Participatory ergonomic intervention for prevention of low back pain: assembly line redesign case

This paper gives an overview of a participatory ergonomic intervention aimed at reducing low back pain cases in the dispatch department of a catalogue and e-commerce retail company. Based on the findings of the ergonomic analysis and design committee, the company's own employees redesigned the assembly line's layout. As a result of these changes two job tasks that involved manual material handling of boxes, identified by the revised NIOSH equation as posing an increased risk for lifting-related low back pain, were totally eliminated, and the employees responsible for moving boxes from the end of the assembly line to pallets on the ground were given more control over their jobs, and these jobs were also enriched with a new, less heavy task. These results demonstrate that participatory ergonomic interventions are a viable and effective strategy to reduce the exposure to work-related physical and psychosocial risk factors for low back pain.     

Association between repetitive work and occupational cold exposure

Occupational cold exposure is an important risk factor that increases stress at work and can induce many health effects like diseases and symptoms related to cold, including work-related musculoskeletal disorders. The methodological procedures were performed to measure these environmental variables as recommended by the ISO 7726/85. For the analysis of repetitiveness was used the OCRA checklist and evaluation of musculoskeletal morbidity conducted by the Nordic Musculoskeletal Questionnaire. So the objective of this study was to investigate the correlation between cold environmental variables and prevalence of musculoskeletal morbidity in the repetitive work. Was found association between work in cutting and boning sector (occupational cold and repetitive work) and the presence of musculoskeletal morbidity, with a significance of 99%.     

Identification of the mental workload of public employees in the administrative sector at a public university

In the workplace there are risk factors that can overwhelm the health of the worker causing physical and psychological disorders. Among these disorders, is occupational stress. Thus, this research proposes to measure the mental workload of job stress from the identification of demand, control and social support. It is an observational cross-sectional epidemiological character, performed with the Rectory office workers at the State University of West Paraná (Unioeste). Data collection was due to the application of the "Job Stress Scale" (JSS) and in its reduced version adapted to Portuguese. The survey sample consisted of 44 individuals. Statistical analysis was correlated inversely with medium intensity (r = -0.404) between age and social support. For males was found between control and age (r = 0.603). According to the data obtained, we conclude that most workers are exposed to passive work, leading to loss of skills or disinterest in the job. This study highlights the importance of research in the area and the need for new actions that change the conditions of stress at work.     

Anthropometric analysis of wheelchair users: methodological factors which influence interpopulational comparison

This study identified the factors existing in the methods and techniques used in the anthropometric analysis of wheelchair users which may adversely affect inter-population comparisons. Five studies of anthropometric analysis of wheelchair users were examined: Nowak (1996), Jarosz (1996), Das and Kozey (1999), Kozey and Das (2004) and Paquet and Feathers (2004). All the selected studies presented intra- and inter-population data. After having identified the methods and techniques cited, a comparison was made between the procedures used by these authors and those adopted by Barros (2007). The results indicate that inter-population comparison is valid only when there is similarity between the procedures and techniques used to collect data and the functional characteristics of the people evaluated.     

Using digital photogrammetry to conduct an anthropometric analysis of wheelchair users

This study deals with using digital photogrammetry to make an anthropometric analysis of wheelchair users. To analyse the data, Digita software was used, which was made available by means of the agreement of the Design Department of the Federal University of Pernambuco--Brazil--with the Department of Ergonomics of the Technical University of Lisbon--Portugal. Data collection involved a random sample of 18 subjects and occurred in the Biomechanics Laboratory of the Maurice of Nassau Faculty, located in Recife, Pernambuco. The methodology applied comprises the steps of Ergonomic Assessment, Configuration of the Data Base, Taking Digital Photographs, Digitalising the Coordinates and Presentation of Results. 15 structural variables related to static anthropometry were analysed, and 4 functional range variables relating to dynamic anthropometry. The results were presented by analysing personal data, classified by gender, ethnicity and age; by functional analysis of the sample, classified by clinical diagnosis, results of assessing the joints, results of the evaluation through motion and postural evaluation; and of the analysis of the anthropometric sample, which indicated for each variable the number of people, the mean, the standard deviation, and the minimum, median and maximum values.     

The role of usability in the evaluation of accidents: human error or design flaw?

This article aims to highlight the role of consumer products companies in the heart and the extent of accidents involving these types of products, and as such undesired events take part as an agent in influencing decision making for the purchase of a product that nature on the part of consumers and users. The article demonstrates, by reference, interviews and case studies such as the development of poorly designed products and design errors of design can influence the usage behavior of users, thus leading to accidents, and also negatively affect the next image of a company. The full explanation of these types of questions aims to raise awareness, plan on a reliable usability, users and consumers in general about the safe use of consumer products, and also safeguard their rights before a legal system of consumer protection, even far away by the CDC--Code of Consumer Protection.     

Using environmental affordances to direct people natural movement indoors

Understanding and predicting people's displacement movement is particularly important for professionals involved in planning complex buildings (e.g., hospitals, convention centers, subway stations and university campus). Some decisions taken by the visitors while choosing what route to follow can be influenced by some environmental cues which can act as a factor of attraction, influencing the wayfinding process. Therefore, the main objective of this study was to evaluate the hypotheses that, in the context of a simulated emergency egress, people prefer to move along either a wider and with more lighting corridor or to bear right. To collect the users' responses, a constant stimulus method was used, combined with a two forced choices method, involving the projection of stereoscopic images in a wall-screen. Results suggest that, in a "T-type" intersection, users randomly chose which direction to follow. However, if there is an increment in the width of the side corridor, users tend to follow the wider corridor. When light is inserted, users also prefer to choose the corridors with more lighting. In situations where the variables corridor width and existence of lighting are concurrent, the corridors with light are the most chosen by the users.     

Embedded systems engineering for products and services design

Systems engineering (SE) professionals strive to develop new techniques to enhance the value of contributions to multidisciplinary smart product design teams. Products and services designers challenge themselves to search beyond the traditional design concept of addressing the physical, social, and cognitive factors. This paper covers the application of embedded user-centered systems engineering design practices into work processes based on the ISO 13407 framework [20] to support smart systems and services design and development. As practitioners collaborate to investigate alternative smart product designs, they concentrate on creating valuable products which will enhance positive interaction. This paper capitalizes on the need to follow a user-centered SE approach to smart products design [4, 22]. Products and systems intelligence should embrace a positive approach to user-centered design while improving our understanding of usable value-adding, experience and extending our knowledge of what inspires others to design enjoyable services and products.     

Biomechanical strain of goldsmiths

The work of the goldsmiths consists in the manufacture of jewelry. The piece, be it an earring, bracelet or necklace, is hand-assembled. This task requires precision, skill, kindness and patience. In this work, we make use of tools such as cuticle clippers and rounded tip, beads or precious stones and also pieces of metal. This type of activity requires a biomechanical stress of hands and wrists. In order to quantify the biomechanical stress, we performed a case study to measure the movements performed by an assembly of pieces of jewelry. As method for research, filming was done during assembly of parts to a paste, using a Nikon digital camera, for 1 (one) hour. The film was edited by Kinovea software, and the task was divided into cycles, each cycle corresponds to a complete object. In one cycle, there are four two movements of supination and pronation movements of the forearm. The cycle lasts approximately sixteen seconds, totaling 1800 cycles in eight hours. Despite the effort required of the wrists, the activity shows no complaints from the employees, but this fact does not mischaracterizes the ability of employees to acquire repetitive strain injuries and work-related musculoskeletal disorders.