Development of an integrated information management model: A case of textile industry

For past two decades many organisations have tried to implement integrated information management systems for better production management based on co-ordination of information and therefore activities of different departments. Although Enterprise Resource Planning systems have been in the market for the past decade, many industries find it difficult to implement such systems due to the amount of work involved in streamlining the documentation, customisation and of high costs reported in implementation. An attempt is made through this paper to propose an integrated model, which can be easily understood by production personnel, with specific emphasis on the textile sector.     

On vendor part delivery dates in a stochastic assembly system

This paper describes the development of a model for the determination of optimal mean part delivery dates in a stochastic assembly system for the objective of minimizing the expected cost of subassembly and part inventory. Parts are assembled at each station to a subassembly. The part delivery and processing times at assembly stations follow known probability distributions. An approximate solution technique based on the optimization of individual stations in isolation is developed. The approximation applies a correction factor, as a function of the variability in part delivery and processing time, cost parameters and number of stations, to the decisions from the single station solutions to compensate for interdependence between stations. Results indicate that this is an effective approach and yields good near-optimal solutions with very little computational effort. Insights regarding the effect of the type of distribution used, random processing times, variance of the distribution used and cost parameter values on part delivery dates are also reported.     

Environmental and social supply chain management sustainability practices: construct development and measurement

The purpose of this paper is to conceptualise and operationalise the concept of supply chain management sustainability practices. Based on a multi-stage procedure involving a literature review, expert Q-sort and pre-test process, pilot test and survey of 156 supply chain directors and managers in Ireland, we develop a multidimensional conceptualisation and measure of social and environmental supply chain management sustainability practices. The research findings show theoretically sound constructs based on four underlying sustainable supply chain management practices: monitoring, implementing systems, new product and process development and strategy redefinition. A two-factor model is then identified as the most reliable: comprising process-based and market-based practices.     

Modular design of integrated databases in production management systems

Abstract

Complexity is a serious problem with respect to the application of information technology in the field of production management. This paper presents an overview of the more fundamental problems encountered and proposes a solution for some of those problems in the form of modular decomposition of the conceptual database structure. It is argued that the complexity of information systems is closely connected to the complexity of the organization. Therefore a condition for the realization of integrated information systems for production management is a simplification of the organizational structure by way of defunctionalization and the forming of autonomous units.     

New developments in generative BOM processing systems

Abstract

The principle of generative bill-of-material (BOM) processing systems is that different BOMs belonging to different product variants can be represented by a single, so-called source BOM. The BOM processing systems comprise additional data structures which hold information on the relationships between product characteristics of parent product variants and component product variants, and on the relationships between characteristics of a parent product variant and its BOM data. These relationships allow the automatic generation of the individual BOM of each represented product variant. There are several alternative ways of implementing a generative BOM processing system. The oldest concept known is the variant BOM concept. This concept provides a relatively simple solution to deal with large varieties of final product variants. However the concept has a number of drawbacks such as the representation of product variety at lower levels in the product structure and data redundancy which hampers data maintenance. In this paper an improved concept for generative BOM processing systems is introduced and described: the generic BOM concept. The generic BOM concept does not focus on representing final product variants only, but takes a broader view towards representing any range of product variants at any level in the product structure. This starting point solves a number of draw-backs implied by the variant BOM concept but it also requires new definitions of BOM relationships and the introduction of new data structures to support the generation of individual BOMs.     

Setups and effective capacity: the impact of lot sizing techniques in an MRP environment

This study investigates how lot sizing techniques influence the profit performance, inventory level, and order lardiness of an assembly job shop controlled by MRP. Four single-level lot sizing techniques are compared by simulation analysis under two levels of master schedule instability and two levels of end item demand. A second analysis investigates the influence of a multilevel lot sizing technique, the generalized constrained-K (GCK) cost modification, on the four single-level techniques at low demand and low nervousness. The analyses reveal a previously unreported phenomenon. Given the same inventory costs, the single-level lot sizing techniques generate substantially different average batch sizes. The lot sizing techniques maintain the following order of increasing average batch size (and decreasing total setup time):

economic order quantity (EOQ)

period order quantity (POQ)

least total cost (LTC)

Silver-Meal heuristic (SML)

The causes for different average batch sizes among the lot sizing techniques are analysed and explained. Demand lumpiness, inherent in multilevel manufacturing systems controlled by MRP, is found to be a major factor. The number of setups each lot sizing technique generates is the primary determinant of profit performance, inventory level, and order tardiness. EOQ, a fixed order quantity technique, is less sensitive to nervousness than the discrete lot sizing techniques. EOQ_, however, generates the smallest average batch size, and, therefore, the most setups. Since setups consume capacity, EOQ, is more sensitive to higher demand. SML generates the largest average batch sizes, and is, therefore, less sensitive to increased demand. At low demand, the other lot sizing techniques perform better on all criteria. They generate smaller batches and, therefore, shorter actual lead times. The GCK cost modification increases the average batch size generated by each lot sizing technique. GCK improves the profit and customer service level of EOQ the lot sizing technique with the smallest batches. GCK causes the other lot sizing techniques to generate excessively large batches and, therefore, excessively long actual lead times.     

Hierarchical model to design manufacturing systems applied to a metal-mechanic company

This paper describes the application of a model to design and manage the manufacturing process through an integrated system, using a Hierarchical methodology-by means of different aggregation and disaggregation stages with an appropriate time horizon. The hierarchical model obtained allows interfacing between the master schedule and the schedule of the orders. At each level of the hierarchical model some decisions have to be made in order to design the manufacturing system, but having a model that also takes into consideration the management of the system. To do this it is necessary to use aggregated information concerned with the level at which decisions are made. It is obtained from the database, which contains the information at the highest level of aggregation. This model has been applied to a metal mechanic company, that makes final products such as car washers, etc. The benefits of this approach for the company are addressed in this paper.     

The value of rescheduling functionality within standard MRP packages

One of the basic functions of an MRP system is to issue rescheduling messages that urge the planner tospeed up or slow down open orders. It seems in practice that these messages are not used at all by planners. This is mostly due to the inaccuracy of MRP, that more or less ignores safety time, safety stocks and lotsize flexibility in the calculation of reschedule-in messages. Reschedule-out messages are usually ignored because planners do not see the value of the message. Other reasons for not adhering to rescheduling messages are a lack of maintenance of MRP parameters or simply the wrong use of the MRP function. In the future, MRP rescheduling functionality will be used even less than today, due to the changing role of MRP within the planning framework. With the uprise of finite capacity scheduling packages, MRP is being pushed one level upward in the planning hierarchy. This means that rescheduling functionalities for the short term will become completely obsolete in MRP systems.     

Interview with martyn sloman

This interview, with one of the key advisors to the UK's Chartered Institute of Personnel and Development, presents a wide ranging view of the changes in the field of learning, training and development over the past twenty years. It notes the shift from the top down interventions that characterised training, to processes within the domain of the learner. It outlines the biggest challenges going forward including the ever-widening range of stakeholders involved in delivering the human resource agenda and the changing shape of the people and development profession itself.     

Better know an HRD scholar: a conversation with Monica Lee

This article contains a conversation with Monica Lee, and is part of a series that focuses on different HRD scholars – the aim being to better understand the people behind the names we see in print. Monica is a Life Member of Lancaster University, was a founding member of the University Forum of HRD, and was the founding editor of Human Resource Development International. The conversation explores Monica's background, how she got into HRD, how she overcame dyslexia and recovered from her cerebral hemorrhage, how the University Forum was created, and how HRDI came about. The conversation also considers the consequences of placing boundaries around HRD, about how we are guided by our subconscious, and about the impact on HRD of future changes to organizations and structures.