Non binary partially neighbor balanced designs for circular blocks

ABSTRACT

Neighbor designs are recommended for the cases where the performance of treatment is affected by the neighboring treatments as in biometrics and agriculture. In this paper we have constructed two new series of non binary partially neighbor balanced designs for v = 2n and v = 2n+1 number of treatments, respectively. The blocks in the design are non binary and circular but no treatment is ever a neighbor to itself. The designs proposed here are partially balanced in terms of nearest neighbors. No such series are known in the literature.     

Minimax designs for estimating slopes in a trigonometric regression model

Abstract

Designs for the first order trigonometric regression model over an interval on the real line are considered for the situation where estimation of the slope of the response surface at various points in the factor space is of primary interest. Minimization of the variance of the estimated slope at a point maximized over all points in the region of interest is taken as the design criterion. Optimal designs under the minimax criterion are derived for the situation where the design region and the region of interest are identical and a symmetric “partial cycle”. Some comparisons of the minimax designs with the traditional D- and A-optimal designs are provided. Efficiencies of some exact designs under the minimax criterion are also investigated.     

Construction of incomplete Sudoku square and partially balanced incomplete block designs

Abstract

The present article deals with the study of association among the elements of a Sudoku square. In this direction, we have defined an association scheme and constructed incomplete Sudoku square designs which are capable of studying four explanatory variables and also happen to be the designs for two-way elimination of heterogeneity. Some series of Partially Balanced Incomplete Block (PBIB) designs have also been obtained.     

A Method for Analyzing Supersaturated Designs

ABSTRACT

Analyzing supersaturated designs is challenging because the number of experiments is less than the number of factors. In this article we propose a new contrasts based method to analyze supersaturated designs. The method is discussed and explained through some simulation examples. The performance of the method is evaluated using several known designs from the literature.     

Some new construction of circular weakly balanced repeated measurements designs in periods of two different sizes

Abstract

Balanced repeated measurements designs (RMDs) balance out the residual effects. Williams Latin square designs work as minimal combinatorial balanced as well as variance balanced for RMDs for p (period sizes) = v (number of treatments). If minimal balanced RMDs cannot be constructed for the situations where p must be less than v then weakly balanced RMDs should be preferred. In this article, some generators are developed to generate circular weakly balanced RMDs in periods of two different sizes. To obtain the proposed designs, some construction procedures are also described for some of the cases where we could not develop generators.     

Minimal circular balanced repeated measurement designs in unequal period sizes

Abstract

Repeated measurement designs (RMDs) are widely used in medicine, pharmacology, animal sciences and psychology. In these fields, there are several situations where these designs should be used in periods of different sizes. With the use of RMD, residual effects or carry over effects may arise and balanced RMDs are solution to this problem. In this article, therefore, some infinite series are developed through method of cyclic shifts to obtain circular balanced repeated measurements designs in periods of two different sizes.     

Circular balanced repeated measurement designs in periods of three different sizes

Abstract

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. If there is a restriction on the total number of treatments, some experimental units can receive on the total length of time while some experimental units can remain in the trial, then repeated measurements designs with unequal period sizes should be used. In this article, some infinite series are developed to generate the minimal balanced repeated measurement designs in periods of three different sizes p₁, p₂ and p₃, where 2?≤?p₃?<?p₂ ≤ 10 and p₂?<?p₁.     

Minimax Design for the Difference Between Estimated Responses for the Quadratic Model Over Hypercubic Regions

Abstract

A second-order model involving the intercept and only the pure quadratic terms is considered for regression over hypercubes. Minimization of the variance of the difference between estimated responses at two points, maximized over all pairs of points in the region of interest in factor space, is taken as the design criterion. Optimal design under the minimax criterion is derived and found to be the one which is also simultaneously A-, D-, and E-optimal for the parameters excluding the intercept. The minimax design is compared with other standard designs and is found to perform extremely well.     

Partially efficiency-balanced designs-II

efficiency balanced (£R) and partially efficiency balanced (PEB) designs were studied hy Calinski (1971) and Puri and Higam (1971, 1977a). In tais paper we have studied the dual desinas of two classes of PEB designs. It is shown that the dual of any symmetrical PCS design with HN'=N'H is again a PEB design. Also the dual of a PEB(S) with μ₁ = 0 μ₂ = 0and is shown to the again a PEB(S). The relations between PEB designs and linked and partially linked blocks have heen established. As a conseguence, the analysis of linked Mock and partially linkei block designs can he sinrlififid. Sore useful classes of supplencntcd block designs having simple analysis have also been discussed.     

Some new third order designs robust to one missing observation

Abstract

In real experimentation, we often face situations where observations are lost, ignored or unavailable due to some accident or high cost experiments. Missing observations can make the results of a response surface experiment quite misleading. Therefore minimaxloss designs for Augmented Box-Behnken Designs (ABBDs) and Augmented Fractional Box-Behnken Designs (AFBBDs) are formulated under a minimaxloss criterion. These minimaxloss designs are considered to be robust to one missing observation and the investigation has been made in this article. Then G-efficiencies and Relative D-efficiencies of minimaxloss ABBDs and AFBBDs have been discussed.     

Construction of repeated measurements designs strongly balanced for residual effects

Abstract

Repeated Measurements Designs have been widely used in agriculture, animal husbandry, education, biology, botany and engineering. Balanced or strongly balanced repeated measurements designs are useful to balance out the residual effects. In this article, some new generators and construction procedures are proposed to obtain circular strongly balanced repeated measurements designs in periods of (a) equal sizes, (b) two different sizes, and (c) three different sizes.     

Sure independence screening for analyzing supersaturated designs

ABSTRACT

Supersaturated designs (SSDs) constitute a large class of fractional factorial designs which can be used for screening out the important factors from a large set of potentially active ones. A major advantage of these designs is that they reduce the experimental cost dramatically, but their crucial disadvantage is the confounding involved in the statistical analysis. Identification of active effects in SSDs has been the subject of much recent study. In this article we present a two-stage procedure for analyzing two-level SSDs assuming a main-effect only model, without including any interaction terms. This method combines sure independence screening (SIS) with different penalty functions; such as Smoothly Clipped Absolute Deviation (SCAD), Lasso and MC penalty achieving both the down-selection and the estimation of the significant effects, simultaneously. Insights on using the proposed methodology are provided through various simulation scenarios and several comparisons with existing approaches, such as stepwise in combination with SCAD and Dantzig Selector (DS) are presented as well. Results of the numerical study and real data analysis reveal that the proposed procedure can be considered as an advantageous tool due to its extremely good performance for identifying active factors.     

Construction of minimum aberration blocked two-level regular factorial designs

ABSTRACT

In this article, we consider the construction of minimum aberration 2^{n ? k}: 2^p designs with respect to some existing combined wordlength patterns, where a 2^{n ? k}: 2^p design is a blocked two-level design with n treatment factors, 2^p blocks, and N = 2^q runs with q = n ? k. Two methods are proposed for two situations: n ? 2^{q ? p} ? 1 and n > N/2. These methods enable us to obtain some new minimum aberration 2^{n ? k}: 2^p designs from existing minimum aberration unblocked and blocked designs. Examples are included to illustrate the theory.     

Optimal designs for the Michaelis–Menten model with correlated observations

In this paper we investigate the problem of designing experiments for generalized least-squares analysis in the Michaelis–Menten model. We study the structure of exact D-optimal designs in a model with an autoregressive error structure. Explicit results for locally D-optimal designs are derived for the case where two observations can be taken per subject. Additionally standardized maximin D-optimal designs are obtained in this case. The results illustrate the enormous difficulties to find exact optimal designs explicitly for nonlinear regression models with correlated observations.     

Families of proper generalized neighbor designs

A generalized neighbor design relaxes the equality condition on the number of times two treatments occur as neighbors in the design. In this article we have constructed a new series of generalized neighbor designs with equal block sizes, a series of neighbor designs of Rees [1967. Some designs of use in serology. Biometrics 23, 779–791] and a series of neighbor designs with two distinct block sizes. Two more new series of GN₂ designs are also constructed for even number of treatments. It has been shown that quasi neighbor designs introduced by Preece [1994. Balanced Ouchterlony neighbor designs. J. Combin. Math. Combin. Comput. 15, 197–219] are special cases of generalized neighbor designs with t=2$t=2$. All the designs given here are binary. A new definition—partially balanced circuit design is introduced which is a special case of generalized neighbor designs with binary blocks.     

D-minimax Second-order Designs Over Hypercubes for Extrapolation and Restricted Interpolation Regions

The D-minimax criterion for estimating slopes of a response surface involving k factors is considered for situations where the experimental region χ and the region of interest ? are co-centered cubes but not necessarily identical. Taking χ = [ ? 1, 1]^k and ? = [ ? R, R]^k, optimal designs under the criterion for the full second-order model are derived for various values of R and their relative performances investigated. The asymptotically optimal design as R → ∞ is also derived and investigated. In addition, the optimal designs within the class of product designs are obtained. In the asymptotic case it is found that the optimal product design is given by a solution of a cubic equation that reduces to a quadratic equation for k = 3?and?6. Relative performances of various designs obtained are examined. In particular, the optimal asymptotic product design and the traditional D-optimal design are compared and it is found that the former performs very well.     

A note on the nonexistence of the constant block-sum balanced incomplete block designs

Abstract

Due to important practical applications and considerations in biomedical clinical trials, fixed block-sum designs are of interest. We show that in general, the constant block-sum balanced incomplete block designs do not exist.     

Foldover Conference Designs for Screening Experiments

A conference matrix is a square matrix C with zeros on the diagonal and ±1s off the diagonal, such that C ^T C = CC ^T  = (n ? 1)I, where I is the identity matrix. Conference matrices are an important class of combinatorial designs due to their many applications in several fields of science, including statistical-experimental designs, telecommunications, elliptic geometry, and more. In this article, conference matrices and their full foldover design are combined together to obtain an alternative method for screening active factors in complicated problems. This method provides a model-independent estimate of the set of active factors and also gives a linearity test for the underlying model.     

Multilevel Augmented Pairs Second-Order Response Surface Designs and Their Robustness to Missing Data

Missing observations can occur even in a well-planned experiment. The effect of missing observations can be much more serious when the design is saturated or near saturated. The levels of factor settings that make a design more robust to missing observations are of great importance in the sense that the loss for missing observations becomes minimum. In this study, new augmented pairs minimax loss designs are constructed, which are more robust to one missing design point than the augmented pairs designs presented by Morris (2000 Morris , M. D. ( 2000 ). A class of three-level experimental designs for response surface modeling . Technometrics 42 : 111 – 121 .[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]). New designs are compared with augmented pairs designs, central composite designs, and small composite designs under generalized scaled standard deviations. The model used is also studied for the regression coefficient estimates.     

Split-plot designs with mirror image pairs as sub-plots

In this article we investigate two-level split-plot designs where the sub-plots consist of only two mirror image trials. Assuming third and higher order interactions negligible, we show that these designs divide the estimated effects into two orthogonal sub-spaces, separating sub-plot main effects and sub-plot by whole-plot interactions from the rest. Further we show how to construct split-plot designs of projectivity P≥3. We also introduce a new class of split-plot designs with mirror image pairs constructed from non-geometric Plackett-Burman designs. The design properties of such designs are very appealing with effects of major interest free from full aliasing assuming that 3rd and higher order interactions are negligible.