Maximum latency scheduling problem on two-person cooperative games

This paper studies a two-person cooperative game in which a set of jobs has to be processed jointly by two people. Each of them has a single machine and his processing cost is defined as the minimum value of the maximum latency of his negotiably assigned jobs. The objective is to maximize the multiplication of their rational positive cooperative profits. In the case where all jobs have the same processing time, if they have a common due date, the problem is polynomial-time solvable; if due dates can be different, there exits an optimal schedule in which the jobs assigned to each person are scheduled in Earlier Due Date first (EDD) order and a polynomial-time dynamic programming is further proposed. In the case where processing times can be different, the NP-completeness of this problem is proved, and a pseudo-polynomial-time dynamic programming algorithm is developed.     

混合离散差分进化算法在单机批处理调度中的应用

本文研究单机批处理调度问题,批处理机有批次容量限制,批处理时间由每个批次所含作业中的最长作业处理时间决定。每个作业具有不同的大小、处理时间、提前拖期惩罚权重,所有作业具有公共交货期,且交货期无限晚。目标函数为最小化所有作业的加权提前拖期惩罚之和。该问题已被证明为NP难题,本研究找到了其最优解具有的一些性质,在此基础上利用它们提出了一种动态规划(DP)与差分进化(DE)算法相结合的混合离散差分进化(HDDE)算法来求解该问题,通过与传统的遗传算法、模拟退火算法和迭代贪婪算法进行对比,HDDE算法显示了更加强大的全局搜索能力。     

MINIMIZING ABSOLUTE AND SQUARED DEVIATION OF COMPLETION TIMES FROM DUE DATES

This is a study of a single-machine scheduling problem with the objective of minimizing the sum of a function of earliness and tardiness called the earliness and tardiness (ET) problem. I will show that if priority weights of jobs are proportional to their processing times, and if earliness and tardiness cost functions are linear, the problem will be equivalent to the total weighted tardiness problem. This proves that the et problem is np -hard. In addition, I present a heuristic algorithm with worst case bound for the et problem based on the equivalence relation between the two. When earliness and tardiness cost functions are quadratic, I consider the problem for a common due date for all jobs and for different job due dates. In general, the et problem with quadratic earliness and tardiness cost functions and all job weights equal to one is np -hard. I show that in many cases, when weights of jobs are proportional to their processing times, the problem can be solved efficiently. In the published results on the et problem with quadratic earliness and tardiness cost functions other researchers have assumed a zero starting time for the schedule. I discuss the advantages of a nonzero starting time for the schedule.     

A FRAMEWORK FOR MACHINE SCHEDULING PROBLEMS WITH CONTROLLABLE PROCESSING TIMES

This is a study of single and parallel machine scheduling problems with controllable processing time for each job. The processing time for job j depends on the position of the job in the schedule and is a function of the number of resource units allocated to its processing. Processing time functions and processing cost functions are allowed to be nonlinear. The scheduling problems considered here have important applications in industry and include many of the existing scheduling models as special cases. For the single machine problem, the objective is minimization of total compression costs plus a scheduling measure. The scheduling measures include makespan, total flow time, total differences in completion times, total differences in waiting times, and total earliness and tardiness with a common due date for all jobs. Except when the total earliness and tardiness measure is involved, each case the problem is solved efficiently. Under an assumption typically satisfied in just-in-time systems, the problem with total earliness and tardiness measure is also solved efficiently. Finally, for a large class of processing time functions; parallel machine problems with total flow time and total earliness and tardiness measures are solved efficiently. In each case we reduce the problem to a transportation problem.     

Non-resumable scheduling on a single bounded parallel-batch machine with periodic maintenance

We consider the problem of scheduling a set of jobs with different processing times and sizes on a single bounded parallel-batch machine with periodic maintenance. Because the machine is in batch-processing model and the capacity is fixed, several jobs can be processed simultaneously in a batch provided that the total size of the jobs in the batch doesn’t exceed the machine capacity. And the processing time of a batch is the largest processing time of the jobs contained in the batch. Meanwhile, the production of each batch is non-resumable, that is, if a batch cannot be completed processing before some maintenance, that batch needs to be processed anew once the machine returns available. Our goal is to minimize the makespan. We first consider two special cases where the jobs have the same sizes or the same processing times, both of which are strongly NP-hard. We present two different approximation algorithms for them and show that these two algorithms have the same tight worst-case ratio of 2. We then consider the general case where the jobs have the arbitrary processing times and arbitrary sizes, for which we propose a 17/5-approximation algorithm.

     

On the integration of due date setting and order release control

This paper calls for a paradigm shift in the production control literature away from assuming due date setting and order release are two independent decision levels. When order release is controlled, jobs do not enter the shop floor directly but are retained in a pre-shop pool and released to meet certain performance targets. This makes the setting of accurate planned release dates – the point at which jobs transition from the pool to the shop floor – a key consideration when setting due dates. We develop a new approach to estimating planned release dates to be embedded in the Workload Control (WLC) concept. Our approach is unique as it anticipates the release decision as part of the due date setting procedure. This makes a second independent release decision superfluous and avoids a major cause of tardiness – deviations between (i) the planned release date used when calculating the delivery time allowance and (ii) the actual, realised release date. Simulation is used to compare the performance of WLC using two decision levels with the new single-level approach where the release decision is anticipated when setting the due date. Performance improvements are shown to be robust to uncertainty in processing time estimates.     

Customer order scheduling to minimize total weighted completion time

In this paper we study the scheduling problem in which each customer order consists of several jobs of different types, which are to be processed on m facilities. Each facility is dedicated to the processing of only one type of jobs. All jobs of an order have to be delivered to the customer at the same time. The objective is to schedule all the orders to minimize the total weighted order completion time. While the problem has been shown to be unary NP-hard, we develop a heuristics to tackle the problem and analyze its worst-case performance.     

考虑分时电价的多目标批调度问题蚁群算法求解

对同时优化电力成本和制造跨度的多目标批处理机调度问题进行了研究,设计了两种多目标蚁群算法,基于工件序的多目标蚁群算法(J-PACO,Job-based Pareto Ant Colony Optimization)和基于成批的多目标蚁群算法(B-PACO,Batch-based Pareto Ant Colony Optimization)对问题进行求解分析。由于分时电价中电价是时间的函数,因而在传统批调度进行批排序的基础上,需要进一步确定批加工时间点以测定电力成本。提出的两种蚁群算法分别将工件和批与时间线相结合进行调度对此类问题进行求解。通过仿真实验将两种算法对问题的求解进行了比较,仿真实验表明B-PACO算法通过结合FFLPT(First Fit Longest Processing Time)启发式算法先将工件成批再生成最终方案,提高了算法搜索效率,并且在衡量算法搜索非支配解数量的Q指标和衡量非支配集与Pareto边界接近程度的HV指标上,均优于J-PACO算法。     

New results on two-machine flow-shop scheduling with rejection

In this paper, we consider the off-line and on-line two-machine flow-shop scheduling problems with rejection. The objective is to minimize the sum of the makespan of accepted jobs and the total rejection penalty of rejected jobs. For the off-line version, Shabtay and Gasper (Comput Oper Res 39:1087–1096, 2012) showed that this problem is NP-hard and then provided a pseudo-polynomial-time algorithm, two 2-approximation algorithms and a fully polynomial-time approximation scheme. We further study some special cases in this paper. We show that this problem is still NP-hard even when all jobs have the same processing time on one of the machines or all jobs have the same rejection penalty. Furthermore, we also showed that this problem can be solved in polynomialtime algorithm when all jobs satisfy the agreeable condition on their processing times and rejection penalties. For the on-line version without rejection, Chen and Woeginger [in: Du DZ, Pardalos PM (eds.) Minimax and Applications, 1995] showed that the competitive ratio of any determined on-line algorithm is at least 2. We further show that the competitive ratio of any determined on-line algorithm is at least 2 even when all jobs have the same processing time on the first machine. Finally, for the on-line version with rejection, we present a class of on-line algorithms with the best-possible competitive ratio 2.     

Scheduling a single semi-continuous batching machine

This paper addresses a new problem, called semi-continuous batch scheduling, which arises in the heating-operation of tube-billets in the steel industry. Each heating furnace can be regarded as a semi-continuous batching machine, which can handle up to C jobs simultaneously. The jobs in the same batch enter and leave the machine semi-continuously, which differs from the traditional batching machine scheduling where the jobs in same batch have a starting time and a finishing time. In this paper the processing time of a batch depends on the capacity of the semi-continuous batching machine, the longest processing time of jobs in the batch and its size. The objectives are to schedule jobs on the machine so that the makespan and the total completion time are minimized. A schedule for a semi-continuous batching machine consists of a batching and sequencing for the batches. We propose the optimal properties of two different objective functions and present the different dynamic programming algorithms with a running time of O(n²), respectively.     

Event-driven production scheduling in SME

One common problem among Small and Medium Enterprises (SME) is to don’t have at disposal formal and simple approaches for production scheduling, especially in case of an event that introduces the requirement of a re-planning. The paper approaches this kind of event-driven re-scheduling problems at the arrival of a new order, when some jobs are under processing, some operation have already finished and other jobs are waiting to be loaded on a machine. For a simple application in a SME, to the operations already started and completed for a job a processing time equal to zero is assigned; the operations already started but not yet completed are interrupted and considered as operations that must be executed for the remaining part of their processing time; all the other jobs are considered for the event-driven job-shop re-scheduling problem. A validation of the procedure in a realistic application is presented.     

A PTAS for Semiconductor Burn-in Scheduling

In this paper a polynomial time approximation scheme, PTAS for short, is presented for the problem of scheduling jobs in a batch processing system. Each job has a pre-defined release date, which indicates when the job is available, and a pre-defined burn-in time, which is the least time needed for processing the job. At one time, at most B jobs can be processed together, where B is a pre-given number. No preemption is permitted.Research supported in part by an RGC CERG grant [CityU 1081/02E] and a grant from CityU [7001347].Supported by the fund from NSFC under grant numbers 10271065 and 60373025.     

Scheduling dedicated jobs with variative processing times

We consider the following optimization problem. There is a set of \(n\) dedicated jobs that are to be processed on \(m\) parallel machines. The job set is partitioned into subsets and jobs of each subset have a common due date. Processing times of jobs are interconnected and they are the subject of the decision making. The goal is to choose a processing time for each job in a feasible way and to construct a schedule that minimizes the maximum lateness. We show that the problem is NP-hard even if \(m=1\) and that it is NP-hard in the strong sense if \(m\) is a variable. We prove that there is no approximate polynomial algorithm with guaranteed approximation ratio less than 2. We propose an integer linear formulation for the problem and perform experiments. The experiments show that the solutions obtained with CPLEX within the limit of 5 min are on average about 5 % from the optimum value for instances with up to 150 jobs, 16 subsets and 11 machines. Most instances were solved to optimality and the average CPLEX running time was 32 s for these instances.     

Approximation algorithm for the parallel-machine scheduling problem with release dates and submodular rejection penalties

In this paper, we consider the parallel-machine scheduling problem with release dates and submodular rejection penalties. In this problem, we are given m identical parallel machines and n jobs. Each job has a processing time and a release date. A job is either rejected, in which case a rejection penalty has to be paid, or accepted and processed on one of the m identical parallel machines. The objective is to minimize the sum of the makespan of the accepted jobs and the rejection penalty of the rejected jobs which is determined by a submodular function. Our main work is to design a 2-approximation algorithm based on the primal-dual framework.

     

Scheduling in an assembly-type production chain with batch transfer

This paper addresses a three-machine assembly-type flowshop scheduling problem, which frequently arises from manufacturing process management as well as from supply chain management. Machines one and two are arranged in parallel for producing component parts individually, and machine three is an assembly line arranged as the second stage of a flowshop for processing the component parts in batches. Whenever a batch is formed on the second-stage machine, a constant setup time is required. The objective is to minimize the makespan. In this study we establish the strong NP-hardness of the problem for the case where all the jobs have the same processing time on the second-stage machine. We then explore a useful property, based upon which a special case can be optimally solved in polynomial time. We also study several heuristic algorithms to generate quality approximate solutions for the general problem. Computational experiments are conducted to evaluate the effectiveness of the algorithms.     

Just-in-time scheduling with controllable processing times on parallel machines

We study scheduling problems with controllable processing times on parallel machines. Our objectives are to maximize the weighted number of jobs that are completed exactly at their due date and to minimize the total resource allocation cost. We consider four different models for treating the two criteria. We prove that three of these problems are NP\mathcal{NP} -hard even on a single machine, but somewhat surprisingly, the problem of maximizing an integrated objective function can be solved in polynomial time even for the general case of a fixed number of unrelated parallel machines. For the three NP\mathcal{NP} -hard versions of the problem, with a fixed number of machines and a discrete resource type, we provide a pseudo-polynomial time optimization algorithm, which is converted to a fully polynomial time approximation scheme.     

A Comparison of Due Date Setting,Resource Assignment,and Job Preemption Heuristics for the Multiproject Scheduling Problem*

This research examines a heuristic, rule-based approach for setting due dates in a multiproject, multijob, or assembly shop. Due date estimation is a challenging problem because the operating environment is capacitated, involves the allocation of multiple resources, and allows for the preemption of resources from one project or job to another. The dynamic, continuous arrival of new jobs or orders frequently results in the preemption of resources through the application of managerially determined priority policies. These preemption policies have a significant impact on the ultimate completion time of a job or a project. A three-factor, full-factorial computer simulation experiment is used to assess the relative effectiveness of combinations of four due date setting heuristics, five resource assignment heuristics, and three resource preemption heuristics. Recommendations are made for the selection of due date and resource assignment heuristic combinations under the three preemption policies examined.     

Single machine scheduling problems with subcontracting options

In this paper, we study a scheduling model as follows: there are n jobs which can be processed in house on a single machine or subcontracted to a subcontractor. If a job is subcontracted, its processing cost is different from the in-house cost and its delivery lead time is a stepwise function of the total processing time of outsourced jobs. Two objective functions are studied (1) to minimize the weighted sum of the maximal completion time and the total processing cost and (2) to minimize the weighted sum of the number of tardy jobs and the total processing cost. For the first problem, we prove that it is NP-hard and get a pseudo-polynomial time algorithm. For the second problem, we prove that it is NP-hard and get a pseudo-polynomial time algorithm for a special case.     

Optimal Policy for a Stochastic Scheduling Problem with Applications to Surgical Scheduling

We consider the stochastic, single‐machine earliness/tardiness problem (SET), with the sequence of processing of the jobs and their due‐dates as decisions and the objective of minimizing the sum of the expected earliness and tardiness costs over all the jobs. In a recent paper, Baker ( 2014 ) shows the optimality of the Shortest‐Variance‐First (SVF) rule under the following two assumptions: (a) The processing duration of each job follows a normal distribution. (b) The earliness and tardiness cost parameters are the same for all the jobs. In this study, we consider problem SET under assumption (b). We generalize Baker's result by establishing the optimality of the SVF rule for more general distributions of the processing durations and a more general objective function. Specifically, we show that the SVF rule is optimal under the assumption of dilation ordering of the processing durations. Since convex ordering implies dilation ordering (under finite means), the SVF sequence is also optimal under convex ordering of the processing durations. We also study the effect of variability of the processing durations of the jobs on the optimal cost. An application of problem SET in surgical scheduling is discussed.