Ergonomic work analysis of urban bus drivers in Rio de Janeiro city

This article is the result of a case study on ergonomic work analysis carried out in an urban bus company located in Ilha do Governador, Rio de Janeiro. The methodology used in this work follows the French-tradition Ergonomic Analysis of the Work (EWA) combined with the best tradition from anglo-saxon ergonomic work analysis. The situated diagnosis was performed to provide relevant information about the work conditions of a bus driver.     

Thermal comfort and personal protective equipment (PPE)

Personal Protective Equipment (PPE) is considered the last preferred solution to an Occupational Safety Health (OSH) system. Brazilian OSH legislation assumes and requires PPE usage to neutralize the possibility of pesticide contamination. This study examines the inadequacy of the PPE used in a tomato crop, particularly from the standpoint of thermal comfort. This study made observations regarding heart rate and body temperature in a controlled environment using a treadmill (with and without PPE) of 12 volunteers; and during the process of rural labor (at rest and in normal work routine) of 2 actual rural workers. Comparing the results of the treadmill test (with and without PPE) which tried to reproduce the same level of effort and environmental conditions of the actual rural work, this study demonstrated that PPE makes thermoregulation harder and tympanic temperature reaches higher values with the same level of effort. Moreover, body temperature increases quickly: with PPE it took 15 minutes to raise 1°C in body temperature, compared to 40 minutes without PPE. The results of this study indicated that the use inadequate PPE might pose thermoregulation risk to rural workers.     

Ergonomic factors and production target evaluation in eucalyptus timber harvesting operations in mountainous terrains

There are several forest operations involved in Eucalyptus timber harvesting. This study was carried out during brush-cutting; tree felling, bucking, delimbing, piling and manual extraction operations, with the following objectives: a) analyzing, ergonomically, two systems of brush-cutting: one manual and the other semi-mechanized, using two different machines; b) ergonomically evaluating three different brands of pruner machines used in delimbing felled trees. c) determining the feasible target of productivity as a function of ergonomic factors relevant to establish the time of resting pauses for workers in manual and semi-mechanized timber harvesting systems in mountainous terrain. Brush-cutting, either manual or semimechanized, is an activity carried out prior to timber harvesting. It is usually a hard work, with low productivity when compared with mechanized systems. Pruner machines have been used by forest companies, due to the great possibilities to improve productivity, quality and the health of workers. Ergonomics is a discipline that promotes the adequacy of work to the physical and mental characteristics of human beings, seeking to design production systems and products considering relevant aspects, including social, organizational and environmental factors. Companies should consider the ergonomic factor in the determination of daily worker production targets.     

Perceptual aspects of the use of faucets (taps)

This paper presents an assessment with simulated activities with the aim of analyzing the perception of ease / difficulty of the use of faucets (taps) handles by 180 Brazilian adults. Five different handles faucets were activated for subsequent collection of perceptual data. The procedures were based on main recommendations for biomedical ethics and human research. The results indicate that handles with levers are significantly (p ≤ 0.05) easier to use. The most difficult are characterized by not having support points for the rotation (levers) or more points of pressure concentration in the hand.     

Visualization of regulations to support design and quality control--a long-term study

The aim of the study was to visualize design regulations of furniture by means of interactive technology based on earlier studies and practical examples. The usage of the visualized regulations was evaluated on two occasions: at the start when the first set of regulations was presented, and after six years of usage of all regulations. The visualized regulations were the result of a design process involving experts and potential users in collaboration with IKEA of Sweden AB. The evaluations by the different users showed a very positive response to using visualized regulations. The participative approach, combining expertise in specific regulations with visualization of guidelines, resulted in clear presentations of important regulations, and great attitudes among the users. These kinds of visualizations have proved to be applicable in a variety of product areas at IKEA, with a potential for further dissemination. It is likely that the approaches to design and visualized regulations in this case study could function in other branches.     

Proper manual handling techniques to prevent low back pain, a Cochrane systematic review

Training and provision of assistive devices are considered major interventions to prevent and treat low back pain (LBP) among workers exposed to manual material handling (MMH). To establish the effectiveness of training and provision of assistive devices in preventing and treating LBP an update of a Cochrane literature review was performed to November 2010. Randomised controlled trials (RCTs) and cohort studies with a concurrent control group (CCTs) were included. Nine RCTs (20.101 employees) and nine CCTs (1280 employees) were included for prevention: six more than in the previous version. No study on treatment was found. None of the included RCTs and CCTs provided evidence that training and provision of assistive devices prevented LBP when compared to no intervention or another intervention.     

Influence of door handles design in effort perception: accessibility and usability

The application of ergonomics in product design is essential to its accessibility and usability. The development of manual devices should be based on ergonomic principles. Effort perception analysis is an essential approach to understand the physical and subjective aspects of the interface. The objective of the present study was to analyze the effort perception during a simulated task with different door handles by Portuguese subjects of both genders and different ages. This transversal study agreed with ethical aspects. 180 subjects of both genders pertaining to three age groups have participated. Five door handles with different shapes were evaluated. A subjective numeric rating scale of 5 levels was used to evaluate the effort. For statistical analysis it was applied the Friedman non-parametric test. The results have showed no significant differences of effort perception in door handles "A" and "B"; "A" and "D"; and "D" and "C". Door handle "E" presented the lowest values of all. In general, there's an inverse relationship between the results of biomechanical studies and the effort perception of the same task activity. This shows that door handles design influence directly these two variables and can interfere in the accessibility and usability of these kinds of products.     

Are cutout handles used when available in real occupational settings? Description of grips and upper extremities movements during industrial box handling

In order to achieve better postures and decrease musculoskeletal risks adequate design of hand/box couplings for manual materials handling (MMH) are still needed. No studies evaluating upper limb movement thorough direct measurements during box handling in workplace were identified in the literature. In this study we describe the types of grip and movements adopted by ten workers when handling redesigned boxes with cutout handles between different heights on industrial pallets. The new handles were used by 90% of the workers through different types of grip. Electrogoniometric measurements showed relatively safe forearm and wrist movements, although elbow inadequate range of movement was recorded. Despite the good acceptance of the cutout by workers, the new design requires extra internal space in the boxes reducing applications for this alternative of box.     

Ergonomics and design: traffic sign and street name sign

This work proposes a design methodology using ergonomics and anthropometry concepts applied to traffic sign and street name sign projects. Initially, a literature revision on cognitive ergonomics and anthropometry is performed. Several authors and their design methodologies are analyzed and the aspects to be considered in projects of traffic and street name signs are selected and other specific aspects are proposed for the design methodology. A case study of the signs of "Street of Antiques" in Porto Alegre city is presented. To do that, interviews with the population are made to evaluate the current situation of signs. After that, a new sign proposal with virtual prototyping is done using the developed methodology. The results obtained with new interviews about the proposal show the user satisfaction and the importance of cognitive ergonomics to development of this type of urban furniture.     

Ergonomics analysis of the productive environment of fashion clothing firm in Belo Horizonte-MG

A company making women's clothing, located in Belo Horizonte, Minas Gerais was studied in its ergonomic aspects with regard to the layout. With this study it was possible to establish the best positioning of machines and jobs of employees. The analysis criteria used were: frequency of use, functional grouping, sequence of use, flow and intensity of preferred connections. An ideal arrangement in the workplace provides improved manufacturing quality and employee performance and consequently higher production yields.