E- and R-optimality of block designs for treatment-control comparisons

Abstract

We study optimal block designs for comparing a set of test treatments with a control treatment. We provide the class of all E-optimal approximate block designs, which is characterized by simple linear constraints. Based on this characterization, we obtain a class of E-optimal exact designs for unequal block sizes. In the studied model, we provide a statistical interpretation for wide classes of E-optimal designs. Moreover, we show that all approximate A-optimal designs and a large class of A-optimal exact designs for treatment-control comparisons are also R-optimal. This reinforces the observation that A-optimal designs perform well even for rectangular confidence regions.     

A-optimal designs for heteroscedastic multifactor regression models

Abstract

This paper searches for A-optimal designs for Kronecker product and additive regression models when the errors are heteroscedastic. Sufficient conditions are given so that A-optimal designs for the multifactor models can be built from A-optimal designs for their sub-models with a single factor. The results of an efficiency study carried out to check the adequacy of the products of optimal designs for uni-factor marginal models when these are used to estimate different multi-factor models are also reported.     

On Sampling Designs for Integral Estimation of a Random Process

Abstract

In this paper the problem of finding exactly optimal sampling designs for estimating the weighted integral of a stochastic process with a product covariance structure (R(s,t)=u(s)v(t), s<t) is discussed. The sampling designs for certain standard processes belonging to the product class are calculated. An asymptotic solution to the design problem also follows as a consequence.     

NESTING OPTIMAL MAIN EFFECTS PLANS AND OPTIMAL FOLDOVER DESIGNS

ABSTRACT

Optimal main effects plans (MEPs) and optimal foldover designs can often be performed as a series of nested optimal designs. Then, if the experiment cannot be completed due to time or budget constraints, the fraction already performed may still be an optimal design. We show that the optimal MEP for 4t factors in 4t + 4 points does not contain the optimal MEP for 4t factors in 4t + 2 points nested within it. In general, the optimal MEP for 4t factors in 4t + 4 points does not contain the optimal MEPs for 4t factors in 4t + 1, 4t + 2, or 4t + 3 points and the optimal MEP for 4t + 1 factors in 4t + 4 points does not contain the optimal MEPs for 4t + 1 factors in 4t + 2 or 4t + 3 points. We also show that the runs in an orthogonal design for 4t factors in 4t + 4 points, and the optimal foldover designs obtained by folding, should be performed in a certain sequence in order to avoid the possibility of a singular X'X matrix.     

Optimal designs for statistical analysis with Zernike polynomials

The Zernike polynomials arise in several applications such as optical metrology or image analysis on a circular domain. In the present paper, we determine optimal designs for regression models which are represented by expansions in terms of Zernike polynomials. We consider two estimation methods for the coefficients in these models and determine the corresponding optimal designs. The first one is the classical least squares method and Φ _p -optimal designs in the sense of Kiefer [Kiefer, J., 1974, General equivalence theory for optimum designs (approximate theory). Annals of Statistics, 2 849–879.] are derived, which minimize an appropriate functional of the covariance matrix of the least squares estimator. It is demonstrated that optimal designs with respect to Kiefer's Φ _p -criteria (p>?∞) are essentially unique and concentrate observations on certain circles in the experimental domain. E-optimal designs have the same structure but it is shown in several examples that these optimal designs are not necessarily uniquely determined. The second method is based on the direct estimation of the Fourier coefficients in the expansion of the expected response in terms of Zernike polynomials and optimal designs minimizing the trace of the covariance matrix of the corresponding estimator are determined. The designs are also compared with the uniform designs on a grid, which is commonly used in this context.     

A comparison study of effectiveness and robustness of robust economic designs of T2 chart using genetic algorithm

ABSTRACT

Recently, researchers have tried to design the T² chart economically to achieve the minimum possible quality cost; however, when T² chart is designed, it is important to consider multiple scenarios. This research presents the robust economic designs of the T² chart where there is more than one scenario. An illustrative example is used to demonstrate the effect of the model parameters on the optimal designs. The genetic algorithm optimization method is employed to obtain the optimal designs. Simulation studies show that the robust economic designs of T² chart are more effective than traditional economic design in practice.     

Construction of uniform designs for mixture experiments with complex constraints

Abstract

Mixture experiments have attracted increasingly attention due to their great practical value in production and living, while uniform designs over irregular experimental regions have become a hot topic in the area of experimental designs in the past two decades. Noting that the experimental region of a mixture experiment with q components under some constraints is in fact a (q ? 1)-dimensional geometry, this article proposes a new method for searching nearly uniform designs for mixture experiments with any complex constraints. Two examples with some tables and figures are given to illustrate this method.     

On mitigating collinearity through mixtures

In linear models having near collinear columns of X, ridge and surrogate estimators often are used to mitigate collinearity. A new class of estimators is based on mixtures, either of X and a design minimal in an ordered class or of the Fisher information and a scalar matrix. Comparisons are drawn among choices for the mixing parameter, and the estimators are found to be admissible relative to ordinary least squares. Case studies demonstrate that selected mixture designs are perturbed from the original design to a lesser extent than are those of the surrogate method, while retaining reasonable efficiency characteristics.     

The robust economic statistical design of the Hotelling's T2 chart

ABSTRACT

Economic statistical designs aim at minimizing the cost of process monitoring when a specific scenario or a set of estimated process and cost parameters is given. But, in practice the process may be affected by more than one scenario which may lead to severe cost penalties if the wrong design is used. Here, we investigate the robust economic statistical design (RESD) of the T² chart in an attempt to reduce these cost penalties when there are multiple scenarios. Our method is to employ the genetic algorithm (GA) optimization method to minimize the total expected monitoring cost across all distinct scenarios. We illustrate the effectiveness of the method using two numerical examples. Simulation studies indicate that robust economic statistical designs should be encouraged in practice.     

Constructions of Nested Pairwise Efficiency and Variance Balanced Designs

ABSTRACT

Nested pairwise efficiency and variance balanced designs form a new class of block designs. In this article, two methods of constructing such designs from a symmetric balanced incomplete block design are proposed with some illustrations.     

On the construction of m-associate pbib designs II

Some series of m-associate triangular PBIB designs have been constructed. A table of now three associate designs in the range b, v ≦ 100; r, k ≦ 10 with their average efficiencies has been given. These designs with (v, b, r, k) are new in the sense that the existence of two associate PBIB designs (e.f. Clatworthy (1973), John & Turner (1977), Dey (1978)) with these parameters are not known. The constructions presented herein also yield partially balanced weighing designs, nested PBIB designs and PBIB designs for m11111 response exoeriments.     

On Second-Order A-, D- and E-Minimax Designs for Estimating Slopes in Extrapolation and Restricted Interpolation Regions

Summary

The concepts of D-, A- and E-minimax optimality criteria of designs for estimating the slopes of a response surface are considered for situations where the region of interest may not be identical to the experimental region. Optimal second-order designs are derived for the situation where the experimental region and the region of interest are both hyperspherical with a common centre. The dependence of the optimal design on the relative sizes of the regions is investigated. Further, the perfomance of designs optimal for one region in estimating slopes in other regions is also examined.     

Construction of neighbor designs of block size 4 for all values of v ≥ 5 by using the method of addition

In this article, a general method of construction of neighbor block designs is given. The designs are constructed using variation of a simple method which we refer to as the method of addition (renamed as the method of cyclic shifts). We give complete solution of neighbor balanced designs for k = 4 for any value of v. We also give many series of generalized neighbor designs (GNDs). In the last section, we have constructed GNDs in a sequential manner (as Did John 1981) for v ≤ 50 and r is multiple of k.     

Block designs for incomplete factorial treatment structures with two factors

Abstract

In this paper, the problem of obtaining efficient block designs for incomplete factorial treatment structure with two factors excluding one treatment combination for estimation of dual versus single treatment contrasts is considered. The designs have been obtained using the A-optimal completely randomized designs and modified strongest treatment interchange algorithm. A catalog of efficient block designs has been prepared for m₁?=?3, 4 and m₂?=?2, b?≤?10 and k?≤?9 and for m₁?=?3,4 and m₂?=?3, 4, b?≤?10 and k?≤?10.     

Using orthogonal array for constructing three-level search designs

We consider the problem of constructing search designs for 3^m factorial designs. By using projection properties of some three-level orthogonal arrays, some search designs are obtained for 3 ? m ? 11. The new obtained orthogonal search designs are capable of searching and identifying up to four two-factor interactions and estimating them along with the general mean and main effects. The resulted designs have very high searching probabilities; it means that besides the well-known orthogonal structure, they have high ability in searching the true effects.     

Optimal blocked main effects plans

In this paper, we consider the construction of optimal blocked main effects designs where m two-level factors are to be studied in N runs which are partitioned into b blocks of equal size. For N ≡ 2±od4 sufficient conditions are derived for a design to be Φ _f optimal among all designs having main effects occurring equally often at their high and low levels within blocks and then this result is extended to the class of all designs for the case when the block size is two. Methods of constructing designs satisfying the sufficient conditions derived are also given.     

Generating generalized cyclic designs with factorial balance

An algorithm for generating paired comparison factorially balanced generalized cyclic designs is described. The algorithm is based upon the 2 ⁿ ? 1 class association scheme defined by Shah (1960) for n-factor experiments. The algorithm is highly successful in achieving its objective. Firstorder designs with block size greater than two can also be obtained using the algorithm.     

Bayesian and maximin optimal designs for heteroscedastic regression models

The authors consider the problem of constructing standardized maximin D‐optimal designs for weighted polynomial regression models. In particular they show that by following the approach to the construction of maximin designs introduced recently by Dette, Haines & Imhof (2003), such designs can be obtained as weak limits of the corresponding Bayesian _q‐optimal designs. They further demonstrate that the results are more broadly applicable to certain families of nonlinear models. The authors examine two specific weighted polynomial models in some detail and illustrate their results by means of a weighted quadratic regression model and the Bleasdale–Nelder model. They also present a capstone example involving a generalized exponential growth model.     

A nonparametric procedure for the analysis of balanced crossover designs

The authors propose nonparametric tests for the hypothesis of no direct treatment effects, as well as for the hypothesis of no carryover effects, for balanced crossover designs in which the number of treatments equals the number of periods p, where p ≥ 3. They suppose that the design consists of n replications of balanced crossover designs, each formed by m Latin squares of order p. Their tests are permutation tests which are based on the n vectors of least squares estimators of the parameters of interest obtained from the n replications of the experiment. They obtain both the exact and limiting distribution of the test statistics, and they show that the tests have, asymptotically, the same power as the F‐ratio test.     

Non binary partially neighbor balanced designs for circular blocks

ABSTRACT

Neighbor designs are recommended for the cases where the performance of treatment is affected by the neighboring treatments as in biometrics and agriculture. In this paper we have constructed two new series of non binary partially neighbor balanced designs for v = 2n and v = 2n+1 number of treatments, respectively. The blocks in the design are non binary and circular but no treatment is ever a neighbor to itself. The designs proposed here are partially balanced in terms of nearest neighbors. No such series are known in the literature.