Casting an ergonomic eye on university libraries

Research in the field of Ergonomics of the Built Environment has been developed with a view to consolidating studies in this area, the objective of which is to provide evidence that the joint participation of users and designers on drawing up projects is important. In this context, the theme of this study is to investigate the interactions between users and the environment in a university library. To do so, well-established techniques from Ergonomics, Architecture and Environmental Psychology were used to make a functional and behavioral evaluation to identify the level of user satisfaction in six libraries in the various study centers of the Federal University of Pernambuco in Recife, northeast Brazil, so as to identify the strengths and also weaknesses in these spatial structures.     

Biomechanics-based active control of bedding support properties and its influence on sleep

Proper body support plays an import role in the recuperation of our body during sleep. Therefore, this study uses an automatically adapting bedding system that optimises spinal alignment throughout the night by altering the stiffness of eight comfort zones. The aim is to investigate the influence of such a dynamic sleep environment on objective and subjective sleep parameters. The bedding system contains 165 sensors that measure mattress indentation. It also includes eight actuators that control the comfort zones. Based on the measured mattress indentation, body movements and posture changes are detected. Control of spinal alignment is established by fitting personalized human models in the measured indentation. A total of 11 normal sleepers participated in this study. Sleep experiments were performed in a sleep laboratory where subjects slept three nights: a first night for adaptation, a reference night and an active support night (in counterbalanced order). Polysomnographic measurements were recorded during the nights, combined with questionnaires aiming at assessing subjective information. Subjective information on sleep quality, daytime quality and perceived number of awakenings shows significant improvements during the active support (ACS) night. Objective results showed a trend towards increased slow wave sleep. On the other hand, it was noticed that % N1-sleep was significantly increased during ACS night, while % N2-sleep was significantly decreased. No prolonged N1 periods were found during or immediately after steering.     

Ergonomic basket design to reduce cumulative trauma disorders in tea leaf plucking operation

Work related musculoskeletal disorders are seen as an indicating parameter of occupational stress among the women workers engaged in tea leaf plucking operation. The hand plucking (no mechanized plucking is practiced in Assam) being a highly repetitive task requires forceful exertions to reach to the distant periphery of the tea bushes and mechanical compression (pressing against hard surfaces). Specifically it aggravates with awkward positions adopted. The current research addresses to minimize the risk factors associated with CTDs and to ascertain the role of ergonomic design development in improving the situation. Women workforce engaged in tea industry in Assam suffer from back, shoulder, arm and finger pains. Workers perform the activity for 440 minutes in the entire shift with one hour lunch break in between in the garden itself. An ergonomic investigation aiming at studying the strain index of plucking operation in tea industry was conducted. While performing the operation workers were found to assume unnatural posture which is static as well as highly dynamic with a load (tea leaf collecting basket up to weight of 30 kg when filled with plucked leaves) at back. With gradual increment of load and pain though the load is released intermittently the strain level found to remain at a high level. The total QEC scores found for plucking activity was 110 out of 138. To improve the situation and to reduce the work related upper limb disorder (WRULD) an ergonomically designed basket was conceived and trial results showed improvements. The newly designed plucking basket fits the back curvature of the workers well, which keeps the basket in place unlike the existing round basket. The new basket is light in weight having more leaf capacity. Significant reduction in energy expenditure and MSDs suffered was observed while using improved basket over existing basket.     

Adaptive information design for outdoor augmented reality

Augmented Reality focuses on the enrichment of the user's natural field of view by consistent integration of text, symbols and interactive three-dimensional objects in real time. Placing virtual objects directly into the user's view in a natural context empowers highly dynamic applications. On the other hand, this necessitates deliberate choice of information design and density, in particular for deployment in hazardous environments like military combat scenarios. As the amount of information needed is not foreseeable and strongly depends on the individual mission, an appropriate system must offer adequate adaptation capabilities. The paper presents a prototypical, vehicle-mountable Augmented Reality vision system, designed for enhancing situation awareness in stressful urban warfare scenarios. Tracking, as one of the most crucial challenges for outdoor Augmented Reality, is accomplished by means of a Differential-GPS approach while the type of display to attach can be modified, ranging from ocular displays to standard LCD mini-screens. The overall concept also includes envisioning of own troops (blue forces), for which a multi-sensor tracking approach has been chosen. As a main feature, the system allows switching between different information categories, focusing on friendly, hostile, unidentified or neutral data. Results of an empirical study on the superiority of an in-view navigation cue approach conclude the paper.     

How to reduce workload--augmented reality to ease the work of air traffic controllers

In the future the air traffic will rise--the workload of the controllers will do the same. In the BMWi research project, one of the tasks is, how to ensure safe air traffic, and a reasonable workload for the air traffic controllers. In this project it was the goal to find ways how to reduce the workload (and stress) for the controllers to allow safe air traffic, esp. at huge hub-airports by implementing augmented reality visualization and interaction.     

Screening of risk from patient manual handling with MAPO method

International standards highlight the steps required by risk assessment and involving first hazard identification, then risk evaluation and finally, if necessary, risk assessment. To check approach appropriateness to "risk evaluation" from manual patient handling through MAPO, a cross study was carried out in view of checking relationship between this new risk assessment model and occurrence of acute low back pain. After proper training the MAPO screening method was assessed in 31 wards, 411 exposed subjects of geriatric hospitals. At the same time health data were collected on occurrence of low back pain episodes during the last year both in the exposed subjects' group and the external reference group (n?237). Risk and clinical assessment data were tutored and checked by EPM research unit. The logistic analysis was used as a method to evaluate the relationship between risk index and acute low back pain. Investigating relationship between acute low back pain episodes and levels of MAPO screening index, carried out only with the people exposed who claimed to work for at least 30 hours per week (n = 178), showed definitely positive trends. The study results indicate that MAPO screening may represent a useful tool to estimate the risk from manual handling patients.     

An ergonomic approach to improve work conditions of older employees in social housing

French companies are legally required to develop action plans to improve employment and work conditions for older workers ("plans seniors"). These plans contain measures oriented towards recruiting, career evolution, skills developme1nt, knowledge transmission and improvement of work conditions. A tool for assessing work situations experienced by council buildings caretakers ("gardiens") was used in such a plan on behalf of the main agency of council housing in Paris, and we developed. This assessment tool was developed after ergonomic work analysis on a sample of 36 older caretakers (age > 57 y.o). The technical inspectors in charge of technical interventions on buildings and managing caretakers were trained to use the assessment tool and apply it to all caretakers aged 50 and over.     

Designing the safety of healthcare. Participation of ergonomics to the design of cooperative systems in radiotherapy

This communication deals with the involvement of ergonomists in a research-action design process of a software platform in radiotherapy. The goal of the design project is to enhance patient safety by designing a workflow software that supports cooperation between professionals producing treatment in radiotherapy. The general framework of our approach is the ergonomics management of a design process, which is based in activity analysis and grounded in participatory design. Two fields are concerned by the present action: a design environment which is a participatory design process that involves software designers, caregivers as future users and ergonomists; and a reference real work setting in radiotherapy. Observations, semi-structured interviews and participatory workshops allow the characterization of activity in radiotherapy dealing with uses of cooperative tools, sources of variability and non-ruled strategies to manage the variability of the situations. This production of knowledge about work searches to enhance the articulation between technocentric and anthropocentric approaches, and helps in clarifying design requirements. An issue of this research-action is to develop a framework to define the parameters of the workflow tool, and the conditions of its deployment.     

Interviewing children versus tossing coins: accurately assessing the diagnosticity of children's disclosures of abuse

We describe a Bayesian approach to evaluating children's abuse disclosures and review research demonstrating that children's disclosure of genital touch can be highly probative of sexual abuse, with the probative value depending on disclosure spontaneity and children's age. We discuss how some commentators understate the probative value of children's disclosures by: confusing the probability of abuse given disclosure with the probability of disclosure given abuse, assuming that children formally questioned about sexual abuse have a low prior probability of sexual abuse, misstating the probative value of abuse disclosure, and confusing the distinction between disclosure and nondisclosure with the distinction between true and false disclosures. We review interviewing methods that increase the probative value of disclosures, including interview instructions, narrative practice, noncontingent reinforcement, and questions about perpetrator/caregiver statements and children's reactions to the alleged abuse.