空间回归模型选择的反思

空间计量经济学存在两种最基本的模型:空间滞后模型和空间误差模型,这里旨在重新思考和探讨这两种空间回归模型的选择,结论为:Moran’s I指数可以用来判断回归模型后的残差是否存在空间依赖性;在实证分析中,采用拉格朗日乘子检验判断两种模型优劣是最常见的做法。然而,该检验仅仅是基于统计推断而忽略了理论基础,因此,可能导致选择错误的模型;在实证分析中,空间误差模型经常被选择性遗忘,而该模型的适用性较空间滞后模型更为广泛;实证分析大多缺乏空间回归模型设定的探讨,Anselin提出三个统计量,并且,如果模型设定正确,应该遵从Wald统计量>Log likelihood统计量>LM统计量的排列顺序。     

Multivariate modelling of spatial extremes based on copulas

To model extreme spatial events, a general approach is to use the generalized extreme value (GEV) distribution with spatially varying parameters such as spatial GEV models and latent variable models. In the literature, this approach is mostly used to capture spatial dependence for only one type of event. This limits the applications to air pollutants data as different pollutants may chemically interact with each other. A recent advancement in spatial extremes modelling for multiple variables is the multivariate max-stable processes. Similarly to univariate max-stable processes, the multivariate version also assumes standard distributions such as unit-Fréchet as margins. Additional modelling is required for applications such as spatial prediction. In this paper, we extend the marginal methods such as spatial GEV models and latent variable models into a multivariate setting based on copulas so that it is capable of handling both the spatial dependence and the dependence among multiple pollutants. We apply our proposed model to analyse weekly maxima of nitrogen dioxide, sulphur dioxide, respirable suspended particles, fine suspended particles, and ozone collected in Pearl River Delta in China.     

An Applied Comparison of Area-Level Linear Mixed Models in Small Area Estimation

This article reviews four area-level linear mixed models that borrow strength by exploiting the possible correlation among the neighboring areas or/and past time periods. Its main goal is to study if there are efficiency gains when a spatial dependence or/and a temporal autocorrelation among random-area effects are included into the models. The Fay–Herriot estimator is used as benchmark. A design-based simulation study based on real data collected from a longitudinal survey conducted by a statistical office is presented. Our results show that models that explore both spatial and chronological association considerably improve the efficiency of small area estimates.     

环境库兹涅茨曲线研究——基于生活污染和空间计量方法

环境库兹涅茨曲线是环境经济学中的一个经典假说,大部分的研究假定污染排放不受相邻国家或地区的影响。基于中国1998—2007年省级生活污染排放数据,使用空间计量方法对EKC模型进行实证分析,结果显示：中国生活污染排放的空间依赖关系并不显著;同时,人均生活污水、人均生活污水中COD和人均生活SO2排放量与人均GDP之间为“倒U型”曲线关系,人均生活烟尘排放量与人均GDP之间为“倒N型”曲线关系,这说明就生活染污而言,中国的经济发展与环境改善是相互协调的。     

Double Generalized Spatial Econometric Models

The authors offer a unified method extending traditional spatial dependence with normally distributed error terms to a new class of spatial models based on the biparametric exponential family of distributions. Joint modeling of the mean and variance (or precision) parameters is proposed in this family of distributions, including spatial correlation. The proposed models are applied for analyzing Colombian land concentration, assuming that the variable of interest follows normal, gamma, and beta distributions. In all cases, the models were fitted using Bayesian methodology with the Markov Chain Monte Carlo (MCMC) algorithm for sampling from joint posterior distribution of the model parameters.     

空间自回归模型的局部影响分析和运用

由于空间数据的相依特性，使得通常的删除点诊断异常值的方法不适合采用。为了寻找数据中的异常点和影响点，采用局部影响分析技术，通过引入扰动的方法来发现影响点，最后通过实例说明局部影响分析技术能够有效地发现模型中可能的影响点，并且能够揭示更多的细节信息。     

Small Area Estimation via Multivariate Fay–Herriot Models with Latent Spatial Dependence

The Fay–Herriot model is a standard model for direct survey estimators in which the true quantity of interest, the superpopulation mean, is latent and its estimation is improved through the use of auxiliary covariates. In the context of small area estimation, these estimates can be further improved by borrowing strength across spatial regions or by considering multiple outcomes simultaneously. We provide here two formulations to perform small area estimation with Fay–Herriot models that include both multivariate outcomes and latent spatial dependence. We consider two model formulations. In one of these formulations the outcome‐by‐space dependence structure is separable. The other accounts for the cross dependence through the use of a generalized multivariate conditional autoregressive (GMCAR) structure. The GMCAR model is shown, in a state‐level example, to produce smaller mean square prediction errors, relative to equivalent census variables, than the separable model and the state‐of‐the‐art multivariate model with unstructured dependence between outcomes and no spatial dependence. In addition, both the GMCAR and the separable models give smaller mean squared prediction error than the state‐of‐the‐art model when conducting small area estimation on county level data from the American Community Survey.     

Hierarchical Bayesian bivariate disease mapping: analysis of children and adults asthma visits to hospital

In spatial epidemiology, detecting areas with high ratio of disease is important as it may lead to identifying risk factors associated with disease. This in turn may lead to further epidemiological investigations into the nature of disease. Disease mapping studies have been widely performed with considering only one disease in the estimated models. Simultaneous modelling of different diseases can also be a valuable tool both from the epidemiological and also from the statistical point of view. In particular, when we have several measurements recorded at each spatial location, one can consider multivariate models in order to handle the dependence among the multivariate components and the spatial dependence between locations. In this paper, spatial models that use multivariate conditionally autoregressive smoothing across the spatial dimension are considered. We study the patterns of incidence ratios and identify areas with consistently high ratio estimates as areas for further investigation. A hierarchical Bayesian approach using Markov chain Monte Carlo techniques is employed to simultaneously examine spatial trends of asthma visits by children and adults to hospital in the province of Manitoba, Canada, during 2000–2010.     

Bayesian joint modeling of correlated counts data with application to adverse birth outcomes

In disease mapping, health outcomes measured at the same spatial locations may be correlated, so one can consider joint modeling the multivariate health outcomes accounting for their dependence. The general approaches often used for joint modeling include shared component models and multivariate models. An alternative way to model the association between two health outcomes, when one outcome can naturally serve as a covariate of the other, is to use ecological regression model. For example, in our application, preterm birth (PTB) can be treated as a predictor for low birth weight (LBW) and vice versa. Therefore, we proposed to blend the ideas from joint modeling and ecological regression methods to jointly model the relative risks for LBW and PTBs over the health districts in Saskatchewan, Canada, in 2000–2010. This approach is helpful when proxy of areal-level contextual factors can be derived based on the outcomes themselves when direct information on risk factors are not readily available. Our results indicate that the proposed approach improves the model fit when compared with the conventional joint modeling methods. Further, we showed that when no strong spatial autocorrelation is present, joint outcome modeling using only independent error terms can still provide a better model fit when compared with the separate modeling.     

Analyzing dependence in incidence of diabetes and heart problem using generalized bivariate geometric models with covariates

For analyzing incidence data on diabetes and health problems, the bivariate geometric probability distribution is a natural choice but remained unexplored largely due to lack of models linking covariates with the probabilities of bivariate incidence of correlated outcomes. In this paper, bivariate geometric models are proposed for two correlated incidence outcomes. The extended generalized linear models are developed to take into account covariate dependence of the bivariate probabilities of correlated incidence outcomes for diabetes and heart diseases for the elderly population. The estimation and test procedures are illustrated using the Health and Retirement Study data. Two models are shown in this paper, one based on conditional-marginal approach and the other one based on the joint probability distribution with an association parameter. The joint model with association parameter appears to be a very good choice for analyzing the covariate dependence of the joint incidence of diabetes and heart diseases. Bootstrapping is performed to measure the accuracy of estimates and the results indicate very small bias.     

Variational Bayes for estimating the parameters of a hidden Potts model

Hidden Markov random field models provide an appealing representation of images and other spatial problems. The drawback is that inference is not straightforward for these models as the normalisation constant for the likelihood is generally intractable except for very small observation sets. Variational methods are an emerging tool for Bayesian inference and they have already been successfully applied in other contexts. Focusing on the particular case of a hidden Potts model with Gaussian noise, we show how variational Bayesian methods can be applied to hidden Markov random field inference. To tackle the obstacle of the intractable normalising constant for the likelihood, we explore alternative estimation approaches for incorporation into the variational Bayes algorithm. We consider a pseudo-likelihood approach as well as the more recent reduced dependence approximation of the normalisation constant. To illustrate the effectiveness of these approaches we present empirical results from the analysis of simulated datasets. We also analyse a real dataset and compare results with those of previous analyses as well as those obtained from the recently developed auxiliary variable MCMC method and the recursive MCMC method. Our results show that the variational Bayesian analyses can be carried out much faster than the MCMC analyses and produce good estimates of model parameters. We also found that the reduced dependence approximation of the normalisation constant outperformed the pseudo-likelihood approximation in our analysis of real and synthetic datasets.     

Non‐stationary Cross‐Covariance Models for Multivariate Processes on a Globe

Abstract. In geophysical and environmental problems, it is common to have multiple variables of interest measured at the same location and time. These multiple variables typically have dependence over space (and/or time). As a consequence, there is a growing interest in developing models for multivariate spatial processes, in particular, the cross‐covariance models. On the other hand, many data sets these days cover a large portion of the Earth such as satellite data, which require valid covariance models on a globe. We present a class of parametric covariance models for multivariate processes on a globe. The covariance models are flexible in capturing non‐stationarity in the data yet computationally feasible and require moderate numbers of parameters. We apply our covariance model to surface temperature and precipitation data from an NCAR climate model output. We compare our model to the multivariate version of the Matérn cross‐covariance function and models based on coregionalization and demonstrate the superior performance of our model in terms of AIC (and/or maximum loglikelihood values) and predictive skill. We also present some challenges in modelling the cross‐covariance structure of the temperature and precipitation data. Based on the fitted results using full data, we give the estimated cross‐correlation structure between the two variables.     

On the performance of two clustering methods for spatial functional data

The performance of two clustering strategies for spatially correlated functional data based on the same measure of spatial dependence is examined and compared. In particular, the role of the spatial dependence computed by the trace-variogram function is analyzed. The main features of both procedures is shown through a simulation study based on a variety of practical scenarios easily encountered in the analysis of spatial functional data. An application on real data based on salinity curves is also presented.     

A simulation comparison on spatial Poisson mixed models

The statistical methods for analyzing spatial count data have often been based on random fields so that a latent variable can be used to specify the spatial dependence. In this article, we introduce two frequentist approaches for estimating the parameters of model-based spatial count variables. The comparison has been carried out by a simulation study. The performance is also evaluated using a real dataset and also by the simulation study. The simulation results show that the maximum likelihood estimator appears to be with the better sampling properties.     

SAR模型在省域和县域农民收入中的应用研究

 本文利用各省财政农业人均支出、农村人均用电量作为解释变量，建立了农民人均收入空间自回归(SAR)模型。模型数据分析表明：我国农民人均收入存在明显的空间自相关现象，它反映了省际农民收入存在聚集效应；农民人均收入对财政农业人均支出、农村人均用电量存在明显的空间依赖性；财政农业支出对农民增收产生积极的正面影响，农村用电量是衡量农民收入水平的重要有效指标。考虑到省际间差异可能太大，文章还对福建省67个县市进行了同样的问题研究，并得出了相似的结论。     

Likelihood Inference for Spatial Generalized Linear Mixed Models

Spatial modeling is widely used in environmental sciences, biology, and epidemiology. Generalized linear mixed models are employed to account for spatial variations of point-referenced data called spatial generalized linear mixed models (SGLMMs). Frequentist analysis of these type of data is computationally difficult. On the other hand, the advent of the Markov chain Monte Carlo algorithm has made the Bayesian analysis of SGLMM computationally convenient. Recent introduction of the method of data cloning, which leads to maximum likelihood estimate, has made frequentist analysis of mixed models also equally computationally convenient. Recently, the data cloning was employed to estimate model parameters in SGLMMs, however, the prediction of spatial random effects and kriging are also very important. In this article, we propose a frequentist approach based on data cloning to predict (and provide prediction intervals) spatial random effects and kriging. We illustrate this approach using a real dataset and also by a simulation study.     

A close look at the spatial structure implied by the CAR and SAR models

Modeling spatial interactions that arise in spatially referenced data is commonly done by incorporating the spatial dependence into the covariance structure either explicitly or implicitly via an autoregressive model. In the case of lattice (regional summary) data, two common autoregressive models used are the conditional autoregressive model (CAR) and the simultaneously autoregressive model (SAR). Both of these models produce spatial dependence in the covariance structure as a function of a neighbor matrix W and often a fixed unknown spatial correlation parameter. This paper examines in detail the correlation structures implied by these models as applied to an irregular lattice in an attempt to demonstrate their many counterintuitive or impractical results. A data example is used for illustration where US statewide average SAT verbal scores are modeled and examined for spatial structure using different spatial models.     

Spatial model fitting for large datasets with applications to climate and microarray problems

Many problems in the environmental and biological sciences involve the analysis of large quantities of data. Further, the data in these problems are often subject to various types of structure and, in particular, spatial dependence. Traditional model fitting often fails due to the size of the datasets since it is difficult to not only specify but also to compute with the full covariance matrix describing the spatial dependence. We propose a very general type of mixed model that has a random spatial component. Recognizing that spatial covariance matrices often exhibit a large number of zero or near-zero entries, covariance tapering is used to force near-zero entries to zero. Then, taking advantage of the sparse nature of such tapered covariance matrices, backfitting is used to estimate the fixed and random model parameters. The novelty of the paper is the combination of the two techniques, tapering and backfitting, to model and analyze spatial datasets several orders of magnitude larger than those datasets typically analyzed with conventional approaches. Results will be demonstrated with two datasets. The first consists of regional climate model output that is based on an experiment with two regional and two driver models arranged in a two-by-two layout. The second is microarray data used to build a profile of differentially expressed genes relating to cerebral vascular malformations, an important cause of hemorrhagic stroke and seizures.     

A joint modeling approach for spatial earthquake risk variations

Modeling spatial patterns and processes to assess the spatial variations of data over a study region is an important issue in many fields. In this paper, we focus on investigating the spatial variations of earthquake risks after a main shock. Although earthquake risks have been extensively studied in the literatures, to our knowledge, there does not exist a suitable spatial model for assessing the problem. Therefore, we propose a joint modeling approach based on spatial hierarchical Bayesian models and spatial conditional autoregressive models to describe the spatial variations in earthquake risks over the study region during two periods. A family of stochastic algorithms based on a Markov chain Monte Carlo technique is then performed for posterior computations. The probabilistic issue for the changes of earthquake risks after a main shock is also discussed. Finally, the proposed method is applied to the earthquake records for Taiwan before and after the Chi-Chi earthquake.     

Modelling concurrency of events in on-line auctions via spatiotemporal semiparametric models

Summary.  We introduce a semiparametric approach for modelling the effect of concurrent events on an outcome of interest. Concurrency manifests itself as temporal and spatial dependences. By temporal dependence we mean the effect of an event in the past. Modelling this effect is challenging since events arrive at irregularly spaced time intervals. For the spatial part we use an abstract notion of 'feature space' to conceptualize distances among a set of item features. We motivate our model in the context of on-line auctions by modelling the effect of concurrent auctions on an auction's price. Our concurrency model consists of three components: a transaction-related component that accounts for auction design and bidding competition, a spatial component that takes into account similarity between item features and a temporal component that accounts for recently closed auctions. To construct each of these we borrow ideas from spatial and mixed model methodology. The power of this model is illustrated on a large and diverse set of laptop auctions on eBay.com. We show that our model results in superior predictive performance compared with a set of competitor models. The model also allows for new insight into the factors that drive price in on-line auctions and their relationship to bidding competition, auction design, product variety and temporal learning effects.