构建局队和谐关系才能促进统计事业发展

中央组建各级直属调查队是国务院加强统计工作的一项重大举措,其主要目的是增强国家统计的权威,提高统计的可信性,提高统计数据质量,提高统计工作抗干扰的能力。因为,在实际工作中,对统计的干扰是客观存在的。统计工作只对统计数据的真实性负责,而不能对项目的合法性和合理性负责。为了减少这种干扰,国务院决定把各地的三支国家调查队彻底独立升格,组建垂直国家管理的国家直属调查队,这是我国统计管理体制的重大改革,意义深远。随着时间推移,其作用和影响将会充分体现。一、正确认识局队的任务与职责国家统计局各级调查队既是国家统计局直属…     

深圳十年规划建设理论与实践初探

本文根据深圳十年规划与建设经验,对市场经济条件下的城市规划理论、乡镇城市化、开放型城市的交通与电讯网络、城市生态环境的保护、投资软硬环境的建设,以及如何提高城市规划的科学水平等问题作了探讨。     

飞灰冲蚀条件下材料抗磨性能的试验研究

本文首先综述了国内外学者在研究塑性材料耐冲蚀磨损性能方面所取得的主要成果,并在专门建立的灰磨试验台上,对电站燃煤锅炉对流受热面常用材料20号钢、12Cr_1MoV合金铜以及铜、铝四种塑性材料进行了耐飞灰冲蚀磨损性能的试验研究。提出用材料的体积磨损率来定义材料的耐冲蚀磨损性能系数。并用它表征塑性材料的抗磨性能。该系数可直接应用于计算燃煤锅炉对流受热面的安全烟速。     

Reference priors for a product of normal means when variances are unknown

The reference priors of Berger and Bernardo (1992) are derived for normal populations with unknown variances when the product of means is of interest. The priors are also shown to be Tibshirani's (1989) matching priors.     

伽马分布的形状参数的一种估计

本文利用服从伽马分布的随机变量 X 与其逆 X~(-1)的协方差只与形状参数有关这一性质,给出伽马分布形状参数的所谓自逆协方差估计,进而构造了相应的无偏估计,并证明了这类估计的大样本性质:强相合性以及渐近正态性。     

球墨铸铁曲轴的气体软氮化

柴油机的珠墨铸铁曲轴系重要零件,气体软氮化应用到球墨铸铁领域还是一种新工艺,而且比中频淬火效果好,提高了曲轴的抗疲劳和抗磨损的能力。本文对气体软氮化的基本原理、设备、工艺参数的选择和催渗方法进行了探讨,对软氮化后曲轴的尺寸形状误差、光洁度和机械性能的提高等进行了较详细的试验、分析和比较,结果,经气体软氮化后的曲轴不但尺寸形站误差符合图纸要求外,而且抛去轻微氧化层后光洁度还略有提高,曲轴安全系数由1.3～1.6提高到1.70～1.77,并且一般不再发生疲劳断(?),使用寿命比原来寿命增加3.32倍以上。     

六端口技术自校准方法解的不唯一性证明

本文就六端口技术自校准方法进行了分析讨论,用解析方法和计算机模拟方法分别证明了自校准方法解的不唯一性.从而否定了自校准方法是六端口技术最突出的优点之一这个传统概念.     

Weighted local linear composite quantile estimation for the case of general error distributions

It is known that for nonparametric regression, local linear composite quantile regression (local linear CQR) is a more competitive technique than classical local linear regression since it can significantly improve estimation efficiency under a class of non-normal and symmetric error distributions. However, this method only applies to symmetric errors because, without symmetric condition, the estimation bias is non-negligible and therefore the resulting estimator is inconsistent. In this paper, we propose a weighted local linear CQR method for general error conditions. This method applies to both symmetric and asymmetric random errors. Because of the use of weights, the estimation bias is eliminated asymptotically and the asymptotic normality is established. Furthermore, by minimizing asymptotic variance, the optimal weights are computed and consequently the optimal estimate (the most efficient estimate) is obtained. By comparing relative efficiency theoretically or numerically, we can ensure that the new estimation outperforms the local linear CQR estimation. Finite sample behaviors conducted by simulation studies further illustrate the theoretical findings.     

我国政府统计中多层次推断问题讨论

当前,多层次推断问题已成为我国在政府统计中推广抽样调查所面临的最大难题。本文回顾了现有解决多层次推断问题的方法,指出这些方法在使用上的限制;提出从改进估计的角度解决多层次推断问题,讨论了借助辅助信息改进估计的方法和建立统计模型进行推估的方法,并指出各种方法的优劣和适用情况;简要探讨了大数据背景下对解决多层次推断问题的一些启示。     

Storage Life Prediction for a High-Performance Capacitor Using Multi-Phase Wiener Degradation Model

Capacitance is a critical performance characteristic of high-voltage-pulse capacitor which is used to store and discharge electrical energy rapidly. The capacitors usually are stored for a long period of time before put into use. Experimental result and engineering experience indicate that the capacitance increases with storage time and will eventually exceed the failure threshold, which means that the capacitor may fail during storage. This is a typical mode of degradation failure for long storage products. Further, the capacitance degradation path can be extrapolated in several stages based on the shifting characteristics. That is, the capacitance increases slowly or fluctuates in the initial storage stage that lasts about three months. Then it increases sharply in the middle stage which lasts about four months. After the two stages, the capacitor enters into the third stage in which capacitance increases constantly. This degradation phenomenon motivates us to study the storage life prediction method based on multi-phase degradation path model. The storage performance degradation mechanism of high-voltage-pulse capacitor was investigated, which provides the physical basis for multi-phase Wiener degradation model. Identification procedure for the transition points in the degradation path was proposed using maximum likelihood principle (MLP). The result of Kruskal-Wallis test which is the method to test whether two populations are consistent or not in statistics showed that the transition points are statistically effective. Other parameters in the multi-phase degradation model are estimated with maximum likelihood estimation (MLE) after the transition points have been specified. The multi-phase Inverse Gaussian (IG) distribution for storage life was deduced for the capacitor, and the point and interval estimation procedure for reliable storage life are constructed with bootstrap method. The efficiency and effectiveness of the proposed multi-phase degradation model is compared with storage life prediction under single-phase condition.