However, the vast majority of CM research exists at the extremes of this continuum. Here, we intend to probe performance relationships by comparing shops that exist at different stages of CM adoption. Specifically, we begin with a hypothetical departmentalized shop found in the CM literature, and in a stepwise fashion, form independent cells. At each stage, flow time and tardiness performance is recorded. Modeling results indicate that, depending on shop conditions and managerial objectives, superior shop performance may be recorded by the job shop, the cell shop, or by one of the shops between these extreme points. In fact, under certain conditions, shops that contain partially formed cells perform better than shops that use completely formed cells. Additional results demonstrate that in order to achieve excellent performance, managers investigating specific layouts need to pay especially close attention to changes in machine utilization as machine groups are partitioned into cells.     

Dynamic Group Scheduling Heuristics in a Flow-through Cell Environment*

The increased use of cellular manufacturing configurations designed to grapple with increasing competitive pressures is providing manufacturing managers and engineers with a broad variety of operational challenges. Many questions concerning the best procedures and policies for the day-to-day operation of manufacturing cells are still unanswered. The primary objective of this study is to compare the performance of traditional single-stage heuristics and the two-stage group scheduling heuristics that have exhibited superior performance in previous studies in a flow-through cell environment under a rigorous set of experimental conditions. Such a comparison is of great interest since each previous study has focused on proposing new heuristics and testing them against some particular baseline heuristic, often without comprehensive comparisons to the broad variety of previously proposed heuristics. Two single-stage heuristics and four two-stage heuristics are examined under sixteen experimental conditions (four experimental factors at two levels each). The experimental factors examined are shop load, due date tightness, setup to run-time ratio, and interarrival time distribution. Results vary by experimental condition and performance criteria, but in general, two-stage heuristics outperformed single-stage heuristics under all experimental conditions, as well as being relatively insensitive to changing experimental conditions. In addition, two of the two-stage heuristics displayed superior performance on all performance measures under most experimental conditions. Finally, the results indicated that interarrival time distribution does have a major impact on the performance of scheduling heuristics.     

A comparative study of some priority dispatching rules under different shop loads

Priority dispatching rules and shop load affect job-shop performance. This paper evaluates ten different priority dispatching rules with respect to six different performance criteria under light, medium and heavy shop loads. Simulation was used as a tool to determine the rankings of the dispatching rules for a given shop load and performance criteria. A comparative study was conducted to investigate the performance of these rules. Two rules, ‘shortest processing time” and ‘least work remaining’, performed well under criteria related to the processing time. It was found that the rules that perform well in average and r.m.s. tardiness perform poorly under percentage-of-jobs-late criterion. The experimental results are conveyed with critical comments on the performance of the dispatching rules under different loading conditions of the shop.     

Lean Control for Make‐to‐Order Companies: Integrating Customer Enquiry Management and Order Release

A lead time that is short, predictable, and reliable is an increasingly important criterion in supplier selection. Although many companies may achieve this through lean implementation, high‐variety manufacturers, for example, small and medium‐sized make‐to‐order companies, have found that lean's planning and control techniques do not apply. This article outlines a planning and control concept known as workload control (WLC) that integrates customer enquiry management, including a due‐date setting rule, with order release control. Simulation is then used to assess its impact on shop performance. Results demonstrate that an integrated WLC concept can reduce the percentage of tardy jobs—so short lead times can be realistically quoted—while also reducing and stabilizing workloads. WLC can level demand and production over time when work is not standardized and it is not possible to synchronize flows on the shop floor. Results are shown to be robust to changes in routing characteristics, the mix of orders with due dates specified by the customer and proposed internally, and the strike rate (or order‐winning probability). Hence, an integrated approach to WLC represents an important step toward achieving lean in make‐to‐order companies.     

车间作业计划编制问题的统一描述与应用——介绍车间作业计划编制体系的概念

提出车间作业计划编制体系的概念以统一描述车间作业计划问题,车间计划问题在内容上由计划类型、计划期、期量标准和编制方法四方面组成,在形式上与生产类型、生产组织形式和资源负荷能力相关,内容与形式的统一揭示了车间作业计划编制问题的一般规律,特别地,在一个飞机装配车间结合计划编制体系的概念,迅速确定了装配作业计划问题的界限,并提出用Petri网求解计划问题的新方法,它与各种经验方法相比,便于计算机模拟与实现。     

STATE-OF-THE-ART SURVEY: OPEN QUEUEING NETWORKS: OPTIMIZATION AND PERFORMANCE EVALUATION MODELS FOR DISCRETE MANUFACTURING SYSTEMS

In this survey we review methods to analyze open queueing network models for discrete manufacturing systems. We focus on design and planning models for job shops. The survey is divided in two parts: in the first we review exact and approximate decomposition methods for performance evaluation models for single and multiple product class networks. The second part reviews optimization models of three categories of problems: the first minimizes capital investment subject to attaining a performance measure (WIP or lead time), the second seeks to optimize the performance measure subject to resource constraints, and the third explores recent research developments in complexity reduction through shop redesign and products partitioning.     

Optimal Production and Admission Policies in Make‐to‐Stock/Make‐to‐Order Manufacturing Systems

In this article, we study optimal production and admission control policies in manufacturing systems that produce two types of products: one type consists of identical items that are produced to stock, while the other has varying features and is produced to order. The model is motivated by applications from various industries, in particular, the automobile industry, where a part supplier receives orders from both an original equipment manufacturer and the aftermarket. The product for the original equipment manufacturer is produced to stock, it has higher priority, and its demands are fully accepted. The aftermarket product is produced to order, and its demands can be either accepted or rejected. We characterize the optimal production and admission policies with a partial‐linear structure, and using computational analysis, we provide insights into the benefits of the new policies. We also investigate the impact of production capacity, cost structure, and demand structure on system performance.     

A multi-objective particle swarm for a flow shop scheduling problem

Flow shop problems as a typical manufacturing challenge have gained wide attention in academic fields. In this paper, we consider a bi-criteria permutation flow shop scheduling problem, where weighted mean completion time and weighted mean tardiness are to be minimized simultaneously. Since a flow shop scheduling problem has been proved to be NP-hard in strong sense, an effective multi-objective particle swarm (MOPS), exploiting a new concept of the Ideal Point and a new approach to specify the superior particle's position vector in the swarm, is designed and used for finding locally Pareto-optimal frontier of the problem. To prove the efficiency of the proposed algorithm, various test problems are solved and the reliability of the proposed algorithm, based on some comparison metrics, is compared with a distinguished multi-objective genetic algorithm, i.e. SPEA-II. The computational results show that the proposed MOPS performs better than the genetic algorithm, especially for the large-sized problems.     

A Virtual Cellular Manufacturing Approach to Batch Production*

In this paper, Virtual Cellular Manufacturing (VCM), an alternative approach to implementing cellular manufacturing, is investigated. VCM combines the setup efficiency typically obtained by Group Technology (GT) cellular manufacturing (CM) systems with the routing flexibility of a job shop. Unlike traditional CM systems in which the shop is physically designed as a series of cells, family-based scheduling criteria are used to form logical cells within a shop using a process layout. The result is the formation of temporary, virtual cells as opposed to the more traditional, permanent, physical cells present in GT systems. Virtual cells allow the shop to be more responsive to changes in demand and workload patterns. Production using VCM is compared to production using traditional cellular and job shop approaches. Results indicate that VCM yields significantly better flow time and due date performance over a wide range of common operating conditions, as well as being more robust to demand variability.     

Optimal Solutions for the Single Batch,Flow Shop,Lot‐streaming Problem with Equal Sublots

Lot streaming is the process of splitting a production lot into sublots and then scheduling the sublots in overlapping fashion on the machines in order to improve the performance of the production system. Implementation of this concept arises in several batch production environments. These include, among others, printed circuit board assembly and semiconductor fabrication. There are several limitations in the lot‐streaming models available in the literature which affect their usefulness in reality. In this paper, we consider the single batch, flow shop, lot‐streaming problem but relax several of these limitations. The main contribution of this paper is to provide the production manager with a way of splitting a lot in order to optimize performance under various measures of performance and setup time considerations. In addition, the insight of the proposed procedure can be used to tackle more general versions of the problem considered.     

Dynamic selection of dispatching rules for job shop scheduling

Although the academic contribution to job shop scheduling is abundant, its impact on practice has been minimal. The most preferred approach to job shop scheduling in the industry is dispatching rules. A major criticism against dispatching rules is that there is no single universal rule. The effective choice of dispatching rules depends on the scheduling criterion and existing job shop conditions. In this paper, the authors have proposed a scheduling method based on the analytic hierarchy process, that dynamically selects the most appropriate dispatching rule from several candidate rules. The selection is based on the existing job shop conditions. This method is applied to two formal job shop problems, and the results for single dispatching rules are inferior to the method proposed in this paper.     

Route‐Independent Analysis of Available Capacity in Flexible Manufacturing Systems

In a job shop, because of large setup times, each operation is assigned to only one machine. There is no alternative routing. In a flexible manufacturing system, each manufacturing operation can often be performed on several machines. Therefore, with automated equipment, the capacity of a machine to perform certain operations is not independent of the capacity of other machines. Often, however, operations managers can use a route‐independent answer to production planning questions. For example, how much can be produced of a certain part type and when are important capacity questions in business negotiations, when the detailed routing and scheduling are not yet of interest or cannot be known. This paper provides a mathematical model for the route‐independent analysis of the capacity of flexible manufacturing systems based on a concept of operation types. An example is provided both to illustrate the use of operation types and to highlight the differences between the traditional route‐dependent and the proposed route‐independent formulations of capacity constraints. Some computational results are also given. Finally, a sensitivity analysis is developed to analyze the feasibility of production plans when production requirements and machine capacities can change.